ECC 6.0 with SQL installation in MSCS Envirnoment.

Hi Gurus,
I am installing ECC 6.0 (only ABAP Instance) with MSSQL 2005 in Windows 2003 MSCS Envirnoment.
I have certain question regarding this scenario.
What I have understood by SAP Document is as below.
We have Node A, Node B and SAN.
After MSCS installation and Cluster configuration.
Cluster will contain 3 Groups ( Clustergrp, Sapdbgrp, Sapgrp)
As per my understanding I will do as below.
On Node A:
1. Install MSSQL Client on Virtual name.
2. Install ASCS
3. Install CI.
4. install Database Instance
Question 1. What is to be placed on SAN and what should be placed on local Drives of the Nodes ?
Question 2. Whether MSSQL Client should be installed in both the nodes( NODE A and B), as in standalone installation SQL client is installed in C:\Program Files\Microsoft SQL Server ?
Question 3. Do any other component (like Enqueue replication Server) is must to enable the Node to be able switchover to 2nd Node ?
On Node B:
1. Install Dialog Instance.
All of the above component installation will be done on Virtual name.
Please clear my above doubts and advice if I left out some things.
Thanks in advance.
Regards
Vinay

Hi Darwin,
Thanks for your replies,
I have completed my installation without any error.
I did it as below:
On Node A
1 MSSQL Client on Virtual Name
2 ASCS on SAN
3 SCS on SAN
4 First MSCS Node ( it create a SAP Cluster Group)
5 Database Instance (in SAN on disk that belong to SAPDBGroup)
On Node B
1 Additional MSCS Node
after this bring the SAP Cluster Group online
Now back to NODE A
Installation of Enqueue(2 times) 1 for ASCS and 1 for SCS
Than on Node B
Installation of Enqueue(2 times) 1 for ASCS and 1 for SCS
Now Node A
Make SAP group Online
Install Central Instance
Node B
Install Dialog Instance.
After that you need to restart both the node one at a time so that your server are accessible on Virtual IP.
Now when one node goes off (Like Node A) the user got log off for 3-5 sec and they need to login again, is it normal. Is there any post step to stop this or some cluster configuration need to be done.
Regards
Vinay

Similar Messages

Problem with SQL installation - the specified driver is invalid

Hello,
I'm struggling with the SQL installation. It's failing while trying to install database engine services with the following error:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: Zadaný ovladač není správný.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x476BF04A%400xDC80C325&EvtType=0x476BF04A%400xDC80C325
The error description can be translated as "The specified driver is invalid."
Here is some detailed description of the error:
PerfCounter munging INI tempate: 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\sqlctr.ini' -> 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\perf-MSSQLSERVERsqlctr.ini'
(01) 2014-06-17 16:44:25 Slp: Sco: Attempting to replace string in file, source file 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\sqlctr.ini', output file 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\perf-MSSQLSERVERsqlctr.ini'
(01) 2014-06-17 16:44:25 Slp: PerfCounter calling lodctr: 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\perf-MSSQLSERVERsqlctr.ini'
(01) 2014-06-17 16:44:25 Slp: Prompting user if they want to retry this action due to the following failure:
(01) 2014-06-17 16:44:25 Slp: ----------------------------------------
(01) 2014-06-17 16:44:25 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-06-17 16:44:25 Slp: Inner exceptions are being indented
(01) 2014-06-17 16:44:25 Slp:
(01) 2014-06-17 16:44:25 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
(01) 2014-06-17 16:44:25 Slp: Message:
(01) 2014-06-17 16:44:25 Slp: Zadaný ovladač není správný.
(01) 2014-06-17 16:44:25 Slp:
(01) 2014-06-17 16:44:25 Slp: HResult : 0x84bb0001
(01) 2014-06-17 16:44:25 Slp: FacilityCode : 1211 (4bb)
(01) 2014-06-17 16:44:25 Slp: ErrorCode : 1 (0001)
(01) 2014-06-17 16:44:25 Slp: Data:
(01) 2014-06-17 16:44:25 Slp: WatsonData = perf-MSSQLSERVER-sqlctr11.1.3000.0.dll@OpenSQLPerformanceData@CollectSQLPerformanceData@CloseSQLPerformanceData
(01) 2014-06-17 16:44:25 Slp: DisableRetry = true
(01) 2014-06-17 16:44:25 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-06-17 16:44:25 Slp: Message:
(01) 2014-06-17 16:44:25 Slp: Zadaný ovladač není správný.
(01) 2014-06-17 16:44:25 Slp:
(01) 2014-06-17 16:44:25 Slp: HResult : 0x80004005
(01) 2014-06-17 16:44:25 Slp: Error : 2001
(01) 2014-06-17 16:44:25 Slp: Stack:
(01) 2014-06-17 16:44:25 Slp: at Microsoft.SqlServer.Configuration.Sco.PerformanceCounter.LoadPerformanceCounter(String symbolInstallPath, String counterPrefixServiceName)
(01) 2014-06-17 16:44:25 Slp: at Microsoft.SqlServer.Configuration.Sco.PerformanceCounter.RegisterPerformanceCounterCore(String libraryFileName, String openFunction, String collectionFunction, String closeFunction,
String symbolInstallPath, String counterPrefixServiceName)
(01) 2014-06-17 16:44:25 Slp: at Microsoft.SqlServer.Configuration.Sco.PerformanceCounter.RegisterPerformanceCounter(String libraryFileName, String openFunction, String collectionFunction, String closeFunction,
String symbolInstallPath, String counterPrefixServiceName)
Any advice is appreciated. So far i've come to another posts using lodctr /r but that doesn't fix it.

