How do i create *if (Key.isDown(Key.LEFT)* allow two buttons

I got this code
if (Key.isDown(Key.LEFT) && Math.abs(this["speed"+who])>0.3) {
_root["car"+who]._rotation -= _root.rotationStep2*(this["speed"+who]/_root.maxSpeed);
How do i allow it to have SPACE key and LEFT you probably knew it wouldn't work but i tried this
if (Key.isDown(Key.LEFT.SPACE) No luck though. Not that it was meant too ???
Can you proide me the correct key to allow space key and left key pressed together.
Space bar is my booster.

If you want both conditions to be detected simultaneously, you need to test separately for each simultaneously...
if (Key.isDown(Key.LEFT) && Key.isDown(Key.SPACE))

Similar Messages

  • How do I create a pdf from just one or two pages of an existing pdf?

    I just purchased this product (acrobat online)
    and it is not allowing me to do the things it promised, e.g. saving portions of one pdf to another, combining pages or entire docuements to create, even typing into a document (editing)! I am so frustrated - can someone please help!?

    But I jut paid $89.00 for the adobe pack - if I subscribe to Acrobat Plus, will that be credited?
    Date: Thu, 19 Sep 2013 15:50:14 -0700
    From: [email protected]
    To: [email protected]
    Subject: Files.Acrobat.com How do I create a pdf from just one or two pages of an existing pdf?
        Re: How do I create a pdf from just one or two pages of an existing pdf?
        created by H.Spector in Files.Acrobat.com - View the full discussion
    Hi,
    Thank you for your subscription.  If you are Acrobat Plus subscriber then you can extract the pages from the PDF file using Tools> Pages> Extract pages.
    You can find "Tools" at right top once you open your PDF file in Acroat.
    If you are subscriber to PDF Pack then please download Acrobat XI Plus from www.adobe.com.
    PDF Pack service offers "Convert to PDF", "Export from PDF"(to Word/PowerPoint/Excel/RTF formats so that you can edit the exported files) and "Combine Files" (combine your files into a single PDF file).
    Please let me know if you have any quesitons.
    thank you.
    hisami
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5697921#5697921
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5697921#5697921
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5697921#5697921. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Files.Acrobat.com by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How can I create Accesss Key

    Hello friends
    We don't have a Basis guy here. I am an XI certified person wearing different caps. I am trying to append a structure to VBAK and when I try to make the change it is asking for access key.
    I looked at other SDN postings regarding this but unfortunately couldn't get much help.
    I have created the devolopers key by going to http://service.sap.com/sscr.
    But this key doesn't work when I try to use as access key. How can i create an access key.
    If anybody has step by step procedure and can share it with me, I will appreciate it.
    Thanks
    Ram

    You have to register object change in the SSCR for the access key.
    Hope this will help you.
    AT

  • How does one create product keys when developing 3rd party Addons

    HI
    DOes anyone have experience in developing 3rd party addons? How do you manage liscense keys, is there a function module which can generate the key?
    and buildingin a expiry date so that a customer can note hack a table entry to continue?
    Thanks
    Henry

    woodwing seems to have a nice toolset to make it easier for sure... but I'm not sure that is the correct direction for
    us.  As we don't want to have to submit anything to Apple.  Our needs are for internal use only and we would not be creating content for the public.
    I don't follow the ePup process fully...  PDF's we can load right onto the iPad.  It's a real shame about flash not working as we can make some very slick flash content right out of indesign with little effort.  (maybe the direction should be a Flash to HTML5 converter?  Goto page commands assigned to buttons would be wonderfull if they worked but when you export the doc to PDF Acrobat complains that it is not compatible.  When we export to flash it works like a charm on a PC.
    Haven't found a good gudie for bookmarks yet... and if that would give us buttons on each page to move the user back and forth through the document.

  • How to make the enter key act as a button?

    I have a CREATE and UPDATE button and I would like the user just to be able to press enter and perform the create or update as appropriate as if the button was pressed.
    Thanks in advance for your help.
    Greg

    Greg,
    Use the following so you don't loose the delete message:
    <script type="text/javascript">
    //<![CDATA[
       htmldb_delete_message='"DELETE_CONFIRM_MSG"';
       document.onkeypress = keyHandler;
       function keyHandler(e) {
          var keycode;
          var id = $v('PXX_ID');
          if(window.event){keycode = window.event.keyCode;
          }else if(e){keycode = e.which;
          }else{return true;}
          if (keycode == 13){
             if (id) {
                doSubmit('UPDATE');
             } else {
                doSubmit('INSERT');
             return false;
          }else{
             return true;
    //]]>
    </script>What is the name of your primary key item?
    Are you getting any JavaScript errors?
    Did anything happen?
    Regards,
    Dan
    http://danielmcghan.us
    http://sourceforge.net/projects/tapigen
    http://sourceforge.net/projects/plrecur

  • How do I create a second set of red yellow green buttons for right handers

    I've moved over from using a PC for years and still use one at work - so I've grown used to using my mouse for everything.
    So, being right handed - I'm wondering how I can move or better yet create a second set of red yellow green buttons at the top right of each screen. It's a pain having to scroll from one corner to the other all the time.

