Emsg/signal 11 and REP-3000 problems after tweaking a PDF/XML report

Hello everyone,
Just wanted to check if anyone has encountered similar issues?
We have a custom rdf report installed by our Consultant/VAR, and is called / run from Oracle EBS using the Request Manager. This is an XML report that outputs a PDF file from a template. This report runs without problems.
We made a very slight tweak to the report's query, but now when we run the report, it reports an error, with the following message in the log file:
EMSG:was terminated by signal 11
REP3000 internal error starting oracle toolkit
When we revert back to the earlier report, it runs without problems, but this new report reports this.
I am pretty sure the changes made to the report weren't the cause of this issue because the tweaks are very minor AND I remember our Consultant/VAR encountering this issue when they first developed the report. However, they kind of forgot how they solved the issue before.
Any ideas how to fix this?
Thanks!
Derrick

This is just to close off a post I submitted years ago...in case it might help someone else in the future ...
Everyone keeps saying to change the display configuration. And actually, they were correct!! We just had to change the s_display.
In our case, we just set the s_display to :
:0.0instead of
hostname:0.0Then, we ran autoconfig for the Apps Tier.
For some reason or another, this worked.
This was on Oracle Linux 4, on EBS 11i.

Similar Messages

REP-3000 error after installing OAS 10.1.2.0.2

Hello All,
I've searched the forum and it looks like REP-3000 is a common error encountered when DISPLAY or NLS_LANG aren't set up properly. However, my variables are setup properly. I can run xclock without any problem.
This is after a brand new installation of OAS v10.1.2.0.2 (only forms and reports services). I already had the rdbms software installed v10.2 on my AIX server. I've installed OAS in another ORACLE_HOME.
After the installation, i tried to run the demonstrations....The forms services is ok but not the reports services. I know the variables are set properly but not sure what else to try. I've updated scripts like report.sh and rwrun.sh to add the DISPLAY variable there. I've also altered the opmn.xml file per some other documentation but to no avail.
Has anyone done this Forms and Reports Services installation on AIX or any non-windows server?
Thanks.

I checked the Metalink note# 264159.1 (I am setting the paramform=no when calling the report) as indicated in this document. Bug#3442598 status is "Fixed in 10.1.2.0.2" in Metalink. Is this might be another bug ?
FS, thank you for replying but using a table does not seem to be as a viable option - it is against the idea of dynamically striping the where clause on the form side. I have no problem passing individual parameter or group of parameters from forms to reports. This only happens if I dynamically strip the where clause from the system.last_query and pass it to the report. I don't know how to decipher the dynamically stripped where clause and parse it into individual values (parameters) that I can pass into the report. I just want to pass the where clause of the last executed query to the report. If we can not do it, what is the point of dynamically striping the last query. You mention putting the values into a table, can you please elaborate how should I parse the where clause that form generates (should be dynamic) into a table? The selected columns in each query can be different each time the users execute a custom query. This is why I don't think this table method you suggested will work. Maybe I am wrong. Have you done this before? Have you dynamically parsed a dynamically stripped forms query into table/s ? Any working example is really appreaciated.
I did not understand the length of the URL ? the P_WC user variable on the report side is 2000 characters long - more than sufficient to hold the where clause. What is the limit on the URL length? The error message shows the entire where clause with added %22 and %20 's - therefore I don't think the URL length is an issue here. But I maybe wrong. If the URL length is an issue, then the error message is ambiguous.
Thank you.

Disk Utility and repair permissions problem after upgrade 10.5.1

*Problem with Disk Utility* - +repair permissions don't work anymore+
After upgrading to OS X 10.5.1 tried to correct permissions with Disk utility. But I'm not able to repair permissions, because I get this message every time "fault: The underlying task reported a fault at concluding." and permissions repair stops. Has anyone else had this problem and does anyone have any idea how to get this working again?

Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

Software Installer and wireless internet problems after upgrade from Leopard to Lion.

