DVD recording very slow on my Satellite M30

Hi,
I have a satellite M30 with a DVD burner Teac dv-w28e. burning onto DVD (8x) takes more than 1 hour and half for 4 GB, even if the burning program says the speed is 8x and the estimated time is 10 minutes.
So, what's the matter???

Hi
Which burning program did you use?
I prefer to use the Nero burning utility. In my opinion, its one of the best burning tools. You should check if you have this issue with other burning programs.
Did you simulate the burning procedure or did you burn the DVD without simulating?
As far as I know some programs simulate firstly the burning procedure and after proper simulation the files will be burn to the DVD. In this case the burning procedure takes much longer.
Bye

Similar Messages

SM58 Transaction Recorded Very Slow

Dear Experts,
I have many tRFC in PI system in SM58 with status transaction recorded. This seems to be because there were an unusual data (file to idoc) from 1 interface that suddenly sends more data than usual. This happens at midnight, since then we have a queue at in SM58 with many transaction recorded (until tonight).
Strange things is actually that when I try to execute the LUW (F6), the transaction could be processed successfully, even though sometimes after pressing F6, the processing time could take some time (marked by the loading cursor). When the processing time is long, I just stop the transaction, re-open SM58, then the transaction that was executed before will be in the "executing" status and then I execute LUW for the transaction again and it never takes a long time to execute it.
Trying to execute LUWs and ticking the recorded status would end up no transactions executed.
Checking in SMQS for the destination, it is rarely that the actual connection reach the maximum connection. Seeing QRFC resource in SMQS, the Resource Status shows OK.
Going to SM51 then Server Name > Information > Queue Information, there are no waiting requests.
Actually the transactions are do processed, it just they are processed very slow and this impact to the business.
What can I do when this happens? How to really re-process those recorded transactions?
Could this be because the receiver resources? How to check for this?

Dear Experts,
According to this link,
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=145719978
"Transaction recorded" usually happens when A. processing idocs or B. BW loads.
A.If it occurs when processing idocs you will see function module "IDOC_INBOUND_ASYNCH" mentioned in SM58.
Check also that the idocs are being processed in the background and not in the foreground.
Ensure that background processing is used for ALE communications.
Report RSEOUT00 (outbound)can be configured to run very specifically for the high volume message types on their system. Schedule regular runs of report RESOUT00 it can be run for
IDoc Type and\or Partner etc..
To set to background processing for Outbound idocs do the following:
-> go to transaction WE20 -> Select Partner Select Outbound Message Type and change the processing method from
"Transfer IDoc Immedi." to "Collect IDocs".
Reading that explanations, should the setting of IDoc processing to background (Collect IDocs) is done in PI or the receiver?
If the IDocs is processed collectively, will it make the sending IDoc process faster from PI to the receiver system? What is the explanation that if the IDoc is processed collectively, it would make the IDoc sending to be faster?
Why should we use RSOUT00 report when we already have SM58, and we can execute LUWs in SM58?
Thank you,
Suwandi C.

Lightroom 3.6 exporting to CD/DVD is very slow

I'm using Lightroom 3.6 for Mac and when I export to CD/DVD it takes several minutes to burn the CD. For example, I have about 50 jpg images that I export at 100% quality and at 300 dpi with no watermarks, etc. I can use Finder to burn to disc funtion and I can burn 2 cd's in the time it takes Lightroom to burn. I want to be able to use Lightroom for all my processing from importing to corrections to printing to exporting on CD. When shooting events we take the images in jpg, import and put them into folders for each client. Once the client purchases a CD of all their images we burn the CD. I do not want to use separate software to burn the CD if at possible. Is there settings or something I can change in Lightroom to speed up the process?
Thanks!!

