Elite pro driver prob

?Hello!! Before some time i i have problem with my sound card. In device manager I see multimedia
audio controller with ? and after the installing of the driver nothing
changes. i red to support and in a week of correspondence suppor tell me to contact our authorised dealer.
I have this card close to 2 ears and i dont have Guarantee.Authorised dEALER dont want fix my card in cost and dont wat chek.
sombody know wat i can to do ? its so expenci've card and i thinck its card need worck more thor 2 years and if it have problem i can chance to fix it in the cost or bay only same pci card.
If sombody have any idea that i can do?
?p.s sorry about my bad english ))))))))))

If you have a 7. setup, then it's better to enable DD EX detection (and DTS ES), so it creates the rear center channel in the rear speakers (same goes for CMSS-3DHeadphone as it creates virtual speakers), but on a 5. setup it should be off.
Dynamic range it's a matter of taste; on 'Full', in order to listen clearly the speech you'll have to crank up the volume, therefore when the "action" begins it will be very loud , it's more theater-like but you may receive complaints from neighbors or even from your family (specially at late hours). On 'Night' mode it tries to minimize the difference between loud sounds and soft sounds.

Similar Messages

  • X-fi elite Pro Driver for Windows 7 64bit

    )X-fi elite Pro Driver for Windows 7 64bitH Hi all
    I've read in the past and toady some topics about the x-fi drivers and windows 7.
    Due to the fact, that I want to install win7 64bit in the next few days, i just want to know which drivers I should use for my Elite Pro.
    Currently I'm using XP and got no problems with the drivers yet, everything could be installed with the cd from my elite pro package.
    So as far as I understood the topics correct, there are 3 option which drivers i could use:
    . Orignal Creative windows 7 driver
    2. Daniel_k support pack
    3. Pax drivers
    Can anyone tell me the advantages or disadvantages of these drivers? Important for me are the "gaming" utilities and THX for my 7. Teufel system.
    Which dirvers should i use and work without problems?

    - i have? windows 7? 64 bit
    ? and having trouble with an older version
    ? SOUNDBLASTER AUDIGY PLATINUM ex
    ? i cannot get it to open mixers, or other Audigy functions.
    ? even with downloading Windows 7 driver from Creative.
    ? doug barron? 902 425 8836

  • Vista 64, Latest Driver & X-Fi Elite Pro: Audio issue with Pro Evolution Soccer 2008 (Pes 20

    Hi,i have formatted XP S.P.2 and now i'm using Vista Ultimate 64.I have got an X-Fi Elite Pro and i have installed all the applications using the CD-Rom.I updated the driver, Alchemy and Mediasource to the latest version.The system is totally clean and updated (I used Windows Update when i finished to install Vista and nothing was installed). I would like to know why i cannot play Pro Evolution Soccer 2008 like in XP: when i enter in the game i have a noise (looks like the noise of the needle in old gramophones...) and i cannot use the speakers (Creative ProGamer G500).If i turn the volume to 0 i can hear it too... i have to switch off the speakers or exit the game to delete it.Is it another bug I tried to uninstall and doing a new installation of the game but... no way men... Thanks p.s.After year and 4 months (release date of Vista) is it possible to have a decent driver... The Audio Quality in Vista Ultimate 64 bit is lower than in XP and the same wave files have distortion with the low and middle-high volume (60-70).
    Problems that i have never had in XP... i cannot reinstall XP another time. I bought Vista in 2006 and i cannot use it till you'll release a good sw.
    Have we to wait till 200 for a fuc.ing working driver
    My Hw.: Intel Core 2 Quad 6600, DFI Lanparty DK, 2GB DDR800 Team Group, X800XT 52MB, Enermax Noisetaker 600W, Creative X-Fi Elite Pro, Creative ProGamer G500, Plextor PX76SA, Logitech G5 and G5.

    The problem is now official: other customers have problems with some games (Pes 2008 and Crysis in particular). I'll show u the main italian hw. forum. There is a thread of more than 500 pages just about Creative X-Fi: http://www.hwupgrade.it/forum/showth...42043&page=550 I would like to know if u test drivers before sharing... because i don't know what you did in more than year.You should meditate, people... I paid more than 400 $ for an Elite Pro and after year and 4 month i cannot install Vista 64 too for audio issues with mp3-wave files and Pes 2008 or Vista 32 bit for problems with Pes 2008. This is my latest Creative product, you can trust.

  • OWC Mercury Elite Pro External Hard Drive - Share with Windows Machine?

