EBS/Networker Client savepnpc scripts
I am running Sun Enterprise Backup (aka Legato Networker) 7.1 Business edition. The server is running on a Solaris 9/Sparc machine. The server is also a client. I also have Linux and Polaris clients.
I am trying to get client savepnc scripts (for pre/post commands) working. (this would be to shutdown specific applications while a client was being backed up.) Under /nsr/res, there is a *.res script for each backup group. On the server, template ones were created by default for each group. I modified them to send me an e-mail
type: savepnpc;
#precmd: "echo hello";
precmd: "echo server1 precmd | mail [email protected] ";
#pstcmd: "echo bye", "/bin/sleep 5";
pstcmd: "echo server2 postcmd | mail [email protected] ", "/bin/sleep 5";
timeout: "12:00:00";
abort precmd with group: No;
I created similiar files on the clients.
These scripts are run for the server's "client" instance. (They don't run if the server is not defined as a client in the backup group.) They don't run on the other clients. The log files don't show any indication that there was even an attempt to run them.
Any thoughts?
Thanks
Never mind- I had accidentally typed the "savepnpc" command in the "save operations" field and not the "backup command" field.
Similar Messages
-
Network clients can't log in some days...
but can on others!
Since upgrading to Mavericks and Server 3 I have an issue with local network clients not being able to log in to their accounts some days but can on others (yesterday was fine, today a problem again).
It seems that quite a few people are experiencing similar issues but I can't find a solution I am confident to try out or that replicates my situation.
Before you tart throwing techincal advice at me, I am not a networking expert nor a Mac genius, so please make your explanations clear and simple. Thank you.
I have tried rebooting the server and clients, no success (today - although three days ago that did work);
I have 'unbound' and re bound the clients (which worked four days ago, but not today - they are still showing green light);
I have verified the disk permissions on the server (there were a few errors all bar one are corrected).
Any other (simple) suggestions? Even if it is just things to check and to post more info here to help diagose the problem.
Many thanks in advacne.I'll try to keep this simple, but network troubleshooting sometimes... isn't. This reply will also probably get a little wordy.
There are three parts here...
First, ask the server about its own local network and DNS configuration. Functional networking and proper local DNS being fundamental to how servers work, and how servers can authenticate with your remote clients. To do this, launch Terminal.app from Applications > Utilities and issue the following harmless, non-destructive, diagnostic command — this command will spot most of the issues that can arise with local networking and local DNS:
sudo changeip -checkhostname
The sudo will require entry of an administrative password. There may be a one-time warning displayed about the perils of using sudo. The command will then display some local network configuration output (including the IP address of the server), and finally an indication that either no changes are needed, or that there are network or configuration or DNS errors. If changes are required, post the output. (If you want or need to obfuscate, please do so consistently here, and please switch the domain part of your host names to "example.com", "example.net" or "example.org".)
Second... On the client systems, launch System Preferences via > System Preferences..., select Network, select the network connection (WiFi or Ethernet, most likely) that you are using, then select Advanced..., then select DNS, then confirm that the clients are referencing only the IP address of your local OS X Server or whatever DNS server you are using on your local network, and that your client systems are not referencing any ISP DNS servers, Google DNS servers, nor any other DNS servers that are not on your local network.
Third... Please also describe your network configuration in just a little detail. For instance: are you using an all-wired Ethernet network, or are you using WiFi, or some combination of WiFi and wired networking? Are you using a firewall? Any network switches? Do you have more than one switch?
If you are using WiFi for your connections, are you located in an area where there may be nearby WiFi networks? -
VPN Problem: Can't route to other network clients
Hi,
I can't ping the other clients on the network when I'm connected to VPN from outside.
But accessing internet trough VPN works. (Sending all data through VPN).
So in fact, I can only ping the VPN server I'm connected to.
Maybe someone here has an idea what I'm doing wrong here.
Here is my setup:
internet
I
I
Airport Extreme (internal IP 192.168.3.1, Router with NAT Port forwarding to 192.168.3.3)
I
I
Switch----macMini (192.168.3.3, OS X Server 10.4.10 with VPN, DHCP, DNS, NAT enabled)
l
l
Other Clients on the Network (Clients have DNS entry 192.168.3.3 192.168.3.1, Router is 192.168.3.1)
The services DHCP, DNS working well for internal clients.
Has someone an idea?
Thanks a lot.
Alex
Message was edited by: SyndromeFirst, ping is ICMP traffic, different from other kinds of (eg, TCP) traffic like AFP.
