EIS/AIS [Essbase Integration Service] and SHARED SERVICES

I got the following error message when trying to get Shared Services Connection with integarion server:
Error -1: Contact your AIS administrator because the Java runtime
environment may not be set appropriately on the server machine…
Exception in thread "main" java.lang.NoSuchMethodError:
com.hyperion.interop.lib.Repository.createProject
(Ljava/lang/String;Ljava/lang/String;)Lcom/hyperio n/interop/lib/ProjectResource; at eieapi.eieapis.createProject(eieapis.java:150)
can you help me how to reslove this issue...

"Lcom/hyperio n/interop/lib/ProjectResource;"
^-- did you create a variable that contains a blank space? --> "hyperio n"

Similar Messages

Not able to access the links to Essbase Console, Planning and Shared Servic

Hi,
I am trying to access the links to Essbase Console, Planning and Shared Services but I get the following error message.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I tried to restart all the services on all the servers and also restarted the servers but it didn't work.
I found some more errors in the starter file on the Linux box.
{\rtf1\ansi\ansicpg1252\deff0\deflang1033{\fonttbl{\f0\fswiss\fcharset0 Arial;}}
{\*\generator Msftedit 5.41.15.1515;}\viewkind4\uc1\pard\f0\fs20 Detected Java version: 1.6 in: /srv/Oracle/Middleware/jdk160_21/jre\par
Detected OS: Linux\par
parsing buildfile /srv/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml with URI = file:/s\par
rv/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml\par
Project base dir set to: /srv/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/resources/instance\par
[antlib:org.apache.tools.ant] Could not load definitions from resource org/apache/tools/ant/antlib.xml. It could not be found\par
.\par
[property] Loading Environment env.\par
Build sequence for target(s) `start' is [start]\par
Complete build sequence is [start, stop, ]\par
\par
start:\par
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server\par
[starter] Operation aborted because of a system call failure or internal error\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:177)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:47)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:133)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:105)\par
[starter] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)\par
[starter] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)\par
[starter] at java.lang.reflect.Method.invoke(Method.java:597)\par
[starter] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)\par
[starter] at org.apache.tools.ant.Task.perform(Task.java:348)\par
[starter] at org.apache.tools.ant.Target.execute(Target.java:357)\par
[starter] at org.apache.tools.ant.Target.performTasks(Target.java:385)\par
[starter] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)\par
[starter] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)\par
[starter] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)\par
[starter] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)\par
[starter] at org.apache.tools.ant.Main.runBuild(Main.java:758)\par
[starter] at org.apache.tools.ant.Main.startAnt(Main.java:217)\par
[starter] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)\par
[starter] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)\par
[starter] oracle.as.management.opmn.optic.OpticBadXMLConfigException: Error reading formFactorFile: /srv/Oracle/Middleware/\par
user_projects/epmsystem6/config/OPMN/opmn/.formfactor (/srv/Oracle/Middleware/user_projects/epmsystem6/config/OPMN/opmn/.form\par
factor (No such file or directory))\par
[starter] at oracle.as.management.opmn.optic.OpmnPhone.refreshFormFactor(OpmnPhone.java:628)\par
[starter] at oracle.as.management.opmn.optic.OpmnPhone.getLocalOpmnPhone(OpmnPhone.java:99)\par
[starter] at oracle.as.management.opmn.optic.OpmnQuery.getLocalOpmnQuery(OpmnQuery.java:77)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.init(OPMNStarter.java:48)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.load(StarterEngine.java:133)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:105)\par
[starter] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)\par
[starter] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)\par
[starter] at java.lang.reflect.Method.invoke(Method.java:597)\par
[starter] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)\par
[starter] at org.apache.tools.ant.Task.perform(Task.java:348)\par
[starter] at org.apache.tools.ant.Target.execute(Target.java:357)\par
[starter] at org.apache.tools.ant.Target.performTasks(Target.java:385)\par
[starter] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)\par
[starter] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)\par
[starter] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)\par
[starter] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)\par
[starter] at org.apache.tools.ant.Main.runBuild(Main.java:758)\par
[starter] at org.apache.tools.ant.Main.startAnt(Main.java:217)\par
[starter] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)\par
[starter] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)\par
[starter] Caused by: java.io.FileNotFoundException: /srv/Oracle/Middleware/user_projects/epmsystem6/config/OPMN/opmn/.formf\par
actor (No such file or directory)\par
[starter] at java.io.FileInputStream.open(Native Method)\par
[starter] at java.io.FileInputStream.<init>(FileInputStream.java:106)\par
[starter] at java.io.FileReader.<init>(FileReader.java:55)\par
[starter] at oracle.as.management.opmn.optic.OpmnPhone.refreshFormFactor(OpmnPhone.java:623)\par
[starter] ... 22 more\par
( Feb 06, 2012 04.33.13 PM ) Pass [00 min 05 sec] Starting BPMS_bpms1_Server\par
[starter] oracle.as.management.opmn.optic.OpticException: Error in starting opmn server\par
[starter] Operation aborted because of a system call failure or internal error\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:310)\par
[starter] at oracle.as.management.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:87)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.startAndReloadOpmnCtl(OPMNStarter.java:177)\par
[starter] at com.hyperion.cis.ant.starter.OPMNStarter.start(OPMNStarter.java:115)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.start(StarterEngine.java:190)\par
[starter] at com.hyperion.cis.ant.starter.StarterEngine.execute(StarterEngine.java:112)\par
[starter] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\par
[starter] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)\par
[starter] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)\par
[starter] at java.lang.reflect.Method.invoke(Method.java:597)\par
[starter] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)\par
[starter] at org.apache.tools.ant.Task.perform(Task.java:348)\par
[starter] at org.apache.tools.ant.Target.execute(Target.java:357)\par
[starter] at org.apache.tools.ant.Target.performTasks(Target.java:385)\par
[starter] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)\par
[starter] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)\par
[starter] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)\par
[starter] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)\par
[starter] at org.apache.tools.ant.Main.runBuild(Main.java:758)\par
[starter] at org.apache.tools.ant.Main.startAnt(Main.java:217)\par
[starter] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)\par
[starter] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)\par
( Feb 06, 2012 04.33.31 PM ) Pass [00 min 05 sec] Starting OHS\par
( Feb 06, 2012 04.41.51 PM ) Fail [08 min 20 sec] Starting FoundationServices\par
\par
BUILD SUCCESSFUL\par
Total time: 8 minutes 55 seconds\par
Please let me know how to fix this issue. Also please let me know where else can I find the logs to the errors.
Thanks.