Last weekend I upgraded the OS on my MacBook Pro from Leopard to Snow Leopard, and then from Snow Leopard to Lion. I'm having a couple of problems.
First, I cannot get the wireless internet to work. My internet connection is fine, I can plug the ethernet cord in and all is well. But I cannot get wireless signals to work. Have tried both my Airport Express and an old linksys router, and neither seem to work. They both worked just fine before the update. I had very fast wireless internet, and now nothing. With the Airport Express, when I plug it in iti'll just continuously blink orange, and the Airport Utility refuses to recognize it. The linksys router seems to work, because it puts off a signal and my iPhone connects to it. My computer recognizes the signal, but it won't open any internet pages, says I'm not connected.
Today I tried to install Apple's Migration Assistant software to help with my first problem. But a funny thing happened. The software installer says I don't have enough space. But I have plenty- I have almost 200 GB, and I only need 5 MB for the program. I've never seen this happen before, it's so odd. Any suggestions?
I really appreciate any assistance/suggestions!
Thanks,
Ellen

EDLIU wrote:
How do I purchase "Snow Leopard" from Mac App Store?
Please give me the link to "purchase and download the Snow Leopard" in Apple Online Store.]
You can't purchase Snow Leopard from the Mac App Store. Or "download" it. That will be possible for Lion.
For the Apple Online store, why can't you just look for yourself?
http://store.apple.com

Z77A-GD65 ram and DR. mos problem after 2 years without any HW change or OC!

Hi guys, i have three Z77A-GD65 from 2 years with the same hardware config, no overclock or others OC settings ....simply default bios settings; in this last 2 months, not at the same time, all of my 3 mainboards have the same identical problem.
One day, from nowhere, without any reason, i start my pc and mobo don't start, hangs with code 55 ( memory error) and Dr mos alarm led goes on, i try to reset bios .. nothing.
I Switch multibios to "B" bios and works perfectly .. i've tested all of RAM modules and result works perfectly !! .... all of three mainboards have the same identical problem!!
Now i use all my 3 PCs with "B" bios and works perfectly, because "A" bios hangs always with code 55 and with Dr. mos alarm led on, i try to update and downgrade "A" bios ... nothing to do ... "A" bios don't work anymore.
Any idea?

Quote from: Nichrome on 19-July-14, 02:32:51
Don't have to be rude
If same problem is on 3 motherboards then is something wrong with RAM or BIOS not the motherboard
>>Posting Guide<< Reminding again if you want to receive any help.
Nichrome, you misunderstood! ... I just responded to your affirmation .. that's all, it was not my intention to was "rude" as you wrote! OK?
Ram modules have been tested on other Asus mainboard .. .. no read/write errors and no hangs problems ... so all Ram modules are fine
About bios ..... maybe primary bios is physically damaged.... i try to reflash bios also with old version .. no way .. maybe primary bios damage in all 3 mainboards !! very strange!!! ... you know if there's a know manufacturing defect on this MB bios maybe on a particular MB serial part number? because i bought all 3 mainboards at same time about 2 years ago.
Quote from: Sea Dog on 19-July-14, 02:40:52
Obviously, there is 'something' that has caused BIOS corruption in all 3 mainboards A chips. Whatever that 'something' is, it may happen to the backup B chips as well. Recommend to concentrate on finding this 'something', what the common denominator is, and restoring BIOS chips A before the mainboards may become expensive paperweights. A shop with an SPI flash programmer device can fix the broken BIOS chips if not comfortable with doing the recovery procedure yourself.
Hi, yes i agree, In fact, my fear is to have, in a while, these mainboard totally unusable! ..... i think that primary bios is physically damaged or i hope, software damaged, I would try to recover it, if it's only a software problem (i hope so) ... do you know a procedure to completely erase cleanly that reflash the primary bios? i try to use dos MSI flash utility with "/p /b /n" options .. no success to restore A bios ... same story ... error 55 and DR-mos alarm led on.

