E 63 Wirelesss LAN

What is meant my Wireless LAN?
I bought Nokia E 63 Phone having Wireless LAN option. i asked my Org IT Dept Team to configure the Settings, they put the settings for my phone as:
Ip4&Ip6 : Automatic
DNS(Primary& Secondary): Automatic
Port :0
WPA
Public
Infrastructure......etc
ok , now i am able to acess internet in my phone when i am in office.
My doubt is: what ever the Web Address we are typing in the Phone , while in in office(Browsing, (Downloading) are all be recorded in server?
afterwards they can decrypt the webaddress what ever i had seen and can they know from my phone , the web addres are used , even though my phone is in Automatic IP settings?
is there any alternate route that the web address should not record in the server?
i am waiting for ur reply.

Hello there!!!!!!!!!!!!!
Happy new year and hope u all had a fab xmas.
I want to ask everyone thatif anyone knows the solution of my prob, which is, I recently updated my E 63 firmware which is
200.21.012
RM-437
E63-1(247.02)
After Installation I found 2 following problems....
1)After this updatation I can not connect to Wi-Fi, I tried numerous times to configure my device, but no solution.
2) I installed latest version of nokia email messaging software, and in that i can not retreive emails older than 3 days. I can not change the no. of retreival days. Even i did not find the oldest version of nokia email messaging on the website. If any one knows the oldest version link, please reply to this post.
If this problem is with this firmware then its fine, or if ther's any solution , please let me know.
Can any one suggest me is it possible to install older version of firmware which is 100.0......, and any link to download older firmware.
Thank you very much.
Cheers
Raj

Similar Messages

Error when installing webauth certificate virtual wireless LAN controller

Hi there
I am having issues installing web auth certificate for our virtual wirelesss LAN controller.
I am issuing a certificate from our own PKI in following format
device cert for WLC > Intermediate > our root cert.
I have followed the discussion here
https://supportforums.cisco.com/discussion/10890871/generating-csr-wlc-5508
and the document here
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html#support
However I am still getting the following errors
*sshpmLscTask: Jun 30 17:18:26.443: sshpmLscTask: LSC Task received a message 4
*TransferTask: Jun 30 17:18:28.785: Memory overcommit policy changed from 0 to 1
*TransferTask: Jun 30 17:18:28.785: RESULT_STRING: FTP Webauth cert transfer starting.
*TransferTask: Jun 30 17:18:28.785: RESULT_CODE:1
FTP Webauth cert transfer starting.
*TransferTask: Jun 30 17:18:33.154: ftp operation returns 0
*TransferTask: Jun 30 17:18:33.154: RESULT_STRING: FTP receive complete... Installing Certificate.
FTP receive complete... Installing Certificate.
*TransferTask: Jun 30 17:18:33.154: RESULT_CODE:13
*TransferTask: Jun 30 17:18:37.159: Adding cert (8217 bytes) with certificate key password.
*TransferTask: Jun 30 17:18:37.169: sshpmCheckWebauthCert: Verification return code: 1
*TransferTask: Jun 30 17:18:37.169: Verification result text: ok
*TransferTask: Jun 30 17:18:37.171: sshpmAddWebauthCert: Extracting private key from webauth cert and using bundled pkcs12 password.
*TransferTask: Jun 30 17:18:37.361: sshpmDecodePrivateKey: calling ssh_skb_decode()...
*TransferTask: Jun 30 17:18:37.493: sshpmDecodePrivateKey: SshPrivateKeyPtr after skb_decode: 0x2aaaacb51628
*TransferTask: Jun 30 17:18:37.493: sshpmAddWebauthCert: got private key; extracting certificate...
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: extracted binary cert; doing x509 decode
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: doing x509 decode for 1594 byte certificate...
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: failed to validate certificate...
*TransferTask: Jun 30 17:18:37.494: RESULT_STRING: Error installing certificate.
*TransferTask: Jun 30 17:18:37.495: RESULT_CODE:12
*TransferTask: Jun 30 17:18:37.495: Memory overcommit policy restored from 1 to 0
Error installing certificate.
Any help is much appreciated

Similar issue:
https://supportforums.cisco.com/discussion/11043836/wism-42112-and-web-auth-certificate

Can I transfer files from a Mac and PC that are both on my wireless LAN?