The logs would be a good place to start, if you are not sure where to look post your OS and planning version.
Cheers
John
http://john-goodwin.blogspot.com/

Chinese Character Problem in Essbase Integration Service & Oracle9i

I installed oracle9i on windows2000,which character set is SIMPLIFIED CHINESE_CHINA.zhs16cgb231280. And I installed Essbase Integration Service 6.5.4 on HP-UNIX server. I designed an OLAP Model in Integration Services Console and I defined some dimensions name using chinese characters. When I saved the model, the chinese characters I inputed is saved as some question marks(?) in the tables in oracle 9i. After I loaded the dimension data which include the chinese charaters, the dimension data which is chinese characters also displayed question marks in the EIS console. I have added the variable NLS_LANG="SIMPLIFIED CHINESE_CHINA.zhs16cgb231280" in the .profile, but it did not work either. How can I solve this problem? Can I do any configuration on EIS files to solve this problem? Would you please help me? Thank you very much!

Check for SETLOCALE in EIS<BR>SETLOCALE <LANGUAGE_TERRITORY.CODEPAGE@SORT><BR>SETLOCALE .UTF8@default<BR>this might help you.

Essbase Integration Services Not Starting

Hi All,
I am using EPM 11.1.2.1 and unable to start the Essbase Integration Services. When I started the services from services.msc, I got the below error:
Windows could not start the Hyperion Integration Services on Local Computer.
For more information, review the System Event Log. If this is a non-Microsoft service, contact the service
vendor, and refer to service-specific error code 0.
Event ID 7024
What could be wrong with it / Does someone could help me ?
Thanks,
Alvaro

To whom it may concern......
1. Check in Windows Task Manager for the 'olapisvr.exe' process, and if it's running stop it.
2. Start the EIS Service Windows Services (Service.msc) as normal.
EIS started sucessfully...
Thanks

