Duplicate Payment Advices

SAP Experts,
We implemented ACH functionality we have it set up that when it is a check run to print Check Payment advices, and when we run ACH to print Payment advice for ACH.
The problem is that we are getting 2 copies of each, I have checked my variant and under number of sample print outs is set to "0" but we are still getting 2 copies. This only happens when we print, when the payment goes out via fax or e-mail is only one copy.
I am I missing anything?

We fixed this issue we had some extra BTE that were not needed the only BTE needed was 2040 for fax and e-mail, not printing

Similar Messages

Duplicate payments and general error advice

In EBS 11 what is the best way to identify duplicate payments?
I am not from an accountancy background but what happens if someone identifies a duplicate payment, is there any data in the database that may show "it was dealt with"?
Also, aside from genuine error duplicate payments - what other checks and areas should be analyzed to check the business hasnt lost money through error? Any tips?

Hello.
Can you please explain your idea in more detail?
EBS does not allow to enter duplicate payments.
Octavio

Attaching a document along with payment advice during F110

Hi All,
when i run F110 all payments with payment mode 'T'(telegraphic) are mailed to the respective vendors and all payments with mode 'K'(Credit) are displayed in the spool(SP01).
Now the requirement is that the contract of the vendor(contract document is attached in the vendor master-FK02) should also me mailed along with the payment advice.
I created a Z-program(copied from RFFOEDI1) which downloads this contract document from vendor master onto the desktop and then uploads this and sends it to the customer.
However when i do this the mail request for the contract document is being generated(as can be seen in the send requests list (t-code SOSG) and the mail also gets triggered when i process it in SCOT), but no mail request is being generated for the payment advice .
Also no spool for payment advices with payment mode 'K' is generated in SP01.
Any help is appreciated and will be rewared generously.
Thanks in advance.
Najam
I am attaching the part of code i have inserted -
REPORT RFFOEDI1.
INCLUDE ZDWNLD_ATTA.
   F110ID-LAUFD   = ZW_LAUFD.
   F110ID-LAUFI   = ZW_LAUFI.
   F110ID-OBJKT   = KON_PARAM.
PERFORM F_MAIL_CONTRACT.
INSERT T012D-EDIPN INTO HEADER.
AT SELECTION-SCREEN ON PAR_WFOR.
IF PAR_WFOR NE SPACE.
    SET CURSOR FIELD 'PAR_WFOR'.
    CALL FUNCTION 'FORM_CHECK'
      EXPORTING
        I_PZFOR = PAR_WFOR.
ENDIF.
FORM F_MAIL_CONTRACT .
   F110ID-LAUFD   = ZW_LAUFD.
   F110ID-LAUFI   = ZW_LAUFI.
   F110ID-OBJKT   = KON_PARAM.
IMPORT SLKTAB FROM DATABASE RFDT(FB) ID F110ID.
READ TABLE SLKTAB INDEX 1.
IF SY-SUBRC = 0.
    W_LIFNR = SLKTAB-VONKT.
ENDIF.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = W_LIFNR
IMPORTING
   OUTPUT        = W_LIFNR .
*Get vendor Email Address
SELECT SINGLE * FROM LFA1 WHERE LIFNR = W_LIFNR.
IF SY-SUBRC = 0.
SELECT SINGLE * FROM ADR6 WHERE ADDRNUMBER = LFA1-ADRNR.
ENDIF.
W_RECIPIENT = ADR6-SMTP_ADDR.
PERFORM DOWNLOAD_ATT USING W_LIFNR.
PERFORM UPLOAD_ATT_SEND_MAIL USING W_RECIPIENT LTP_FILENAME .
ENDFORM.                    " F_MAIL_CONTRACT
FORM DOWNLOAD_ATT USING    P_W_LIFNR.
SO_INSTI = P_W_LIFNR.
SELECT * FROM SRGBTBREL INTO TABLE TA_SRGBTBREL
WHERE INSTID_A = SO_INSTI
    AND TYPEID_A = SO_TYPID
    AND CATID_A = SO_CATID.
IF SY-SUBRC EQ 0.
   SORT TA_SRGBTBREL BY INSTID_A TYPEID_A CATID_A.
   DELETE ADJACENT DUPLICATES FROM TA_SRGBTBREL
     COMPARING INSTID_A TYPEID_A CATID_A.
   LOOP AT TA_SRGBTBREL INTO WA_SRGBTBREL.
     PERFORM PROCESS_ATTACHMENTS
     USING WA_SRGBTBREL-INSTID_A
            WA_SRGBTBREL-TYPEID_A
            WA_SRGBTBREL-CATID_A.
   ENDLOOP.
