During consolidation cpu goes 100%

Hi,
During consolidation CPU is going 100%.
can you suggest me some performance tuning tips to improve the performance.
HFM 9.3.1.2 Build.

If you are concerned about the processor utilization AND you cannot simply upgrade your hardware AND consolidation time is not an issue for you, then the following registry changes may be for you :
Key Tree,     Key Name,     Key Type,     Min Value,     Max Value,     Default Value,     Unit of Measure,     Description
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Financial Management\Server\Running Tasks,     MaxNumConcurrentConsolidations,     REG_SZ,     1,     8,          Consolidations,     Controls the nubmer of concurrent consolidations allowed per application server. Any consolidations executed above the value are queued as Scheduled Consolidations.
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Financial Management\Server\Running Tasks,     NumConsolidationThreads,     REG_SZ,     1,     8,          Threads,     Controsl the multi-threading of consolidatiosn per application server. Lowering the value limits the system's utilization of system resources, resulting in slower consolidation performance.
HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\Hyperion Financial Management\Server\Running Tasks,     NumConsolidationsAllowed,     REG_SZ,     1,     20,     8,     Consolidations,     Controls the number of conslidations allower per application across all the application servers.
Edited by: beyerch on Feb 17, 2009 1:22 PM

Similar Messages

T500 turns off after cpu goes 100% for some time

I welcome all useful feedback on the issue - please do test your laptops if you can
my T500 turns off after cpu goes 100% for some time, that is just another issue?
happens both in windows and linux
edit : it cannot be from dust - I remember this happened occasionally even it was brand new

This makes the fourth post to say: CLEAN OUT YOUR FAN.
So...
CLEAN OUT YOUR FAN.
Some compressed air does the trick. You can find the disassembly instructions here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-70068.html
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

CPU going 100%. Can blocked thread may be a reason?

Hi Team,
May be a dumb question. In my application around 40 threads are in blocked state and CPU is going about 100%. Is blocked threads may be reason for that? As threads are blocked, CPU should not be busy entertaining them, that is the reason why this question came in mind. Can somebody clear my this doubt.
Thanks in advance.

I encounter the same problem, although I run Berkeley DB (Ver 6.0.20, C#) under .NET Framework and Windows server 2008(x64). Any BDB application of win32 runs well but will encounter trouble under platform of x64 when compile BDB to x64, even though the DLL compiled and linked with win32. The bug is that Berkeley DB take amount of memory as the size of databases and regardless of cacheSize. My estimation is that all memory for BDB malloced and NOT freed.

System cpu goes 50% to 100% process is oracle.exe

My server cpu goes high 50% to 100% and process is oracle.exe.Database is oracle8i and windows 2000 server.machine is dell power edge 2800.
problem is in oracle database or in machine or in os

It is difficult to guess
but most probably it is your Db which which may be causing
There may be so many reasons for this
It is happenig intermittently?
What is happening at the DB level during 100%?
Any batch process?
any Reporting ?
BAckup?

When starting Firefox 3.6.11 the CPU goes to 100%.

After upgrading from 3.6.10 to 3.6.11 I'm unable to start Firefox in a reasonable period of time (3 minutes). The CPU goes to 100% for one of my 4 cores, when left to its own, the Firefox window appears after 18 minutes 43 seconds. My CPU is a Q6700 (Quad 2.66Ghz).

How can I go back to 3.6.10??

Cpu goes to 100%

I can open itunes. I can not click on anything on the page without my cpu going to 100% and freezing my computer. If I type in an artist in the search I can sometimes look and purchase music. If I go to another artist my cpu goes to 100% and freezes. The only way to unfreeze it is to go to Windows Task Manager and end task on itunes.

http://discussions.apple.com/thread.jspa?threadID=723198&tstart=0

FireFox CPU goes to 100% by backgroundshift

Sorry for my bad english..
Running a simple scrollroutine my cpu use is low :

