End User's mailing list administration

Hi,
I have a customer who has just migrated from iMS 5 to newest JES05Q4. Everything seems to be OK except one thing: In iMS 5 end users were able to use Delegated Admin to manage their mailing lists.In 05Q4, Delegated Admin does not allow end users to login. Is this a configuration issue, or is that function removed from the newest Delegated Admin? What is the recommended way for web-based mailing list manipulations?

Yeah, that's gone from the current DA. We're hoping to get better stuff into JES5, due out sometime around the end of the year.

Similar Messages

  • How to Use the same iview for both KM End User and the KM Administrator

    Hi friends,
    *This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
    Menu Options.
    i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
    Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
    the presentation settings for the KM Folder u201EReports_kmFolder‟.
    Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
    -> Km Content. Click on Details link of the folder reports_kmFolder.
    Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
    Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
    Click u201EOK‟.
    Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
    Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
    How rto resolve this????
    Regards,
    Prasad.

    Hello Prasad,
    Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
    Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
    Regards,
    Lorcan.

  • Manage users in mailing list

    Hi,
    I have a few groups/mailing list in ou=groups under root suffix. Now i need to create an admin just to edit/modify these users which are belongs to these groups. How do i it?

    Messaging Server 5.2 came with iPlanet Delegated Admin, which is the tool suggested for managing users and groups.
    Three years ago, when this product was introduced, nobody really thought about having a limited admin to do what you're asking.
    You can certainly achieve what you're looking for, in the current product, though there's no GUI for managing groups/lists.

  • CUCM End User Administration

    Our Helpdesk staff performs the basic functions of add/remove phones and add/remove users from CUCM.  We've just upgraded from CM 4.2 to CUCM 8.5(1).  We are using the integrated CUCM LDAP and not AD integration.  My Helpdesk users are able to use the User/Phone Add option to create a new phone and a new CUCM End User.  They are able to edit all the necessary properties of the phone and line settings.  But with their current group/role memberships they are unable to change attributes of users or to be able to delete them.  The only Role I can see to add them to that allows changes to End Users is Standard CCMADMIN Administration and the only User Group is Standard CCM Super Users.  Both of those give far more rights than I would like Helpdesk staff to have.  Am I missing something obvious to allow them to perform End User management?  Has anyone else encountered this?  Below are the groups/roles my Helpdesk staff are currently part of.  Any help would be apprecitated.
    Bryan
    I've added the users on our Helpdesk to the following Groups:
    Standard CCM Admin Users
    Standard CCM End Users
    Standard CCM Phone Administration
    Standard CTI Enabled
    Standard RealtimeAndTraceCollection
    Which automatically adds them to the following Roles:
    Standard CCM Admin Users
    Stadard CCM End Users
    Standard CCM Phone Management
    Standard CCMADMIN Read Only
    Standard CCMUSER Administration
    Standard CTI Enabled
    Standard CUReporting
    Standard RealtimeAndTraceCollection

    Bryan,
    If I remember correctly, there isn't a pre-canned role that will allow for End User administration. I don't know why.
    Your best bet is to create a custom Role and User Group. This way, you can give your Helpdesk exactly the access they need. The descriptions for the Role permissions are pretty self-explanatory, so it should be pretty easy to accomplish.
    Steps:
    1) create new role
    2) assign permissions to the new role
    3) create a new User Group
    4) assign the new Role to the new User Group
    5) assign the new User Group to the End/Application User accounts for the helpdesk.
    This maybe helpful: http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/a02mla.html#wp1062944
    HTH
    Adam

  • Appraisal - tcode access to core and end users

    Hi Experts,
    Please let me know which transaction code access is to be given to Super Users, Core Users and End users from the list below.
    And also, Please let me know if I have missed out any transaction codes related to Appraisals.
    T codes for PMS Basic Setting
    OOHAP_BASIC           Basic Appraisal Template Settings
    OOHAP_CATEGORY           Appraisal Category Settings
    OOHAP_CAT_GROUP     Category Group Settings
    OOHAP_SETTINGS_PA    PA: Settings
    OOHAP_VALUE_TYPE     Standard Value Lists
    T codes for PMS Process
    PHAP_ADMIN     Administrator - Appraisal Document
    PHAP_CATALOG     Appraisal Template Catalog
    PHAP_CHANGE     Change Appraisal Document
    PHAP_CREATE     Create Appraisal
    PHAP_PREPARE     Prepare Appraisal Documents
    PHAP_SEARCH     Evaluate Appraisal Document
    This is very urgent..Your immediate response is highly appreciated.
    Thanks!