See http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/productstechnote09186a00800a6057.shtml
traceroute also uses some ICMP traffic but might also be using UDP, see
http://en.wikipedia.org/wiki/Traceroute
http://www.linuxplanet.com/linuxplanet/tutorials/6524/1/
However, in testing, I can indeed ping the server, when I connect to a remote Mac OS X Server via the Mac OS X supplied vpn. But there is no AP Extreme in the path. So the two big factors are: limitations and/or configuration of the AP, and firewall settings for each/any machine involved.
The Airport Extreme is really quite limited, compared to any more full-featured routing device - in terms of just how granular you can be with controlling traffic flow.
(As a total aside, I'd recommend investing in something like a Zyxel Zywall 2 Plus (or similar or better) and running the AP in bridge mode for wireless clients.)
When you've connected via VPN, please run
netstat -rn to see what your default gateway is, that's actually being used.
Finally, what led you to try these tests ? What other problems are you having, what primary issue(s) are you trying to solve ? -
Can't copy files to network client's folders
We just switched from ARD 2.0 to ARD 3.0. ARD 3.0 is a great product - if it works. I can only copy files to ARD-clients, if I copy to the local hard disk, i. e. if it is a local client or if it is a network client and I copy to the top level of the volume. But if I copy files to the network client's desktop it doesn't work. I think the reason is that the network client's desktop is located on the server and not on the local hard disk.
The same problem occurs if I use the new feature to copy files from or to a client using drag-and-drop with the observe window. It works with the client's local hard disk, but not with folders located on the server. This time there is no error message, but the message "waiting" - and the waiting never terminates.
Has anybody a helping idea? Thanks!
Greetings from the country of the football (soccer!) world cup!
HorstI had the same problem, but I managed to fix it.
In WGM check that the sharepoint of your users Home Folder is set to owner root with Read and Write permissions.
I also created an ard_admin group in WGM and enabled open directory management on the client Macs. (Page 62 of the ARD admin Guide.) -
Can we access popularity trends using client side script?
Hi,
I have a requirement to show the hit count for my image library's item(s). When ever I am opening an image from the image library, I just wanted to show the hit counts. For this I have created a Number column and updating this column by using CSOM
when ever hit happens to that particular item.
The problem arises here, for visitors ( who has read only permission to the site) I am not able to update the column due to permission issue. Since we all know that we can't elevate the privilege from client side script. And also our design says that we
can't give the contribute permission to all the users at the library level. How can we update the count at item level even when the visitors are opening an item from the image library?
Please help me...
Thanks in advance
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer972454 wrote:
can we access 11gr2 oracle using 11g r1 OWB Client? NO .. Oracle 11gR2 db is accessible only from OWB11gR2 client
we have 11g r1 database installed on our machine, and 11g r2 OWB client on other machine.
Please help. we are unable to connect.
Sorry this is different from your 1st question.
For your information OWB11gR2 client can access 11g r1 database
Regards
Gaurav -
Does URL Services support client side script?
My ASP page it built as a portlet, and displays fine but it
won't submit. When I view the Source in my browser, Portal
didn't include any of my client side vbscript script, then html
is there but everything else is missing....
Question: Does URLServices support client-side VBScript?
I am using some vbscript for validation purposes and then
using the document.ChangePassword.submit() to submit the
form.
If URLServices doesn't support it, then URLServices is totally
useless... Everyone uses some kind of client-side script to
validate the form!Hi Rea,
Per my understanding you want to know some information about using the Visual Studio to do the debugging, right?
Example, If you want to debug a customized extension for SQL Server Reporting Services(SSRS) in Visual Studio, you can attach the process to ReportingSerivcesService. We need to check the items "Show processes from all users" and "Show
processes in all sessions" to show the "ReportingSerivcesService. exe" process.
Additionally, please make sure the customized extension is invoked in the Reporting Services(make sure all configurations is set correctly), otherwise we won't be able to run into the breakpoint. More Details information in this article for your reference:Start
a debugging session for a Store app in Visual Studio (VB, C#, C++ and XAML)
You can also add the debugger keyword in the code, see
Debug JavaScript and jQuery using Visual Studio in Internet Explorer browser
Similar thread below for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-us/df9dfaab-59af-4a85-916c-ef9e11e07071/debug-custom-net-assembly-in-context-of-sql-reporting-server-2008?forum=sqlreportingservices
If you still have any problem, please feel free to ask.
Regards
Vicky Liu -
Connect as sysdba from network(client)
when i connect to oracle database on network (client)
as sysdba then it will gives error
but when same command is issue on server then it will connect to oracle with no error
:-on network machine
SQL> CONNECT SYS/CHANGE_ON_INSTALL@SAFEDB AS SYSDBA
ERROR:
ORA-01031: insufficient privileges
Warning: You are no longer connected to ORACLE.
init.ora file
remote_login_passwordfile EXCLUSIVE
and
SQL> select * from V_$PWFILE_USERS ;
USERNAME SYSDB SYSOP
INTERNAL TRUE TRUE
SYS TRUE TRUE
whats the problem??recreate your passwordfile in order to ensure that it is not shared and try.