Hello,
if you have your note for a year or more and did not take it for an internal heatsink clean and essentials parts, yet.
One possible problem here is: Heatsink blocked with dust (CPU goes to 100% state svchost takes all resources)
90% of the high temperatures problems, unexpected shutdowns, 100%CPU all the time without running background processes, very hot keyboard area, freezing programs, are caused by the heatsink blocked with dust.
The normal temperature for the processor is between 55C and 79C. For the motherboard is around 55C~60C. When the heatsink is blocked those temperatures can reach 99C (processor) and around 80C (motherboard). Measure in Celsius degrees.
You can check it out how "hot" your Qosmio is.
Download the Everest ultimate 2006 edition V 3.50.761, look for it with Google search.
Run it and see the temperatures for CPU, Processor and motherboard on your Qosmio:
See:
http://www.rabayjr.com/vista/qosmioeverest.jpg
Run the System stability test (find it under tools menu) for 10 minutes aprox.
Watch the temperatures at taskar. If it reachs more than 92C for the processor on stress mode, its time to clean the heatsink and all essential parts of your Qosmio. Attempt to the processor fan RPM, too, if they run fast and noisy, you really must perform a clean.
But it depends on the ambient environment, for a 30C summer day the processor temperature almost get the 90C. this is normal in stress mode. And the fans run without noise. Slow RPM mode.
All measured in Celsius degrees, for Farenheith please convert it.
Francisco

Importing Audio CD to library, downloads slow and CPU goes to 100%,

Importing Audio books CDs to library, downloads slow and CPU goes to 100%, last two tracks take an extreme long time to load, audio is spotty on those two tracks. Any ideas as to why or how to correct

I think your problem might be in the settings. Your audiobooks might be trying to download like music CDs, and doing error checking and playing while it downloads.
Here's a link to some really helpful information about how iTunes treats audiobook CDs and how to do it better. It helped me out a lot.
http://aldoblog.com/audiobooks/
Good luck.
Andrew Hollinger
www.****************.com (created with iWeb)
<Edited by Moderator: Please See Terms of Use>

CPU goes to 100% state svchost takes all resources on Qosmio F10

CPU goes to 100% state svchost takes all resources. Norton does not find any illegal software. Have tried to list the processes (run... etc.). I get a long list, don't know what to do about it. Does anybody out there have some help?

Hello,
if you have your note for a year or more and did not take it for an internal heatsink clean and essentials parts, yet.
One possible problem here is: Heatsink blocked with dust (CPU goes to 100% state svchost takes all resources)
90% of the high temperatures problems, unexpected shutdowns, 100%CPU all the time without running background processes, very hot keyboard area, freezing programs, are caused by the heatsink blocked with dust.
The normal temperature for the processor is between 55C and 79C. For the motherboard is around 55C~60C. When the heatsink is blocked those temperatures can reach 99C (processor) and around 80C (motherboard). Measure in Celsius degrees.
You can check it out how "hot" your Qosmio is.
Download the Everest ultimate 2006 edition V 3.50.761, look for it with Google search.
Run it and see the temperatures for CPU, Processor and motherboard on your Qosmio:
See:
http://www.rabayjr.com/vista/qosmioeverest.jpg
Run the System stability test (find it under tools menu) for 10 minutes aprox.
Watch the temperatures at taskar. If it reachs more than 92C for the processor on stress mode, its time to clean the heatsink and all essential parts of your Qosmio. Attempt to the processor fan RPM, too, if they run fast and noisy, you really must perform a clean.
But it depends on the ambient environment, for a 30C summer day the processor temperature almost get the 90C. this is normal in stress mode. And the fans run without noise. Slow RPM mode.
All measured in Celsius degrees, for Farenheith please convert it.
Francisco

XP mode on Win7 Pro x64, windows xp update/svchost pushes CPU to 100% in virtual machine.

Installed xp mode on a win7 pro, dell 490 with xeon cpu. The install goes without error, win xp virtual machine loads nicely, I do not enable updates at the config during 1st startup. When Automatic update is enabled later control panel shows svchost is
pushing the cpu to 100% and the update never completes.

Hi,
1. try to run XP in safe mode by F8
2. then change Automatic update service to Manual or Disable.
3.boot XP into normal mode and see weather its still 100%.
thanks
How do you start safe mode when running XP Mode in Win 7? When you start XP Mode, the BIOS is hidden. By the time the XP Mode window comes up, its already loading the Windows desktop.

CPU goes idle and then comes back..why?

During stress testing we ran 100 concurrent logons and then logoffs with the first 84 user completing this test run in 20 - 30 seconds. During this time both Portal ap1 and ap2 hit 100% utilization on the servers. After the 20 - 30 seconds the portal aps CPU goes idle and the
remaining 16 users out of the 100 hit a 120 second delay before there request returns processing the test and completes. During this 120 sec delay I see the aps CPU go idles until the 120 sec time expires.
What is causing this 120 sec delay?