    Hi,
    End users are authorized with
    PHAP_CHANGE Change Appraisal Document
    PHAP_CREATE Create Appraisal
    PHAP_PREPARE Prepare Appraisal Documents
    the T.codes
    where they can prepare appraisals, if mistakenly entered wrong appraiser or appraisee they can edit
    For other activities administrators must have autorization
    Regards
    Ratan Puli

  • Problem creating mailing list with Server Console

    Hi,
    when I create a new mailing list, I do the following:
    1. Right click on groups folder in Console
    2. Choose New->Group
    3. Entering all data and checking "Mail Account" under Account
    The documentation sais, that a Mail-tab should now appear. But this is not the case for me!?
    I can only create the group like this and have to add the attribute "mail" - to enter an email address - manually..
    Is this normal? Am I doing something wrong or missing something? Also disallowing posting on this group can only be set manually. Shouldnt all this be done using a nice GUI dialog?
    I'm using Directory Server 5.2 Patch 2. Also tried 5.2 Patch 4. Both same problem.
    Thanks in advance
    david

    got the instructions from the "Sun Java System Messaging Server 6 2005Q4 Administration Guide", chapter "Managing Mail Users and Mailing Lists with the Console Interface"-"Managing Mailing Lists":
    http://docs.sun.com/app/docs/doc/819-2650/6n4u4du0e?q=messaging+server&s=t&a=view
    Step 6 sais: "Click the Mail Account box. -> The Mail tab becomes visible in the Create Group window."
    Thanks,
    --David                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Accessing Work Items assigned to other users from end user page

    Hello Experts,
    We are using Sun IDM 6.0 SP1 at our client place. Most of the applications integrated with IDM are manually provisioned, in the sense, once after all the necessary approvals are received the request will be assigned to a group of provisioners, they will manually connect to the requested application and create the account in native system. There are more than 100 such provisioners in the organization.
    Current design is to assign a work item to all the provisioners (like Multi approval) and once a provisioner assigns the request to himself then the corresponding work item will be taken out from other provisioners approval queue. These provisioners login to end user page of Sun IDM to access their approval queue as only the end user page is SSO enabled.
    Because of the large number of requests in the system (more than 50k) and each request having 100 work items, the number of work items in the system is huge and thus the performance of the system is very poor so we are working to change the design to bring down the number of work items in the system.
    Customer is not convinced to have a dedicated person who can get all these work items in his queue and assign it to the appropriate provisioner, they are looking to have a solution something similar to the current one in which all the provisioner can see all the requests in the system and they can pick from it and assign to them.
    So we are thinking to create a generic id in the system and assign all the work items to that id, and make changes to the “end user work items list” file so that all the provisioner can see the work items that are assigned to them as well as that generic id.
    But for some reason I’m not getting the work items assigned to other users in the end users page. I have tried assigning all the capabilities to logged in user and tried some code changes in “end user work item list” page.
    Please share if you have any sample code which can list the work items assigned to other users in end user page. Also please let me know if there is any better alternate to this problem.

    Hi,
    There is a option to find and get other user's workitems. Please check the attestation and remediation tab. Use the form portion from attestation page and add it in the Work item list form. This will enable to the user to search for another user's workiteams and assign it to him/her manually. (The user needs to be assigned proper admin rights)
    To get all the workitems, in the system, you will need to query the repository for all the workitems.... but not sure it will be a good idea in your case as the volume is very high.
    Hope it helps
    Regards
    Arjun

  • Prepare end user trainning document

    i have configured LSO and now my client want me to prepare end user training documents, please provide your inputs and guide me on how to prepare them , and some good tips on how to conduct the training