    Hi,
    Others on this discussion have recommended the OWC Mercury Elite Pro External Hard Drive. Dumb question: my live-in girlfriend has a Dell XP laptop, and I have a MacBook. If we purchased an OWC hard drive with both firewire and USB, can we both use the external hard drive?
    Thanks, David

    You can certainly use their drives between a Mac and a PC. As mentioned, either format it FAT32 witht he 4GB file size restrictions or partition it.
    You can also use a program called MacDrive. It give a Windows machine that ability to read and wtite to HFS+ partitions. I have used it and it works nicely.
    There is a timed demo, so you can try it out and see if it meets your needs.

  • 52 ms input latency on X-Fi Elite pro card/Midi controller prob

    Hi, I don't know if someone can help me about this but I just bought an M-Audio keystation pro 88 midi controller and I can't get it to work well with my vst instruments(on my x-fi elite pro card). There is a very noticable delay until I hear the notes I'm playing on the keyboard with non-so-demanding VSTIs.
    I noticed that with the creative asio driver selected in nuendo, it has a 52ms input latency which I know is too high. I don't know if that's the answer to my problem but if I trust creative, i should be able to have asio latency as low as one millisecond. So that's already a problem midi controller or not.
    I'm sure that these problems can be fixed(asio or controller latency)because I'm able to have no noticeable latency at school with the same vsts and outdated computers way slower than mine connected via midi cables which are also supposed to also be slower than the usb cable I use for my controller.
    I thank you for your help if you are to reply to this post and I just want to have a decent sound(not soundblaster synth A or B which are about the only ones i'm able to use in real time)for my expensi've 88 notes hammer action midi controller. I will be very grateful of all the help anyone's going to give me.
    EDIT: I don't know why my post can be seen double on the forum index
    ps.
    I think my question is specific enough to post in a new thread because I already searched the forum for my answer and I haven't found it.Message Edited by Goshyouidiot on -06-200707:38 AM

    Are they not just recording audio signals there? The strange thing is that not a single software can detect any midi device on my computer, although there is a midi input in the front panel of the audio card. So this is the way i've done it with windows XP. Just installing drivers from the cd, running auto update and everything worked so fine (memorieeees...) and now I'm not able to record midi signals in cubase?or any other software because the creative vista drivers do not support the midi input of the frontpannel (thats what i think)
    I just tried a japanese version of the creative software cd which was modified to work under windows vista. I installed everything that came with this software package, but still no luck. When i plug in a Midi to USB interface, it works fine, but not so with the creative front pannel. So i'm going to take a look on the soundcard to get its "hardware id number" so that i can write an email to the creative support. I just can't find any other threads where x-fi elite pro users are able to record midi via the front pannel on vista 64.
    I was soooo in love with this soundcard as long as?i used windows xp. It was a perfect solution to combine gaming with music recording (i used different soundcards for both issues before, but it was just not so comfortable than just using one card for both) But then i finally was brave enough to get a windows vista and there it goes -.- nothing but trouble and wasting time and money since then....(new mainboard, new midi interface, tried dozens of different modified drivers to fix the crackling sound issue that come up with nforce mainboards and so on...) If i wouldn't need all of my 4 GB ram,?i would get back to?my good old?windows XP 32 bit version.
    Greetings

  • Creative X-FI Elite Pro prob

    Hi all, i'm new to this community, recently i just bought the X-FI Elite pro.
    When i first install using the creative driver CD, it has a crack sound from the Sound Card, anyway the installation was successfull. No problem when gamming, but everytime when i change to different mode, the card it self will have a crack sound, izzit normal?
    Thanks

    On certain mobo/graphics card set ups and some sound cards there is an issue with bus latency. In short while playing back audio you will hear a frequent crackling of the audio. That is not the same as the slight click the Elite pro makes when changing modes. It has been a Creative issue for many years but is only present with certain combinations of hardware. I have experienced that issue myself but several years ago. My current Elite Pro/PC set up does not have this issue.

  • Windows 10 Driver for SoundBlaster XFi Elite Pro?

