Email at Requisition Forward in E-Recruiting

We want to generate email message to recruiter when requesting person forward the requisition to recruiter.
Is there any enhancement exist which can be triggers when requester click on forward button on requisition page from portal?
Regards
Iftikhar Ali

I can start the approval workflow on event "APPROVALREQUESTED".
In following steps I want workflow on step 4.
1.     Requesting person create and save the requisition using u201Crequesting person URLu201D.
2.     Assign recruiter from u201CRecruiteru201D tab and save the requisition
3.     Move to tab u201CForwardu201D and click on Forward button
4.     Click on u201CConfirmu201D button from confirmation message.
After step 4, recruiter should receive a workflow or notification email about requisition.

Similar Messages

When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?

When I forward an email from my Mac Mail, the body of the email I just forwarded shows as an attachment in the recipients outlook. Is there a way to change this so my clients don't have to open an attachment to read something that I forwarded to them?

Open Terminal in Utilties and copy/paste
This will send the attachment embedded inline. (This works in Snow Leopard, but not sure about Lion. Do a test first. If it doesn't work, just google "send attachment embedded + Lion." You don't actually have to send the message to see how it will appear.)
defaults write com.apple.mail DisableInlineAttachmentViewing 0
To reverse the setting, change the 0 to a 1
However, whether this will work or not will depend on what the e-mail client on the receiver's end does with it.

Email language wise forwarder in specific DL on Exchange Server 2010

Dear All,
Can we set email language wise forwarder in specific
DL on Exchange Server 2010.
Below is the scenario :
I have 4 users who sent mail to DL(DL-IT) in different languages like Dutch, German, English, now I want to set email forwarder on DL-IT like if someone send email in Dutch language then Dutch language
email should be forward to another DL (DL_DUTCH) and same for other language.
Thank you in advance.
Pradip Sisodiya

Hi Pradip,
afaik there is no solution based on a DL object. While saying that, if you had to handle only organization internal senders you may try like that:
1. please set the language property for all your mailboxes ; I guess you can do that based on the OU / Location the user objects lives in.
2. now in Exchange 2013 and Exchange 2010 there will be a Header for the language like that
Content-Language: en-US
Accepted-Language: en-US
(the language, en-US in my example, at the RHS will Change if you changed the Languages property of that Mailbox.)
3. finally you can add Transport rules to forward based on the Content-Language or Accepted-Language
a. Setting in
mail flow -> rules -> create a new rule (choose no template) -> more Options -> add condition --> apply this rule if ... -> a message Header --> enter text (= Content-Language) & enter text patters "language", as en-US
plus (=add condition) the recipient is your DL
b. do the following : Redirect the message to --> your recipient
c. save that rule.
if you ran the get-transportrule cmdlet, it Looked like that:
(you better create it once for initial testing and afterwards you can Export / Change that rule and use new-transportrule to apply the other languages / recipients)
If that Content-Language Header is present on the message, that rule will work as you expected.
Please remember to add the language property to your Mailbox. if you ran
$mymailbox = get-mailbox
$mymailbox.language
it really Needs to have the value you expected on the RHS of your Header condition.
Regards,
Martin

Deleting email addresses before forwarding.

When I forward an email, I delete the addresses listed in the email body. Before there was no problem, but now when I delete previous email addresses the whole email disappears. It is not in the trash, it is deleted from my computer mail. What can I do to stop this from happening? Thanks for your help.

+(Can you explain in detail what's happening? It sounds like you receive an email, you click "forward", which sets up a reply, you delete the header information (to, from, subject, etc) at the top of the original email, then send it? At what point does it disappear? Do you see it in your Sent Mail?)+
I receive the email, click "forward" which sets up a reply, highlight the header information that I want removed and when I click delete, the whole email disappears. I can't find it in any of my folders. The original is gone from all of my folders. I am now forwarding without deleting previous headers and emails. Thanks for your help.

New email, reply and forward icons are shaded how do I fix this please

I'm using Outlook on my Macbook Pro but the New Email, Reply and Forward icons are shaded and I can't use them. How to fix this please?

You will need to change your primary email address. This link should help.
http://support.apple.com/kb/HT5621?viewlocale=en_US
If you have the email you mistakenly used and the password, this will help.

I am trying to forward certain email I get to my icloud email to another email address. I have added the unwanted senders email to rules and included where i would like the email to be forwarded

I am trying to forward a certain email I get to my icloud email to another email address. I have added the unwanted senders email to rules and included where i would like the email to be forwarded, however it doens't seem to be working as i also added a second rule for testing purposes with my other hotmail account
any help would be great

new account are created without a password, so asking for it is normal.
see http://thunderbirdtweaks.blogspot.com.au/2011/07/pssswords.html
Compare the passwords Thunderbird has for the other accounts and see if using the same one is what you need to do.

BAdI for during new requisition creation in e-recruiting

Hi,
How to check what BAdI being called when new requisition created in e-recruiting?
Given BAdI HRRCF00_GET_ASSIGNED_SGR to add support group when new requisition is created.
But the BAdI was not triggered after i created new requisition in e-recruiting.
Greatly appreciate for any helps/comments.
Thanks.