ENDIF.
ENDFORM.                    " download_att
FORM UPLOAD_ATT_SEND_MAIL USING    P_W_RECIPIENT
                                    P_LTP_FILENAME.
RECEIVER = P_W_RECIPIENT.
PERFORM ML_CUSTOMIZE USING 'Tst' 'Contract'.
PERFORM ML_ADDRECP USING RECEIVER 'U'.
PERFORM UPL.
PERFORM DOCONV TABLES I_ITAB OBJBIN.
PERFORM ML_PREPARE USING 'X' EXTENSION NAME.
PERFORM ML_DOSEND.
FORM ML_CUSTOMIZE USING    OBJNAME
                            OBJDESC.
CLEAR DOCDATA.
REFRESH OBJPACK.
CLEAR OBJPACK.
REFRESH OBJHEAD.
REFRESH OBJTXT.
CLEAR OBJTXT.
REFRESH OBJBIN.
CLEAR OBJBIN.
REFRESH OBJHEX.
CLEAR OBJHEX.
REFRESH RECLIST.
CLEAR RECLIST.
REFRESH LISTOBJECT.
CLEAR LISTOBJECT.
CLEAR TAB_LINES.
CLEAR DOC_SIZE.
CLEAR ATT_TYPE.
DOCDATA-OBJ_NAME = OBJNAME.
DOCDATA-OBJ_DESCR = OBJDESC.
ENDFORM.                    " ml_customize
FORM ML_ADDRECP USING   PRECEIVER PREC_TYPE.
CLEAR RECLIST.
RECLIST-RECEIVER = PRECEIVER.
RECLIST-REC_TYPE = PREC_TYPE.
APPEND RECLIST.
ENDFORM.                    " ml_addrecp
FORM UPL .
FILE_NAME = LTP_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILE_NAME
FILETYPE = 'BIN'
TABLES
DATA_TAB = I_ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
PATH = FILE_NAME.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
COMPLETE_FILENAME = PATH
IMPORTING
EXTENSION = EXTENSION
NAME = NAME
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5.
ENDFORM.                    " upl
FORM DOCONV TABLES MYPDF STRUCTURE TLINE
                   OUTBIN STRUCTURE SOLISTI1.
DATA : POS TYPE I.
DATA : LEN TYPE I.
LOOP AT MYPDF.
POS = 255 - LEN.
IF POS > 134. "length of pdf_table
POS = 134.
ENDIF.
OUTBIN+LEN = MYPDF(POS).
LEN = LEN + POS.
IF LEN = 255. "length of out (contents_bin)
APPEND OUTBIN.
CLEAR: OUTBIN, LEN.
IF POS < 134.
OUTBIN = MYPDF+POS.
LEN = 134 - POS.
ENDIF.
ENDIF.
ENDLOOP.
IF LEN > 0.
APPEND OUTBIN.
ENDIF.
ENDFORM.                    " doconv
*&      Form ml_prepare
      text
FORM ML_PREPARE USING BYPASSMEMORY WHATATT_TYPE WHATNAME.
IF BYPASSMEMORY = ''.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
LISTOBJECT = LISTOBJECT
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC EQ 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
IN = LISTOBJECT
OUT = OBJBIN
EXCEPTIONS
OTHERS = 1
IF SY-SUBRC EQ 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
*Packing Info For Text Data
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'TXT'.
APPEND OBJPACK.
*Packing Info Attachment
ATT_TYPE = WHATATT_TYPE..
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
READ TABLE OBJBIN INDEX TAB_LINES.
OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = WHATNAME.
APPEND OBJPACK.
ENDFORM.                    " ml_prepare
*&      Form ml_dosend
      text
--> p1        text
<-- p2        text
FORM ML_DOSEND .
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X' "used from rel. 6.10
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
*IF SY-SUBRC EQ 0.
*MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
*WITH DOCDATA-OBJ_NAME.
*ENDIF.
ENDFORM.                    " ml_dosend

Hi,
As far as I remember there are no direct ways in SAP do to that.
One suggestion. Create a custom program to send emails and save it with a variant in DME (the last Tab in F110). This is the same place where you maintain the details for sending out the EDI information.
Once you are done with F110, you can carry out the print functionality to execute the program to send out emails with the payment advice.
hope this helps.
Regards

Vendor duplicate payment-Report

Dear Guru
I have an requirement to develop a report that can tell about vendor duplicate payment considering Partial payment and residual payment and full payment.Is there any standard report available ? O r I have to develop a new Custom report.If Custom report that how can i do this ?