Hello Vaibhav,
sorry I have no answer to your question. I want to know what tool you are using to do the stress test. We go live in one week with our EP for CRM and I really want to know if the performance is enough for 120 Users.
Regards
Gregor

Adobe Acrobat Pro 9.1.0 CPU at 100%

I just install Acrobat 9.0 on a Dual Core 3.16gig with 4gig of ram. I'm on Windows XP SP2.
I open Adobe and the CPU usage is at 50% all the time Adobe is open so i upgrade to 9.1.0 and try and i have the same problem.
I don't do anything on the application.. Only open Acrobat.exe ..
If i try the same installation on my computer with 2gig of ram or less, the CPU goes to 100%..
Can i do anything to solve that CPU usage ?

Adobe Tech support was most helpful on this. First download the updated
Distiller ICC profile files at:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4075&fileID= 3790
Unzip the file and copy only the *.icc files (without regard to the subfolders that they are in - in other words, take the files out of each of the subfolders) to the followng folder in Windows 7:
c:\windows\system32\spool\drivers\color
These new files will probably overwrite some old ones.
This solved the problem for me.
This is actually the best solution though I found that instead of copying all the .icc files to the windows\sys... folder, all you need to do is copy the 3 Video files from the RGB folder (VideoHD.icc, VideoNTSC.icc, and VideoPAL.icc). Once you add these three files to c:\windows\system32\spool\drivers\color you will be good to go.
It seems that this was an error on the part of Adobe in that there is no reason to include Video files for printing. Nevertheless, the distiller will look for these and return the ICC profile error message if those files are not present.

CPU consumption 100%: How do I see which SQL is consuming?

Hi,
I need help badly with this because I cannot get my head around the problem. I have a Windows server 2003 Enterprise 64-bit running Oracle 10.2.0.3 and last night it started consuming 100% CPU. The Windows performance monitor shows 100% CPU in any case, and it was difficult to even login via remote desktop.
It is Oracle.exe that is consuming, and there is only one database on this server. It is an Opteron 875 2.2Ghz with 8GB ram.
I want to see which SQL statement is responsible for the CPU consumption. I know exactly which user/programapplication is using it... it is useless to kick the session because the application connects immediately again from the app. server and runs the same thing. Restarting the database also has the same effect: session reconnects and CPU goes through the roof. Customer says that they are running the same stuff as always, and app. has not been updated recently. 100 % CPU to them, means something is wrong.
Incidently, I tried to CPU patch this database a couple of days beforehand, but there was not enough space on disk (needed 1.6GB) so opatch complained and would not continue. I simply restarted the database without having run opatch. I cannot imagine that this is the cause of this problem.
Anyhoo...
I have a script from Kyle Haileys web site to get the CPU for each sql_id using ash tables:
-- (c) Kyle Hailey 2007
col type for a10
select * from (
select
ash.SQL_ID , ash.SQL_PLAN_HASH_VALUE Plan_hash, aud.name type,
sum(decode(ash.session_state,'ON CPU',1,0)) "CPU",
sum(decode(ash.session_state,'WAITING',1,0)) -
sum(decode(ash.session_state,'WAITING', decode(wait_class, 'User I/O',1,0),0)) "WAIT" ,
sum(decode(ash.session_state,'WAITING', decode(wait_class, 'User I/O',1,0),0)) "IO" ,
sum(decode(ash.session_state,'ON CPU',1,1)) "TOTAL"
from v$active_session_history ash,
audit_actions aud
where SQL_ID is not NULL
and ash.sql_opcode=aud.action
and ash.sample_time > sysdate - &minutes /( 60*24)
group by sql_id, SQL_PLAN_HASH_VALUE , aud.name
order by sum(decode(session_state,'ON CPU',1,1)) desc
) where rownum < 10
This give following output:
SQL_ID PLAN_HASH TYPE CPU WAIT IO TOTAL
cxk376gut06wn 3831248992 SELECT 12 145 5855 6012
4ffvdt72n46yt 4094592372 SELECT 0 3 1131 1134
dnxgm7bg8wqg1 4025412530 SELECT 3 13 337 353
3y0dyvkc9sx69 1764840833 SELECT 18 169 56 243
abz05715h08ct 1967470119 SELECT 0 7 175 182
4gd6b1r53yt88 0 UNKNOWN 0 92 4 96
9phhuzxpqwsgc 2662599208 SELECT 0 67 0 67
275bbj5czbrwp 629013258 SELECT 0 2 64 66
1dvrrg3aah2mu 75914095 SELECT 0 6 57 63
My assumption is that this gives the average CPU usage over the last x minutes and the total cpu usage for this sql_id. There are no sql running that show a very high average CPU, but the total is up in 6000 for the longest running sql, so I get the statement for the top sql_id that has highest total, and it is this:
SQL_ID cxk376gut06wn, child number 2
SELECT NVL(MIN(ID),0) FROM TABLE_OBFUSCATED WHERE TASK = :B1 AND
STATUS='JobQueue' AND MESSAGE_ID IS NULL
Plan hash value: 3831248992
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | 3231 (100)| |
| 1 | SORT AGGREGATE | | 1 | 42 | | |
|* 2 | TABLE ACCESS FULL| TABLE_OBFUSCATED | 3 | 126 | 3231 (1)| 00:00:39 |
Predicate Information (identified by operation id):
2 - filter(("TASK"=:B1 AND "STATUS"='JobQueue' AND "MESSAGE_ID" IS NULL))
It doesn't seem to fit! It's such a simple statement, but according to ash this is the sql using the most total cpu over the last 30 minutes?? So I create a temp index on the filter and check the plan for the statement again, and it uses the index, but I need to kill the session or bounce the database for the new plan to be used because the currently running session is still using the old plan. Customer was desperate to get it down so I even tried flushing the shared pool but new plan does not get used. I did not want to restart the database. Do I have to kill all sessions using that plan for the new one to take effect?
Now im stuck. I don't really know how else to get an accurate picture of which sql is currently consuming CPU. I need to know this to try to fix the SQL because stopping the application is not an option, even if it is throwing too much at the database. The only other option I can think of is setting up profile limits for cpu consumption in oracle, but then the job will likely take an unacceptable amount of time for the customer.
So my questions are:
1. How else can I check which SQL is using CPU accurately?
2. Does the SQL I show above accuratlely display current average CPU over x minutes with ASH? Why is it so low for the top consumer but my CPU is still at 100% on the OS?
Thankyou for your help.

