Elements 11 stoped opening. I reinstalled, it worked once, thjen stopped opening again

I get the very first screen. When I click there it all vanishes

II changed the settings to have the photo editor open rather than the welcome screen. Now I get nothing.

Similar Messages

  • I am unable to download photos from iPhone 4, SD card and SLR camera to iPad 2 using apple accessories. It worked once and then never again. Any ideas ?

    I am unable to download photos from my iphone4 , SD card , SLR camera to my ipad2 using apple accessories , please help , it has worked once and then never again.

    Plumchunks-
    The only accessory I know of that can be used to transfer photos from a camera or SD card to the iPad, is the Apple Camera Connection Kit.  The kit consists of two adapters.  One has an SD card socket.  The other has a USB connector to connect directly to the camera.
    I do not think you can transfer photos from the iPhone to the iPad unless you first transfer them to a computer.  If you then transfer the photos to an SD card, they must have eight character names plus suffix and be stored in a DCIM folder, just as if they came from a camera.
    One thing you can try is to reboot the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Rebootting will not hurt anything and sometimes clears up mysterious problems.
    Fred

  • I'm new to Mac, I recently downloaed steam for my husbands football manager game, having run ok for a few weeks it will no longer allow him to start up his game.I got help once it worked once but will not again....help please!!

    We're retired,new to IMac, I downloaded Steam for my husbands football manager 2011.It ran successfully for few weeks, but now will not allow him to start up his game.I got help from the mac team and it worked for one day but again has the same fault....help please

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • E3000 - WoL - Works Once, But Then Not Again

    Greetings,
    I am using WoL for one of the PC's connected to a E3000 on my home network.  I can successfully power on the PC from S3 (standby) or S5 (power off) state one or more times, but after a certain amount of time the E3000 fails to send packets to the destination PC and it fails to wake.
    Logging indicates packets are being received by the router.  They just stop being forwarded to the destination after a certain period of time.  I haven't measured this time exactly. 
    Research indicates that the router might be removing the destination PC's IP from it's ARP table, which in turn makes the PC unreachable until it is manually powered on and off again (S5) or put into standby (S3). 
    It works reliably and consistently, then stops within a few hours.  The issue is not related to power management on the NIC.  As I said, packets on the WAN are received successfully from the outside.  Packets on the LAN are also received, but not forwarded for wake.
    I am using various utilities to wake.  All work well.
    mc-wol
    Magic Packet
    Mocha VNC for iPhone   
    Does anyone have ideas what can be done to make waking the PC consistent?  The only other thing I haven't tried is manually inputting the static IP on the NIC...  the same IP that is reserved for it's MAC address set up on the E3000.  
    Thanks In Advance
    1 x r7000 Nighthawk 1.0.3.24
    3 x WNDR4500 v1 / v2
    e4200 Rev 1 f/w 1.0.05
    e3000 Rev 1 f/w 1.0.04
    QNAP TS-219P-II 4TB
    dns323 ext3 4TB
    Roku N 1080p
    Altigen ip-710 VOIP phone
    Other Routers - Asus (just ok), DLink (junk), Netgear (Current Favorite) & ProSafe, wrt54g & G2
    wvc54gca - Dumped this as it only support TKIP encryption & 54mbps
    Solved!
    Go to Solution.

    For Wake on LAN to work on a computer, it must have the following:
    •   A wired connection to an active computer network
    •   Motherboard
    •   Network adapter and adapter driver that supports the standard Magic Packet format
    •   Computer basic input/output system (BIOS) configured for WoL
    •   An operating system that supports WoL
    •   All routers between the remote location and computer required to WoL must allow IP directed broadcasts and support IPv4
    Here is the link Wake on LAN feature and settings: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20e3824721bb44f6afb3093679a7e883_21418.xml&pid=80&...

  • I re-installed my Mac OS, but now Elements won't open. Licensing stopped working. Error code 150:30

    I re-installed my Mac OS, but now Elements won't open. Licensing stopped working. Error code 150:30.
    This is Photoshop Elements 8, and I have the original disc with serial number so I can re-install that.
    The probelm is I'd need to de-cactivate the serial number before un-installing, and I need to open the programme to do that.
    Any ideas?
    Thanks

    Okay, I've found that this is a recognised problem.
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
    Error "Licensing has stopped working" | Mac OS
    and all the solutions tell me to find the folder FlexNet Publisher in my library.
    Problem is FlexNet Publisher doesn't seem to exist there. Can't find it anywhere on my hard drive.
    Gettting down to the end of that page gives me the following info....
    The FlexNet folders and files required to run Adobe applications can become corrupted or have permission problems if moved from one machine to another. They can also be damaged through a Time Machine system restore. FlexNet service licensing failures cannot be resolved by reinstalling the application or by using the Adobe CS5 Cleaner Tool. If permissions issues prevent the FlexNet licensing service from launching, accessing data, or communicating with Adobe processes, a licensing failure occurs.
    Well it looks like backing everything up using Time Machine may have caused all this problem. Anyone know how to get Flexnet Publisher back?