    Hi
    Whenever you are preparing an end user manual first you need to identify the roles, I mean we need to identify the activities to be performed, who is going to perform those activities and steps to perform those activities.
    Here we go, If we look at your thread you would want to prepare LSO End user manual, for this module the roles could be as follows:
    1. Training Administrator
    2. Booking Administrator
    3. Learner (Internal/External)
    4. Billing Administrator
    The following activities could be performed by the above roles.
    1. TRAINING ADMINISTRATOR : Prepare an end user document for this administrator by explaining the Catalog Preparation Process such as creation of Course Group, Course Type (with different delivery methods, payment methods etc) and Creation of courses.
    2. BOOKING ADMINISTRATOR : Prepare an end user document for this administrator by explaining the
    different registration processes such as Classroom for externals, classroom for internal employees, E-learning for external, Remote/Virtual Classroom for externals and internals etc.
    3. LEARNER : Explain the steps to access the courses created by the training administrator (for ex: provide the link, show the course group, course type and course descritpion, course fee, course days etc...) and also explain the online booking process
    4. BILLING ADMINISTRATOR : Explain the steps to bill the course (different invoice models) for external peoples and explain the procedure of Activity Allocation for the internal employee courses.
    Please close this thread if you got clarifications on how to prepare end user manual for LSO processes. It is obvisouly not possible for anybody to give exact end user manual for any module, since the processes followed by companies are different from each other.

  • MM end user QUESTION WEBSITE

    Can you please refer any MM -enduser Question & ans reference website

    Hi Sameer, you are a the best place to know the real life issues faced by consultant. I don't see any other place where end user questions are listed. I would suggest you to discuss the business processes with your seniors/ colleagues. Spend some time on SDN where you actually see the what kind of real life problems may come during implementation (yeah, you can treat them as end user problems). Last but not the least ... think logical ... you'll surely be able swim once thrown in water

  • Group address (from mail list) is added to subject line

    Just this week-without changing any settings-emails that are sent to a mailing list show the addressee in the subject line as well as the address, but in brackets, i.e. address [email protected] / subject -[[email protected]] great news!
    I checked with my ISP who hosts our mail and they thought it might be a virus attached to address book or mail program.
    Can anyone help? It is a problem in annoyance only, altho it interferes with searching.

    Just this week-without changing any settings-emails
    that are sent to a mailing list show the addressee in
    the subject line as well as the address, but in
    brackets, i.e. address [email protected] / subject
    -[[email protected]] great news!
    That is very unusual. You might want to check with the mailing list administrator and see if anything has changed there. Is there anything unusual about the way you create and send these messages?
    I checked with my ISP who hosts our mail and they
    thought it might be a virus attached to address book
    or mail program.
    Hmph, obviously they haven't got the slightest clue what they're talking about. This might be true with a Windows machine, but there is no such virus on Macs. You can safely set this worry aside.

  • After changing a mail list name in Server end, users can't see the update in outlook client

    Dear all,
    This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
    Does anyone know how to fix it?
    Thanks,
    Franklin hong

    Hi,
    Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
    If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • End user cannot e-mail to most people... 550 error.

    I have an end user that reported to me that she hasn't been able to e-mail to some of her contacts for almost a year now. When I questioned what she was doing and see here is what I got.
    She uses WebAccess to manage e-mail. When she tries to send e-mail to contacts both inside and outside the district the other end user never gets said e-mail. She states she doesn't get an error or anything. When I have her demonstrate the process I notice that she gets a lot of "Save as Draft" when she presses the send button. I am still trying to figure out how to resolve that issue. She stated this started happening on her home (Personal) desktop but is now happening on her work laptop as well. She stated she was able to send e-mail using her phone.
    When I e-mailed her the first time I received an error from the MTA stating "550 A proper RFC822/2822 address must be given." I ran a GWCHeck reindex/fix against this account and it reported errors as well as fixed them. I was able to get her to e-mail to me using her laptop after that but she is still stating her home desktop isn't working. I can't find much regarding this specific error as stated. I did send her a response asking her to delete all contacts in Frequent Contacts and try to e-mail me again to see if she has issues with that. I am still waiting on a response for this.
    Anyone have an idea on how to resolve this?
    Thanks
    Richard

