Dynamic sotring unpossible when have more then one group!

Hi Folks!
I have problem that is bothering me for two days. I would like to have dynamic sotring on my report but it is not possible when i have two groups. It is working only if i have one. If i have two it sorts by the first column in the group. I try to set property break order to none but then i get an error REP-1259: Group 'GroupName' has no break columns. Please advice me what are my options.

Hi,
the order-by statement, whcih can be dynamic via lexical parameters is only relevant for the lowest group. For the other groups the Property is relevant and it must be set for at minimum one column in every group. That's what you have seen.
What you can do is, to create a formula column in an upper group, use the sort-order for this column and set the formula column with that information you want to use for sorting.
Regards
Rainer

Similar Messages

  • Can I have more then one icloud E-Mail Account?

    Can I have more then one icloud E-Mail Account?

    Hi Pathfinder93950,
    Welcome to the Support Communities!
    You can only have one iCloud account per Apple ID.  However, you can have up to 3 aliases that point to that iCloud account.  Here is some additional information:
    iCloud: Set up an @icloud.com email address
    http://support.apple.com/kb/ph2620
    After you set up your @icloud.com email address, you can use it to sign in to iCloud. You can also sign in using the Apple ID you used to create your iCloud account.
    iCloud: About email aliases
    http://support.apple.com/kb/ht4897
    iCloud: Create or change email aliases
    http://support.apple.com/kb/ph2622
    You can have up to three active email aliases, and you can delete or deactivate (turn off) an email alias at any time. You might want to deactivate an alias if, for example, you use an alias to make a purchase. After you receive the item, you can turn off the alias to avoid follow-up advertisements, then turn it on again when you make another purchase.
    Deleting an alias is permanent, so if you think you might want to use the alias again, you should simply turn it off. When an alias is turned off, all email sent to that alias is returned to the sender.
    iCloud: Using your @icloud.com email address
    http://support.apple.com/kb/ht5441
    Cheers,
    - Judy

  • Object would have more then one attribute with the tag :VALUE

    I'm creating a new component in Ultiboard - a 100 pin connector.  This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
    When I change the VALUE or NUMBER attribute, I get the DRC error  message:
    This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
    Please remove one of the attributes and try again.
    Okay, so I've tried deleting the tag and now I can't name the pin at all. 
    What am I missing?

    You should be in the footprint editor to edit the pin name.  Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon.  In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.   
    Tien P.
    National Instruments

  • Can you have more then one iphone control the apple tv at the same time?

    Can you have more then one iphone4 as a remote for one apple tv at the same time?

    iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

  • Can I have more then one MVIEW site connected to single master site?

    Hi,
    I need one help from your end.
    Currently I am working on Basic Replication.For that I am using Read only Materialized views.first i tried with one master site & one Materialized view site its working fine,Can I have more then one MVIEW site connected to single master site referring to same database ? if so how to achive this one..

    Actually one of my senior told me that you need to change number of OPEN_LINKS value like that so for that reason I asked this question.
    Still that problem not solved..
    I will explain what are all the things I did ok.
    IN MASTER SITE:
    I am creating read only MVIEW's.
    first i created one user repadmin and have given
    1>execute any procedure
    2>dbms_repcat_admin.grant_admin_any_repgroup
    3>dbms_repcat_admin.grant_admin_any_schema
    4>select any dictionary
    and all other grants to repadmin user
    then I changed global_name = 'zxincmp' on Master site.
    Then I created mview log for each table (for 85 tables) & then I created mview's for that table on Master site itself. later I took a dump of these 85 mview's . then I transfered this dump to one of my mview site.
    IN MVIEW site:
    I created one user zxdbp_55 and all the above rights are given to this user & i created one public dblink
    "zxincmp" using "TO_CMP"(master site).Then I imported that dump which i took from master site.
    then i created one private link zxincmp in one of my mview site.then i used DBMS_REFRESH.MAKE('')
    to refresh all my tables & to set the interval..
    after that i created index on the mviews..
    this will works out fine for single master & single mvirew site.but I tried with the same procedure to prepare one more mview site,everything is fine but main problem is second mview site is not getting refreshed automatically,i need to do refresh manually from enterprise manager.. then it will get refreshed.
    how to overcome this problem? I am using same db name ,dblink,refresh group for both the mview site will it affects anywhere?
    Thanks & Regards,
    Hanumanth.