    Hi everyone. I'm new to this forum and glade to join it.
    My reason to join is I'm asking if there will be a Windows 10 driver for the card Soundblaster XFi Elite Pro?
    Thank you for any information.

    http://forums.creative.com/showthread.php?t=714135

  • Elite Pro, CMSS-3D not working after driver update

    Have changed from an X-Fi Platinum to the Elite Pro and updated to latest drivers and now the CMSS-3D cannot be controlled from the I/O console.
    It worked before installing the new drivers.
    No other issues other than that.
    Anyone else have the problem?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • X-Fi Elite Pro - Recording from the Phono Input Prob

    Kit:?
    Vista x64
    4GB Ram
    Q6600
    X38 Mobo
    X-Fi Elite Pro
    Audio is taken via?Digital Output (not the optical one) from the External box to a Sony Cinema Amp.
    Have installed using the Vista X-Fi CD and updated to the July 2008 drivers.
    Problem:
    Unable to record from the Phono input on the external breakout box, in fact only the Line-In on the actual card seems to work, but when recording via the Creative Entertainment Console the recording has what sounds like reverb applied to it. Recording via Vista's Sound Recorder produces a clean sound but is in WMA and very low quality.
    Other Obvious Problems:
    Have to manually select the Input port via Vista's Sounds Panel, by setting the required input as 'default device'.
    Headphone socket on the external box doesn't anything coming out of it.
    Question:?
    Has anyone sucessfully recorded via the Phono input on an Elite Pro under Vista x64, and if so how
    Thanks.
    Message Edited by 0idsjagf on 08-07-2008 2:56 PM

    Huhu, right-click onto the window where all devices like microphone or speaker output are listet (record, playback) (Controlpanel " sound") Then you have the option to enable "show deactivated devices" maybe then the phono input is available to your needs.

  • Joe Meek Twin Q Pre-Amp and Elite Pro SPDIF/Digital input probs

    Hi. I'm wondering if anyone can help. I've just purchased a Joe Meek Twin Q Pre-Amp and I specifically bought it for a new Rode mic I've just got and it needed phantom power. I also paid a little extra for the digital 'outs', thinking I could take an optic or SPDIF out into the Elite Pro breakout box. The problem is, is that digital is not recognised at all - in Audio Codes it states it's an invalid signal. However, SPDIF is recognised saying it's a stereo signal at 48,000hz, but is only being 'heard' in my right channel.
    I have tried the line out into Line In 3, and there's no problem there. Joe Meek representative said it should be working as long as the bit match is the same in both units, which as far as I know is. Am I missing something here? I'm awaiting Creative to get back as it seems to me to be a breakout-box hardware problem, but I could be missing something?
    Does anyone have any experience and/or advice/info?
    Thanks in advance

    Well, since you're not getting response, let me see what I can do.
    I think you're saying the optical connection isn't working, but the coax (SPDIF) one is working, and then you're only getting the mic signal on one channel. The second part is easy to explain, but I never remember the solution suggestions. TOSLink/SPDIF, essentially, are stereo signals, and your preamp is simply putting its channel 1 signal on one side and its channel 2 signal on the other. If you had a second mic connected to the other connector, you'd have one mic on the left channel and the other on the right channel. Basically, you need to treat it as a mono signal and then either pan it into the stereo field, or just duplicate (convert) it to stereo. I'm sure there are ways, but someone else needs to join in with some experience. I'm not sure, but it seems to me if, say, you've put the mic in the channel 1 connector, you could take the channel 1 (analog) output and patch it into the channel 2 line input, and your digital outputs would probably get you the mic signal on both sides.
    On both devices, the TOSLink/SPDIF signals are, to the best of my understanding, basically the same thing in two forms. If one is working, than the other should be working too. That suggests to me either hardware brokenness in the preamp's optical out, or the Elite Pro's optical in. or a problem with the optical cable. CL's optical outs can be checked to see if they are putting out red light: if they aren't, there's a problem. That probably applies to the preamp, in this case. You can simply connect the Elite Pro's optical output to its optical input and record something from the digital input device. If that works, the cable and the digital input are probably OK, and it most likely the preamp's digital output is broken (although it could be a strange compatibility issue). If it fails, then it's most likely either a bad cable, or the Elite Pro's optical input is broken. Trying another cable, or some other piece of gear you have that outputs optical, ought to sort out which it is.
    -Dave
    [email protected]