Joel P�rez -
Identifying Flash Player versions 10a, 10b and 10c using client side scripting
I need to write a client side script to identify users with 10a, 10b or 10c installed, but I only see version 10 (no letters.) Is there a translation between version keys major/minor/revision, and 10a/10b/10c? I want to use the (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash"))) method in conjuction with the javascript.GetVariable("$version") method, and I need to know what values to check for.
Thanks very much!For your information
Flash10.ocx / FlDbg10.ocx = 10.0.2.54 Shipped with CS4
Flash10a.ocx / FlDbg10a.ocx = 10.0.12.36
Flash10b.ocx / FlDbg10b.ocx = 10.0.22.87
Flash10c.ocx / FlDbg10c.ocx = 10.0.32.18
Flash10d.ocx / FlDbg10d.ocx = 10.0.42.34 -
Unable to set the ip address for hosted network client after creating WIFI hotspot
Original Title: INTERNET CONNECTIVITY PROBLEM WITH MY LAPTOP WIFI HOTSPOT
HI all
I am able to use internet connection from my lap hotspot, when the internet source is Public or private wifi.
so I know the cmd window commands for hotspot and settings of client(sharing to hosted network client, assigning IP address etc.,)
but the problem I am facing is slight different
I am using my cdma wireless broadband datacard as my source internet connection(Reliance netconnect +)
when I try to create hotspot for this, as usual I am able to create the hotspot and able to share the internet to hostednework client.
but I am unable to set the ip address for hosted network client, if I try to set ip 192.169.137.1 and 255.255.255.0
as soon as I close the window, the ip address also disappears
when connect my android phone to that hotspot, it is able to connect but there is no internet connectivity.
when I check the hostednetwork client for packet transmission, both sent and received packet is happening., I mean transmitting
so what cause the failure in internet connectivity but success in hotspot connectivity?
check the screen shots...
can u help me..
its little complicatedHi,
Please make sure the Ad hoc connection IP adress is at the same range with your local connection. In addition, how about recreate the ad hoc connection for test, please have a try.
If problem persists, please use Network troubleshooter in Action Center to fix this problem for test.
Roger Lu
TechNet Community Support -
Hi guys, i'm getting a message from the nokia store that nokia social v1.5 is not available for the nokia e6 belle. has anyone been able to update to that new version??
stephen17033 wrote:
I re-installed belle and also have lost the network client.can not download it from anywhere which is a shame because I thought it was good.
Try here
Here -
Hi all
I am trying to get Network Client Username. All client users have Network Username.
I am would like to read the Username based on their Windows Network login. Using the username, want to validate with Database.
Could you please let me know how to get Network Client username?
Thanks in advance.
KarthikCreating a package is relatively easy, so I think you should just try it to see how far you'll get. sssd doesn't seem to difficult to install, so creating a PKGBUILD should not be to hard. If you encounter any problems, post them here so we can help you out
-
Network Environment diadem list of network client
It is possible to get list of network clients through vbscript in Diadem?
Is accessible in Diadem Navigator network environment?
Thanks,
Yustas
Solved!
Go to Solution.Hi Yustas,
Great, that makes sense now. You can not add a DNS name (\\ComputerName\...) to the list of "grey" folders listed under the "My Computer" node in the tree view of the NAVIGATOR. Any external folders officially mapped by Windows such that they have a drive letter (T: or Z will automatically show up in the list of "grey" folders.
You can add a DNS path to a folder when you create a new "yellow" Search Area under the "Search Areas" node in the tree view of the NAVIGATOR. My recommendation would be to add any folders you want to load data from on these remote computers as Search Areas. This will also give you the ability to look inside those data files without loading them and easily load selected channels, get curve previews, etc.
Ask if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Can I open a recordset On Client Side Script?
Hi Guys,
On a form I have a client side VBscript thet checks the email
addy a user has added into a text box in a form and if its in the
array of values set in the script it gets refused. This works.....
I would like to adapt this a little if possible and make it
so that instead of hardcoding the array values into the script, I
would like to have the array values taken from a recordset because
it will allow the user to add and delete bad domains via a form and
not need to go into the page code to add to the array I have at the
moment.
I have tried serval times to replace my array loop with a
recordset while loop to get the badDomains from the field in the
database but I just get script error on page in my task bar.
Can I open a recordset from a client side script?
Id apprecaiate eny thoughts on how I can do this.
Thanks again
TagHi Envision,
Its actually VBScript im in at the moment...