symbolInstallPath, String counterPrefixServiceName)
(01) 2014-06-17 16:44:25 Slp: at Microsoft.SqlServer.Configuration.Sco.PerformanceCounter.RegisterPerformanceCounterCore(String libraryFileName, String openFunction, String collectionFunction, String closeFunction,
String symbolInstallPath, String counterPrefixServiceName)
(01) 2014-06-17 16:44:25 Slp: at Microsoft.SqlServer.Configuration.Sco.PerformanceCounter.RegisterPerformanceCounter(String libraryFileName, String openFunction, String collectionFunction, String closeFunction,
String symbolInstallPath, String counterPrefixServiceName)
Any advice is appreciated. So far i've come to another posts using lodctr /r but that doesn't fix it.
Hi,
Error seems strange and points to Performance counterexception. Can you manually rebuild performance counter using below Support link
http://support.microsoft.com/kb/300956
After that remove failed installation completely from add remove program and then install a fresh instance. Always make sure account used to install SQL server is member of local windows admin. And always Right click on Setup file and select run ad administrator
to start the installation
Hope this helps
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

ECC 6.0 with EHP1 installation

Hi Guys,
Not able find the correct installation guide for ECC6.0 installation (SR3) on AIX/DB2 platform. Can anybody please provide some link for the same ?
Also my customer has a requirement for latest available EHP i.e. EHP4. I understand that first we have to install EHP1 and then upgrade the system to EHP4. Is there any other alternative ?
Please provide some inputs if you worked on ECC6.0 installation with EHP1/4. I'm urgently looking for some help on this.
Thanks

Hi Mike,
If this is a fresh installation then you should go with the ERP 6.0 EHP4 READY SR1 Installation. The plus point will be in ehp4 ready, after the installation the netweaver software components are already on ehp1 and kernel is 7.01, while the ecc software components are still in the 600 level.then you can update it to EHP4 using EHPi.But remember it is MANDATORY that you should proceed with the EHP4 installation using SAPephi, else i think the system will be in a state where SAP will not support and its not advised to use system like that.
if you go with the normal installation you'll get version 700 and kernel on 700 and then you take it to EHP4.
I will go with option one.
Best Regards
Niraj

SAP IDES ECC 6.0 EHP7 Oracle Installation error (DODS.SQL is missing)