I've a number of Macs connected to my Wirelesss LAN and also have a PC (Windows XP) that I want to connect to the network. That isn't going to be a problem but I want to know if I can then move files from the "Mac environment" onto the PC.
If it's possible, how is it done?
Regards,
Cliff

Yes. Just enable the file/folder sharing for each computer. They'll treat it as a network share. I did need to set the options for the Mac folders to use SMB for the PC to see it.

Lenovo G580 20157 Wifi Driver

I can't find Wifi driver for my Lenovo G580 20157. I tried intel and it doesn't work,I tried Atheros,and it also doesn't work.
Screenshot:
Solved!
Go to Solution.

hi GlenMcKenna20,
I see now,
Your system's Intel Wireless software is left but the.
Wireless Device is not being detected.
That atheros there is your Cabled connection and not the wireless
Your wireless should be Intel.
Can you try
Booting into BIOS By turning OFF your Computer.
Turn it back on and right away start tapping F2.
you should be able to boot to this screen
Now go to Configuration tab and make sure the Wirelesss LAN is enabled. then hit F10 To Save the settings and Exit
IF ever it is already Enabled, Disable it and Re enable it then save the settings.
Make sure to save before going out of BIOS, it should work.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Remote Access VPN Clients Cannot Access inside LAN

I have been asked to set up remote access VPN on an ASA 5505 that I previously had no invlovement with. I have set it up the VPN using the wizard, they way I normally do, but the clients have no access to anything in the inside subnet, not even the inside interface IP address of the ASA. Thay can ping each other. The remote access policy below that I am working on is labeled VPNPHONE, address pool 172.16.20.1-10. I do not need split tunneling to be enabled. The active WAN interface is the one labeled outside_cable.
: Saved
ASA Version 8.2(1)
hostname ASA5505
domain-name default.domain.invalid
enable password eelnBRz68aYSzHyz encrypted
passwd eelnBRz68aYSzHyz encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.100.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group dataDSL
ip address 76.244.75.57 255.255.255.255 pppoe
interface Vlan3
nameif dmz
security-level 50
ip address 192.168.9.1 255.255.255.0
interface Vlan10
nameif outside_cable
security-level 0
ip address 50.84.96.178 255.255.255.240
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns server-group DefaultDNS
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Netbios udp
port-object eq 139
port-object eq 445
port-object eq netbios-ns
object-group service Netbios_TCP tcp
port-object eq 445
port-object eq netbios-ssn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.100.177
network-object host 192.168.100.249
object-group service Web_Services tcp
port-object eq ftp
port-object eq ftp-data
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_10
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_11
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_2
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_3
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_4
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_5
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_6
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_7
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_8
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network DM_INLINE_NETWORK_9
network-object host 192.168.9.10
network-object host 192.168.9.4
object-group network VPN
network-object 192.168.255.0 255.255.255.0
access-list outside_access_in extended permit icmp any host 76.244.75.61
access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp
access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp-data
access-list outside_access_in extended permit tcp any host 76.244.75.62 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.62 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.59 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.59 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.60 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.60 eq https
access-list outside_access_in extended permit tcp any host 76.244.75.58 eq www
access-list outside_access_in extended permit tcp any host 76.244.75.58 eq https
access-list dmz_access_in remark Quickbooks
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_6 host 192.168.100.5 eq 56719
access-list dmz_access_in remark Quickbooks range
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_7 host 192.168.100.5 range 55333 55337
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_8 host 192.168.100.5 eq 1434
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_9 host 192.168.100.5 eq 49398
access-list dmz_access_in remark QB
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_10 host 192.168.100.5 eq 8019
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_2 host 192.168.100.5 eq 2638
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_11 host 192.168.100.5 object-group Netbios
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_3 host 192.168.100.5 object-group Netbios_TCP
access-list dmz_access_in extended deny ip host 192.168.9.4 host 192.168.100.5 inactive
access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_4 any
access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_5 any
access-list dmz_access_in remark Printer
access-list dmz_access_in extended permit ip 192.168.9.0 255.255.255.0 object-group DM_INLINE_NETWORK_1
access-list dmz_access_in extended permit tcp 192.168.9.0 255.255.255.0 any object-group Web_Services
access-list dmz_access_in extended permit udp 192.168.9.0 255.255.255.0 any eq domain
access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.255.0 255.255.255.0 echo-reply
access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.100.0 255.255.255.0 echo-reply log disable
access-list dmz_access_in remark QB probably does not need any udp
access-list dmz_access_in extended permit udp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
