E2 powering up issues

Hello All,
I am in need of some help. I have had my E2 for years and have no issues with it until today. I have plugged it in to charge it since it wouldn't turn on and it still isn't turning on. I have tried doing a soft reset while it was charging and that doesn't work. I am needing some advice on what to do. If the only thing would be to buy a new battery I will but will I loose all of my information.
Thanks for the help!
Kiminanakaka
Post relates to: Tungsten E2

Hello kiminanakaka, Welcome to the HPalm Support Community.
This issue has been reported before.  Check out this post:
http://forums.palm.com/t5/Palm-OS-WinMo-Hardware/Is-your-E2-failing-to-Power-On/m-p/125094#M26847
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Y2-13 powering up issues

    Sometimes when I disconnect my tablet from the charger, it needs 5 or 10 presses on the power key until it reacts, then it reboots. Sometimes the white LED keeps oscillating for a couple of minutes after tablet is disconnected from charger (all other LED indication functions are off). Sometimes after disconnection from charger, tablets reboots, then it shows message "ContactManager has stopped working" repeatedly and repeatedly, and I can't do anything with it until I force reboot it again by long press on power key.
    And sometimes I disconnect it from the charger and it works normally; but more often than not, there is some issue with it.
    Can I expect any of the issues to be fixed in any reasonable timeframe?

    There are several other threads of people who have this issue.  Take a look and you will find the Number to call for support as well as Lenovos email address.   The fix they reccomended was a factory reset.  Since I did it, i've not had any issues w/ the Tablet powering off and needed a Long Press to power back up again.

  • Macbook Pro Powering On Issue

    This morning none of the applications on my mac were responding and I had to force shutdown. When i tried to turn it back on it is just stuck on the loading screen with the little gray circle spinning at the bottom. I've tried the SMC reset by holding shift-command-control and the power button but it didnt seem to work. Is there anything else I can do?

    If you do have a GPU issue with your MBP here is the Apple support article concening the problem and several discussions on the subject which are easy to access on the Apple Support Community discussions. 
    http://support.apple.com/kb/ts2377
    https://discussions.apple.com/message/17375478#17375478
    https://discussions.apple.com/message/22506366#22506366
    https://discussions.apple.com/message/20542178#20542178
    https://discussions.apple.com/message/18401539#18401539
    https://discussions.apple.com/message/19346054#19346054
    Naturally there are many more bur they essentially say the same thing.
    Ciao.

  • Powering On Issues with DROID X

    Moved for greater exposure

    Did you take the Battery out whikle it was powered up at the red eye??  Try that first ... and leave battery out for like 2 mins. Try again.
    If that doesn't work, see if you can boot it into SAFE MODE
    - Power Off
    - Press & Hold the Menu button (far left)
    - Power up the phone - but continue to hold MENU button down for 1-2 mins
    If you get past the red eye, it should say SAFE MODE in lower left corner.
    If that works, power it off and back on as ususal and see what happens.

  • GX620 powering up issue.

    Hey so my issue at hand is my gx620 turns on when I press the power button, nothing shows on the screen, the power light stays on for a few seconds  then it turns off with a sort of "click" noise. Then a few seconds later it turns back on but nothing is displayed on the screen. At first I opened the back and noticed that the CPU and GPU were pretty hot so I put on thermal paste. This did not solve the issue at all. Any ideas as to what this problem could be?

    Quote from: chenying on 20-December-12, 04:56:31
    Is there any way to determine the issue with the laptop? I would like to salvage it if possible.
    answer is: not that easily.
    unless you have the professional testing hardware you cannot do that testing and Another way would be to simply swap the existing processor, graphics card, etc with similar ones which this way you could narrow out your test result.
    Is your system is under warranty, if so, try sending it for repair. Even if it is not, the repair cost would not be more than the cost of the new laptop itself, unless it is really really old.

  • Powering off issues

    even after a factory reset the devise would not power off... than was told it woould cost 255.00 to fix an issue that it was corroded. when device was never in contact with liquid or moisture.   I am not a happy camper with Apple Products

    Apple Products are very likely to come into contact with moisture while camping, which will certainly result in corrosion.