Hello community,
I am having a problem with the installation of the current IDES ERP 6.0 EHP7 Oracle for Linux x86_64 installation images.
I am using the Software Provisioning Manager 1.0 SP04_9-20009701 and selected installation option "SAP Business Suite 7i 2013 Support Release 1" > "EHP7 for SAP ERP 6.0 ABAP Support Release 1" > "Oracle" > "SAP Systems" > "Application Server ABAP" > "Standard System" .
I am installaing on SUSE Linux Enterprise Server 11 SP3 x86_64.
The installation stops at the "Import ABAP" stage:
Program "Migration Monitor" exits with error code 103. For details see log files(s) import_monitor.java.log, import_monitor.log).
import_monitor.log
TRACE: 2014-07-04 04:16:14 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDODS' finished import package:
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -ctf I /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/
51048312_1_EHP7_FOR_SAP_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DATA/SAPDODS.STR
/tmp/sapinst_instdir/BS2013SR1/ERP607SR1/ORA/INSTALL/BS2013SR1/ERP607SR1/ORA/STD/ABAP/DDLORA_LRG.TPL SAPD
OD
S.TSK ORA -l SAPDODS.log
TRACE: 2014-07-04 04:16:14 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' starting import package into database:
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error -
loadprocedure fast
TRACE: 2014-07-04 04:16:14 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDDIM' starting import package into database:
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error -
loadprocedure fast
INFO: 2014-07-04 04:16:15 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 2, waiting 4, completed 157, failed 1, total 164 error processing of package SAPDOD
S
ERROR: 2014-07-04 04:16:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process '/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_o
n_error -loadprocedure fast' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPDODS.log
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7
_FOR_SAP_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST
(SQL) INFO: found /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP_ERP_6.0_
Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST
(SQL) INFO: Trying to open /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP
_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST
(SQL) INFO: /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP_ERP_6.0_Instal
lation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/SQLFiles.LST opened
(SQL) INFO: Searching for SQL file DODS.SQL
(SQL) INFO: DODS.SQL not found
(SQL) INFO: Searching for SQL file /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7
_FOR_SAP_ERP_6.0_Installation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/ORA/DODS.SQL
(SQL) INFO: /net/iqfs1/install/sap/EHP7_for_SAP_ERP_6.0_IDES_Oracle/51048312_1_EHP7_FOR_SAP_ERP_6.0_Instal
lation_export_IDES-Unicode_Part1/DATA_UNITS/EXPORT1/DB/ORA/DODS.SQL not found
(SQL) ERROR: SQL list was not built successfully
(DDL) ERROR: check_sql_list() failed for /BI0/APERS_BOD00
(DB) INFO: disconnected from DB
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/IQ4/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140704041615
I have searched for the file DODS.SQL on the IDES import media. It is missing.
Could that be the cause of the error?

Hi Daniel.
It looks to be problem with export DVDs. Can you download the same again and re-extract it.
Regards,
Deepak Kori

Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint

Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav Kothari

Hi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen

SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the SQL Server
Reporting Services Application services i got the below error :
"Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
any kind of help would be much appreciated .

I'm having the same issue, but to me it seems like the instructions I've seen are all over the place. I already have SP 2013 and SQL 2012 SP 1 installed. I already added the features for Reporting Services - Sharepoint and Reporting Services
Add-in for SharePoint Products. I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy.
My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
Then when I read this about installing the BI features
http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed. Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option? I have the PowerPoint
Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits: SP 2013 EE is required. Which I have EE.
Is Reporting Services different or in addition to the BI Feature (PowerPivot)?
Have I missed a step?
Thanks for you help.
Kim
Kim.Williams

BPC-MS 7.5 SP5 Multi-Server Installation with SQL 2008

Hi Experts,
I have problem with multiserver installation. Even though installation user is SQL and OLAP administrator, installation lacks of creating Apshell OLAP database. OLAP server is using default port and we confirmed user can access this server. At the beginning installation user also could not create SQL database but we took Apshel.db9 and use Advanced Settings in installation and now installation process creates SQL Database but not OLAP database.
Actually our problem is not with creating Apshell OLAP Database we can import it from somewhere but this is the beginning of our OLAP connection problems. I do not know how many times we checked installation document and we installed Shared Features, ADO.net components etc..
Please see error screenshot [here|http://www.navis.com.tr/BPCMultiserverInstall.png]
Any ideas?
Thanks in advance,
Ergin Ozturk