access-list dmz_access_in remark QB included in other rule range
access-list dmz_access_in extended permit tcp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
access-list dmz_access_in remark May be required for Quickbooks
access-list dmz_access_in extended permit icmp host 192.168.9.4 host 192.168.100.5
access-list CAD_capture extended permit ip host 192.168.9.4 host 192.168.100.5
access-list CAD_capture extended permit ip host 192.168.100.5 host 192.168.9.4
access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 172.16.10.0 255.255.255.240
access-list inside_nat0_outbound extended permit ip any 172.16.20.0 255.255.255.240
access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.100.0 255.255.255.0
access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.9.0 255.255.255.0
access-list dmz_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
access-list outside_cable_access_in extended permit icmp any host 50.84.96.182
access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp
access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp-data
access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq https
access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq www
access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq https
access-list Local_LAN_Access standard permit host 0.0.0.0
access-list vpnusers_spitTunnelACL extended permit ip 192.168.100.0 255.255.255.0 any
access-list nonat-in extended permit ip 192.168.100.0 255.255.255.0 172.16.20.0 255.255.255.0
pager lines 24
logging enable
logging buffered informational
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu outside_cable 1500
ip local pool VPN_IP_range 192.168.255.1-192.168.255.10 mask 255.255.255.0
ip local pool VPN_Phone 172.16.20.1-172.16.20.10 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat-control
global (outside) 10 interface
global (outside_cable) 10 interface
nat (inside) 0 access-list nonat-in
nat (inside) 10 0.0.0.0 0.0.0.0
nat (dmz) 0 access-list dmz_nat0_outbound
nat (dmz) 10 0.0.0.0 0.0.0.0
static (inside,outside) 76.244.75.62 192.168.100.25 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.61 192.168.9.123 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.59 192.168.9.124 netmask 255.255.255.255 dns
static (dmz,outside) 76.244.75.58 192.168.9.4 netmask 255.255.255.255 dns
static (inside,dmz) 192.168.100.0 192.168.100.0 netmask 255.255.255.0
static (dmz,outside) 76.244.75.60 192.168.9.10 netmask 255.255.255.255 dns
static (inside,outside_cable) 50.84.96.183 192.168.100.25 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.182 192.168.9.123 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.180 192.168.9.124 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.179 192.168.9.4 netmask 255.255.255.255 dns
static (dmz,outside_cable) 50.84.96.181 192.168.9.10 netmask 255.255.255.255 dns
access-group outside_access_in in interface outside
access-group dmz_access_in in interface dmz
access-group outside_cable_access_in in interface outside_cable
route outside_cable 0.0.0.0 0.0.0.0 50.84.96.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.100.0 255.255.255.0 inside
http 204.107.173.0 255.255.255.0 outside
http 204.107.173.0 255.255.255.0 outside_cable
http 0.0.0.0 0.0.0.0 outside_cable
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_cable_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_cable_map interface outside_cable
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp enable outside_cable
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet 192.168.100.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.100.0 255.255.255.0 inside
ssh 204.107.173.0 255.255.255.0 outside
ssh 204.107.173.0 255.255.255.0 outside_cable
ssh 0.0.0.0 0.0.0.0 outside_cable
ssh timeout 15
console timeout 0
vpdn group dataDSL request dialout pppoe
vpdn group dataDSL localname [email protected]
vpdn group dataDSL ppp authentication pap
vpdn username [email protected] password *********
dhcpd address 192.168.100.30-192.168.100.99 inside
dhcpd dns 192.168.100.5 68.94.156.1 interface inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 192.168.100.5
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy cad_supplies_RAVPN internal
group-policy cad_supplies_RAVPN attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value cad_supplies_RAVPN_splitTunnelAcl
group-policy VPNPHONE internal
group-policy VPNPHONE attributes
dns-server value 192.168.100.5
vpn-tunnel-protocol IPSec
split-tunnel-policy excludespecified
split-tunnel-network-list value Local_LAN_Access
client-firewall none
client-access-rule none
username swinc password BlhBNWfh7XoeHcQC encrypted
username swinc attributes
vpn-group-policy cad_supplies_RAVPN
username meredithp password L3lRjzwb7TnwOyZ1 encrypted
username meredithp attributes
vpn-group-policy cad_supplies_RAVPN
service-type remote-access
username ipphone1 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone1 attributes
vpn-group-policy VPNPHONE
username ipphone2 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone2 attributes
vpn-group-policy VPNPHONE
username ipphone3 password LOjpmeIOshVdCSOU encrypted privilege 0
username ipphone3 attributes
vpn-group-policy VPNPHONE
username oethera password WKJxJq7L6wmktFNt encrypted
username oethera attributes
vpn-group-policy cad_supplies_RAVPN
service-type remote-access
username markh password nqH+bk6vj0fR83ai0SAxkg== nt-encrypted
username markh attributes
vpn-group-policy cad_supplies_RAVPN
tunnel-group DefaultRAGroup general-attributes
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group cad_supplies_RAVPN type remote-access
tunnel-group cad_supplies_RAVPN general-attributes
address-pool VPN_IP_range
default-group-policy cad_supplies_RAVPN
tunnel-group cad_supplies_RAVPN ipsec-attributes
pre-shared-key *
tunnel-group VPNPHONE type remote-access
tunnel-group VPNPHONE general-attributes
address-pool VPN_Phone
default-group-policy VPNPHONE
tunnel-group VPNPHONE ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 1500
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8b25ecc61861a2baa6d2556a3679cc7c
: end