  • X-Fi Elite Pro: Implementation of Effects in M

    Hi
    Can someone please help me here? It's quite urgent.
    I only just switched over to X-Fi from SB Li've yesterday. I'm missing a few things which IMO shouldn't be this difficult to find. If the manuals were printed, they'd basically be good for nothing more paper weights so I do hope someone here will be able to assist me.
    Before I start I should probably mention that I'm in Audio Creation Mode.
    . EAX presets: When I open the EAX controls in the Audio console, there are no presets plus the preset window is blanked out. The help file says that one should select a preset from the list but given the afore mentioned info, this proves to be somewhat impossible. How do I make the preset window acti've and get presets into it's
    2. Auxiliary Effects:
    a. In the SB Li've's EAX controls, one was able choose with which MIDI controller to send triggers for EG. a Multi-Tap Echo. If I understand it correctly, the MIDI implementation chart in the manual (which I stumbled upon by accident) seems to indicate that Auxiliary effect 3 is triggered by Controller 92 and Aux 4 by controller 94. However, I get zero response from either Auxiliary when triggering either of the 2 controllers. How do I trigger Aux effect 3 & 4 from my sequencer? Also I don't get any response from Aux 3 & 4 on the Wave channel of the mixer.
    b. Is there a better delay unit than the "Digital Delay"? The fact that Tap can only go to 207milliseconds and Tap2 to only 404milliseconds, makes it totally useless for a /4 note echo of anything slower than 48.5BPM. The SB Li've's Multi-tap used to be able to go into the thousands. I'm unable to hear what it sounds like since I can't get Aux 3 & 4 to work.
    I hope someone will be able to help me.
    Thanx in advance

    Hi
    Pardon me if I seem a little sinical in this post. It's just that I don't like buying a new and expensi've piece of equipment and having to do a runaround trying to fix problems which shouldn't have been there in the first place.
    It's a pitty that problems one has with a new piece of equipment or software almost always is fixable with something that would appear to be user incompetance when in fact it's the result of poor documentation. Anyway, thank you to the support team who helped me out. It would have been nice, though, if my more specific issues were answered concisely and not left completely unanswered.
    I thought I'd post the solution if someone could benefit from it:
    If you had previously run a Sound Blaster Li've! Platinum before installing X-Fi Elite Pro and you find that Auxiliary effects 3 & 4 doesn't work, it's likely that some of the previous SB Li've drivers had not been completely removed from your system. To do this you have to do a clean sweep of your previous installation (which I would have though should be handled by the uninstall program). Anyway, here's a link to a support page which describes how to accomplish this:
    http://us.creative.com/support/kb/article.asp?l=3&sid=72
    and then click on the appropriate link.
    One problem I had is that the CTZAPXX.EXE mentioned in the procedure doesn't appear on the driver disk that came with my SB Li've! Platinum. Fortunately I have a SB Li've 24bit as well and the app was on that driver disk.
    After going through the procedure as mentioned above, the 2 Auxiliary effects still did not work. I then installed the new drivers (Update 4) as available on Creative's Driver Page on 2 Dec 2006. At last it worked. A word of caution: Make sure you exit the Creative Volume Panel before installing Update 4. Otherwise, nothing will work as it should.
    OK so that fixed my auxiliary effects not working.
    I had to answer my MIDI controller question myself by testing with 0-27 values as the reply from support ignored this question amongst others completely. In all fairness, though, the MIDI implementation chart did tell me where to start the trial and error and reduced the test time considerably. And here's the result: Controller 92 does in fact control the strength of Aux 3 and Controller 94 controls Aux 4. There, that sentence took me like what? ...0 seconds to write.
    That leaves my other 2 questions:
    . Where has the presets gone under the EAX tab of the Audio Console when in Audio Creation Mode? There are 7 or 8 of them in Game mode but only a blanked out window in Audio Creation Mode.
    2. Is there a better delay unit available anywhere which allows for longer delay times. The current one is actually closer to a reverb unit than a delay unit as there are many reverb units with longer delay times than this.
    OK, so enough raving. Thanx for the help from support.

  • 5.1 sound X-Fi elite pro and DTT3

    Hi all?Ok, so I have an X-Fi Elite Pro, and the DTT3500 speaker setup from Creative. Both very expensi've where I li've. I could get 5. sound from my SB Li've! 5. digital, but no such luck on the X-FI. I've read all the posts, but when speaking to Creative tech support they tell a different story. I know I can get 5. (supposedly) from DVD etc. via co-ax or optical. How do I get 5. from other apps (such as VideoStudio) or games (BF242, etc.) that do not output DD or DTS?I've tried flexi jack to DIN (from card rear panel to the speaker amp), DIN to DIN (from break-out box to speaker amp) and 3 x 3.5mm stereo to DIN (from card rear panel to speaker amp) Nothing works. I get headphone sound obviously, and can get plain stereo sound (although I didn't get this setting right for optical; works with co-ax though)?(excerpt from tech support mail)
    To assist you, i would suggest to connect the DDT3500 to the soundcard using the 3.5mm jack and the DIN Cable provided directly to the soundcard through the Digial In and DIN Socket.. enable the "Bit-Steam off" in the Audio Console, 2. select " Digital DIN" on the DTT3500 FacePlateIn case if you need any clarification, please do not hesitate to contactus.(/end excerpt)?I have made up a cable with 3 x 3.5 mm stereo jacks > DIN and got no sound at all from this. Tried all my solutions with digital I/O both on and off.?This is all very limiting, as apart from games that I'd like to enjoy as they're meant to be played, I also do video editing and need to proof my surround mixes. Not very happy Creative. Even the tech guy where I bought the card assured me it would work with 5....

