E-mail not outgoing, and intermitely E-Mail access

Greetings Apple Discussions:
I have my OSX firewall off, Verizon DSL westell 2200 modem, and a Linksys wired router-that has a firewall. A few days ago I reconfigured the router through an IBM laptop with NetSet software from Linksys.
Regular internet pages open fast. I may be able to log on to Yahoo.com mail, etc. and once I read a message I can no longer get access to my InBox. This also happens when I try to submit forms for services, etc.
When I try to send an email, this is the message I get:
Cannot send message using the server
outgoing.verizon.net
The server response was: 4.4.2 Timeout while waiting for command.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: Aubrey Muhammad <[email protected]>
Then when I try it again I get this message:
This message could not be delivered and will remain in your Outbox until it can be delivered.
The sender address [email protected] was rejected by the server.
I would appreciate if any one would help me with this issue.
Aubrey

Corrective Measures taken after advice from admins.

Similar Messages

  • Windows 2008- Account Lock not working and getting Domain Policy access denied

    Hi
    Windows 2008 Root Domain we tried to Edit the policy and we were getting the error "Access Denied on the Domain Policy template" we resolved by giving Write permission for authenticated user on the Template. later we applied account lock out policy.
    but it is not applying and automatically reset to 0 in account lockout tool.
    Error:"Access Denied:\\sysvol\Domain.com\policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Windows NT\SecEdit\GPTmpl.inf.Make sure that you have the right permission to this object.

    Hi,
    The error message is Access Denied, so it should be a permission issue.
    You mentioned that you tested the account lockout in isolated network, it was working fine without any problem, by which did you mean that you didn’t get the Access Denied error message, or account wasn’t lockout out?
    If you are facing account lockout problem, here are some troubleshooting articles below for you:
    Troubleshooting Account Lockout
    http://technet.microsoft.com/en-us/library/cc773155(v=WS.10).aspx
    Troubleshooting account lockout the PSS way
    http://blogs.technet.com/b/instan/archive/2009/09/01/troubleshooting-account-lockout-the-pss-way.aspx
    Appendix Two: Gathering Information to Troubleshoot Account Lockout Issues
    http://technet.microsoft.com/en-us/library/cc778156(v=WS.10).aspx
    Best Regards,
    Amy

  • CUCM 8.6.1.2000 - Call History not logging, and no ring tone access.

    Hello,
    A little background:
    Recently, I setup a UCS C-210 M2 with CUCM 8.6.1 and restored our Pub and Sub to it. Also migrated to from physical Unity to Virtual CUC, same with Presence.
    I've also setup a 2nd CUCM Sub, as well as new CUC and CUP subs on a second UCS C210. I also upgraded CUP to 8.6.4. before adding the Sub CUP node.
    I'm thinking my problems began when I added the 2nd Subscriber CUCM node on our 2nd C210. Here is a description of what's going on.
    -  I cannot change ring tones on an IP phone. I get "Ring List Unavailable" when I try to change a ring tone. I noticed that my phone had changed over to the CTU ring tone around the time I brought up the VM environment. The CTU ring tone was a custom one I had loaded at one time.
    - I cannot access any call history on my IP phone. My Jabber client logs call history just fine.
    Seems to be a TFTP issue, but I restarted the Cisco TFTP service yesterday, and it did not help. I also reset the Device Pool, which didn't seem to do anything.
    Also, I'm still a bit unclear on which services I should be running on my new Subscriber node.
    Any help is very much appreciated. Thanks again, guys!!
    -Jonathan

    I had this issue and resolved it. The problem was that we had changed DHCP servers over to a different platform and the new DHCP server didn't have Option 66 defined to point the phones to a TFTP server. Once we re-specified the TFTP server IP's for option 66 in DHCP and reboot the phones the issue was resolved.

  • Bookmark button not working and spinning ball when accessing Japanese sites

    I started getting this problem since I updated to 10.5.2. I even removed all the bookmarks and still Safari won't let me access my bookmarks (spinning ball). I also cannot access many of Japanese urls where Firefox can -- it would start to load the page and half way through I get the spinning ball. I tried repairing permission, trashing cache. I'm not sure what else I can do. Can someone help?
    Thank you!

    Problem solved! The cause was Linotype FontExplorer X v. 1.2.2 which launched at startup. Update to 1.2.3 fixed my Safari problem.

  • I have entered my password but it is saying not recognised and now I cannot access my ipod! Help please

    I turned my Ipod touch on and it asked me for my password which I entered but it is saying it is the wrong password - I always use the same.  I now cannot access my ipod.  Not sure what to do??

    I'm sorry but the only way to enter your iPod again Is to restore it to factory settings. go to iTunes and click on your iPod then click the Restore button. This will restore your iPod to factory settings. So back up your Music, Videos, and purchases before restoring. This will work trust me

  • My unlock bar does not scroll and I can't access/use my Iphone G3

    I cannot unlock my iPhone  in order to use it, the slide bar does not move, can someone then tell me what I should do?
    Thanks

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • TS1702 Discover by cooliris not wrking, and wsj no longer accessed need "ios 4.3".