    In article <[email protected]>, Rhuhman wrote:
    > I have an end user that reported to me that she hasn't been able to
    > e-mail to some of her contacts for almost a year now.
    >
    Clearing the frequent contact list and the GWCheck are good starts.
    Do subsequent GWChecks for this user come clean now? Sometimes the
    errors it says it clears needs some additional prodding to fully clear.
    Do you run regular GWChecks for the whole PostOffice? I usually aim for
    Structure Fix daily, and Contents Fix weekly. Checking those logs for
    this user may assist. http://www.konecnyad.ca/andyk/gwlogs.htm
    It would also be worth following a particular message with the user. Is
    the address actually accurate, what does the Properties of the sent
    item show, what messages does GWIA give about the message?
    If needed, there is message tracking that can be turned on to track the
    message through POA to MTA to MTA to GWIA.
    Andy Konecny
    Knowledge Partner (voluntary SysOp)
    KonecnyConsulting.ca in Toronto
    Andy's Profile: http://forums.novell.com/member.php?userid=75037

  • Background Administration Setup - End Users

    Hello
    We want to put in some restrictions from Transaction SM37 to our end-users
    We only want end-users to have access to display , delete , release their OWN Jobs and not have access to the other users’ from SM37
    From the Roles in PFCG that have access to SM37 I have done the following:
    •Deactivated S_BTCH_ADM          (I don’t want them to have access to Manage Background Administration)
    •Deactivated S_BTCH_NAM          (I only want the user to view himself and not other users with entry “ *” or username )
    •S_BTCH_JOB                             (Gave the values RELE , DEL , List , Prot ) – I excluded Show as for reason not to have access to display others jobs
    With the above done I can still view the other end users’ background jobs.
    Any idea on how I can setup correct security measures for SM37?
    Thanks & Regards
    Marlon

    As far as I am aware, unless you want to modify SM37 then you should use SMX to restrict users to displaying (and managing) only their jobs.
    If you leave S_BTCH_ADM, S_BTCH_JOB & S_BTCH_NAM blank, users will still be able to see all the batch jobs but only manage their own.
    The screens are very similar between SM37 & SMX so your users shouldn't have too much trouble (though nothing would surprise me.......)

  • End user receving same mail , twice in a day .

