E-Mail Alerts / Forum

Hello,
I've set specific e-mail address (the Address of Moderator) to be notified if a question has gone unanswered in the forums for a given period of time.
You can see teh procedure in this link (help)
http://help.sap.com/saphelp_nw04/helpdata/en/44/93cd4496b610bbe10000000a422035/frameset.htm
Unfortunately this setting has any function, and i didn't get any Email, while a question has gone unanswered in the forum for a period of time(in my case 1 hour).
Has somebody any experience with that?
Thanks and best regards

Hi Katayoun,
You can see this topic Setting E-Mail Alerts from SAP Library:
http://help.sap.com/saphelp_nw04/helpdata/en/44/a1baf02bc3340ce10000000a155369/frameset.htm
Hope this link will be helpful for you.
Regards,
Lubi

Similar Messages

E-mail alerts not working properly

I have a problem with my Tour which has put me in some awkward situations- like in court and work meeting- not good.
The e-mail alert makes an audible noise even when the setting is programmed for silent. My original Tour worked fine at first, and after about 3 weeks the problem appeared. Verizon replaced the phone and now the replacement worked fine at first and is now messing up after about 3 weeks.
I need a fix for this problem. I saw someone else described the same problem on the Storm forum. It appears it might be a software issue.

"Normal" is what you set it to be (with or without email alerts, etc). Loud and Silent should be evident as well.
I still think you have some setting to override the silent profile for something.
If you look at the Silent profile and check the email settings for volume, etc., everything is set to off or mute or whatever would be appropiriate for "silent'?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sending e-mail alerts in Microsoft Project 2010

I'm using Microsoft Project 2010 in creating my project. While adding my tasks I want to be able to send an e-mail alert to my resources indicating a task is coming up or the task is overdue. What do I have to do?

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

Auto mail alert on ID lock

Hi All,
I am looking to send auto mail alerts to user when the ID is locked due to incorrect logon attempts or advance mail alert if the ID is about to expire in couple of days.....I was expecting that SAP ECC provides standard way to deal with this as any other application....
It so happens that the user comes to know about the ID expiration on the day when he tries to logon and the pain going through support process waiting for day to get it resolved.......There should be proactive way to deal with this kind of situation so that the user is alerted in advance without causing business impact waiting for it to be resolved...
Any suggestions on how this can be achieve???
Regards,
Milan

There is nothing in standard, but it is very easy to implement on your own if you need it. I also found a way to lock / unlock in intervals (try the factory calendar...) and the user BAPI's can do just about anything which SU01 can do as well.
A downside to that which you are attempting is that a mail alert to tell someone that their password has been locked or is about to be locked would "trigger" them to logon only for the purpose of keeping the account alive. Some people do this anyway and is the wrong motivation for a person to keep their user ID in the system. So your users will start appearing to be more active, where in fact they are not actually using the system.
If for your levels of user activity and intervals (e.g. quarterly planning) the policy is too strict, then you can either relax the policy or use user groups to isolate one of them as an execption.
There was at least one question asked before which provided many details on how and why to do this. Just make a simple search.
Cheers,
Julius
> Total Questions: 46 (42 unresolved)
Please clean up your neglected questions. The "Comment" field is not mandatory when closing a thread (to avoid bumping all ancient irrelevant questions to the top of the forum again).

Can SunMC send mail alert to sysadmin for any hardware failure?

Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?
2. does SunMC monitor Sun Fire T2000 hardware fully?

Hi EricTan,
erictan wrote:
Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?The out-of-the box notifications in SunMC must be set up for every data point on every system, which can be a pain to configure and manage in all but the smallest environments. And as you've noticed, for some hardware attributes there are no "Actions" tabs the allow you to configure email. To gain the features of centralized notification, and to get alarms from all sources of events in SunMC, you should consider installing [PrimeAlert EventAction|http://www.halcyoninc.com/products/EventAction/index.php] . It ships with a 30-day eval license, and if you need any help setting it up, please let me know.
2. does SunMC monitor Sun Fire T2000 hardware fully?Yes, the Tx000 series systems have some of the best hardware support available in SunMC. As an example you can look at a T2000 screenshot and list of hardware info [in this post about SunMC and xVM Ops Center|http://forums.halcyoninc.com/showthread.php?t=109] .
Regards,
Regards,
[email protected]
[http://www.HalcyonInc.com|http://www.HalcyonInc.com]
New !! : [http://forums.HalcyonInc.com|http://forums.HalcyonInc.com] !!