    Cannot make disover by cooliris work?
    Wsj no longer accesible. Need ios4.3. How do I get it?

    You can only update to the most recent version which is iOS 5.1.1. Here are the instructions.
    http://support.apple.com/kb/HT4972
    Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update

  • Yahoo Mail access in Leopard Mail?

    According to the Apple web site, I'm supposed to be able to access Yahoo mail from Mail.app. Yet when I try to configure a Yahoo account, all I get is an error message that says, "Trying to log into mail server 'pop.mail.yahoo.com' failed. This server may require an additional fee for POP access. For more information, visit Yahoo! Help (link)."
    There are several things wrong with this message:
    1) That it's coming up at all.
    2) That it's implying that I want POP access, when what I really want is IMAP access.
    3) The link to Yahoo! Help does nothing when I click on it.
    Anybody having similar problems trying to get this to work?
    Thanks.

    For well over a year it has been necessary to subscribe to Yahoo Plus if you want to download POP3 mail. So far as I am aware, Yahoo does not offer IMAP4. When you create a Yahoo account in Mail you should see a Yahoo Inbox in Mailboxes but you will not see a separate YAHOO tab because it is not IMAP4 and you can't access a folder list from the server.
    The cost of Yahoo Plus is reasonable (I think I paid about $15 or so for a year's subscription). And, unless I'm mistaken, you also have to pay Hotmail if you want to download http mail from their servers (but this doesn't work with Leopard at the moment because we're waiting for a new Hotmail bundle).

  • Camera icon is not showing and mobile gets overheated quickly

    The camera icon is not showing And I can't access camera and the device overheating quickly

    You could simply access the camera by pressing and holding the camera dedicated key which is placed at the bottom of all other bottons.  Was your device every exposed to water? That could also be a reason of heating up. But if no , then you should turn off your device and wait about 10-15 minutes. After that power on your device and change the screen brightness to automatic or lower the brightness . You could also turn off Auto-sunc Data , location NFC , bluetooth. I know that playing boom beach with maximum screen brightness will really heat up your device but i never had a situation where my camera get's closed beucause of the heat. I had warnings that the device is getting warmer . If its possible press dont show again and OK and if the message gets closed you should be able to take some pictures. 

  • Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
    This may help use diagnose this issue and your other thread's printer issues.
    Thank you,
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • HT1222 I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!!!!!!

    I just installed this update and now I cannot access "Mail" at all.  I tried reinstalling the program, but that does not work, either.  Help!

    Paldeng, thanks for the suggestion.  I've done all that.  I can connect to the server, but apparently they are not recognizing my ID and password.  I can use the server program if I don't go through Mail (using the same ID and password).  My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do.  His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume).  We can receive email in Mail, we just cannot send.
    I contacted my service provider, and we went over my connections.  They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired.  Apple swears it is not their problem, it is the provider, so here I sit.  My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely.  The thing is, we had not messed with any of those settings, so what changed?  I just did not want to bother my son again, as he has many other demands on his time.
    Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard.  I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update.  Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

  • I cannot not send and receive e-mails

    Translated with the help of Google Translate.
    Mail: Version 7.3 (1878.6)
    Two-step verification set
    Since a number of weeks I cannot not send and receive e-mails.
    And I cannot find an answer in the support community.
    I suppose the cause can be found in the two-step verification or in the TLS certificate ... but in this I am a layman.
    The connection wizard explanes:
    iCloud IMAP Failed to log on this iCloud IMAP account. Make sure the username and password are correct
    SMTP Failed to log on this SMTP account. Make sure the username and password are correct.
    I'm 99.999% sure that the username and password are correct. Those missing 0.001% can be found in another problem somewhere else. Who advises me?
    My settings are as follows:
    [Account Information]
    iCloud IMAP
    E-mail: [email address] @ me.com
    Incoming mail server: imap.mail.me.com
    username: [email address] @ me.com
    password: my iCloud account {four digits, a hyphen, five Uppercase, 1 lowercase}
    server name outgoing e-mail: smtp.mail.me.com
    TLS certificate
    [Outgoing mail server / Edit SMTP Server List / account information]
    Server Name: smtp.mail.me.com
    TLS certificate
    [Outgoing mail server / Edit SMTP Server List / advanced]
    custom port: 587
    Use SSL: yes
    Authentication: Password
    username: [email address] @ me.com
    password: that of my iCloud account
    [Advanced]
    IMAP path prefix: left blank
    Port: 993
    Use SSL: yes
    Authentication: Password
    Use IDLE command: checked.
    I hope I get soon an answer.
    iMac (27-inch Mid 2010), OS X Mavericks (10.9.5), Mail

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

    If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

    OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

  • TS2834 I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps saying "Mail cannot open because of a problem" and something about not being compatible ??? Help! I miss my mail

    I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My mail will not open and will not let me quit it. Help?

    My mail will not open and will not let me quit it. Ive tried to restart my computer but it wont let me do that because it says the Mail has canceled the restart. It does the same thing when I try to shut it down. Can someone help?

    Welcome to Apple Support Communities
    Press Alt, Command and Esc keys, select Mail and force close it. Finally, restart or turn off your computer

Maybe you are looking for