Hi,
You have your "group-policy" set so that you have excluding some networks from being tunneled.
In this access-list named Local_LAN_Access you specify "0.0.0.0"
Doesnt this mean you are excluding all networks from being tunneled? In other words no traffic goes to your tunnel.
This access-list should only contain your local LAN network from where you are connecting with the VPN Client. If you dont need to access anything on your local LAN while having the VPN on, you don't even need this setting on. You could just tunnel all traffic instead of excluding some networks.
- Jouni

"securely" use one ethernet interface for WAN and other for the LAN

I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
(Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
Thank you in advance,
Ion Webster

First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
(s)FTP
Calendar publishing
mail(at a later time)
Thank you for your help thus far.
Ion Webster

LAN settings for HP LaserJet 500 Color MFP M575: printing OK, network access NO

Printing OK but Network access NOI have a M575 in office LAN.IP 169.254.204.142Subnet 255.255.255.000Router 169.254.204.1Other computers 169.254.204.2-100Everything was good. But couple days ago I was not able to connect to my HP from browser. I was check settings and: IP address on screen HP - 0.0.0.0 I can printing on my HP!!! (destination of printing is: HPLaserJet500ColorMFPM575)but can’t to change settings. I can't change IP adres in JETDIRECT printer's menu. In command prompt PING of 169.254.204.142 is OK… Hand settings IP on start (1/8 click ), searching in administrative menu, cold reset… nothing I don’t know what I can to do else.

This is my IPConfig screen:C:\>IPConfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : T420
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
#2
Physical Address. . . . . . . . . : 60-D8-19-D8-A4-3B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 6:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-66-CA-38
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::385f:1def:62ae:8cd5%75(Preferred)
IPv4 Address. . . . . . . . . . . : 169.254.204.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 29 xxxxxxxxxxx 2015 15:25:46
Lease Expires . . . . . . . . . . : 30 xxxxxxxxxxx 2015 15:25:46
Default Gateway . . . . . . . . . : 169.254.204.1
DHCP Server . . . . . . . . . . . : 169.254.204.1
DHCPv6 IAID . . . . . . . . . . . : 1610621388
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-69-54-50-00-1E-37-1A-5A-E8
DNS Servers . . . . . . . . . . . : fe80::5ef9:6aff:fedf:5f3b%75
169.254.204.1
169.254.204.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6205
Physical Address. . . . . . . . . : A0-88-B4-D2-3E-B0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 57:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{32EA8AA7-0304-411D-9B3C-9BE6D6E53F7D}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 135:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0E880DF2-FD27-4BF8-BBD9-EA726316C1FE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FFBD17DC-A12B-469A-8135-C63D9BBEBB31}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #6
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\>

How can I only allow my Apple TVs access to my LAN?