Thanks Lan. I take the photos in jpg format (not RAW) in the camera, use Lightroom import and assign a sub-folder. Once the customer reviews the photos (in Lightroom), they have the option to purchase a CD or print. If they want to purchase a CD, I use the export feature and choose CD/DVD instead of Hard Drive and Lightroom request to input a CD and I click on Burn. Lightroom then prompts for me to enter text for a name and then it starts the burn process.
I hate it takes so long because Lightroom is a good all-in-one prograrm that does all I need. The burn to CD/DVD is very nice becuase if I have more images than a single CD will hold, it will prompt for the 2nd, 3rd, etc CD until it finishes. Other CD burning software will only tell you that it cannot burn to CD because the data is more than the CD will hold. When in the field an event you cannot hold up sales because it is to slow to burn. Will have to look at other alternatives besides Lightroom for this.
Thanks again.

Can i use DVD recorder SD-R6572M with my Satellite A80-117?

Hi,
Can anyone let me know if i can replace the existing DVD drive on my Satellite A80-117 with a SD-R6572M.
Basically I"m looking for any information ragarding the compatibilty, before i buy the drive.
Any pointers are appreciated.
Regards,

Hi
I found a information that these drives are compatible with your unit:
Read-only Drives
ext. Slim Line 24x CD-ROM Drive PX1052E-1NMD
External DVD-ROM Drive PA3401U-1DVD
Writeable Drives
External CD-RW/DVD Rom Drive PA3438U-1CD2
External DVD Super Multi Drive PA3402E-1DV2
External DVD Super Multi Drive PA3454U-1DV2
Unfortunately, I dont know if the SD-R6572M is compatible with the Satellite A80-11
Bye

Dragging files to a DVD is very slow

Since a couple of months dragging files to a DVD player takes minutes.
I'm not talking about the burning process but just about dragging files from my harddrive to my dvd folder. This used to be a matter of seconds but since a while (I believe since the mavericks update) once I drop a couple of hundred files on my dvd I get a spinning wheel and it takes minutes until it stops and the files are in the folder.
I'm running OS 10.9.1 on a 2009 2.66 quad core Mac Pro with 16 GB 1066 MHz DDR3 and got a HL-DT-ST DVD-RW GH41N
Any Idea what can be causing this problem?

More than 50 files spread out at one level makes the Finder slow. Put those same files inside a folder, and drag and drop the folder, and things usually speed right up.

QuickTime Screen Recorder Very Slow in Mountain Lion

Is anyone else having problems with the QuickTime screen recorder in Mountain Lion vs in Snow Leopard? I remember it being light in Snow Leopard, but now, it hogs CPU and GPU (I think) cycles. Most of the time, what I'm trying to record (even just Safari or Finder windows) slows down because of it. Is there a fix for this? My computer is perfectly capable of running Mountain Lion and is much more powerful than my older Mac, which could use the screen recorder just fine in Snow Leopard.
I've also noticed that, if you choose to record audio from a mic, it doesn't start recording video until you make a detectable sound. I can tell by the bitrate meter it shows. This is stupid in my opinion... It should just start when I tell it to.

File a bug report with Apple. Aside from that, I can't help.

Satellite 1800 plays DVDs very slow

My Satellite S1800 is very slow, when trying to watch dvd movies, picture and voice stucks and when watching videos from youtube, its same thing.
I just formatted my hard drive and re-installed winxp and thought that would help , but no , its still same thing.
What is the problem? My toshibas specs: 1Ghz , 256 ram , 8mb trident cyberblade ai1, 20gb, i think those should roll some dvd movie?

First, I wanted to answer with a detailed reasons of this, but this forum did NOT allowed me to post my "polite and helpful" message due to spelling mistakes even there wasn't any. Then it allowed me to post without spelling checking. (did not understand, weird)
The answer of your problem is because of excessive cpu usage which i had on my similar S1800-100 while watching any MPEG-2 video or youtube video.
I don't know why the DVD drive was insertings into this notebook, maybe for data transfer or other viewing, the fact that your CPU is not strong enough to render DVD movies, it should be the reason.
Please check your CPU usage while watching videos.

Satellite M30: Replace DVD with additional HDD?