E-mail alert not activating

I think I am starting to learn about this site now. So hopefully I am asking the question in the right place. I have a new 8520, making some progress as e-mail is working and internet accessible but I cannot get the e-mail alert to work and the e-mail appear to be self deleting after a few minutes. Any help or advice welcome.

Hi dahliaeng and welcome to the BlackBerry Support Community Forums!
Have you tried changing the current sound profile on your BlackBerry® smartphone? You can do so by going into the Sounds and Alerts Profiles application from your home screen.
As for why they are deleting after a few minutes, what type of email account do you have configured?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How can I turn off the New Mail alert on my iPod Touch?

I have an iPod Touch (version 6.1.3). The other day I was waiting for an important e-mail, so I turned on the New Mail alert. It worked fine. Now I want to turn it off, but I can't. I went into Settings and then to Sounds and changed the selection from the sound I'd selected ("Bell") to None. It says "None" but every time I get a new e-mail, it still makes the bell sound.
I also tried going into Notifications and then to New Mail Sound and setting it to "None" but that didn't change anything
Any ideas what I'm missing?
Thanks!

Try removing the mail totally from your notifications center.
I have everything turned off and the banner set to none.

How to send e-mail alert to the user job is successful or failed.

Hi Experts,
I have scheduled a job using DBMS_JOB Package; in this job I am calling a procedure.
How can we send an e-mail(alert) to the user if the job is successful (or) job fails.
If the job is successfully completed, then we have to send mail as “Job is completed successfully along with job name”.
If the job fails we have to send email as “error message of the job along with job name”(why the job is failed).
This alert should be sending automatically no manual intervention.
Please help me.
     CREATE OR REPLACE PROCEDURE APPS_GLOBAL.arc_procedure (P_ID IN NUMBER)
     IS
     CURSOR C IS SELECT id,table_name,archive_table_name,where_condition
     FROM apps_global.control_ram
     WHERE id = p_id
     ORDER BY id, table_name;
     BEGIN
        FOR I IN C
        LOOP
           EXECUTE IMMEDIATE
              'INSERT INTO '
           || I.ARCHIVE_TABLE_NAME
           || '
     (SELECT * FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || ')';
           EXECUTE IMMEDIATE
              'DELETE FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || '';
           COMMIT;
        END LOOP;
     EXCEPTION
        WHEN OTHERS
        THEN
           ROLLBACK;
           DBMS_OUTPUT.PUT_LINE (
           'An error was encountered - ' || SQLCODE || ' -ERROR- ' || SQLERRM);
     END arc_procedure;
     /This is my job.
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job       => X
   ,what      => 'APPS.arc_procedure(1);'
   ,next_date => to_date('05/01/2013 00:00:00','dd/mm/yyyy hh24:mi:ss')
   ,interval => 'TRUNC(SYSDATE+1)'
   ,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
/Thanks in advance.