Lumia 710 signal and Internet sharing problem

I've been using Lumia 710 since 3 months. Even though the initial experience was good now I'm facing a serious signal problem with the phone. We recently moved to a high-rise building where the signal is weak inside the rooms. If the phone looses the signal it doesn't pick-up the signal even though network is available. This is causing a serious a trouble to me as I don't receive or make calls during the period. I either need to switch-off and switch-on again or I need to turn-on and turn-off flight mode for the phone to pick up the signal. Sometime even though the signal shows 3/4 bars I won't be able to make/receive the calls.
I'm also facing a issue with Internet sharing option. Even though devices are able to connect they are not able to use the internet/data from phone. I was using the same SIM with other phone of different make and it was working pretty fine. I rely a lot on internet sharing option and now I can't even swap my SIM with old phone as Lumia uses micro SIM.
Please let me know the solutions to both these issues.

That is not normal though. Bring your phone to your local Nokia Care Center and let them have a look at it.
Internet Sharing on Edge/G is not working very well, try and find a 3G connection (which is fast enough) and you will get a better experience.
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Any fix for random art and song order problems after adding new music?

If I sync my touch with itunes as a restore, all cover art, albums and playlists are correct. Once I add anything new or make a change and re-sync, random cover art is missing and random songs are in the wrong order. The only way to fix the problems is through a complete restore. Has anyone else had this problem or figured out a fix? I am using the latest itunes on a PC with XP.

A few issues, but sorry let me try to understand.
Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
started skipping songs - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
As for item 2, you can try Hard Reset if you like to download MP3 validator.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

E 72 GPS and E-mail problem after firmware upgrade...

Hi - to all the gurus out there,
1. i upgraded my firmware to 31.023. Now My GPS (whether using Ovi Maps or Google Maps) locks only at home ( probably the place of my last GPS lock before the upgrade- my guess). Tried many times but it simply refuses to lock anywhere else.-- annoying - someone help please
2. The mail client has become unbearably slow and doesnt update using 3G or GPRS anymore. I checked all access points selections and everything else in settings. In fact except for WLAN, its become a `Non e-mail capable` phone.
3. Skype only lets me IM now??????? weird!!
4.Snaptu only logs in on WLAN.
5. and last but not the least.. in the chat setup. the keyboard doesnt work anymore.
waiting for some help
thanks

Ok, Now the GPS seems to have resolved itself after I deselected `Network Assisted`, but initial lock time seems much longer. Maybe that was the problem.

How to resolve "Contacts has stopped" and "Sync experiencing problems" after ICS upgrade?

After receiving the Droid Bionic operating system upgrade yesterday, my phone has lost its record of all my contacts, is unable to retrieve them from Vzn Backup, won't synch with my gmail contacts, and won't even allow me to dial phone calls. Does anyone know how to resolve this?
I'm getting the error message when I tap the People or Phone icons:
Unfortunately, Contacts has stopped.
When I go to Accounts & Sync, I get a Sync error, and the message
Sync is currently experiencing problems. It will be back shortly.
(I have been getting that message since yesterday.)
And under Settings > Backup Assistant+ Contacts, when I tell it to Synch Now,
Unfortunately, Backup Assistant+ Contacts Client has stopped.
I tried the Verizon chat service, and was very frustrated to be told that I either have to call Tech Support (hard to do when your phone won't dial!!!), or go to a store for them to fix it in person.

Good to find this forum on Android issues... Thanks Verizon!
    I also started getting the 'Unfortunately, contacts has stopped' after the new OS update. I want to add my 2 cents since I found a very different fix (after trying the other stuff)...
My "contacts stopped" problem seemed to come and go, but actually I think it was more subtle, at least in my case, only affecting some of my contacts but not others... When I finally got tired of putting up with it, I tried a number of Power-Offs, hoping to clean up something (hey, it often works for Microsoft OS). At this point, I noticed that some contacts would get the errors but not others. Then I found this forum, and I was optimistic that the clearance of the cache data would fix it, as it had for others... but not so lucky, in my case.
   FINALLY, I decided to take a look at my Google contacts online. There were any number of duplicates that I don't recall creating. Perhaps emails or phone calls occasionally produce some of these? There were also a few contacts that I did not recognize at all (maybe due to the same causes?). SO, I cleaned up the online version of my contacts, went back to my phone, and now the contacts are no longer "stopped"!
   I hope this can help someone. I wish I had thought of it earlier.