  • Powering up issue

    Have a brand new MacBook
    New to Macs in general and I've noticed something strange:
    Sometimes when my Mac goes to sleep, it will usually come back up with the touch of a button... now other times when its off or in "sleep" mode, it stays off even when I try to bring it back up and when I hit the power button, it seems like it starts when the LED lights up but with no display and seconds later shuts off completely... I know the battery isn't dead, but when I take the battery out and put it back in, sometimes even doing the 5-second hold power button in for the power management, it comes back on fine, any suggestions to help me out?? Thank you

    kc_smurf,
    this is a symptom of the sudden shutdown issue others have reported (including myself-i had the exact same problem) Eventually, even holding the power button down for 5 seconds will not work. My advice is to back up your important data, and take it in for repair.

  • C5580 Powerering On Issues

    HP expert,
    I have a question associated with my C5580 all in one.  I am using Windows 7 Home (64 bit). Thank you in advance for your assistance. 
    1. My c5580 never turns on properly.  Generally i receive an error code (b8000198).  Howevever, often it will also either freeze in the 'turn on mode' as in I see the HP logo on the read-out but it never gets to the main menu (that lists the options such as copy, photo, scan, and reprints).  I generally finally get it to "boot" propererly after unplugging the cord from the back of the device, unplugging the brick and unplugging the power supply to the wall.  If I do this 2-3 times it generally boots to the main menu and eventually works fine.  However, sometimes it will being flashing multiple lights (the orange one to the right of the "OK" button, print photos and red eye removal lights and the power on/off lights).  Again, if I unplug and reconnect several times I generally get it to work.  
    Note, this is a used printer.  I read that I should verify I have the correct power supply (as in the same number on the power brick that is also listed in the instructions).  I downloaded the instructions and I cannot find any mention of the power supply number.

    Hi I hope you are donig well and sorry that you are facing this issue;
    If you are still experience this issue I will do my best to assist you.
    update the printers  firmware Go here to get latest for your Operating system.  
    Please can you run this utility GO HERE  please share any mistakes that the utility identifies.
    If you are not experiencing this issue any longer you may disregard this post, although I will appreciate if you can take I little bit of your time and let me know.
    Hope that I can be of help!
    RobertoR
    remember↓↓↓
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Powering down issue

    I recently had to reinstall Windows XP Home on my computer due to a corruption error message that came up as it posted.  The computer works fine but it has begun to restart after the shutdown from Windows.  When I click on "Shut down," it logs me off, saves settings and then shuts off the system, which then restarts after two or three seconds.  Hitting the power button will shut it off, but I don't understand why it's doing this now, since it was never happened before the reinstall.  I already unchecked the "automatic restart" in the Restore folder.  Could it be a BIOS problem, since there have been several updates.  I don't know if the motherboard is even involved here.  I appreciate any advice.

    Checkout the properties of your network driver.
    There is a setting in there to make the system awake on network-traffic, turn that off and the system should stay off after shutdown.
    This is not a BIOS matter but a networkcard setting in Windows.
    Something like the picture below.

  • Thinkpad T530 powering up issue

    I have a T530 Thinkpad.  When I turned it on this morning, the lights came on and then went out again, right away.  I have been trying it off and on many times.  I even took the battery out for a while and tried to no avail!
    Thanks to whomever can shed light on this!

    You may have a similar problem I do with my T430.
    My Solution Center just updated itself and it seems that they put back an old bug from last year where it does not recognise some of the smaller power cords.  As a result, it simply refuses to accept power from these cords.  In order for it to charge, I have to trick it by putting it in airplane mode: this way it is expecting a weaker charge.
    Something similar may have happened to your T530 and, if you failed to notice it, resulted in your battery completely discharging.   Maybe you could take the battery to a store, or a friend with a similar computer, to see if they can charge it for you so that you can open your computer and put it in airplane mode while Lenovo fixes the problem.
    Hope this helps.