Hi There
You need to ensure that the SQL Server has the correct protocols enabled, as per Bruno's post, you need to ensure that TCP / IP is enabled.
Additionally, you may want to ensure that the SQL Server is able to allow remote connections.
Please find below a link to a How To Guide on allowing remote connections to SQL Server
[http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx]
Hope this helps
Kind Regards
Daniel

ECC 6.0 with EHP4 fresh Installation

Hello Gurus,
A fresh ECC 6.0 with EHP4 needs to be installed on Wnidows + Oracle Platform, please let me know which of the following path should be followed?
1. SAP NW 7.0 installation (without EHP1) --> EHP 1 installation --> EHP4 Installation
2. SAP NW 7.0 with EHP1 installation --> EHP4 installtion
3. SAP NW 7.0 installation --> EHP4 installation
The other way to ask this questions is what are the dependencies between NW7.0 (ECC 6), EHP1 and EHP4?
Please let me know which of the above options is feasible and recommended. Please let me know a better option if its not present in the above options.
Regards,
Saurabh.

Hi,
refer the following SAP note 1143022.
Regards
Manohar

Error in Import Java Dump during installation on MSCS

Dear Experts,
I am facing the following the error during ECC 6 dual stack installation on MSCS.
PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
Apr 29, 2011 5:40:30 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:395)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:166)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
     at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
     at com.sap.inst.jload.Jload.main(Jload.java:580)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
I have successfully installed ASCS,SCS, and configured 1st MSCS node.
While installaing DB instance on 1st node SAPINST did not allow the physical host name of the node and gave the error oracle was not installed,install oracle before continuing so went ahead with the virtual hostname.I had faced oracle connectivity issues during import ABAP ,I changed the added the physical host name in listener.ora and continued.But durig the import java dump phase I guess the physical host name in expected in secure store key file.I can't edit the secure store file as config tool is not installed yet in the system.Please suggest me solutions and guide me whether I am going in the right direction.
Regards,
Dinakar
Edited by: mutnuru dinakar on Apr 30, 2011 10:22 AM

I have successfully installed ASCS,SCS, and configured 1st MSCS node.
While installing DB instance on 1st node SAPINST did not allow the physical host name of the node and gave the error oracle was not installed,install oracle before continuing so went ahead with the virtual hostname.I had faced oracle connectivity issues during import ABAP ,I changed the added the physical host name in listener.ora and continued
The SAPINST should allow the physical host name to get chosen you should not get this error.
You have to first install the oracle DB and after that Oracle failsafe at both nodes ( not in parallel) . Further while doing the DB instance installation on first node the SAPCLUSTER and ORACLECLUSTER should be online.
Can you mark the steps you did in sequence.
Regards
Edited by: Singh Dharm on Apr 30, 2011 2:06 PM
Edited by: Singh Dharm on Apr 30, 2011 2:08 PM

DbSl Trace: CONNECT failed with sql error '12518' at IMPORT ABAP

Hi
We are trying to install ECC 6.0 on windows 2008 SP2 and oracle 10.2.0.4. We get an error at IMPORT ABAP phase.
content of import_monitor.java :
java version "1.4.2_26"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_26-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_26-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
content of SAPSLOAD.log:
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100705173108
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12518
DbSl Trace: CONNECT failed with sql error '12518'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100705173108
content of sqlnet.log file:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleUED)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=UED)(CID=(PROGRAM=E:\oracle\UED\102\bin\sqlplus.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.4.0 - Production
Time: 05-JUL-2010 16:19:39
Tracing not turned on.
Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Protocol adapter error
    nt secondary err code: 2
    nt OS err code: 0
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=u34ssapued)(PORT=1527))(CONNECT_DATA=(SID=UED)(GLOBAL_NAME=UED.WORLD)(CID=(PROGRAM=E:\usr\sap\UED\SYS\exe\uc\NTAMD64\R3load.exe)(HOST=U34SSAPUED)(USER=uedadm))))
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.2.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.2.0 - Production
Time: 05-JUL-2010 17:28:38
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
Best Regards...,