I have tried to get my client script to run but im still just
not getting it although I dont think im far away, mixing client
side and server side scripts to get this array loaded is still
throwing me a bit !!!!!!
I tried to follow the For loop suggested in JS but did it in
VBS and wondered if anyone could give it a look and point me to my
errors?
I dont like just posting code without being asked as its a
bit presumptious of me but Im not asking anyone to write this for
just point me to my problems hopefully.....
Here is what I have , when the page loads I used DW to make a
recordset for me to open the table with stored bad domains and this
client script is supposed to harness the recordset created server
side by DW and loop through the field and compare whats in the
forms email textbox..
[code]
Sub CheckMail()
Dim sValidationMessage
Dim sEmail
Dim sBadDomains()
Dim nIndex
dim counter
sValidationMessage = ""
sEmail = Document.Form2.email.value
nIndex = 0
counter =<%=(rsGetBadDomains_total)%>
If Not (InStr(1, sEmail, "@") > 0 And InStr(1, sEmail,
".") > 0) Then
sValidationMessage = "You have entered an invalid email
address!"
End If
If Len(sValidationMessage) = 0 Then
For nIndex = 0 to counter
sBadDomains(nIndex) =
<%=(rsGetBadDomains.Fields.Item("sBadDomains").Value)%>
If InStr(1, sEmail, sBadDomains(nIndex)) > 0 Then
sValidationMessage = "You have entered an unsuitable E-Mail
address please use your main ISP E-Mail address"
Exit For
End If
nIndex=nIndex+1
Next
End If
If Len(sValidationMessage) > 0 Then
MsgBox sValidationMessage
document.Form2.email.select
Else
document.Form2.submit()
End If
End Sub
[/code]
Thanks again for all the support so far.
Regards
Tag -
I bought a new airport time capsule 3tb to be used to save to file all my pictures. Can I use it as network client and the airport express as the
Primary base station?To my opinion this looks a bit like what I'm looking for.
At the moment I have an Imac that is wireless connected to a 2TB time capsule (TC1).
To this time capsule I have another 2TB time capsule (TC2) connected via a upt wire connection.
At the moment there is a backup made via time machine from the Imac to the time capsule TC1 (the second TC is not used)
I'm not so technical so I hope you understand the configuration.
What do I want to achieve :
copy all my data from the Imac to TC1 so that the information can be accessed by more users.
create an automatic backup from TC1 to TC2 (mirror or raid system) for security.
give access to some users on the network to access TC1 to read and write data.
TC2 only serves as backup from TC1 and no direct access is needed to this disk.
If there is a solution, thanks for explaining it in 'IT kindergarden style' so that I can understand and use the info.
Many thanks in advance. -
WMS 2012 and Touchscreen Support over Network Clients
Hi all,
I recently setup some virtual machines to operate with Dell Wyse E02 network clients. I purchased touch screen monitors to go with the zero clients, thinking that the E02's USB input would recognize the monitor as a keyboard and mouse. Upon testing the scenario,
I found that the touch screen capabilities do not work.
Is there anyway to configure WMS so that touch screens may be used over virtual desktops & network clients?
Thank you so much in advance for the help!Hi,
For the multipoint server issue, I recommend you can post in the dedicated Forum for more efficient support:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=windowsmultipointserver
In addition, to install Windows MultiPoint Server 2012 Update Rollup 1, you can also download from here:
Windows MultiPoint Server 2012 Update Rollup 1 (KB2791647)
More detailed information about UR1, please refer to this article:
Updating PCs and Virtual Desktops for Update Rollup 1 of Windows Multipoint Server 2012
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Maybe you are looking for
-
I have contacted apple support and followed the steps to uninstall itunes on my laptop, and then reinstalled itunes from the apple website. and when i connect my iphone to my computer it states that it cannot sync due to it not being the 64-bit versi
-
Can't open the download page of Adobe Reader
just can't open that page. every time i open it, it can't connect to the downloading.
-
Problem upgrading from Photoshop CS2 to CS4 Extended
I purchased the retail box Photoshop CS4 Extended Upgrade (Windows) from a retail store ($349.99 + tax). I am upgrading from Photoshop CS2 and this is the version that the Adobe website says to purchase for this upgrade path. The problem is that CS4
-
No wireless on Satellite C660d-14W after clean Win 7 intsallation
Hello, I bought a toshiba satellite c660d-14w off a friend, and reinstalled a clean copy of windows 7 x64. After installing, the laptop didn't recognize any hardware (graphics, sound, wireless network card) so I've been slowly trying to install all t
-
Can anyone tell me why iMessage on my macbook pro stopped working and why it won't allow me to sign in. The apple id and password are definitely correct.