    Welcome to the forums Chiliad. It's rare that a question like yours is answered "you can't do that" but I've never heard of someone wanting to do this. OS X is robustly customizable right out of the box with its many different ways of accomplishing identical tasks, but I suspect the locations of these buttons is somewhat of an Apple trademark and rooted deep in OS X code. I would avoid trying to hack the system to change their location lest such a change cause a future OS X update to break.
    There are many third party tools available to customize OS X to your liking, but I can recommend without reservation just a few. Products like Tinker Tool and the utilities written by Unsanity seem to be generally useful and trouble-free.
    You can minimize a window by double-clicking anywhere in the title bar, but I find Exposé to be much more useful when managing multiple open windows. I've grown to use Apple-w to close and Apple-q to quit, but that's just me.
    Seems to me the engineers at Apple have put an enormous amount of effort into designing an effortless user interface, which in my opinion rewards the user with an experience that doesn't get "in your face" as much as Windows does. It's hard for me to imagine improving upon it much, but there are plenty of others who try!

  • How can i create multiple key-btree DB using bsddb3?

    Hi
    I use python language api.
    I couldn't create multiple data . I know when I use DB_MULTIPLE I must set flags DB_DBT_USERMEM how can I set this flag in python?
    please help me.
    Thanks.
    regards

    Hi thanks for reply.....
    PBP (CLAD)
    Labview 6.1 - 2014
    KUDOS ARE WELCOMED.
    If your problem get solved then mark as solution.

  • How do I create and header on the left and auto number pages on the top right? I can't rearrange my document by making page 10 page 5 and so forth

    I've just completed my school report however I seem to be having difficulty with creating a header. I've managed to create the header for all pages in my document by however I also need to use APA style and insert page number on the top right hand corner of each page. I've chosen to auto number them and clicked on INSERT --AuTO PAGE NUMBERS however if I need to make changes to the page numbers, each change i make repeats on every page. Please help.
    I also can't seem to rearrange my document. It's 10 pages long and i want to make page 10 page 1. I thought I could click on that page and drag it into page 1 position like in Keynote however it's not offering me that option. when i click on page 10 in my page thumbnails, all of my pages are highlighted yellow instead of that 1 particular page. what am I doing wrong? someone please help

    You can chose to make left and right headers different in:
    Inspector > Layout > Section
    To move material the best solution is always to copy and paste the content where you want it. You can move sections however so:
    click at end of page 9 > Menu > Insert > Section Break
    You will then have a separate yellow border around the page 10 thumbnail and can drag it to the beginning.
    Peter

  • How do I create a line that is established through two Point values?

    I'm given a number of fields and methods that must be used to establish a line that crosses through two Point values. This is a bit confusing because Point is also a class in the API, so I'm not sure where to begin with the given attributes and operations I have at hand:
    public Line (Point Start, Point End) {..}
    public boolean isHorizontal() {...}
    public boolean isVertical() {..}
    public void move(int x, int y) {...}
    public void display() {...}
    private Point theStart;
    private Point theEnd;

    @misty:
    There is a big, bold announcement at the top of this forum that reads as follows:
    BEFORE YOU POST A TOPIC HERE: Please be sure your topic is related to features or functionality of this site. This forum is not for general technology questions. Not sure which forum to use? Try searching for your topic in the "Search Forums" element on the left panel. See Known Issues to get information on issues we know about and are actively working on to improve your forums.sun.com experience.
    That announcement is also at the top of the screen where you wrote your post.
    There is also a sticky announcement thread at the top of this forum (http://forum.java.sun.com/ann.jspa?annID=34). The subject of that thread is "Before you post a topic here - This area is NOT for general technical questions". If you read that thread, it will tell you much the same thing as the announcement.
    Apparently, you missed (or chose to ignore) all three attempts to urge you to not post general technical questions to this forum. I encourage you to read them and please follow their instructions. Doing so will help you get better, faster answers to your questions, as well as keep the regular forum members from jumping down your throat for not paying attention.
    Please don't reply to this thread. Good luck.
    ~