Hi,
Standared report available to get Partial/Residual/full payment details T.Code: FBL1N
I think it is not satisfy your requirement, better to develop customized report by using tables BSIK,BSAK,BKPF
Regards
Viswa

Enable or disable payment advice to vendor

Hi
Is it possible to enable or disable the payment advice on vendor master data level?
We would like to control the distribution of payment advice on vendor level and not in the variant of the program RFFOEDI1.
Best regards
Birgit

Hi Gaurav
Good point. Unfortunately I am not allowed to remove email nor fax since we also use the information for other correspondence.
If fax or email is present on vendor master data we send by email/fax through SOST. If not, the print is send in a pdf file to an external partner for printing and distribution. I don't think there is a possibility to sort out parts of the files in this proces.
Best regards
Birgit

Duplicate Payment Report - AP

hi
i want to run report based on Duplicate Payment . which table contains this information? this report should return different and/ or the same vendors with the same invoice numbers, and/or identical payment amounts with different invoices and the same vendor -
any table contain this information?

Standard Extractor 0FI_AP_4 brings data from BSIK and BSAK.
you should be able to query data from InfoProviders based on this data source.
You might be able to use standard DSO 0FIAP_O03 for this.
If you have two or more clearing documents with the same invoice number, you might have some partial payments or duplicate payments.
You might want to involve your busienss users to find out the exact criteria to identify duplicate payments. It will be lot easier to meet the requirements if you try to understand the functional requirements from the business and then locate the fields that are needed for this purpose and try to come up with the correct logic for this.
Good Luck.
MP.

Payment Advice to Vendor Report Format

Dear Sap Guys,
This is the First time i am posting my queries i am currently in client place.
I would like to get report format for Payment Advice to Vendor Report Format
And
Asset Accounting Documents with Depreciation configuration

Dear Rupa,
Please send me a test mail: [email protected]
Will send the relevant asset accounting documents with Dep config.
Regards,
Sreeni.
+919986032960.

Duplicate payment

Hi,
I have a following case --
There are two duplicate payment lots created - X and Y .
Then all items in Y lot are reversed.
But in the FBL3N , duplicate entries can be seen. Is there any process missing ?
Thanks.
Nachiket

Check on selection screen your open items per date and ensure you only display those.
Else check the document itself, do you see in the reversed document the clearing information- date and number?
If so it should not be shown under section Open items
Cheers
Hein

Duplicate Payment item

Hi,
when posting electronic bank statement in FEBA duplicate payment item generating for same refernce. Can anyone tell root cause.
Regards
MRS

Check the iput file and also check the posting rules assigned to that external transaction in EBS costomization.
Regards,
SDNer

Duplicate Payment Order

Hi,
After making sucessfull payment run duplicate payment order genearting in backround. Can anyone advise reason.
Regards
MRS.

Hi,
Select the checkbox "Payment Document Check" in the printout program variant used in F110.
Regards,
SDNer

Vendor Payment Advice - idoc PEXR2002

Dear guru,
My customer would like to receive a payment advice from the bank regarding the vendor payments done.
It means that after processing the F110 and sent the payments to the bank, we will receive an acknowledgement idoc from the bank in order to inform us that all payments have been correctly processed.
I have seen that the idoc PEXR2002 can be used as "payment advice" with message type REMADV for instance. But all the cases that i have seen concerned customer payment advices sent directly by them.
Is anyone know if it is possible to use this idoc in order to retrieve the payment information for vendor and not customer?
If yes, where can we retrieve those information in SAP? Besides the table AVIK/AVIP, can we check the payment advice integration somewhere else (reports, financial document)? because in our case we just want to retrieve the confirmation of payments but there wont be clearing between payment/vendor invoice because it will have been already done at F110 processing.
I hope this is clear enough.
Thanks a lot for you help
Guillaume

Hi Afzal,
For sending Payment advice by E-Mail, "You need to copy SAMPLE_PROCESS_00002040 and adjust it to write code as per your requirement. This BTE runs for each payment advice note to be sent and in the module, it is mentioned 1=print, 2 = Fax and I=mail, so you can set your priority, that if an E-Mail address is maintained in the vendor master, send mail or if no E-mail address is maintained send Fax, and if both are not possible shoot a Print.
From Configuration side, you need to maintain the Z copy of SAMPLE_PROCESS_00002040 in FIBF transaction under the Process module of a customer without country or application indicator.
SAP Note 836169 - Consulting: Payment advice notes by email or fax.
Regards,
SAPFICO

Email of Purchase Order and Payment Advice

Good Morning All
We wish to implement the emailing of payment advice documents to our vendors. However, we are not sure if the changes to the vendor master data required for this will also mean that purchase orders for that vendor will also be emailed. Does anyone know if this is the case or not?