In my set-up, I have three Apple TVs in separate rooms all connected to a LAN via their ethernet ports. They are connected via a switch to my Airport Extreme and my Mac Mini is also connected to Airport as an iTunes server. The Airport runs a WiFi network for internet access but I don't want people to be able to plug their computers into my LAN and have access to the whole set-up.
What can I do to achieve this?
I don't want the Apple TV's to rely on the WiFi so I can use MAC Address Filtering, since it is patchy and streaming HD videos is more stable via ethernet. I have looked into setting-up an 802.1x network but when investigating the Configurator app to set-up the Apple TVs to access an 802.1x network it refers only to WiFi set-ups again. Also, I don't know much about RAIDUS servers and authentication, such as whether I'd need any additional hardware etc.
Any help would be gratefully received.
JB

...any app launched from /Applications holds only the permissions of the user launching the app, regardless of the owner (presumably because anyone, including "root" can install applications into /Applications).
It has nothing to do with where the application is installed. Any executable runs with the permissions of the user who runs it. The only exception is a binary executable with the SUID or SGID bit set, and then only if it's on the root device, and only if it's not an Aqua application. The SG/UID bits are ignored otherwise.
So, anyone who has installed Wireshark from the "native .dmg" by drag-and-dropping won't be able to use the suid trick because the OS will ignore the suid permissions.
Sorry, I don't understand this at all. Wireshark invokes dumpcap as a child process to capture packets. If dumpcap is installed anywhere on the root device as SUID root, then it will run as root regardless of who invokes it.
The suid method will only work for Macports and Fink installations...
That's not correct. There are many SUID or SGID executables in a default installation of the Mac OS, and none of them comes from MacPorts or Fink.

Can not connect outside of Lan to with rtsp PVC2300

I have the following cameras set up at my office
1 - PVC2300
2 - WVC54GC
3 - AXIS 225FD
I have a BEFSR81 Router
I have a computer on Windows XP running the surv software to record. Everything with that is good.
I also have 2 desktops.
I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
1(a). I can not connect outside of the LAN with RTSP with either the VLC player or quicktime. It connects and asks for a password and then just hangs.
The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router. What am I missing?
1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well, so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
2. The voice with the PVC 2300 using http outside of the LAN (internet) lags quite baddly and is choppy. This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem. But it also happens when I connect to just the PVC2300. I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy? I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back. I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either. Suggestions?
3. This is more of a question. I know the mobile streaming of the PVC 2300 does not include voice. Is there an app or way that I can just get it to my Blackberry. Even if I didnt get the video, voice is sometimes more important to me.
I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
Thank you in advace for your help.
Colin

Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
Regarding RTSP access, are you also including the mobile.sdp in the URL?
RTSP:///mobile.sdp I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box. That word may be what you have to include, so check that too...
Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
But your forwarded ports look right and should be opened.
Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

Conta controle, lançamento errado

Olá,
Estou com a seguinte situação:
A empresa trabalha com uma conta controle para cada PN, ou seja, em vez de uma
conta controle comum para todos os clientes(como é padrão do B1), existe uma
conta controle para cada cliente.
No entando, foi possível alterar a atribuição de uma conta para alguns clientes
depois de lançado um documento fiscal, criou-se C/R(débido), depois que inseriu a nota,
com uma conta controle X , mas no recdebimento (crédito) foi lançado em outra conta Y,
pois o B1 permitiu a mudança de conta entre uma transação e outra, dando
inconsistência no saldo do cliente.
Favor, existe alguma forma viável de realizar lançamento manual com contas
controle de forma a zerar todas e transferir os saldos para apenas uma conta
controle e utilizá-la para todos os PNs?
Posso fazer um upgrade via DTW mudando a conta controle dos PNs para uma
conta comum, como é padrão do B1?
Obrigado!!
Lucidio

