Officejet J6480 and HP Scan problem after upgrade to OSX 10.9

Hi everyone,
Product: Officejet J6480
Problem: HP Scan won't open after updating to Mac OSX 10.9 Mavericks
Error Message:
HP Scan cannot be opened because of a problem.
Check with the developer to make sure HP Scan works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Any thoughts on what I should do? From what I can tell, the HP Support information asks me to run an Apple Software Update. This takes me to the Apple Apps Store, and I'm not really sure where to go from here, since this seems to be the wrong direction.
Thanks for any and all help.
J.

Hello,
I am sorry to hear you are having scanning issues. I would like to try to help you.
Are you able to scan from the Print & Scan window?
Click the Apple menu, and then click System Preferences .
Click Print & Scan.
Click your printer in the left pane.
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.
Are you scanning to your computer or scanning to email?
Please let me know and I will look into this further for you.
Thanks!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Disk Utility and repair permissions problem after upgrade 10.5.1

*Problem with Disk Utility* - +repair permissions don't work anymore+
After upgrading to OS X 10.5.1 tried to correct permissions with Disk utility. But I'm not able to repair permissions, because I get this message every time "fault: The underlying task reported a fault at concluding." and permissions repair stops. Has anyone else had this problem and does anyone have any idea how to get this working again?

Will try installing OS X 10.5.1 again from the downkoad that you recommended. Won't be able to do this untill after the New Year but I'll let you know if this helped. I had another problem after he 10.5.1 upgrade and that was that the Security update 2007-009 also refused to install. Could this be related too the problems with Disk utility and the permissions problems.

Printer problem after upgrade to OSX Mavericks

Help!! My Canon MX310 printer no longer works after I upgraded to OSX Mavericks. Does anyone else out there have the same problem or point me to a potential solution? Thanks

First and probably the most important is go up to your Black Apple uuper left and do the Software Update. Double check that your plugged in to the USB port on your Mac. Restart the Mac and you should be good to go. Iwould also go to Canons web site and make sure there are any New Drivers for Mavericks.

HP deskjet F735 scanning problem after upgrading to Snow Leopard

I just upgraded my mac to snow leopard and after which my hP all in one doesn't work as it use to be. I don't have problems regarding printing and photocopying. It's the scanning that I had a problem. The photosmart doesn't work anymore and if I use preview, print& fax from system preferences and image capture still it does not scan and even i select the scanner. A message will just popped up that there is no device selected or unknown error occured. pls. help. and thank you

vive,
If you can't get Scanning running with the In-OS solution, a full Snow Leopard compatible solution is available [here|http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al- 75095-1&lc=en&dlc=en&cc=us&product=3457028&os=219&lang=en].
Let me know if that doesn't solve your problem.
Just trying to help.
Andrew
Message was edited by: HP Mac Architect

Software Installer and wireless internet problems after upgrade from Leopard to Lion.

Last weekend I upgraded the OS on my MacBook Pro from Leopard to Snow Leopard, and then from Snow Leopard to Lion. I'm having a couple of problems.
First, I cannot get the wireless internet to work. My internet connection is fine, I can plug the ethernet cord in and all is well. But I cannot get wireless signals to work. Have tried both my Airport Express and an old linksys router, and neither seem to work. They both worked just fine before the update. I had very fast wireless internet, and now nothing. With the Airport Express, when I plug it in iti'll just continuously blink orange, and the Airport Utility refuses to recognize it. The linksys router seems to work, because it puts off a signal and my iPhone connects to it. My computer recognizes the signal, but it won't open any internet pages, says I'm not connected.
Today I tried to install Apple's Migration Assistant software to help with my first problem. But a funny thing happened. The software installer says I don't have enough space. But I have plenty- I have almost 200 GB, and I only need 5 MB for the program. I've never seen this happen before, it's so odd. Any suggestions?
I really appreciate any assistance/suggestions!
Thanks,
Ellen

EDLIU wrote:
How do I purchase "Snow Leopard" from Mac App Store?
Please give me the link to "purchase and download the Snow Leopard" in Apple Online Store.]
You can't purchase Snow Leopard from the Mac App Store. Or "download" it. That will be possible for Lion.
For the Apple Online store, why can't you just look for yourself?
http://store.apple.com

Wi-fi and data signal problems after upgrade to ios 8.0.2

Hi all,
I have an iphone 6 and updated to ios 8.0.2 two days ago (skipping the ill-fated ios 8.0.1). However, since the update my wi-fi signal is even worse and keeps dropping out, as does me 3G/4G signal.
Is anyone else having this problem? Should I (can I?) roll back to ios 8?
Thanks!