Create new user for Essbase Integration Services

Hi,I have two users witch creates olap models and metaoutlines.So I would like to create new user at Essbase Integration Services. How to create new user at Essbase Integration Services level?My system:Essbase Server 6.5.1Essbase Integraion Services 6.5.1Essbase Administration Services 6.5.1Thanks,Grofaty

A user at EIS level is actually a user set up on the relational catalog where your olap models/metaoutlines are stored. For instance if you got to the OLAP model properties dialog and the General tab you can see the owner here is the user you use to connect to your catalog. You can also prevent other users from accessing models not owned by them by setting the security option from the drop-down list on this tab.Mark Rixon www.analitica.co.uk

IS Error Member load terminated with error in Essbase Integration Services

Hi all,
Please help!
When i am trying to build the outline of a cube using Essbase Integration Services 9 it gives me the following error:
IS Error Member load terminated with error
Any replies - appreciated.
Thanks in advance.
Avishek Sarkar.

Hi Avishek,
Can you please post the EIS log contenets when error is coming? Also what are the options are you selecting when loading members?
Atul K,

Essbase Integration services(EIS)

Hi All,
Please can any one explain me what is EIS ? How it is related to Essbase? I have a EIS product license, but i want to know where it is installed in the Unix environment? How to find it. Is it related to drill through? We have few Essbase spreadsheet tools , is it related to that? Please provide information of it....
Is EIS is a product that acts a link between spreadsheet and essbase database?

Hi Glenn thanks for your prompt response.
I have a document which details the installation of Essbase version 5.02 p10 for Application Manager and Excel Add In and Essbase version 5.01 p9 for the SQL Drill Through on a user's PC under XP.
It also details the procedure to install the Essbase, Aged Debt and Trial Balance Toolbars and how to install the necessary ODBC Drivers.
In that document am not able to find EIS product. Is it some thing running background in unix server?
But user use, spreadsheet to connect Essbase and to some applications in the server. We also have some application toolbars which i mentioned above is it related to EIS?
I have gone through the document you mentioned, but in that it was refering a olapisvr.log file. But in server am not able to locate it.
Your help and guidance will be more helpful.

Essbase Integration Services Error Logic Implementation

Hi All,
We are using EIS for Member Load activity and populating the outline to Essbase for the cubes.
As part of this process we have the cbs file and bat script and we initiate the bat script for this activity.
Now, i want to see the Failure and Success of the Member Load into some other file and send a message for Success or Failure..
Moreover, i see the word 'synchronously' as part of success in general.
Did anyone implemented this anytime? If so kindly let me know how i need to check for the failures or Success
and will try to implement the same
Any help would be deeply appreciated...
Thanks...

This is a known issue in the EIS Version 11.1.1.3 and is fixed in EIS 11.1.2.1

Essbase Integration Services problem.

Hi All,
Thanks in advance.
I have access to only EIS Console through Citrix.
When I start EIS Console, after first loginwindow, it is throwing the error like " Server is not running, make sure that this is running" like so. As i think this is for EIS server. I m getting the console but unable to connect.
Now my Question is : Can we start the EIS Server through EIS Console. If there is any way PLease tell me.
Thanks
Shiv

You can't start EIS from the console. It should be running as a service on the server. If it stops (which happens more than I like) it must be restarted on the server. When I am in a production environment, when we are using EIS part of my process stops and restats the service before doing my EIS loads. It has saved me a bunch of problems. After stopping and after starting the service I use a sleep command to give it time to stop and start.
If you don't have access to the server, you will have to get someone who does to recycle the service

Essbase integration services

Hi Techies,
Good Morning to all.
I am working on EIS 9.3.1 version.
Just i have quetion to all of my friends.
Already i am having one olap model & metaoutline & data loaded successfully & that project got completed.
Now new requirement like they want to load the data in the same existing cube from different datasource (SQL).
Is it possible?? there is any other way??
Please suggest me ...
Thanks in advance.

If you dont need to change the essbase structure to accept the data from the another datasource.
You can directly load the data into essbase using SQL connection and rule file from the EAS itself.
Note:
Check the data which you are trying to load from another source is overwriting any thing which is already exists in the cube.
Best solution:
Club both the fact tables into a single
Do the necessary changes to the dimension tables so that resultant essbase will accept the complete data.
Build a single OLAP model to map and load the both data sources.