Hi,
TNS-12560: TNS:protocol adapter error
Probably your listener or database is down...
If both are running, just stop the installation and reboot the server.
Then again start listener and database and continue SAP installation with "Continue old installation" option..
Also make sure that below environment variables are set properly...
ORACLE_HOME
ORACLE_SID
DBSID
Regards.
Rajesh Narkhede

ECC SR2 install with SWPM

Hi,
We are running SAP ECC 6.0 SR2 system as non-unicode. Now we need to install this system on new server with OS- MS Windows Server 2012 and DB as MS SQL Server 2012. Can we use SWPM to install ECC 6.0 SR2 system. We can not install our system as SR3 using SWPM because ECC SR 3 is unicode installation.
Regards
Lucifer

Hi Lucifer,
What i suggest you is install the SAP in the new server as per your requirement (non-Unicode to non-Unicode) then change form non-Unicode to Unicode.
As the reason is if you restore the data at that time there is a change of loosing your valuable data.
This is actually 2 requirements that could the best thing and less amount of risk involved.
Regards
Mohammed

DBConnect with SQL Server

Hi,
we have a dbconnect source system with sql server.
The installation is correct and we have the list of tables and views.
We can get a list of table/view content too.
But, when we make an infopackage request there is no idoc generated and the status color of the request get yellow.
Tips:
- We have in SQL the user with permissions to do selects and create views.
- The list of tables/views in source system not extract this user owner. Only extracts the sa owner.
- We connect with our user, not with sa.
Any one have an idea
Tanks
Xavo

Hi,
This is some sort of privileges problem . The user which is used in the Source system definition ,Should have Atleast select statement privileges on the table and view. If you are using view you can change the owner of this view to user , which is used in the Source system definition .
With rgds,
Anil Kumar Sharma .P

Sql@loader-704 and ORA-12154: error messages when trying to load data with SQL Loader

I have a data base with two tables that is used by Apex 4.2. One table has 800,000 records . The other has 7 million records
The client recently upgraded from Apex 3.2 to Apex 4.2 . We exported/imported the data to the new location with no problems
The source of the data is an old mainframe system; I needed to make changes to the source data and then load the tables.
The first time I loaded the data i did it from a command line with SQL loader
Now when I try to load the data I get this message:
sql@loader-704 Internal error: ulconnect OCISERVERATTACH
ORA-12154: tns:could not resolve the connect identifier specified
I've searched for postings on these error message and they all seem to say that SQL Ldr can't find my TNSNAMES file.
I am able to connect and load data with SQL Developer; so SQL developer is able to find the TNSNAMES file
However SQL Developer will not let me load a file this big
I have also tried to load the file within Apex (SQL Workshop/ Utilities) but again, the file is too big.
So it seems like SQL Loader is the only option
I did find one post online that said to set an environment variable with the path to the TNSNAMES file, but that didn't work..
Not sure what else to try or where to look
thanks

Hi,
You must have more than one tnsnames file or multiple installations of oracle. What i suggest you do (as I'm sure will be mentioned in ed's link that you were already pointed at) is the following (* i assume you are on windows?)
open a command prompt
set TNS_ADMIN=PATH_TO_DIRECTOT_THAT_CONTAINS_CORRECT_TNSNAMES_FILE (i.e. something like set TNS_ADMIN=c:\oracle\network\admin)
This will tell oracle use the config files you find here and no others
then try sqlldr user/pass@db (in the same dos window)
see if that connects and let us know.
Cheers,
Harry
http://dbaharrison.blogspot.com