Hi,
I think you can do by creating mailing procedures and call it in the loop and outside the loop.
There would be two procedure one in inside loop which will execute after successfull completion of the loop.
Other would be in the exception block like i shown in the below code you have written;
V_variable_1 you can use as a parameter for what is the error occured.
like suppose your mailing procedure name is Status_email and Status_email_1.
CREATE OR REPLACE PROCEDURE APPS_GLOBAL.arc_procedure (P_ID IN NUMBER)
     IS
     CURSOR C IS SELECT id,table_name,archive_table_name,where_condition
     FROM apps_global.control_ram
     WHERE id = p_id
     ORDER BY id, table_name;
V_VARIABLE_1 NUMBER;
V_VARIABLE_2 VARCHAR2(400);
     BEGIN
        FOR I IN C
        LOOP
           EXECUTE IMMEDIATE
              'INSERT INTO '
           || I.ARCHIVE_TABLE_NAME
           || '
     (SELECT * FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || ')';
           EXECUTE IMMEDIATE
              'DELETE FROM '
           || I.TABLE_NAME
           || ' WHERE '
           || I.WHERE_CONDITION
           || '';
           COMMIT;
                 STATUS_EMAIL;
        END LOOP;
     EXCEPTION OTHERS THEN
V_VARIABLE_1 :=SQLCODE;
V_VARIABLE_2 :=SQLERRM;
           ROLLBACK;
STATUS_EMAIL_1(V_VARIABLE_1,V_VARIABLE_2);
     END arc_procedure;
     / You can refer to sample email procedure i have created for you.
CREATE OR REPLACE PROCEDURE STATUS_EMAIL
AS
   v_From       VARCHAR2(80) := 'EMAIL_ID';
   v_Recipient VARCHAR2(80) := 'EMAIL_ID';
--YOU CAN SEND EMAIL TO MORE THAT ONE USER SO YOU CAN USE LIKE BELOW VARIABLE....
   v_Recipienttt VARCHAR2(80) := 'EMAIL_ID';
   v_Subject    VARCHAR2(80) := 'SUBJECT_FOR_THE_MAIL';
   v_Mail_Host VARCHAR2(30) := 'MAIL_SERVERS_HOST_IP(SMTP_SERVER)';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipienttt);
--OPEN DATA CONNNECTION
UTL_SMTP.OPEN_DATA(v_mail_conn);
--MAIL HEADER
utl_smtp.write_DATA(v_Mail_Conn,'Date: '   || to_char(sysdate, 'DD-MON-YYYY hh:mi:ss AM') || crlf);
utl_smtp.write_DATA(v_Mail_Conn,'From: '   || v_From || crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Subject: '|| v_Subject || ||crlf);
utl_smtp.write_DATA(v_Mail_Conn,'To: '     || v_Recipient || crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Cc: '       || v_Recipienttt ||','|| crlf);
--MAIL BODY
utl_smtp.write_DATA(v_Mail_Conn,'MIME-Version: 1.0'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Content-Type: multipart/mixed;'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,' boundary="-----SECBOUND"'|| crlf ||crlf );
utl_smtp.write_DATA(v_Mail_Conn,'-------SECBOUND'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Content-Type: text/plain;'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Content-Transfer_Encoding: 7bit'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Procedure is successfully complited without error'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Dear All, '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Procedure is successfully complited without error'||'.' ||crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Regards, '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'any_name '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_data(v_Mail_Conn, utl_tcp.CRLF ||'This mail is auto generated.');
--CLOSE CONNECTION
UTL_SMTP.CLOSE_DATA(v_mail_conn);
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/cheers..

E-Mail alerts for queues in SMQ2

Hi,
In a asynchronous IDOC->ABAP Proxy scenario, some of the messages are getting stucked in the transaction SMQ2 in PI system.This happens only when we send 100 IDOCs to PI at the same time and only 5-10 messages are getting stucked with status as "Running". The remaining messages are processed and send to the target system.
I would like to know a solution to trigger an E-mail alert to a specific Mail id if any messages gets stuck in the queue for more than 5 minutes.
Do we need to configure CCMS to achieve this? If so, please let me know the steps.
Thanks and Regards,
Sakthi

Hi Just check for
configure E-mail alerts
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2 By Aravindh Prasanna
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
XI : Configuring CCMS Monitoring for XI- Part I By Naveen Pandrangi
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II By Naveen Pandrangi
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3 by Aravindh Prasanna
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards
Abhishek

Sync issues with Google Calendar and e-mail alerts

Hello,
I'm experiencing a lot of problems with iCal while I'm trying to sync it with Google Calendar. I have correctly inserted my Google account information into iCal, but:
when I create a new event and I disable the e-mail alert and save it, it automatically turns on the e-mail alert! Is there a way to disable by default all alerts? I have already tried to go to Settings - Advanced and select “Disable all alerts” with no result;
all the events I create into iCal are correctly synced with Google Calendar and I can correctly read them on the web app, but in my android device they don't have the time information (they are listed as all-day events)

GooSync would do the trick - http://www.goosync.com/
Plz be aware that Goosync nor Google Contacts supports all field from your phone so it is not an 100% backup unfortunately
JoranG

Mail Alert to Managing Director for every transaction for customer & vendor

Dear Gurus,
Please let me know how & where to do setting for mail alert to Managing Director for every transaction for customer & vendor,
Like for Customer: Sales Order, PGI, Invoice, Payment receipt................
for Vendor: Purchase Order, GR, Miro, Outgoing Payment for Vendor,
Thanks in advance,
Sai