Integration Services Console cannot start

Windows XP Professional SP2
Installed the following;
- Hyperion Shared Services Release 9.3.1
- Hyperion Essbase - System 9 Release 9.3.1 Server
- Hyperion Essbase - System 9 Release 9.3.1 Client
- Essbase Administration Services Release 9.3.1
- Essbase Integration Services Release 9.3.1
When I tried to start Programs > Essbase > Integration Services > Integration Services Console, olapbldr crashes.
Anyone seen similar problems?
Thanks,
Kun

Installing Reporting & Analysis software changes the value of the system variable ARBORPATH, perhaps that's causing EIS to hiccup. If you still have Reporting installed just make sure your ARBORPATH on your server & clients is:
C:\Hyperion\AnalyticServices
(or whatever the path is to where you have AnalyticServices installed). Remove the extraneous entry that Reporting creates! It is not needed unless you have it installed on a box that has no Essbase installed, and only if you plan to use Essbase as a reporting data source. It causes issues with the Excel add-in for sure and I suspect it may be messing with your EIS.
Let us know if that helps. I assume this is 9.3.1?
-Karen

Integration Services Console

Hi all,
I installed relational database(ORACLE) and Essbase in seperate machine.
Then i created the DSN name in Oracle Installed Machine.
I mentioned that DSN name in Integration Services Console [Essbase Installed Machine], after doing this i get following Error.
http://minus.com/m8Cehe6iP*
Kindly view that URL and guide me.
Thanks in advance
ChiDam

Did u configure EIS to Essbase server? and did u see essbase server Services is running ?
Once u confirm above steps
Try to Check the Network Connectivity between the Server and Client Machines by using the commands:
* telnet
* ping
Using ping:
On Client Machine, open a Windows command prompt.
1. Type the Command:
C:\>ping <Server_Machine_IP Address>
2. Press "Enter" key which should return Ping Statistics with all Packets Sent. This confirms if there is Network Connectivity.
Using telnet:
On Client Machine, open a Windows command prompt.
1. Type the Command:
C:\>telnet <Server_Machine_IP Address>
2. Press "Enter" key which should return either an error or an open telnet session with the requested server. This confirms if there is Network Connectivity.
try checking these ..Hope this helps to show ur connectivity between ur client and server

Integration Services - MS Access

Part of our information is in Microsoft Access. Also we have information in Essbase. Is posible to use/apply Essbase Integration Services for the information contained in tables in MS Access?Thanks,

We do replicate data from Access to EIS. We take data directly from the olap extractor into Access and have rules setup to move the member data.-Kevinhttp://www.prepaidlegal.com/info/kjwolf

Studio vs Integration services

Hello All,
Can you plz tell me what is the difference between Essbase Studio and Essbase Integration services?
If i have Essbase studio installed,do i really need to install Integration services?
Thanks,
Dipika

To add to Sandeep's comments, it's my understanding that Studio is the future, and EIS is most definitely the past. What I mean by that is that Oracle essentially made no improvements to EIS with 11x, and is not going to do so in the future.
EAS is in the same position -- still supported, but not enhanced.
Studio is the way forward.
It really is way cool, and really reflects Oracle's drive to push Essbase to the next level.
Regards,
Cameron Lackpour

Integration Services - Dimension Table

I?m trying to build a dimension table for a star schema to be used with Essbase Integration Services. I need to know how to structure the table when the data in the fact table is at a more granular level that that of the Essbase leaf member. The typical structure of my dimension tables is: [Leaf Node Name], [Leaf Node Alias], [Gen01], [Gen02]?, where the leaf node name is also the level of detail in my fact table.

Well do remember bitmap indexes are best on columns where there not so many unique values. Everyone has differing opinions on what that # ought to be. In other words, the cardinality, or # of unique elements is not extremely high.
IN general, bitmap indexes will improve performance given that the CBO is using them.
Look at this post, it is a pretty good discovery on this sort of thing. it tends to be a design process, where you test with your given dataset and optimize it.
http://www.rittmanmead.com/2007/07/27/playing-around-with-star-transformations-and-bitmap-indexes/
-Greg

EIS/AIS [Essbase Integration Service] and SHARED SERVICES

Similar Messages

Maybe you are looking for