ODBC function SQLDriverConnect() crashes with SQL Server 2008 R2

When calling the SQLDriverConnect() function from a 64-bit process and selecting a system DSN with a SQL Server Native Client 10.0 ODBC driver with SQL Server 2008 R2 SP3, then this call crashes here:
    sqlncli10.dll!SNIMemRegion::Pop() + 0x77 bytes
    sqlncli10.dll!SNIPacketAllocateEx2() + 0xa8 bytes
    sqlncli10.dll!Np::ReadSync() + 0x7e bytes
    sqlncli10.dll!Ssl::HandshakeReadToken() - 0x1b bytes
    user32.dll!InternalDialogBox() + 0x132 bytes
    user32.dll!DialogBoxIndirectParamAorW() + 0x56 bytes
    user32.dll!DialogBoxParamW() + 0x85 bytes
    sqlncli10.dll!SQLDriverConnectW() + 0x34f23 bytes
    odbc32.dll!SQLInternalDriverConnectW() + 0x17c bytes
    odbc32.dll!SQLDriverConnectW() + 0xa15b bytes
Am I calling SQLDriverConnect() correctly (see below)? Or is this a bug in the 64-bit version of the ODBC driver?
In the 32-bit version, everything works fine.
Here is a test program:
int _tmain(int argc, _TCHAR* argv[])
SQLHENV hEnv = NULL;
SQLHDBC hDbc = NULL;
SQLRETURN ret = SQLAllocHandle(SQL_HANDLE_ENV, SQL_NULL_HANDLE, &hEnv);
assert(ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO);
ret = SQLSetEnvAttr(hEnv, SQL_ATTR_ODBC_VERSION, (SQLPOINTER) SQL_OV_ODBC3, 0);
if (ret != SQL_SUCCESS && ret != SQL_SUCCESS_WITH_INFO)
fprintf(stderr, "SQLSetEnvAttr failed\r\n");
return EXIT_FAILURE;
ret = SQLAllocHandle(SQL_HANDLE_DBC, hEnv, &hDbc);
assert(ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO);
SQLTCHAR szConnection[2048];
SQLSMALLINT cbChars;
ret = SQLDriverConnect(hDbc, ::GetDesktopWindow(), (SQLTCHAR*) _T(""), SQL_NTS,
szConnection, _countof(szConnection)-1, &cbChars, SQL_DRIVER_PROMPT);
if (ret != SQL_SUCCESS && ret != SQL_SUCCESS_WITH_INFO && ret != SQL_NO_DATA)
fprintf(stderr, "SQLDriverConnect failed\r\n");
return EXIT_FAILURE;
else
fprintf(stdout, "Success\r\n");
return 0;
The stdafx.h contains the following includes:
#include "targetver.h"
#include <stdio.h>
#include <tchar.h>
#include <Windows.h>
#include <sql.h>
#include <sqlext.h>
#include <assert.h>
Steps to reproduce the crash: compile program with Visual Studio 2010 as 64-bit console application; run it and select a 64-bit SQL Server DSN.
If the crash does not occur, try using the "AllocationPreference" registry entry set to 0x100000 (see https://msdn.microsoft.com/en-us/library/windows/hardware/Dn613975%28v=vs.85%29.aspx for details); don't forget to reboot Windows. This registry
helps to find 64-bit portability issues.

Hi T.holt,
Personally, I don’t believe SQL 2008 R2 with ADMT 3.2 is supported. From the guidelines of install the Active Directory Migration Tool (ADMT), ADMT v3.2 requires a preconfigured instance of SQL Server for its underlying data store. We
should use SQL Server Express and install ADMT v3.2 on a member server. ADMT installation enforces the following service pack requirements:
• SQL Server 2005 Express must be installed with Service Pack 3 (SP3) or later.
• SQL Server 2008 Express must be installed with Service Pack 1 (SP1) or later.
If you use full versions of SQL Server 2005 or SQL Server 2008. In this case, you need to install and run the ADMT console on a remote computer, and you can run multiple ADMT consoles on different remote computers. If
you use a full version of SQL Server, ADMT installation does not enforce any service pack requirements.
For more information about installing ADMT in the target domain, you can review the following article.http://technet.microsoft.com/en-us/library/cc974370(v=ws.10).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Sap b1 compatibility with SQL server 2008

Hello Experts
i have installed Sql Server 2008 in my system
and when installing SAP Business One server setup
the database selection is not coming .Where we can select MSSQL 2008 am not getting that selection of sql .
Thanx in advance
Regards
Krishna Vamsi

hi krishna
if u are nor getting the selection for sql i would like to ask u whether u can work on sql or not there could be one easy way out it has to be a problem with the installation of sql is it possible for you to reinstall sql that would solve problem.
Regards,
Manish

ECC 6.0 with SQL installation in MSCS Envirnoment.

Similar Messages

Maybe you are looking for