Yeah, OK, I can see an arbitary number for CPU used since session startup (what does that refer to by the way? It can't be percent), and I can see that one user has consumed massive amounts of CPU compared to all other sessions, but he is currently not running anything, so how can I see which SQL he ran in the past day that cuased all that CPU consumption? Can I do this without AWR?
By the way, do you need a Diagnostic Pack license for simply viewing the Performance tab of dbconsole? I Can go into dbconsole and see history for 2 days back and see the massive espike that caused CPU consumption, but when dbconsole displays the list of top SQL and top sessions under the graph, is it the top listed SQL that consumed the most cpu or do you need to correlate the colours, i.e. find the SQL listed in top SQL that has the same colour as CPU usage on the graph (green) even if it is not listed as the top "consumer" (which I assume means top AAS consumer: overall consumption of all resources)?

CF9 CPU at 100%. Moved to new CF11 server and copied files over and it's still at 100% CPU almost immediately on new server

Our web server is stuck at 100% CPU. Three days ago we were on CF9 and started running into this problem until the server crashed and wasn't salvageable. Luckily we had a fresh Windows 2008 Server R2 ready to go with a fresh copy of CF11 on it. I copied all the website files over and we were back up and running. A day later the CPU is back to 100% on the new CF11 Windows 2008R2 server. I also updated CF11 to the latest update 3 that was just released.
If I turn off the CF service the CPU usage goes back to normal. If I turn CF back on, the CPU goes back to 100% within like 5 seconds. So it doesn't seem like some slow running page or anything that eventually eats up all the memory or whatever. I'm not an expert at looking at the logs, but I don't see anything too out of the ordinary. The one thing that looks strange to me is I see this line over and over.
Dec 12, 2014 11:28:41 AM Information [ajp-bio-8014-exec-59] - Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=194', method='get'}
That line makes me think we got hacked somehow, but it's hard to know.
I did up my JVM heap size and max size to 1024MB. We have 4GB of memory. And i changed teh JVM arguments to what's below based on a forum post. Nothing seems to help.
-server -XX:PermSize=192m -XX:MaxPermSize=192m -XX:+UseParallelGC -Xbatch -Dcoldfusion.home={application.home} -Dorg.eclipse.jetty.util.log.class=org.eclipse.jetty.util.log.JavaUtilLog -Duser.language=en -Dcoldfusion.rootDir={application.home} -Dcoldfusion.libPath={application.home}/lib -Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true -Dcoldfusion.jsafe.defaultalgo=FIPS186Random
Any additional ideas on how to debug this or what to look at? Thanks!