  • Photoshop Elements 12,  When opening Editor --  "Editor has stopped working"  Any solutions?

    Just purchased Photoshop Elements 12,  When opening Editor --  "Editor has stopped working"  Any solutions?

    i have same problem too i do all instructions that says before, make new ADMIN then reinstall ps element 12 then it works but few days later stops again

  • PS Elements won't open image

    I'm having a strange problem with the PS Elements 9 software on my wife's mini mac computer.  The program launches fine, and when I try to open a picture (any picture - I've tried lots) I get the various dialog boxes ("reading Photshop format", color mode conversion progress bar, etc.), but then no window showing the photograph.  No error message.   Also, none of the windows (info, history, layers, etc.) that I've selected show up.  If I go to the file menu to "open recent", it lists the photos I've told it to open but have never seen.
    I've tried uninstalling the software and then reinstalling it, but continue to have the same problem.  It worked fine when I last used it several months ago.  I have various other Photoshop software on my other computers (CS 5, CS 4) and have never had this problem.  Any ideas?  Thanks.
    Mini Mac 4.1 (2.4 GHz Core 2 Duo, 2 GB Ram), OSX 10.6.8
    Tom Valens
    Forest Knolls, CA

      The editor prefs often get corrupted. You may need to rebuild the editor preferences to resolve any conflicts.
    Hold down the Cmd+Opt+Shift keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it. Or go to applications and hold down the three keys whilst double clicking on the Photoshop Elements Editor application.
    You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
    Click on Yes
    Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.
     

  • PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?

    PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.

    Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time.  After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
    A Digiovanni
    Date: Fri, 11 Jan 2013 00:51:43 -0700
    From: [email protected]
    To: [email protected]
    Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
        Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
        created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
    Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications.  Regards, Pfaffenbichler
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop for Beginners by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Elements fails to open installs correctly

    Intalled elements 11 on Dell laptop with Windows 8 64bit, intel 3000 graphics with latest drivers. No errors but when I go to open elements from photoshop or new project, program begins to load but disappears. If I go to uninstall, I am told program is open but it s not visible in running applications or on screen or task bar. Reinstalled and installed several time with same result.

    sdhjf55
    How are you doing? Any break throughs yet?
    I have been studying your thread and have pin pointed some more questions to ask. I did not want to take anything for granted.
    1. Back in your post #4 in this thread you wrote
    "I ran as administrator which got me to the Welcome to Adobe and I can pick photoshop or elements. photoshop works but when I pick elements it starts to load, blue progress bar and circle show. After a minute everything disappears. I believe all drivers are up to date".
    Photoshop Elements 11 and Premiere Elements 11 are standalong programs. If you use the Premiere Elements 11 desktop icon that typically comes with the program (initiating Adobe Premiere Elements 11.exe), that should be opening Premiere Elements to its Welcome Screen where your choices are Organizer or Video Editor/New Project or Existing Project. There is no choice for Photoshop Elements. Did you mean Organizer when you wrote Photoshop?
    2. When you install Premiere Elements 11 on Windows 8 64 bit, do you accept the Default location in
    Local Disk C/Program Files/Adobe and then have the Adobe Premiere Elements 11 Folder in the Adobe Folder there.
    How much free hard drive space do you have where Adobe Premiere Elements 11 is on the hard drive? How much install and available RAM does your computer have? Who did the upgrade from Vista 64 bit to Windows 8 64 bit? A shop or you?
    Did you get a chance to do the ccleaner regular and registry maintenance?
    One of favorite statements is "Problems with the same symptoms can (often do) have different causes." Keeping that in mind, have you seen this Premiere Elements 11 Windows 8 64 bit Adobe thread on the issue of Premiere Elements 11 not opening? The end of the thread gets interesting when it talks about some "fixes".
    http://forums.adobe.com/message/4773135
    Among many others things, one of the posts in this thread goes to running Premiere Elements 11 from a new User Account with Administrative Privileges. Have you tried that yet?
    We will continue to watch for your progress.
    Thanks.
    ATR

  • PSE 6 Reinstall not working

    I'm a new user of PSE 6 and was recently experiencing problems with it opening. I would click on the icon and nothing would happen. I just discovered that I should have come here as there is a patch that I should have installed to fix the problem. It appears I have now made the problem worse by uninstalling it and trying to reinstall.
    I can't seem to get the reinstall to work and have done it several times. It runs thru all of the steps OK but when it gets to the registry section and the little green bar starts along the left hand side of the screen, like it's doing its thing, it then imediately jumps to the screen saying the install is finished. To me, it looks like it skips it before it's done. It never asks me for my registry info and I'm assuming that I should have to enter that in, just like I did when I originally installed the software.
    Once it tells me it's done and I close the window, there are no icons placed on my PC for PSE and when I go to the programs folder of my C drive, there are no application icons there either. There are some folders with PSE info, but nothing to run the software. Any idea what is going on?
    Many thanks,
    Tracy