Hello!
As my Satellite M30-642 doesn't offer a modular bay to switch drives and as I got an additional DVD writer for USB which I can use I am thinking of trying an experiment: removal of DVD drive and replacing it with an additional HDD/SSD.
As the SSDs are very light weight, have no moving parts and do not necessarily require screws to be installed and as the DVD slot delivers IDE and power connector this could work. The SSD needs to be placed inside an old and modified slimline cd-rom to ensure that the modification isn't visible and the notebook is safe from dust etc.
Has anyone tried something like that before? Are there any solutions to buy for Sat M30 (model year 2004)?
Cheers, obreitfelder

Hi
As far as I know the Sat M30 doesnt support the slim select bay and therefore you cannot use such adaptor instead of the CD/DVD drive.
Sorry this is not possible
Bye

Satellite M30-861: why can i not write to DVD?

Hi I bought Satellite M30-861 about 15 months ago and until now have only tried to burn CDs - no problem. Now I want to try to burn onto a DVD but it doesnt seem to be recognised (I tried drag n drop and also NERO). I can see on the drive unit that it says DVD R/RW and according to my warranty info on Toshiba website I should be able to burn DVDs (this was a question I asked when buying!). Any ideas what I am doing wrong??!
Thanks!
Marving

Hi Marvin,
According to the specifications for your notebook you should be able to burn DVD-R/RW only. Are you sure that you are using the correct media ( -R/RW and not +r/rw).
Also if you are using RW media then these will need to be formatted before you can burn to them. (you can use Nero INCD to do this).
regards,

Satellite L300-1BW - Is very slow

Hi, everyone!
Recently, I bought TOSHIBA SATELLITE L300-1BW (PSLB8E)
Link: http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK&userAction=SMP_RESU LTS_PAGE&partNumber=PSLB8E-03F007EN&serialNumber=Y8805872q&USER_ACTION=Serial %20number
I need this for my study and home using. Computer working VERY slowly. Now I have a Windows XP Pro SP3 64-bit version. Programs what I have only Ms Office, Skype, Nero, antivirus - BitDefender. I do not play any games. Application Im using for my study only - Ms Word.
My computer was checked in service center and no any faults were wound - no any sofware and hardware damages, viruses, no any manufacture faults. Owners of these model please give me advice what to do. I stucked!
Do I need to install Windows XP 32bit or install Windows 2000 or any hardware upgrade (memory ... whatever)? I don`t want be disappointed by TOSHIBA!
Ill appreciate any HELP!

Hi buddy,
Can you be a little bit more detailed, please? What do you understand with very slow?
How long it takes to startup Windows?
How long it takes to start an application?
I have to say that Windows XP 64bit wasnt popular and there is no official support from Toshiba for this OS. If you want to use Windows XP, I can recommend installing the 32bit version.
Have you tested your notebook with factory settings? Does it work properly with preinstalled OS from Toshiba?
Im also Satellite L300 owner and I use the preinstalled Windows XP 32bit from Toshiba. Im very satisfied with this notebook, its pretty fast and need few energy. :)

Help.....Help......Help....My database is not posting records has got very slow.

What to do know.
My database has got very slow.
Repeatedly I am getting 12571 error in UDUMP
FATAL ERROR IN TWO-TASK SERVER: error = 12571
*** 2002.06.29.15.44.23.992
ksedmp: internal or fatal error
No current SQL statement being executed.
----- Call Stack Trace -----
No operator is able to post any records.
What to do, Please Help.
Sumeet

What to do know.
My database has got very slow.
Repeatedly I am getting 12571 error in UDUMP
FATAL ERROR IN TWO-TASK SERVER: error = 12571
*** 2002.06.29.15.44.23.992
ksedmp: internal or fatal error
No current SQL statement being executed.---->please notice this line why no any SQL statement is executing
----- Call Stack Trace -----
No operator is able to post any records.
What to do, Please Help.
Sumeet

Retrieving record from oracle DB very slow..pls help

Hi, i'm writing a VB code to retrieving records from Oracle DB Server version 8. I'm using VB Adodb to retrieve the records from various tables. Unfortunately one of the table are very slow to response, the table only contain around 204900 records. The SQL Statement to retrieve the records is a simple SQL Statement that contain WHERE clause only. Any issue that will make the retrieving time become slow? Is that a Indexing? Oracle Driver? Hardware Spec? Or any solution for me to improve the performance. Thanks!