  • HT1107 I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

    I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

    MobileMe ends here at the end of the month so you will need to look into hosting your website/websites with another webhosting service.
    I personally use IX Webhosting for a couple of reasons:
    Fast reliable personal tech support by phone, instant chat, & email
    They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
    And, price they are very reasonable plans start @ $3.95 USD a month
    http://jeffnitschke.com/IXWebHosting.html

  • Can you have more then one Itunes account on your computer?

    Can you have more then one Itunes account on your computer?

    Yes. (One of my systems has music purchased from two different iTunes accounts in its iTunes library.)

  • HT204150 can you have more then one itunes account on an icloud?

    can you have more then one itunes account on an icloud?

    I Have two iTunes accounts because I spend half the year in Canada and other half in U.S.
    I Just  switch the country. I have to do this because an iTunes card purchased in the U.S. Is not valid in the Canada store. And Vice Versa.
    i Also have two icloud accounts. That is what I don't know about.
    Do I need two? Can I have all my purchases in each country under one account?

  • I have more then one apple ID's on my phone how do I remove one but keep the other?

    I need help, I have more then one apple ID on my iPhone 4, is there any way to delete one but keep the other?

    You can only be signed in to one Apple ID at a time.  Sign in to the one you want and ignore the other.

  • Acrobat stop when open more then one document

    Hello
    when I try to open more then one PDF Acrobat hang.
    I must kill the process and then I can open one PDF again.
    It does not work independently I try to open the second PDF by double-click or with the menu inside Acrobat.
    I use Adobe Acrobat XI (11.0.0) on a Windows 7 64-Bit system.
    I try to deinstall Acrobat completly and reinstall it but without success.
    I could not really say until which time it works but I know that it is working in the near past.
    Can somenody tell me why it doesn´t work?
    What happen? What could be the reason?

    Please update the Acrobat 11 to 11.0.6 via Help -> 'Check for Updates' option  and then see if issue still exist.
    Regards,
    Anoop

  • B85-G43 A2 boot error when connecting more then one SATA driver

    Hello everyone please help me.
    As the title says, whenever i connect more than one sata driver (hdd or dvd) i get te A2 boot freeze....
    Already changed cables, hard drives, and problem persist!
    Sorry for my bad english, not my main language.
    Board: MSI b85-g43
    Bios: c.40
    VGA:   amd 7970 black edition
    PSU:   xfx pro1000w
    Intel Core i5-4670K
    MEM: HyperX 1600 8gb
    HDD: kingston 120gb ssd and two SATAS
    OS: Windows 7 64bit Ultimate

    Svet, thx for replying.
    I'm a noob here and have some doubts about this steps...
    1.) >>Use the MSI HQ Forum USB flasher<< (Ok got it.)
         A.) Download the attached archive and place it on your desktop. Do not decompress. (Ok got it)
         B.) Download and install the Forum flash tool. (MSI HQ Forum USB flasher?)
         C.) Insert your FAT32 formatted usb stick. (Ok got it)
         D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled. (win 8 options??? i'm running on a win7 ultimate 64bit)
         E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive. (Ok got it.)
         F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. (ok got it, change boot sequence to USB and follow the directions.)
    Yeah i know a lot of doubts, sorry for that, Working all day and at night i have to go to the university.
    Thank you for your time!!!

  • Why, when have more than one tab on Firefox it generates message Exc in ev handl: Error: Bad NPObject as private data! which then opens each site in a new browser

    I like to work with about 6 tabs open on Firefox and typically this has been absolutely fine. Starting around November 2011 each time I have multiple tabs open when I open a new gmail message, or open an order or any other action within an open page a message pops up that reads
    Exc in ev handl: Error: Bad NPObject as private data!
    then that site immediately opens in a new browser window.
    I do not have this issue with Google Chrome or Internet Explorer but I would rather use Firefox. I ran McAfee an extra time thinking it might be a virus but that did not help. Any ideas?

    That issue can be caused by the McAfee Site Advisor extension
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode

  • Can I have more then one .mac email account?

    I have just purchased a new Mac Air, I have a .mac account and wanted to setup an email account for my wife. Is there a way to set up an additional [email protected] account without purchasing an additional .mac? If this is possible how do I do it? Also is the a way to post step by step directions?