E-Recruiting specific BADIs are not called in functions which are built in the ABA.
E-Recruiting BADIs are just used in E-Recruiting functions and classes.
The support team group BADI belongs to the new Manager process implemented in the new MSS scenario.
The easiest way to assign a support team to a requisition automatically, is by implementing a workflow, which is triggered by ERC_OBJECT ObjectCreated.
This will automatically assign anything you want. But in this case you will have the problem, that you can just assign a generic support group to a requisition, because no data was entered before.
Another possibility is enhancing a specific BSP-Application by using the enhancement framework. Post-Exists on class methods might help you. But you need to identify that specific BSP application, which is called during the specific save you need in order to have the right criteria provided.
Regards.

I have a work email that gets forwarded to my personal email

I have a work email address that forwards mail to my personal email, when i reply how do I insert the work email address into emails as that being the sender?

When replying, tap the "Cc/Bcc,From" section, then tap on "From:" If you have multiple e-mail accounts set up on your iPhone you can select which one you want the reply to come from.

Cannot select emails to delete, forward, move, etc.

I can no longer select emails for deletion, forwarding or moving to another folder by either swiping left or selecting edit. Once I swipe, the messages deselects on its own. If I hit edit and start selecting emails they quickly deselect. The only way I can manage messages is by selecting each individual email. Once this problem started, my battery began draining very quickly - dead within 4 hours.

Okay, the next steps in basic troubleshooting from the User's Guide are reboot and restore (first from backup then as new). Try each of these in order until the issue is resolved.

No email address when forwarding

Every time I forward an email, in the to: section the name of the person will just show up (from email I'm forwarding) their email address is not showing up next to it though like it should be. Please help, I am always forwarding emails to my assistants and they need to know who to email back.

Can you please explain more clearly what you're needing, I don't understand.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Windows Phone and Windows 8 Mail App not sending email from Reply/Forward

I have recently upgraded from Windows 8 to 8.1. After a successful upgrade I configured the Windows 8 Mail app to also sync with Exchange (2010 in house server). On my Windows Phone (Nokia Lumia 800) I have the same account configured.
This resulted in the problem that the Mail App and the phone do not want to send any emails that have been created by reply or forward.
The phone gives the following error:
"We weren't able to send this message, so we've put it in your Drafts folder. Before you try sending it again, you can check to see if the address is correct and that no attachments are too large."
The Mail App give the following error:
"There's a problem with sending messages from [email protected] at the moment. Check with your provider for more info."
If I create a new email there is no problem.
I have searched all over the internet for a solution to this problem, but could not find somebody with exactly the same problem.

I have exactly the same problem, but unfortunately no solution either... I'll be watching this thread, or post a solution if I find one...

Why does it take a few minutes for gmail emails to be forwarded to my icloud account on my Mac Book?

Suddenly, my gmail emails which have always been set to automatically forward to my icloud account on my, laptop (especially slow now), and iPad, are now taking several minutes for them to forward.
Why is this?
I did recently update to Yosemite. Could this be why? I have never had this issue.
Thanks!

Just to rule out Gmail, I have been having the exact same issue from a private-domain email account. Like you, I recently upgraded to Yosemite and I'd say the timeframe roughly corresponds to that. I've seen delays of as much as three or four hours, in fact. Crazy.

E-Recruitment - Requisition not visible in Recruiter Dashboard

Hi,
We have configured the E-Recruitment (HR_MSSRCF_REQUISITION) process and are using the standard workflow to route it to Manager.
The steps we have followed is as follows;
1. The requisition is created and sent it to Manager for approval.
2. Manager is able to open and approve the requisition
3. The Data is saved to the Database
4. Support groups are defined (HRP5151) and releavant lead recruiter is assigned (HRP5131) but when check the dashboard of the lead recruiter, the requisition isn't available.
Please let me know, if there are any additional steps to be performed.
Thanks,
Roopesh

Hello,
Which query have you used for checking as the requisition is usually in status 'draft'?
Regards
Nicole

E-Recruitment - Issue in Requisition Approval, flow to Recruiter

Hi All,
Im using standard WF 45600028 for requisition approval.
The request when created by Manager is going for approval to his supervisor and Supervisor in turn is able to approve the request, but the its not reaching recruiter.
When i verified Requisition monitor of the MSS view, then i see the request in "Draft" mode instead of "Released".
I feel this is the reason why recruiter is unable to see the requisition coming from Workflow.
Can someone help me change the status?
Thank you.
Pranitha

Hey Thanks Siddharth,
Anyways, my problem is resolved. What i mean on Recruiter's involvement is recieving the approved form so that he can take it up further for posting.
In My case Recruiter's dash board or UWL , nowhere is the data populated. So i was of the opinion that the approved requests are by default saving in draft mode and hence not reaching recruiter.
Finally, i reallized that there is a small refresh link, at the bottom of the dash board. I need to click on the each of the links in the dashboard and "Refresh" from the link at the bottom, then only my approved requests are showing up, that too under "My Application Groups, My Open Requisiotns and All requisitions".
Silly me !! I have wasted so much of my time debugging Workflow and changing all the possible config setting.
But i really wonder why cant the data base be updated when we refresh with F5 instead click on each of the links in dashboard inorder to see what has he got in his box. This seems little weird to me.
Regards,
Pranitha

I use Safari with Comcast email, when I forward an email that has pictures in the email it omits them

I use Safari with Comcast mail, whem I forward an email that has pictures in the email it omits them.

Make sure the photos are jpg format.

Email at Requisition Forward in E-Recruiting

Similar Messages

Maybe you are looking for