    Hi,
    Throu this report , i am sending mail to a user. I the scheuld this program as background job.
    But My problem is end user receving same mail twice a day.I am sure , Program is executed onces in day.
    Plz help me to solve the problem
    REPORT  zplm008_tdr_mail_alert        .
    *DATA DECLARATION.
    DATA: it_ztdr TYPE TABLE OF ztdr WITH HEADER LINE.
    DATA  wa_maktx TYPE makt-maktx..
    *SELECTION SCREEN
    PARAMETER: p_date TYPE sy-datum DEFAULT sy-datum MODIF ID dat .
    *START-OF-SELECTION
    START-OF-SELECTION.
      SELECT * FROM  ztdr INTO TABLE it_ztdr
             WHERE  rlddt  = p_date.
      IF it_ztdr[] IS NOT INITIAL.
        LOOP AT it_ztdr.
          PERFORM send_mail.
        ENDLOOP.
      ENDIF.
    *&      Form  SEND_MAIL
          text
    -->  p1        text
    <--  p2        text
    FORM send_mail .
      DATA: lt_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                       WITH HEADER LINE.
      DATA:   ls_message TYPE char255.
      DATA: lt_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            lt_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            lt_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            lt_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            gf_cnt TYPE i,
            gf_sent_all(1) TYPE c,
            gs_doc_data LIKE sodocchgi1,
            gf_error TYPE sy-subrc.
          Adds text to email text table
      lt_message = 'Hi,'.
      APPEND lt_message.CLEAR lt_message.APPEND lt_message.
      lt_message = 'Requested design is released. Pls raise the TPR (If required to be ordered).'.
      APPEND lt_message.CLEAR: lt_message.APPEND lt_message.
      lt_message = 'Details of the released design:'. APPEND lt_message.
      lt_message = '*******************************'.APPEND lt_message.CLEAR: lt_message.APPEND lt_message.
      MOVE : 'TDR No '  TO lt_message.
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-tdrid   .APPEND lt_message.
      MOVE  : 'PED Part no '  TO lt_message.
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-matnr.
      APPEND lt_message.
      CLEAR: wa_maktx.
      SELECT SINGLE maktx FROM makt INTO  wa_maktx WHERE matnr = it_ztdr-matnr.
      MOVE 'PED Part Description' TO lt_message.
      lt_message+21(1) = ':'.
      lt_message+22(40) = wa_maktx   .APPEND lt_message.
      MOVE : 'PED Part Rev no' TO lt_message .
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-matnr_rv .APPEND lt_message.
      MOVE: 'Rnd part No  ' TO lt_message .
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-ref_matnr . APPEND lt_message.
      MOVE : 'Rnd Part Rev '  TO lt_message .
      lt_message+21(1) = ':'.
      lt_message+22(40) = it_ztdr-ref_matnr_rv .APPEND lt_message.
      CLEAR: lt_message.
      APPEND lt_message.
      APPEND lt_message.
      lt_message = 'To View the Design:'.
      APPEND lt_message.
      lt_message = '*******************'.APPEND lt_message.
      CLEAR: lt_message.
      APPEND lt_message.
      lt_message ='For Standard gauge, use Transaction: ZPED_TOOLPRINT'.
      APPEND lt_message.
      lt_message ='For Non-Standard gauge, use Transaction:  ZCV04N or CV04N'.
      APPEND lt_message.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    Fill the document data.
      gs_doc_data-doc_size = 1.
      DATA subject TYPE string.
      CONCATENATE 'Design Released for'  it_ztdr-tdrid  'of'  it_ztdr-ref_matnr
            INTO subject SEPARATED BY space.
    Populate the subject/generic message attributes
      gs_doc_data-obj_langu = sy-langu.
      gs_doc_data-obj_name  = 'TDREQ'.
      gs_doc_data-obj_descr = subject .
      gs_doc_data-sensitivty = 'O'.
    Describe the body of the message
      CLEAR lt_packing_list.
      REFRESH lt_packing_list.
      lt_packing_list-transf_bin = space.
      lt_packing_list-head_start = 1.
      lt_packing_list-head_num = 0.
      lt_packing_list-body_start = 1.
      DESCRIBE TABLE lt_message LINES lt_packing_list-body_num.
      lt_packing_list-doc_type = 'RAW'.
      APPEND lt_packing_list.
      CLEAR lt_receivers.
      REFRESH lt_receivers.
    Add the recipients email address
    For SAP mail
    IF NOT GSCR_UNAME IS INITIAL.
      lt_receivers-receiver = it_ztdr-reqnm.
      lt_receivers-rec_type = 'U'.
      APPEND lt_receivers.
    ENDIF.
    For external mail
    IF NOT gs_outtab-reqnm IS INITIAL.
       lt_receivers-receiver = gs_outtab-reqnm.
       lt_receivers-rec_type = 'U'.
       APPEND lt_receivers.
    ENDIF.
    Call the FM to post the message to SAPMAIL
      CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        EXPORTING
          document_data              = gs_doc_data
          put_in_outbox              = 'X'
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = gf_sent_all
        TABLES
          packing_list               = lt_packing_list
          contents_txt               = lt_message
          receivers                  = lt_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
    Store function module return code
      gf_error = sy-subrc.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Get lt_receivers return code
      LOOP AT lt_receivers.
      ENDLOOP.
      PERFORM initiate_mail_execute_program.
        CLEAR:lt_message[] , lt_message , gs_doc_data ,gf_sent_all,lt_packing_list[]
        ,lt_packing_list ,lt_receivers[], lt_receivers.
    ENDFORM.                    " SEND_MAIL
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          text
    -->  p1        text
    <--  p2        text
    FORM initiate_mail_execute_program .
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM

    Hi,
    In your code
    You are looping the perform in which you are calling below FM.
    LOOP AT it_ztdr.
       PERFORM send_mail.
    ENDLOOP.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = gs_doc_data
    put_in_outbox = 'X'
    commit_work = 'X'
    IMPORTING
    sent_to_all = gf_sent_all
    TABLES
    packing_list = lt_packing_list
    contents_txt = lt_message
    receivers = lt_receivers
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    So keep your FM after the loop.
    Pls. reward if useful...

  • How can i Create Dynamic mailing lists with Iplanet Delegated Administrator

    Hello people,
    Could anyone help me in this matter please?
    I am running IMS5.2 with Netscape Directory4.16. I need help about how to create a Dynamic Mailing list using de Iplanet Delegated Administrator, not using the traditional Netscape Console.
    If someone can help me, i will apreciate.
    bye.
    Azim Lakha

    In 24.4.0 there is no File|New|Address Book. There is File|New|Address Book Contact. How do I create a new address book ?

Maybe you are looking for