  • MOVED: [powering on issues]Need Help Asap

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=137947.0

    Quote from: ihatetn931 on 01-May-10, 04:15:00
    I have tried 2 diffrent Power supplys and it still did the same thing, I also tried that PSU in another computer and it worked fine so i don't belive it's the PSU
    Weird then...
    Quote
    It turns on for about 3-5 seconds then shuts it self off. The time it is on it dosen't show a post screen.
    Have you done >>Clear CMOS Guide<< with power cord removed?
    Have you re seated the CPU and CPU Heatsink [apply new thermal paste, remove any dust if there is any, and ensure that they are properly installed]

  • MBP Powering down issue

    My MBP has been shutting down recently and I don't seem to be the only one having the problem. Here is what I have noticed.
    My laptop is plugged in but it seems to be running off of battery. The charging Icon say that the battery is not charging and I can see that the % of battery is diminishing even tho I have the computer plugged in. When I close my laptop the battery will then charge until I start using it again.
    when the battery gets to 17% or less the screen begins to flicker and odd noise accompanies the flicker before shutting down. I than have to wait until the battery charges before I can restart.
    I have taken the battery out but the computer will not stay on. I have noticed that when the battery is out and I restart the computer will begin to boot up but as I when the computer finally boots (I see the administrator screen) it Immediately shuts down. It shuts down at the same point.
    I have notice that the area where the power adaptor plugs in is getting quite warm and at first I thought it was an overheating problem but I now have a small fan that keeps it cool and it continues to shut down.
    Any suggestions are very helpful. I am not very computer wise so please keep answers simple

    Welcome to Apple Discussions!
    You might try resetting the SMC:
    http://support.apple.com/kb/HT1411?viewlocale=en_US
    Good luck!

  • How to fix/control Purchase Order value as per delegation of powers?

    Can you please let me know the config steps required to fix a certain amount in a purchase order ( I mean to say one designated General Manager Purchase has got delegation of powers to issue purchase order for an amount of Rs. 10 lacs only). Is it possible in MM or in FI  to fix that amount of Rs.10 Lacs while creating Purchase Order  Kindly provide config steps in detail if available in MM or in FI?

    Three levels of release procedures have been configured in our company from purchase officer to finance and from there to the next higher level but not included any value/amount validation is included.   Is there any other option other than release procedure since I think meddling with the release procedure which is already working fine does not sound proper by our MM guys.

  • Incompetent CS ignores you, lock your call/case or sends defective parts : What should i do?!