You are not alone.
As stated by gdgmacguy you may need to do a full reset/restore, but this may be overkill. Before putting your iPhone back to factory defaults, you should try doing a full power down cycle (press and hold the power button, slide the off switch on screen). Wait a few seconds before powering back up. Put your password in to unlock the iPhone and wait to see if your wifi/cellular signal improves. If this does not work, then you need to see if there is something else messing with the handset. The way to do this is to backup all your stuff first and then do a full factory reset. DO NOT RESTORE your iPhone yet. Let it start up as a new handset. If your wifi/cellular signal does not improve, then there is likely to be a hardware issue and you should take the handset back to your point of purchase. If your signal does improve without any apps etc, then it could well be that you have some apps using background services. Turn off background services and switch off cellular data and see if this helps with the wifi stuff. If so, then you need to go through the list of apps trying out which combination works.
iOS 8 is - in this shark's opinion - a bit of a bugfest and still has a number of issues for Apple and Developers alike. I expect to see 8.0.3 and 8.0.4 or maybe even 8.1 before too long.
Hope this helps.

Problem after upgrading to OSX

I have a power mac G4. For the longest time i've been running 9.2 on it.
This week I formatted the hard drive and installed OSX. After installation I ran software update and it upgraded me to the newest version of 10.39 Ever since I have changed the OS....many operations unexpectedly quit.
For example, i'll go to setup printers and it quits....I click on safari....safari loads but doesn't respond. etc etc. Anyone have an idea of what the problem may be? Or what direction I should go in to troubleshoot this?

Hi kindrecordings, and Welcome to Discussions!
Is the Firmware up to date, on the G4? Available Firmware Updates
Does the G4 meet the Panther System Requirements?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
Did you use a Full Retail Version, of the Panther Install CDs?
What type of install did you do? A Simple Upgrade, an Archive & Install, or an Erase & Install?
Did you Repair Permissions, before & after the upgrade?
When posting about difficulties you may be having, it is best to impart as much information as possible. This assists users, in giving you the most accurate responses.
ali b

Audition CS6 plug in scanning failed after upgrade to OSX 10.9.1

I upgraded a machine to 10.9.1 Mavericks and Audition does't show any thrid party plug ins, no AU no VST, no VST3.
I've pointed AU several times to folders, trashed all preferences and user settings as decribed here in the FAQ - no go!
The funny thing is that all plug ins from all companies (of course only legal ones!) work in all formats in all other applications, DAWs and what not.
It is ONLY AU CS 6 that does the scanning for many minutes, I can see the plug in names flying thru, but afterwards nothing is available.
I'm now puzzled. Any hints how to get my plug ins back in AU CS 6? Thank you.

Ok - no help here. But I found a kind of solution. I deinstalled Audition CS6, deactivated before, and made a fresh re-install. Then I copied old Mountain Lion Audition preferences from a Timemachine backup. From there I made a new plug in re-scan and it worked.

External Hard Disc problems after upgrade from OSX 10.4 to 10.6

I have a La Cie external hardisk which I connect to my MacBook Pro with a firewire cable. It is formatted with UFS/Unix filesystem and was very fussy about being unplugged without being ejected under 10.4. If it was accidently unplugged with 10.4 it would take about 10 minutes to mount the next time it was plugged in, while it was checked, but would work fine.
Now with 10.6.1 the permissions show me having only read access (so I decided to make a copy of the disk and reformat it). Unfortunately when the disk is plugged in, it immediately shows in the finder, but is behaving strangely - it only shows some of the files in the filesystem and ceases to function at all after a few minutes. If I try to verify the disk using Disk Utility I get an error message saying that it is unable to unmount. I've also tried DiskWarrior, but it says the filesystem is unsupported.
Any ideas would be gratefully received...
Thanks!
Chris

this very much sounds like a failing/failed hard drive. you can try reformatting it wile booted from the snow leopard install dvd using disk utility there. if that does not work (I suspect it won't) I would get rid of it altogether.

Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

Basic troubleshooting
Reset
Restore with backup
Restore as new ( better )

My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

check and make sure that an alert style has been choosen for certain alerts, and make sure you check your sounds in settings

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Officejet J6480 and HP Scan problem after upgrade to OSX 10.9

Similar Messages

Maybe you are looking for