    Hi Tracey,
    There is an Adobe Tech doc not sure whether it will fix this problem, but is related with reinstalling PSE on the windows machine.
    Check the point 9 "Reinstall Photoshop Elements in a simplified mode." mentioned in the http://www.adobe.com/go/kb402603 link and see if that helps.
    Regards,
    Ankush

  • Get error message "firefox is in offline mode, uncheck the work offline menu and try again " when trying to open firefox after downloading latest version of firefox

    after downloading the latest version of firefox, when trying to open it I recieved the message, "Firefox is in offline mode. cannot browse web. Uncheck the work offline menu and try again". Have tried several times to open with same results. Have even uninstalled firefox and reinstalled latest version and still get meassage after trying to open.

    thank you - that does make sense except i have another computer that connects to the internet in the same way but it doesnt happen on that one. i didnt change anything - it just started a couple of weeks ago after i updated firefox to 11.0. cant find any settings in firefox to alter either - thanks for the help

  • Why is it so difficult to convert a Raw image to a jpeg in Photoshop Elements?!  I have version 12. Once i realised to change the tickbox in Camera Raw to 8 instead of 16 i did. Having spent time working on my Raw images i save them as a jpeg and rename t

    Why is it so difficult to convert a Raw image to a jpeg in Photoshop Elements ?! I have version 12. Once i realized to change the tick box in Camera Raw to 8 bit instead of 16 bit and Flatten image ( sometimes can flatten image if the flatten option isn't greyed out) hey presto i thought i was up and running. However after saving the photograph as a jpeg and renaming it e, after the word edit. I switched off/on my computer only for all the images i had spent time working on to have disappeared. Feeling very upset as there is no Technical Help to telephone at adobe and i don't know what to do.

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

    Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Premier elements 12 wont open

    my premier elements 12 wont open at all and the photoshop 12 opens but the screen freezes straight away, was halfway through a video project but have been having difficulties from the beginning- the screen freezing when adding text and the playback and audio stuttering. Help!

    Lindaos
    Just some supplemental comments....all information is important in troubleshooting.
    I do not know if I am ready to suggest deleting the BadDrivers.txt file at this point. If and when we get to that point, the BadDrivers.txt
    file for Premiere Elements 12 Windows 7 or 8 64 bit can be found in the path:
    Local Disc C
    Program Data
    Premiere Elements
    Adobe
    Premiere Elements
    and in the Premiere Elements Folder is the BadDrivers.txt file that you delete.
    Note: The version 12 BadDrivers.txt file exists in the Premiere Elements 12 Folder along with Folders for other versions as well as 12.
    For prior versions of Premiere Elements, this BadDrivers.txt file would be in the folder of its version.
    Also, in order to see the above path, you need to be working with Folder Option Show Hidden Files, Folders, and Drives active.
    We look forward to more details of your issue so that we can rule in or out factors involved in your problems. Although video card driver considerations are important to the details package, there are a lot of other possibities in that package.
    Thanks.
    ATR

  • Adobe Premiere Elements does not open after installation

    Hello,
    I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
    I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
    However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
    I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
    I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
    I hope you can help me out!
    Thanks!
    Inge

    Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
    The Photoshop Elements worked.
    I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
    thanks
    Inge

Maybe you are looking for

  • How do i create *if (Key.isDown(Key.LEFT)* allow two buttons

    I got this code if (Key.isDown(Key.LEFT) && Math.abs(this["speed"+who])>0.3) { _root["car"+who]._rotation -= _root.rotationStep2*(this["speed"+who]/_root.maxSpeed); How do i allow it to have SPACE key and LEFT you probably knew it wouldn't work but i

  • Choosing the optimum graphics resolution when exporting to epub from ID5

    I'm creating a ebook for the iPhone that includes a bunch of images. I'd like some help choosing the correct resolution for those images when they're exported to an epub file. These images were imported into an ID5 document as EPS files. They are 100

  • Muzzle flash and similar?

    MUZZLE FLASH is there a muzzle flash effect?

  • [Solved] Out-Of-Date Packages In Official Repos

    Hello all, Not really a question, but a general inquiry regarding the whole out-of-date process. Suppose I encounter an out-of-date package, which is already marked as such, and has been for quite some time (can't really put a number on it), with not

  • Importing jpeg into pages

    I have been sent a jpeg to use in a document. It views fine when I open it in preview. However, when I import it into my document it just displays as a black rectangle. What am I doing wrong?