    I have never installed the updated applications available in the download page... just applications and driver for Vista 64bit inside the cd and i updated the driver with the latest one. Anyway, I: Reformatted and installed Vista.
    Installed Chipset Drivers.
    Installed Video Drivers.
    Downloaded and installed JUST the latest SB drivers and i have that **bleep**-ing error window...Guys, it's 2 years i try to install Vista...Have i to destroy this sound card If i have to change it, i'll never buy another creative product in all my life (and till today i have bought 3 sound cards, 2 webcam, 4., 5. and 2. speakers for every computer we have in the office...). Thanks p.s.What is the DMLL.exe service, please
    If i enter in the "Task Bar" is visible... if i close it and i restart the computer i find it... How can i delete it forever

  • Use X-Fi I/O console with X-Fi non-Elite Pro c

    Can I directly use X-Fi I/O console (from Elite Pro card, not the upgrade option from creative) with X-Fi Extreme Music? Beside plugging in the hardware together, what else should I do, e.g. reinstall driver from Extreme Music, or install driver from Elite Pro, or something else? I have neither hardware yet, so would like to ask you guys first. Thank you.

    If you need a digital I/O, or Digital access, there is a add-on module in the
    "Acessories" Category of the Creative Shop Link above on THEIR TOOLBAR that allows you plug into the Digital In...which provides both SPDIF (Coaxial) and Optical I/O Connectivity for yours and up to the newest X-Fi Sound Cards. Unfortunately, all my excitement as I did order one of these ($4.99, actually cheap for a change) have been deflated. As to being able to finially link up all my digital ouputs to run through my Shuttle system to hear my DVD's Digital Output and Cable TV DTS or Dolby 5., EX, etc. have been dismal at best. For it will not connect in DTS or Dolby, only in a simulated CMMS 3D downmix seems possible. How can this company get away with touting...Dolby DTS, Dolby EX, etc all over their boxes and it does not even handle such capabilities...and if it does...PLEASE PASS IT ON CREATIVE... I have been dealing with your nonesene for years and decided to give it another chance. BUT...as usual, the SOS....different label..that's all.
    PLEASE, if you get this, it just offers a hole to plug it in....doesn't mean your gettting the whole DTS or Dolby EX experience....just a simulated CMSS 3D Garbage, (BTW..if you get nothing with this adapter, enable CMSS...then you will at least get a sound out of this)....with a rediculously FAINT middle channel, for what...OH ONLY THE VOICES of the soundtrack that's all....a joke..
    Please respond if you know better.....
    Thanks....

  • X-Fi Elite Pro help plea

    I've just got an X-Fi Elite Pro, i slotted it into a spare PCI slot and booted into Windows XP.
    Windows loaded fine, I inserted the driver disk and installed all the software on it. I restarted.
    I get a window pop up saying "Multimedia Audio Controller" detected. I follow the messages to automatically find and install the drivers, after a while i get a message saying "The hardware was not installed because the wizard cannot find the neccessary software."
    Can anyone help me on this issue please?
    My X-Fi card has the code "SB0550" written on it btw.

    I've just been looking at the Device ID and the devices supported by the Creative drivers they have.
    My X-Fi Elite Pro defines itself as:
    PCI\VEN_0&DEV_0005&SUSBYB_002002&REV_00\4&CF8C54&0 &08F0
    The hardware itself is listed as:
    PCI\VEN_02&DEV_0005&SUBSYS_002002&REV_00
    PCI\VEN_02&DEV_0005&SUBSYS_002002
    and X-Fi devices are defined by the driver as:
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_00202
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_00302
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_002202
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_002302
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_002402
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_002502
    %XFi.DeviceDesc%=XFi_Device,PCI\VEN_02&DEV_0005&SU BSYS_002602
    It's close but not the same - so where do i get the drivers for my specific card?

Maybe you are looking for