Lucidio,
Eu estou com uma localizaçao do Chile, mas acho que a forma dos tratamentos contavels é igual ao Brasil.
Aqui vc pode imputar diretamente um PN via lançamento manual, usando um atalho de teclas. na linha do JournalEntry coloque o codigo de PN e logo presione CTRL+TAB, com isso esta dizendo que vai imputar um PN e nao uma conta do maior.
Tem que ademais, na grilha, visualizar o campo Conta do maior ou controle que é a conta que vc vai imputar. troque aquela conta pela conta que quer imputar e depois na siguente linha deixa a conta certa, só pra azerar a transaçao.
qualquer duvida, estou atento.
Desculpa meu portugues, mas eu sou chileno.

Lançamento de NF complementar de ICMS

Bom dia senhores,
preciso de ajuda em algo simples, mas para mim que não conheço muita coisa de SAP é complicado de fazer, vamos lá:
Minha empresa fez uma compra em outro estado e foi gerado a NF dessa compra, porém nessa mesma compra foi gerada outra NF complementando o ICMS-ST.
O Valor da NF original está correto, a segunda complementar só altera o valor do ICMS.
Não sei como lançar essa segunda NF. Se eu fizer o lançamento normal, o SAP verá como uma nova compra. Como eu lanço essa NF fazendo referência à primeira nota de forma que seja complementado somente o valor do ICMS?
Acredito que seja algo simples, mas eu não sei mesmo como fazer.
Att,
Jackson Vilela

Boa noite Jackson, você está usando algum addon para NFe?
Normalmente nos manuais destes addons tem uma explicação sobre como lançar o documento.
Aguardo mais informações.
Att,
Rodrigo da Costa Feula

Para a chave de conta não há regras de lançamento - Nº mensagem FF714

Estamos criando um ordem de compra, e quando vamos salvar não conseguimos, da a seguinte mensagem:
"Para a chave de conta nãa há regras de lançamento
Nº mensagem FF714
*Diagnóstico*
*Para a chave de conta definida no esquema de cálculo de imposto, ainda não se definiram regras de lançamento na tabela T007B.*
Procedimento
Modificar o esquema de cálculo de imposto, entrar uma chave de conta já definida na operação respectiva ou definir as regras de lançamento para uma nova chave de conta na tabela T007B.
E não conseguimos identificar o porque, estamos usando a TAXBRA e já verificamos as seguintes transações:
- OBYC
- OB40
- OBCN
Enfim alguém já passou por esse problema ?
Grato
Claudio Bezerril

Oi Eduardo,
Desculpe, só hoje vi a sua resposta.
Na verdade, o erro estava ocorrendo por conta de uma condition (BX01) que não estava marcarda com estática.
Obrigada,
Tathiane.

Lançamentos de conhecimento de frete de compras

Pessoal,
Estamos implementando um novo software de comércio exterior aqui na empresa, ainda na versão 4.6C.
Diferentemente do cenário que temos atualmente para o novo cenário customizamos uma pricing de pedido de compras composta de várias condições para lançamentos dos custos complementares tais como seguro, frete, despachante, etc.
Para todas as despesas conseguimos sem problemas efetuar as entradas dos custos complementares na MIRO, com exceção do frete.
O que acontece é que o SAP standard não lê as tabelas de exceções de ICMS para frete (categorias de NF C1 / C5) e aqui temos esses cenários. Quando a MIRO é feita o sistema identifica a categorias de NF = C1 e lê a alíquota da tabela principal de ICMS (coluna frete) resultando em erros de cálculo de impostos para os cenários onde existe a exceção de ICMS.
Gostaria de saber se alguém já passou por isso e quais as possibilidades de contornar essa situação. Tentamos via debug identificar possíveis exist na MIRO onde pudéssemos colocar uma validação interna para forçar a situaçao de leitura da exceção, porém não obtivemos sucesso nessa tentativa.
Desde já agradeço pela ajuda que puderem dar.
Abraços,
Nilmar
Siemens LTDA.