Well, there are a few things to consider...
First, can you try executing your query via SQL*Plus? If there are database tuning problems, your query will be slow no matter where you run it.
Second, are you retrieving significantly more rows in this query than in your other queries? It can take a significant amount of time to retrieve records to the client, even if it's quick to select them.
Justin

Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

Hi All, I have a master detail form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
for rec in (select wrrh_col
                  wpbh_col_lvd,
                   wpbh_col_doc_no
      from wh_col,
           wkpl_col,
           wh_col
     where wrrh_col_no = :block.wreh_wrrh_col_no
       and wrrh_col_no = wreh_wrrh_col_no
         and wrrh_col_no = wpbh_col_no
       and wrrh_col_proj    = wpbh_col_proj
       and wrrh_proj_no     = wpbh_proj_no) loop
   if fun_name(rec.wpbh_col_lvd) = 'Y' then
    do something,
   end if;
end loop;
The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
Please advise.
Thanks.

Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

G5 Dual - DVD Reader has gone very very slow after Leopard

After 1 Migrate install and 1 clean install, I notice that reinstalling apps is taking 4/5 times as long as they should it's as if my DVD Reader has gone very very slow. I thought at first it was the migration that had caused FCPS2 to reinstall slow.
(Sony DVD RW AW-G170A 4 months old) on G5 Dual 2's)
FCPS2 wanted 19-hrs to install, I waited 6 hrs and then gave up. Luckily or unluckily as the case may be I used the time install Leo on my other Macs.
In the end I have installed Apps over the Firewire network connected to my other G5 Dual with the stock DVD drive, they are installing fast now.

Some more info about my setup:
*Simultaneous Dual band AEBS:*
Radio Mode: 802.11n only (5 GHz) - 802.11b/g
Radio Channel Selection: Manual - 161 (5GHz), 6(2.4GHz)
*Airport Express:*
Wireless mode: Extend a wireless network
Allow wireless clients checked under the name of the network (same as for AEBS).
Both are WPA/WPA2 Personal security. And both the routers were upgraded to 7.4.2 firmware this morning with the hope that it will help.
*N Devices (both working fine):*
Apple TV 40GB
2009 Model Mac Mini upgraded to Snow Leopard - working perfectly.
*G Devices:*
Thinkpad running WinXP
Dell Laptop running WinXP
Acer Netbook running WinXP
iPod Touch
iPhone 3G
Linksys webcam
_All of the above are working fine_.
+2008 model Mac mini -+ upgrade to Snow Leopard shows extremely slow wifi connection that it is unusable. It takes 20min to load apple homepage. When I boot from the clone of my Leopard lying on my external drive, it works perfectly.
I compared the settings between all the tabs of Network-->Airport-->Advanced and they are identical between Snow Leopard and Leopard mode except that SL doesn't have the "Apple Talk" tab.
Appreciate any help to debug this.

Very slow working Satellite L30-10V

I've had my toshiba just under two years now and for pretty much as long as I remember its been very slow. Last week it died completly and kept telling me there was a harddisk error preventing windows from opening. I did the product recovery on toshibas advice and got my computer working again but its still as slow as ever, if not more! Theres nothing on here to even make it slow.
I've changed the power setting to a more efficient one, done a disk clean up and defragmented it but nothings changed. I have over 45GB free out of 59GB so I'm not sure that updating the memory would help?
I need advice please, HELP!

Satellite L30-10V
its been very slow. Last week it died completly and kept telling me there was a harddisk error preventing windows from opening. I did the product recovery on toshibas advice and got my computer working again but its still as slow as ever, if not more!
Sure sounds like the symptoms when a hard drive is dying.
The slowdown occurs because reads and writes to the drive must often be made multiple times before they are successful.
What does chkdsk have to say?
Check your hard disk for errors
-Jerry

DVD recording very slow on my Satellite M30

Similar Messages

Maybe you are looking for