  • How do I create a Toolbar like Windows Explorers allows you to set up

    I want to install Google toolbar as well as some others like Crawler Toolbar. Is there anyway of doing this in Safari

    HI and Welcome to Apple Discussions...
    Click Safari/Preferences. In the General tab, click the pop up menu where you see:
    Default search engine and select Google.
    If the Google search bar isn't visible, open the Safari Preferences window again and click:
    Customize Toolbar. Simply drag the Toolbar up to just the right side of the Address Bar.
    Carolyn

  • How do I create a session?

    In order to use methods like getValidSessions() in the Session class of the SessionAPI for iPlanet Portal Server, I need a Session object. There is no obvious way to construct one based on the javadocs. I can get one from a SessionID object, but in order to create a SessionID object, I need a HTTP request or an encrypted string, i.e. SessionID( String sid ). How can I create a Session object, or how can I create a SessionID object (which will allow me to get a Session object)? Any help is much appreciated. NOTE: I'm building a plain Java utility to use the Portal Server API to retrieve session and profile information, and I'm not implementing it as a servlet.

    From com.iplanet.portalserver.providers.ProviderAdapater use the getSession() method whish returns com.iplanet.portalserver.session.Session object
    Then from Session class use the method getValidSessions()method

  • How can I create a new entry without using LOV for foreign keys.

    Referring to TUHRA sample application based on HR database schema. JDeveloper 10.1.3.0.4
    How can I create a new employee without using LOV for the foreign key "job_id".
    On the first page I would like to choose the job_title from adf read-only table.
    After clicking on the "create new employee button" a creation form appears in which the job_id field is set with previous selection.
    Regards M.Winkler
    Edited by: user3541283 on 06.10.2008 03:44
    Edited by: user3541283 on 06.10.2008 03:50

    Hi,
    usually the foreign key is only set if the VO you select is dependent from a master. If e.g. you have DepartmentsVO1 that has an EmployeeVO3 as its nested VO, then creating a new instance of employees automatically add the foreign key. If you add EmployeesVO1, which is not dependent to DepartmensVO1, then the foreign key is not set. So if this is the case in THURA (keep in mind that this is not an Oracle demo but a sample used in a book about ADF) then all you need is to take the independent VO when building the new employee form.
    Frank

  • How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    How can I create a new recovery key if you automatically removed my trusted device after update do iOS 8?

    Hey -
    I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
    My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
    He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

  • How to create a key figure in SNP plannignbook which generate FA type order

    Hello
    trying to create a Key Figure in SNP planning book which generates FA type orders
    could kindly suggest how to do it?
    thanks
    elena

    Hi,
    You would be having different key figures in SNP. The type of orders that you see in Key figure is driven by type of categories or category group that you assign in planning area to each key figure. You can modifiy these cateogry groups in IMG settings.
    When you manually create a forecast through a report then automatically you will see those orders in key figures where you have assigned the category FA.
    Hope this helps.
    Regards
    Alhad

  • How to create Basic Key Figure, Key Figure and Characteristic

    Hello Gurus,
    I have copied a standard layout of KP06, named it as a Z- layout and made changes to it, like defined the plan data upload field as Object Currency enabled.
    However I want to add a Z-Field , tax holiday unit as a column to this layout which I am not being able to do. The reason is when I go to Insert a new element from Edit > Element > Insert Element and click on 'Key figure with Characteristics' I do not get the Z-Field as a key figure.
    I want to define the Z-field as a key figure, so that I can add it as an element.
    Would be really nice of you if you can let me know the t-code/menu path to do that.
    Regards.

    Hello Gurus,
    I wanted to share this information with you, hoping this will help you to help me.
    I also tried to create a Key Figure in t-code GS32. In the table I mention --> FAGLFLEXR and hit enter. It says no Key figure has been defined for FAGLFLEXR. Then I put the cursor on the 'Reference Entry'and click on copy. Then give the name of the Key Field I want to create.
    'Create Key Figure' dialog box appears. When I input the 'Row Text' 'Column Text' and click enter, I am getting an error 'The basic key figure  entered for table FAGL is not defined'. I go back and do an F4 on 'Basic Key Figure' field, then I do not get any options.
    I would be highly grateful if you can let me know how to create this 'Basic Key Figure' for table FAGLFLEXR.

Maybe you are looking for