EA2 - 'No Valid Query' message when pressing F4 (describe) on objects

I am having a problem when pressing F4 on an object. In the SQL window I highlight a table, package etc and press F4 to describe the object. Before the description is displayed a blank message window appears with the title 'No Valid Query'. This can pop up several times before success. I am running this on Windows XP SP2 and oracle database 10.2.0.3.

We had a bug logged for this issue. It has been fixed in EA3 (under development).
-Raghu

Similar Messages

Problem when pressing ENTER for InputText object text

Hi,
I encountered a very strane anomly when pressing ENTER for
InputText object text.
1) I set the InputText object for having maxium 2 characters.
2) I set the InputText object for getting only numbers using
.restrict= "0-9";
Now, say the InputText is now empty.
1) Say I press the number "7" - the text line is now
containing - "7".
2) Now, I press ENTER - the "7" is cleared from the text
line.
Now, while the text box is clear, we think that we can insert
2 numbers.. but not!
3) I press a number, say "9" - the line contains "9"
4) I try to insert another number... but I can't!!
In order to be able to insert two numbers, I have to press
twice the Backspace in order to clear the "9" , and another ghost
note (the ENTER?).
How can I solve this anomaly?
Thanks
Yossi

Thank you very much! it works.
(Those tiny anomalies are so annoying, that it is so great
feeling to have them solved, thanks)

"Multiple Validation errors" message when creating new project in FCPX

As a test I have now managed to change the file format from older quicktime file to .m4v and import into FCPX. I had to use Handbrake to change the file format to .m4v. If a free software can do this then why can't the $300 FCPX - and allow me to import directly? This would save me MANY hours of extra work!
But then, when I try and edit this - first trying to create a new project I get the message "Multiple validation errors occurred" The same message even if I try and custon settings rather than use the default
Does this mean that after all the work and hours it took me to tarnscode the file format, import and then render etc - I will be unable to use FCPX - to edit this footage?

Update on trying to create a new project - and getting "Multiple Validation errors" message
I quit FCPX and tried to use iMovie to make a clip to send to you. Decided against this - and so I opened FCPX again
To my surprise there were now over ten projects - as every attempy had appeared! This is bizarre - why did they not show up when I tried to create them first?
So, I had to delet most and just use one. This appears to be working as a project and is allowing me to edit clips into it.
It will be a reall bummer though if I have to do this every time I need to create a new project!

Trigg the 'Query' button when pressing 'Enter' on the keyboard

I have a form with 2 buttons, 'query' and 'reset'.
I would like that the 'query' button is triggerd (pressed) when the user presses 'Enter' on the keyboard. In regular html I think this is accomplished if the button is a 'submit' rather than a 'button' type, but I haven`t found a way to edit the
type of button in Portal.
Users belive it`s very annoying to have to move the mouse over the 'query' button to execute the query, and would rather like to just press 'Enter'.
I`ve tried to use a javascript (onKeyPress), but if you make a javascript in Portal, you`re not allowed to add this to your button, only as an 'form-' or 'field validation' in a textbox.
Is there anyone who knows a way to get this functionality?
Regards,
Orjan

One of the AVG add-ons for Firefox has been reported to cause that to happen. Disable that add-on until AVG fixes it.

"Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

Is anyone else getting this error message, "Entitlements are not valid", when trying to sync .ipa file from iTunes to iPad?
The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
So, I have a swf file that works and was able to publish it into the Android Market. I then compiled and build the same flash project with the Packager for Iphone into an .ipa file. But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message.
I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
Any help would be appreciated. thank you.

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

My ipad appears to be locked - icloud message. when pressed ok it wont go away

my ipadhae thi message on " icloud backup this ipad hasn't been backed up in 3 weeks. backps happen when ths ipdis pdin, lckd, and connected to wi-fi" pressed th ok button but it didn't work. conneced it to an outlet didn't work. i'm always connected to wifi. tried toswitch it off bu it wont work as the messag is blocking everyting. doesanyon knewhow to fix this?

Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

Key not valid error message when trying to download software

i cant download software for my envy 5532 keep getting error message ( key not valid for use in specified state ).
This question was solved.
View Solution.

This problem is related to Microsoft Update KB2918614
The fix is to remove this update.
How to remove a Windows Update in Vista
If the fix works I recommend that you 'hide' it so that it doesn't get reinstalled automatically.
Instructions below:
If you don't want Windows to install an update, you need to hide it.
Open Windows Update by clicking the Start button . In the search box, type Update, and then, in the list of results, click Windows Update.
In the left pane, click Check for updates.
When Windows finds updates for your computer, do one of the following:
Click the link that tells you important updates are available if you have important updates to hide.
Click the link that tells you optional updates are available if you have optional updates to hide.
Right-click the update you don't want to install, and then click Hide update. The next time you check for updates, the update won't be automatically selected or installed. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

QAAWS error message "not a valid query"

Hi,
When I'm trying to connect to QAAWS I get this error message: "not a valid query. FWB 00025".
Does anyone know how to solve this problem?
The server where the BOE is installed on has been restarted a couple of times but it doesn't help.
Universe Designer and WebI work fine.
Thanks!

Is QaaWs running properly on your system?
To validate the installation, open a browser and type the following URL
http://[server]:[port]/dswsbobje, where [server] corresponds to
your web server address and [port] corresponds to the port where you
set up in your web server. The default used by Tomcat is 8080. dswsbobje
is the default name of the Web Service provider web application. Then Validate.

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error message when run a query

I got an error message when I run one of the query on the portal:
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
INFO
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
MSGV1: 1
MSGV2: USITM
MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
What problem is this? How to fix it? Thanks in advance!

Hi Zheng,
Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
Regards,
Anil

Receive message when downloading ITunes or Safari for Windows 7 64 Bit. "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."

Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package".

I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.

Giving error message when saving the Query

Hello,
I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
Error Message:
u201CThis internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
Could any one please suggest me how can I over come with this problem.
Thanks
Prathap.

Hi Prathap,
There is some problem in the definition of the Query.
Please click on the check button before saving the query, it gives where the problem exists in it.
Hope it helps.
Veeerendra.

Screen exit Payment document saved when press enter after error message

Hi All,
I have created a screen enhancement for payment document WZR1.its in additional data tab under header details.
Here i should populate a error message when user save the payment document without entering values to custom screen fields.It works fine with Function exit LWZRE017 . It populated the msg and the screen is disabled but after when i press enter button the document is saved and created.
please let me know how to stop saving the document without entering values in custom fields.
Thanks,
Arun kumaran.
Edited by: Arun Kumaran on Mar 4, 2010 12:09 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:26 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:43 PM

I found the fcode when enter is 'ENT1' it is from standard screen program.
I populated the same message when UCOMM = 'ENT1' still not working.
ARUN KUMARAN.
Edited by: Arun Kumaran on Mar 5, 2010 1:36 PM
Edited by: Arun Kumaran on Mar 5, 2010 2:11 PM

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.

Adobe Acrobat 8.0
standalone version
Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use.

EA2 - 'No Valid Query' message when pressing F4 (describe) on objects

Similar Messages

Maybe you are looking for