    Hello. I live in France and the Lenovo CS (same line for all europe i guess) has always been poor in terms of communication (title says incompetent but autistic would be a better word for the case..). Apparently i'm far from being the only one feeling so, but now it reached another level :
    Since the begining i had my Thinkpad, it had many strange powering related issues, many. They often told me i could have the motherboard replaced, but i refused cause i didn't felt safe with it. Now that warranty was coming to an end, i thought about it and was like "come on, let's go for it" even though i still didn't felt safe about it..
    I also had trouble with the fan making strange noise at times. They actually sent a fan to me a year ago but it wasn't the right FRU, i just let go on that at this time. Now, since i was going to get the motherboard replaced (they agreed) i told them to please send back the fan, reminding them it was supposed to be changed.
    As said i do not feel safe when someone has to tear appart my unit, i'd rather do it myself. So i said, please change the parts all at once. That's when it got complicated. They refused to change the fan. Even though i sent them back their automatic mail showing that part was sent back in time (that's what they asked). From there it was just hell :
    [Just so you know, i have Day+1 on site warranty] Not only they ignored mails but also tried shortening the call, telling me to "keep calm and wait" in a very rude way. From there, since emails were ignored, i called back from time to time, only to get repeated "WAIT" with no communication possible and calls most often hanging in the end.
    The last person i had, being nicer, told me they had a problem in their system and couldn't communicate with the tech guys. But her speech became unclear and it appeared clearly it was bull**bleep**. She also surprisingly told me the fan was now included in the repair..!
    At that point it's been more than a week of waiting, i asked around if somebody by chance would have an IBM tech phone number (since they're the people doing the repair). Someone kindly sent me one and it worked. I called him next day and he answered.
    Talking to the IBM tech, he first told me they had absolutely no communication issue and after looking at my case/call, immediatly mentionned it was locked. He wrote something to IBM and told me to call him back the next day. So i did and since nothing changed, he kindly did what the CS is supposed to do, he set and appointment.
    A tech came next day (that's what Day+1 is supposed to be). Guess what? They sent wrong fan again. Hard to believe it's a mistake again. Anyways, the motherboard replacement took place without much trouble. I then waited for the tech to come back with the fan. But the CS is still being what it is :
    Just before the tech came for the MB replacement, i called CS just to make sure they know what's going on. The lady said "great, hope all works for you after!" so i thought hell's over. But after the tech did his work and left, having a little issue (now resolved) i called back CS and this time the lady was again like "WAIT" she didn't even know the tech came!
    You never know when if they're lying. But i guess they do a lot. After the MB was replaced, i noticed trackpad/touchpad had issues. But that quickly came back. I also noticed the GPU was overheating (temps were already high before). The new fan was making more annoying noise. I just asked them to change it. But no, their super IT decided to change the CPU..
    I told them over and over it was the GPU overheating, not CPU. But they insisted; Tech came with new CPU which WASN'T brand new (it's supposed to be). It was refurbished.. Wait, it said "certified reutilized" no idea what that means..? Unfortunatly the issue with ultranav came back and this time stayed dead, the fingerprint was also dead. So the tech came back.. Whilh testing, he did reset the bios, which sets graphics to optimus. I always use discrete only.
    That's when we discovered a new issue : the integrated graphic is totally defective, screen flash on/off every 5sec or so and then system freeze..! So in the end, ALL parts they replaced were having much worse trouble then original one! And replacing the CPU for a defective one may be intentional.. Since the warranty end, they may think i'll buy a new one after this one dies.. Sorry but you're wrong!
    What the hell Lenovo, you can't even communicate with your collegues..? It's shocking when the IBM tech talk to them, it's like they don't believe what he says. Or don't understand.. Since their level is SO LOW. My warranty now got only 10 days remaining.
    I don't know if/when they're going to decide to do something. They now regularly ask me to send back the whole unit to them. No way, i won't do that. Thinkpads are great but warranty is crap, be careful when buying expensive on site extensions.
    As you know, parts are guaranteed 3 months after they get changed, even your warranty ends before. But seeing how they act, I'm now very worried, it seems i can only rely to the IBM tech, which unfortunatly have no power/rights here.
    I know there are some Lenovo staff here, hope they'd say a word. Even though i'm in Europe, this is global lenovo forum... There is apparently NOT A SINGLE WAY to complain to a higher level in this company.

    Julien,
    Thanks - we have escalated your case to our regional customer relations team and I have confidence that they will be able to help you bring this regrettable saga to a positive resolution.
    I understand your concern on the timing of this.
    Best regards, 
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Any idea what unknown error 2005 is?

    My iphone is bricked after trying to update to 2.01 and I'm getting the same error on my attempts to restore that I was getting on my Touch update.
    I tried to update and there was a failure, when I try to restore, it extracts the software and starts the preparing iphone for restore when I get the unknown error 2005.
    My usb cable is plugged into one of the 3 ports on the back of my Mac Pro, so it's not a powered USB issue. I removed and reinstalled itunes with no luck.
    I eventually got my touch updated by using another computer, but this is not a long term solution to this problem so it'd be great if anyone else has seen this error and knows how to fix it.

    done all that.
    I always use the original usb cable, plugged either into the front or the rear of the mac pro.
    I've created a new account and tried that, no joy.
    I've reinstalled itunes with no luck
    my only other thought is that it might network related. My mac is connected to a switch, then to my router. I'm upgrading everything to gigabit next month and trying to get rid of the switch, so maybe that will take care of the problem.
    It's just annoying to have a code assigned to an 'unknown' error!

Maybe you are looking for