Ensuring the validity of an archived redolog

Hello everybody,
For security reasons I need to ensure the validity of an archived redolog. That is, after the online redolog get archived, I have to download it for a file system directory by using a script, but, there just must be archived redolog files. So how can I guarantee no other kind of file were put into the same location? Is there any way to characterize an archived redolog file using OS tools (Linux)?
Thank you in advance.

So how can I guarantee no other kind of file were put into the same location?That is not something that Oracle can enforce. You could setup permissions on the directory and have a "watcher" script scanning the directory periodically.
But to what purpose ?
I need to ensure the validity of an archived redologThis is a different question from guaranteeing that only redo log files are placed in a directory.
Do you mean to say that your requirement is to ensure that the redolog is not corrupt and/or is not tampered with ?
You could have a watcher script that computes the checksum (cksum is the command on Unix/Linux) for an archivelog and periodically compares the checksum value !
Is there any way to characterize an archived redolog file using OS tools (Linux)?You can use RMAN to attempt a backup of the archived redo log file --- if the file is not really an archived redo log, RMAN will complain.
Hemant K Chitale

Similar Messages

How can I determine the number and sizes of redologs?

Dear all,
How can I determine the number and sizes of redologs are sufficient to allow redo log switching while hot backup is in progress?
Please advice,
Amy

Two questions here - what the OP put as the subject title and what was asked in the thread, which are different questions.
I would interpret the question in the thread to mean "how to avoid hanging due to archiving waiting for a redo log group to become available." Alert log, wait events, and user complaints would be the source of information here.

Which table stores the valid City/State/Country combination for Customers

Hi,
I would like to know which table stores the valid city/state/country/county/provinces for Customer Address validation
Any helps please?
Thanks,
Genoo

Hi,
Please ensure to include your EBS version, so as to better provide assistance..
Please have a look at the doc as its explained in-depth:
Projects Uptake of the TCA Architecture in Release 12 [ID 417511.1]
Hope this helps,
Best Regards,

HTTPS SharePoint site with HTTPS Provider hosted app - The remote certificate is invalid according to the validation procedure

We have SharePoint 2013 site configured with SSL and we have developed a provider hosted app which interacts with SharePoint list.
If we try accessing the Provider hosted app from the SharePoint site with HTTP [http://mysharepointsite.com/] there are no any errors thrown.
But whenever the same Provider hosted app is tried accessing from the same SharePoint site using https address
[https://mysharepointsite.com/] we are getting below error:
The remote certificate is invalid according to the validation procedure.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[AuthenticationException: The remote certificate is invalid according to the validation procedure.]
System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) +2983172
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) +86
System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) +262
System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) +473
System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) +8530566
System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) +230
System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +645
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) +9
System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) +87
System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) +1467
System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) +84
System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) +22
System.Net.ConnectStream.WriteHeaders(Boolean async) +761
[WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.]
System.Net.HttpWebRequest.GetResponse() +8534156
Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() +58
Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb) +975
ProviderHostedHTTPSWeb.Default.Page_Load(Object sender, EventArgs e) +348
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3178
We have already added the certificate used for the SharePoint site and the provider hosted app in the SharePoint central admin trusts.
Any idea's how can I resolve this issue?

Hi,
According to your post, my understanding is that you failed to access provider host app using https.
The reason for this is that SharePoint implements its own certificate validation policy to override .NET certificate validation.
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
For more information, you can refer to:
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Restore with brtools - need more archive redolog files