Officejet J6480 and HP Scan problem after upgrade to OSX 10.9

Hi everyone,
Product: Officejet J6480
Problem: HP Scan won't open after updating to Mac OSX 10.9 Mavericks
Error Message:
HP Scan cannot be opened because of a problem.
Check with the developer to make sure HP Scan works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Any thoughts on what I should do? From what I can tell, the HP Support information asks me to run an Apple Software Update. This takes me to the Apple Apps Store, and I'm not really sure where to go from here, since this seems to be the wrong direction.
Thanks for any and all help.
J.

Hello,
I am sorry to hear you are having scanning issues. I would like to try to help you.
Are you able to scan from the Print & Scan window?
Click the Apple menu, and then click System Preferences .
Click Print & Scan.
Click your printer in the left pane.
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.
Are you scanning to your computer or scanning to email?
Please let me know and I will look into this further for you.
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

Preview app and retina display problem after installing Maverick

Hi everyone, i upgraded to Maverick yesterday and i now have a problem with the software "Preview 7.0". I've got a macbook pro 13" retina.
Before Maverick i could visualise image in high resolution using Preview, and the 100% view was showing the image full quality. Now my Preview software acts like i'm not on retina and i can only visualise my images with the resolution of a standard monitor.
Does it make sense ? Please help !!!

I'm having the same issue with Preview not displaying images at the correct resolution. If you also look at the info in Preview, there are metadata issues showing up. Under "Creator's Contact Info" this is the info displayed.
Creator's Contact Info: , CiAdrCtry, CiAdrExtadr, CiTelWork, CiUrlWork, CiAdrPcode, CiAdrRegion, CiAdrCity, CiEmailWork
Something is broken with the program.
Macbook pro retina 15" (late 2012)

HT1420 i just installed new iphone software and facing a problem, after updating its software itune demanding a password for backup all data that is in itune(pc). n i dont know about this password........what happen now ??

after updating my iphone 3gs ,itune demanding a password for restore backing up file and i dont know about this password so what should i have to do ???????where i can get this password??????

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Lightroom desktop and mobile sync problem after reinstall

I've just had a new PC and resinstalled Lightroom. Since then, sync hasn't worked either way. The status bar at the top simply says "syncing X photos" but doesn't make any progress. Any ideas?
Message was edited by: Geoff Walker Title modified for clarity

Hi Guido, thanks for responding. I've now managed to fix the problem by clicking 'Delete All Data' in LR Mobile preferences. The problem must have been caused by me reinstalling LR on a new PC.

Mail and address book problems after updating to snow leopard

Hello, I recently installed snow leopard on a an imac running os10.2. The installation process stalled and I called Apple and spoke to someone who had me shut down the machine and start again. The second attempt worked but when I first opened Mail there were no messages all mailboxes were empty and I was unable to send messages. I tried "rebuild" and nothing happened at first but on a later restart the messages finally showed up and the program worked normally. OK. But now I find that of my hundreds of contacts in "Address Book" only a few of them remain. "Address Book" doesn't have a rebuild command. "Help" says to look for the particular folder from the old system and copy it to the new but I can only locate that folder in the new system. None of the old system is there, and why should it be? I wouldn't want the old system software taking up all that space when it isn't needed.
Does anyone know how I might recover those contacts?
thank you for your kind attention,
Julian

Hi,
I'm sorry that number was from memory. I checked the disk that came with the computer and I find that it was version 10.4.1
Thanks for your interest.
Julian

Emsg/signal 11 and REP-3000 problems after tweaking a PDF/XML report

Similar Messages

Maybe you are looking for