Hi Sai
If you want to set the mail alert to Managing Director for every transaction for customer & vendor Like for Customer Sales Order, PGI, Invoice , PO then maintain at all levels output type and at all levels for those output types assign the authorization as Managing Director
But for what purpose you want to assign the authorization member at all levels, what is your requirement?
Regards
Srinath

E-Mail Alerts/User Accounts

Hi folks,
Is it possible to configure an e-mail alert to the Admin team to flag up when a user has locked their account?
Not interested in any automatic unlocking or anything of that nature. Just a simple e-mail alert.
Many thanks
Paul

Hi Paul, it should be a nice & easy one for them. A couple of gotcha's to look out for:
1. Lock codes - unless you really want to, don't report on admin lock codes otherwise you could have some fun and games when you have to do a mass lock...
2. Only picking up locked ID's that were locked since the last run. A few years back we had a program coded and the developer forgot this. As a result we kept on getting lists of locked users that had been reported but had not requested their ID's to be unlocked yet.
3. Being careful with the period of the report - can be a pain to keep getting stuff in your inbox unless it is really mission critical and you want to spend loads of time chasing users about.

E-Mail Alerts, Change SMTP Port

I'm trying to set up e-mail alert notifications in Enterprise Manager. I have port 25 heavily used elsewhere, and I beleive this is preventing connection. I cannot conect to port 25 with the telnet test, but I can cannot to port 23. How do I change ports?
Oracle Database 10.2.0.4

The front end application (SmarTeam PDM) is using port 25 for it's workflow. I havn't tested yet with that service off. I'm just wondering why that server can connect to to SMTP, but the Oracle server cannot?HELP!
I am easily confused.
Please clarify how many different systems are involved in this discussion, by providing actual hostname & description of their function.
Firewall rules can be such that System A is allowed to initiate a connection with System B using port #25
This same firewall could be configured to prevent System B from initiating a connection on port #25 with System A.
Please clarify the originating system, the terminating system & the port being used/attempted.
I still suspect internal Firewall rules are getting in your way

E-mail alerts - how do I?

Hi,
I'm wanting to send out an e-mail alert for one of my iCal events. It is something I think will be very useful to do automatically. The docs are so limited, I'm wondering if iCal is as limited as what's listed when searching help.
I'm just starting to get into iCal and hope it can make my scheduling complete.
1) I want to know how to get the program to know my address. My own info is already in my address book but it says I need to add myself there. Confusing how to set that up.
2) How to have an e-mail alert sent to people through e-mail to get their work to me by a certain date -- a reminder to them.
If iCal does NOT do these things, I would appreciate knowing so I could look to other applications to handle these actions. And suggestions for that would be very welcome as well.
Thanks!
Still on Tiger with iCal Version 2.0.5 (1069)

1) go to Address Book, select your contact card, make sure you have the right info there, and make sure the first email listed is the one you would like people to use when accepting your invitations from ical, then while your contact card is still selected go to card>make this my card, which will make your card "my card" so that ical knows which card is yours and which email to use.
2) in ical, double click on a day in week view, this will create a new event, then double click on that new event, this will bring you in edit mode so you can start adding info to that new event. you will notice an attendee field, add the attendees there - they should all be entered as contacts in your Address Book so it is easier to add them to an event, rather than adding manually every time, make sure you enter data in all the other fields. in the note field i would suggest you add info telling the attendees when to get their work back to you or by which date... then when done editing click the done button, the event will exit edit mode and an email will be sent to all the attendees. additionally, you will notice that an alarm can be set, so set up an alarm as an email and address it to one of your emails, minutes/hours/days before the event, that way an email will be sent to you reminding you of the event. once you receive this reminder in your inbox, you can forward that email to the attendees. to make it easy to forward to your attendees, i would create a group in your Address Book and add all the attendees to that group - file>new group, name the group then save and then drag and drop each attendee card to that group - so that way when forwarding, in the to field of the email you will just select the group and click send.
hope this helps

E-mail Alerts have stopped

Something has happened on our server and we are no longer receiving e-mail alerts of any kind. Can someone point me in a direction so I can let the IT consultant fix the issue? Thank You

Hi Jim,
Start with checking the services to see if tyhe SBO mailer is running. If yes check the definition of the alerts so that they are still defined to send email. ALso chech the outbox in B1 to see if there are mails not sent.
Further, check with your IT guys that the name or IP of the SMTP server has not changed.
I hope it helps,
Jesper

E-Mail Alerts / Forum

Similar Messages

Maybe you are looking for