    Depends. If having her use an alias (i.e., an alternate email address that goes to the same mail account) is an acceptable solution, then you can do it. Then you can set up separate smart mailboxes to filter your email to one mailbox and hers to another.
    Here is the help topic on creating an alias:
    You can create up to five email aliases to help prevent unwanted messages from being sent to your primary MobileMe Mail account or for use with online groups and chat websites. For example, you might want to share your main MobileMe Mail address with friends and family only and use email aliases for online registrations, purchasing products, joining mailing lists, and so on. This will help you better manage the email you receive and make it easier to monitor the sources of unwanted messages. You can even send email using an email alias.
    To create an email alias:
    In MobileMe Mail on the web, choose Preferences from the Action pop-up menu in the toolbar at the top of the window.
    Click Aliases at the top of the pane, and then click the Create Alias button. If you already have an alias, click “Add alias.” You can maintain up to five aliases at a time.
    Enter an email alias and a name, which will appear in the “From” field of the recipient’s email, in the text fields provided.
    Choose a color for messages received by the alias. Email sent to an alias appears in your MobileMe Mail inbox on the web in the color you choose.
    Click Create. By default, an alias is active when it is created. To deactivate an alias, deselect the Active checkbox next to it. When an alias is turned off, all email messages addressed to that alias are returned to the sender.
    Click Save.
    When you’re ready to send an email, you can use the Account pop-up menu in the message header to choose the alias you want it sent from. For more information about using aliases, see Related Topics below.

  • Can't have more then one computer online on same network

         Hi there, came across a weird issue. I have a macbook pro, I wiped my iMac and brought it as a gift for my parents. I wanted to demonstrat how we can use ichat. I created an account for my parents and have my own. However, only one computer can be logged on at a time on our network. However at my place when I was working on the iMac, both could be logged in no problem. The only difference here at ther place is I have a aiport Extreme Base Station. Would this be causeing it. Thanks

    Hi,
    In any router you can set how many Computers or devices can be linked or use it to access the internet.
    How it is done can vary and there could be various options accessible on one device.
    This is an older firmware for a Base Station but I am sure you can follow.
    Uploaded with Skitch!
    This is the Internet Tab/Icon at the top and the Internet Connection tab
    The top part is how the Base Station connects to any Modem (uplink)
    The red Box bit is what it is doing to the LAN side.  Share an Public IP is in fact DHCP to the LAN
    The DHCP Tab set the IP range (192.168.xxx.xxx or 10.0.1.xxx and so on) and the Limits of that range (i.e 1 to 254 IP addresses)
    Uploaded with Skitch!
    You could limit the range to 1 IP
    I actually do this on my router so that I know it is limited to the 2 wifi computers and the 4 phones.
    You will notice that the Base Station will get the IP of 192.168.1.1 in this case.
    That also leaves IPs 192.168.1.2 through 192.168.1.100 "spare" and along with those above .200  til the end of the range (255).
    The Mac can then be set to do "Manually with DHCP" and use a Static Address (Using an IP in the "spare" areas).
    You will also notice that there is a box where known computer or devices can have their IP listed so they always get the same IP.  (reservations)
    Using a limit scope of IP addresses and this can also exclude "newcomers"  as there may not be any "free" spaces in the usable range.
    Now...
    If the first Pic is set to anything but Share an IP then it is most likely that the Base Station is not doing DHCP to the LAN and the computer is set up to use a Static (Manually) set address.
    One option is "Bridge (Off) Mode" which is DHCP Off  (I forget what the other option is)
    This may Limit how many computers can acces the base Station (Particularly if visitors are set to "Using DHCP" in System Preferences > Network > TCP tab in the Advanced button)
    PPPoE
    In the top pic the connection Uplink might be using PPPoE
    This can also be "passed on" to another device,  which may be the Computer, which in turn would isoslate any other computer joining the LAN.
    Hope that give you enough clues to find out what he has set
    10:14 PM      Friday; March 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have multiple Iphoto libraries. I would love to have them all on my IPAD. However only one is copy to my Ipad. How can I have more then one? TX

    On my MAC I have 4 libraries (just one was to big). I would love to copy all of them on my IPAD. How can I do this?
    Thanks
    Michel

    http://support.apple.com/kb/HT5824?viewlocale=en_US&locale=en_US

Maybe you are looking for