Discussão movida de Comunidade SAP em Português (Portuguese Language Community) para Aplicações do SAP Business Suite (SAP Business Suite Applications)

Problema com Lançamento de Custos Complementares na MIGO

Boa Tarde pessoal, tudo bom?
Estou escrevendo aqui no Grupos para ver se alguem pode me ajudar.
Aqui na empresa onde estou trabalhando estamos com um caso muito estranho acontecendo em alguns pedidos. E o pior o caso acontece de forma intrmitente, ou seja não acontece em todas as vezes muito menos em todos os pedidos.
Confesso a vocês que ja não sei mais o que fazer e onde analizar, principalmente por que não consegui simular o problema nem no QAS nem no DEV.
Bom vamos ao problema:
Ao entrar a MIGO de alguns pedidos com condição de frete, no memento que o sistema lança o Custo complementar de aquisição, ocorre algum bug, erro, magia, sei la e ele registra 2 documentos com EXTAMENTE o mesmo numero, porem com VALORES DIFERENTES.
Vejam exemplo REAL:
5000746331 - 2.182,82 BRL
5000746331 - 2.191,77 BRL
5000746330 - 2.147,93 BRL
5000746330 - 2.155,99 BRL
Alguem ja viu isso acontecer?
Alguem sabe por que isso acontece?
Mais ainda alguem, por favor, sabe como resolver?
Agradeço a atenção de todos
E mais ainda pela ajuda
Att
Rogério Gonçalves
Consultor MM
Rogério Gonçalves
Consultor MM

Movento para o forum correto.
Abs,
Henrique.

Erro Lançamento CT-e com CST 60 - Erro M8 534 - Monitor CT-e

Prezados, Boa Noite!
Estamos tentando realizar um lançamento no sistema de um conhecimento de transporte eletrônico CT-e com CST 60 pelo módulo GRC, ao simular esse lançamento encontramos um erro que acreditamos ser um erro de produto.
Abaixo segue TAG do XML.
Fizemos todas às analises e chegamos à conclusão de que no momento em quem o GRC está realizando a simulação do lançamento no ECC o mesmo está passando para a função MRM_INVOICE_CREATE no parâmetro I_RBKPV-RMWWR o valor líquido do conhecimento de transporte, entendemos que nesse campo deveria ser passado o valor total do CT-e e não o valor líquido do mesmo.
A fim de validar se o fato relatado acima é realmente o erro que esta ocorrendo, pegamos os parâmetros que o GRC estava passando para essa função e mudamos apenas o conteúdo no parâmetro I_RBKPV-RMWWR, para que o mesmo assumisse o valor liquido + impostos, ao realizar a mudança desse valor o erro parou de acontecer.
Para validar se o erro estava somente no GRC pegamos o mesmo pedimos e lançamos de forma manual um MIRO no ECC, o lançamento no ECC ocorreu sem nenhum problema o que nos faz acreditar mais ainda que possa ser um erro no produto. Abaixo segue print detalhado do erro que estamos encontrando.
Monitor GRC – CT-e
Observem que na imagem acima do monitor todas as informações relativas à taxa de imposto, Montante do Imposto e Montante Básico estão com os valores idênticos no momento da simulação, no momento que o usuário vai registrar os dados da simulação o sistema dá uma mensagem de erro informando que os valores de débito e crédito não batem, observem no monitor que os valores são os mesmos.
Ao tentar realizar o mesmo lançamento através da transação MIRO no ECC não encontramos nenhum problema os valores são calculados corretamente sem nenhum problema.
Abaixo segue print dos valores que estão chegando da função MRM_INVOICE_CREATE.
Abaixo segue detalhes da configuração do IVA
Já configuramos o IVA com CST1 e CST2 mas nao conseguimos obter sucesso no lançamento pelo GRC

Sim Eduardo,
Finalizado.
Deu trabalho mas ficou muito bom.

E 63 Wirelesss LAN

Similar Messages

Maybe you are looking for