Having done some testing I agree that the requirement for condition data for purchase order output makes it possible to email remittances and not purchase orders i.e. by not creating the MN04 condition data. However, in my testing, when I assigned an email address to the vendor for the purposes of emailing purchase orders, the payment advice produced by the next payment run was also emailed. I'm sure I must be missing something as, if nothing else, this would imply that the vendor would offer the same email address for both purposes. In desperation we are wondering whether we need to maintain multiple email addresses and use the standard number for purchase orders and somehow identify one of the other addresses as that to be used for the remittance.

Payment advices in F110 to be sent by email (PDF format) - step by step

Hi SDN,
We have a requirement to automatically send payment advices in F110 via email. The requirement is to send the file in PDF format. I've done a lot of browsing through in the forums, as well as check SAP notes, but none has really detailed a step by step process on how to go about it.
I've also checked SAP NOTE 836169, but it is also not that detailed.
Assuming that SCOT has been already set up by BASIS, I've done the following steps to test if the auto-email works, and here are the steps I did.
1. Vendor Master Data -Define u2018Std communication methodu2019 as SMTP (Internet mail) and maintain an email address in the vendor master data.
3. T-Code BERP u2013 Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
4. Use t-code FIBF to create the enhancement.
a) Create a product.
A product groups together customer enhancements to BTEu2019s developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
Create the product name (for example ZMAIL) and make it active.
FIBF->Settings->Products->u2026of a Customer
b) Assign the BTE to the FM:
Settings->Process Modules->u2026of a customer
Assign the 00002040 process to the FM and Product.
5. Run the autopayment program F110.
After I run the following steps, no email is being generated by the system. Is there anything that I still need to do? Or could anybody please kindly provide a step-by-step process? I'm a functional person, so I won't be able to do ABAP programming for this. Thanks and regards to all

Hello,
Check SCOT and SOST transactions.
At a previous client using 4.6C we did a program and allocated it in F110. The program reviewed the payment tables and sent the payment advice (basic list) to the employee vendors.
Also check http://wiki.sdn.sap.com/wiki/display/sandbox/SendMailwithPDFAttachment
Regards
Waza

Payment Advice Issue- Print and fax at the same time

Hi,
Currently payment advices are being sent to business partners (vendors) thorugh fax/email. This is because process module Z_SAMPLE_PROCESS_00002040 is active in the system.
What I want to do is to be able to also print the payment advices even if vendor has communication data in the master data. Program RFFoEDI1 is used with a custom form. IDOCS are sent correctly to bank and remittance advices are faxed to vendor successfully. With business wanting hard copies of remittance advices, when I try to reprint after first payment run is done and faxes sent running RFFOEDI1 and the payment document number, system says no records selected. I searched in OSS and all the notes related to this issue are already in our system.
I have tried hard to solve this but no luck even I have done this before with other print programs but no RFFOEDI1. One option is to remove the fax/email addresses from vendor which allows me to print but client does not want to remove fax numbers from vendor master.
Any suggestions will be appreciated.
Dam

Look into BTE 2050, through which you could possibly e-mail an additional copy to a generic company e-mail as back up electronic filing of RA. And then you can print it if need to print them on Adhoc basis
Ron

Issue while clearing open items with a payment advice

I have created a payment advice to clear open items on a customer. As part of testing, I have created 2 items in the payment advice. Both are short payments for the open items.
In the first line item, I am short paying an open item by entering the reference number. (XBLNR) in AVIP-XBLNR.
In the second line item, I am short paying an open item by entering the assignment number. ZUONR in AVIP-ZUONR.
I am using F-28 for my clearing. I have noticed a very strange issue where in the program will place the residual amount in the residual amount column against the appropriate line item for the first item. Where as for the second item, it does recognize the open item and brings it in the clearing screen but does not put the residual amount in the residual amount column. Due to this, the new line item in the clearing document does not have a link to its original line item.
This has started happening all of a sudden. I am unsure what might have caused this. Please let me know if you need additional information.
Thanks

Include - MF05BFO0
FORM op_pruefen
Context:
          WHEN 'K'.
           ENHANCEMENT-POINT mf05bfo0_02 SPOTS es_sapmf05b.
Create an enhancement here and add this code
               IF SY-TCODE = 'FB1K'.
                     T041A-AUGLV = 'AUSGZAHL'.
               ENDIF.

Duplicate Payment Advices

Similar Messages

Maybe you are looking for