Thanks Charlie for your insight. I searched everywhere to find a cfhttp request that was causing the issue, but couldn't find it. I did find some unusual files that were loaded though that I know we didn't put there. I did a search and found this link that shows the code. Coldfusion CFIDE bitcoin mining exploit – PHP involved… | code-complete.com and that you mention in your article too. I don't see any of the executables running or files that were mentioned though. I found that code in 8 different spots though and removed them. Maybe our old server had the executables and hacked files on them. Hard to know as it won't boot up anymore!
I think I did possibly isolate the HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=218', method='get'} in the http.log file to a certain site in IIS though. And it wasn't our main site. I turn off this website in IIS and it appears the weird request goes away. I turn the site back on and it starts to re-appear. It doesn't always load constantly so it's a little hard to tell. This site is pretty small. I went through each file on the site and did find one file that did appear to be hacked. It wasn't coldfusion code though. Just some html links. I removed it. That's all I could find. No cfhttp calls or anything else.
We re-installed Coldfusion 11 on Friday as well and upgraded to Update 3. It doesn't stay locked at 100% as much right now, but it being over the weekend we don't get much traffic. Monday will be the real test. I think I will leave that smaller site turned off for now and see how things perform. I'm doing a full virus scan for the heck of it overnight too. Don't really expect it to find anything though. I also turned on advanced logging in IIS 7.5 and don't see anything out of the ordinary. I made sure client variables weren't in the registry either.
Here's a part of the http.log file when I turn the IIS site on. I turn the site off and it stops popping up in the logs.
"Information","ajp-bio-8014-exec-57","12/13/14","22:33:14",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=233', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:36:17",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=601', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:38:31",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=459', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:38:54",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=108', method='get'}"
"Information","ajp-bio-8014-exec-57","12/13/14","22:39:55",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=218', method='get'}"
"Information","ajp-bio-8014-exec-63","12/13/14","22:52:03",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=54', method='get'}"
"Information","ajp-bio-8014-exec-64","12/13/14","22:57:32",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=40', method='get'}"
"Information","ajp-bio-8014-exec-64","12/13/14","22:58:37",,"Starting HTTP request {URL='http://zzen1wbudopwg.nchyt.com/encfm/en0024-ssj5iway6wvg/cbeim94a1s2kebu.php?do=702', method='get'}"

Xine fullscreen CPU at 100%

Hi,
When i watch a movie or myepisodes my xine races my cpu to 100%.
I have tried other video drivers in xine but nontheless.
Some info you guys might need:
- WM: Openbox
- Dual Monitor Setup whit following screens:
a. Samsung Syncmaster 940nw
b. Neovo F-419
lspci -v
02:00.0 VGA Compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 410 260 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
Option "PreferredMode" "1440x900"
Option "Primary" "True"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "AGNeovo"
ModelName "F-419"
HorizSync 24-80
VertRefresh 49-75
Option "DMPS"
Option "LeftOf" "Monitor0"
Option "PreferredMode" "1280x1024"
Option "Primary" "False"
EndSection
Section "Device"
Identifier "RV100"
Driver "radeon"
BusID "PCI:2:0:0"
Option "Monitor-VGA-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "syncm"
SubSection "Display"
Modes "1280x1024" "1440x900"
Depth 24
Virtual 2720 1024
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
xrandr
Screen 0: minimum 320 x 200, current 2720 x 1024, maximum 4096 x 4096
VGA-0 connected 1440x900+1280+0 (normal left inverted right x axis y axis) 410mm x 257mm
1440x900 59.9*+ 75.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 375mm x 301mm
1280x1024 60.0*+ 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
I hope this is enough to go on.

Not sure if it supports it i've seen ubuntu forums use them and they worked. Not sure if this counts.
Just made this linux box 2 weeks ago it has happend since the start.
Wel cat /proc/cpuinfo gives me:
redostrike ~ $ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.00GHz
stepping : 4
cpu MHz : 1992.410
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts
bogomips : 3986.85
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 32 bits virtual
power management:
Not the best one out there but still it should run good.
vlc, mplayer are even worse the have lots of lags. Havent tried gstreamer yet will look into that.
I've been tweaking my xorg.conf a bit and now i can get a larger screen out of it but the cpu still goes to 100%.
This is the Device section now.
Section "Device"
Identifier "ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]"
Driver "radeon"
Option "ColorTiling" "On"
Option "EnablePageFlip" "On"
Option "DisplayPriority" "BIOS"
Option "RenderAccel" "On"
Option "AccelMethod" "XAA"
Option "XAANoOffScreenPixMaps"
Option "AGPMode" "8"
BusID "PCI:2:0:0"
Option "Monitor-VGA-0" "Monitor0"
Option "Monitor-DVI-0" "Monitor1"
EndSection

During consolidation cpu goes 100%

Similar Messages

Maybe you are looking for