Good day
I will make online backup my oracle database with brtools
(Oracle 10g, BRBACKUP 7.00 (39))
brbackup -c -d util_file_online -t online -m all -u /
bdztoexw anf 2009-01-23 15.27.40 ; 2009-01-23 16.47.21 ; 1 ............... 57 56 0 17671 226215105 17676 226268039 ALL
online util_file_online -
7.00 (39)
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.38
BR0232I 57 of 57 files saved by backup utility
BR0230I Backup utility called successfully
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.40
BR0340I Switching to next online redo log file for database instance VPP ...
BR0321I Switch to next online redo log file for database instance VPP successful
BR0117I ARCHIVE LOG LIST after backup for database instance VPP
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/VPP/oraarch/VPParch
Archive format %t_%s_%r.dbf
Oldest online log sequence 17673
Next log sequence to archive 17676
Current log sequence 17676 SCN: 226268039
Database block size 8192 Thread: 1
Current system change number 226268041 ResetId: 603135330
After brbackup I'll do "brarchive" in the same script:
brarchive -c -d util_file -sd -u / > $br_out_file
#ARCHIVE.. 17670 /oracle/VPP/oraarch/VPParch1_17670_603135330.dbf ; 2009-01-23 15.10.36 ; 43450368 226202112 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17671 /oracle/VPP/oraarch/VPParch1_17671_603135330.dbf ; 2009-01-23 15.36.12 ; 43430912 226215105 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17672 /oracle/VPP/oraarch/VPParch1_17672_603135330.dbf ; 2009-01-23 15.40.27 ; 43515904 226227928 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17673 /oracle/VPP/oraarch/VPParch1_17673_603135330.dbf ; 2009-01-23 15.41.06 ; 43729408 226238784 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17674 /oracle/VPP/oraarch/VPParch1_17674_603135330.dbf ; 2009-01-23 16.06.06 ; 43450368 226250315 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17675 /oracle/VPP/oraarch/VPParch1_17675_603135330.dbf ; 2009-01-23 16.43.40 ; 13243904 226263012 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
VPP util_file adztolzu svd 2009-01-23 16.47.22 ; 2009-01-23 16.54.47 ; 1 ........... 17670 17675 0 0 ------- 7.00 (39) @0603135330
BR0280I BRARCHIVE time stamp: 2009-01-23 16.51.11
BR0232I 6 of 6 files saved by backup utility
BR0230I Backup utility called successfully
BR0016I 6 offline redo log files processed, total size 220.128 MB
Then I take tape with this data and try restore only from this tape
all datafiles and relevant archive redologs files (17670-17675) restored without errors
but in the end ERROR occurred
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/VPP/sapdata1/system_1/system.data1'
ORA-00279: change 226268039 generated at 01/23/2009 16:43:40 needed for thread
1
ORA-00289: suggestion : /oracle/VPP/oraarch/VPParch1_17676_603135330.dbf
ORA-00280: change 226268039 for thread 1 is in sequence #17676
My online backup ended, before switch to redolog 17676
Why I need this file? I think files (17670-17675) should be enough?
Besides, the change 226268039 generated exactly at moment Switching to next online redo.
Can I try open database regardless of this error?
Thank you for your prompt response
Andrey Timofeev
Edited by: Andrey Timofeev on Jul 21, 2009 3:52 PM

Good day, sorry for TAG. Once more time. 
I will make online backup my oracle database with brtools 
(Oracle 10g, BRBACKUP 7.00 (39))
brbackup -c -d util_file_online -t online -m all -u /
<HR>
bdztoexw anf 2009-01-23 15.27.40 2009-01-23 16.47.21 1 ............... 57 56 0 17671 226215105 17676 226268039 ALL 
online util_file_online 
<HR>
 BR0280I BRBACKUP time stamp: 2009-01-23 16.43.38
<HR>
 
BR0232I 57 of 57 files saved by backup utility 
BR0230I Backup utility called successfully
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.40 
BR0340I Switching to next online redo log file for database instance VPP ... 
BR0321I Switch to next online redo log file for database instance VPP successful
BR0117I ARCHIVE LOG LIST after backup for database instance VPP
Parameter Value
Database log mode Archive Mode 
Automatic archival Enabled 
Archive destination /oracle/VPP/oraarch/VPParch 
Archive format %t_%s_%r.dbf 
Oldest online log sequence 17673 
Next log sequence to archive 17676 
Current log sequence 17676 SCN: 226268039 
Database block size 8192 Thread: 1 
Current system change number 226268041 ResetId: 603135330
<HR>
 
After brbackup I'll do "brarchive" in the same script:
brarchive -c -d util_file -sd -u / > $br_out_file
<HR>
#ARCHIVE.. 17670 /oracle/VPP/oraarch/VPParch1_17670_603135330.dbf 2009-01-23 15.10.36 43450368 226202112 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17671 /oracle/VPP/oraarch/VPParch1_17671_603135330.dbf 2009-01-23 15.36.12 43430912 226215105 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17672 /oracle/VPP/oraarch/VPParch1_17672_603135330.dbf 2009-01-23 15.40.27 43515904 226227928 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17673 /oracle/VPP/oraarch/VPParch1_17673_603135330.dbf 2009-01-23 15.41.06 43729408 226238784 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17674 /oracle/VPP/oraarch/VPParch1_17674_603135330.dbf 2009-01-23 16.06.06 43450368 226250315 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
#ARCHIVE.. 17675 /oracle/VPP/oraarch/VPParch1_17675_603135330.dbf 2009-01-23 16.43.40 13243904 226263012 1 
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............ 
#COPIED... ........ ... ................. .......... ........ ........... ............ 
#DELETED.. adztolzu svd 2009-01-23 16.51.11 
# 
VPP util_file adztolzu svd 2009-01-23 16.47.22 2009-01-23 16.54.47 1 ........... 17670 17675 0 0 
<HR>
#
<HR>
BR0280I BRARCHIVE time stamp: 2009-01-23 16.51.11 
BR0232I 6 of 6 files saved by backup utility 
BR0230I Backup utility called successfully 
BR0016I 6 offline redo log files processed, total size 220.128 MB
<HR>
Then I take tape with this data and try restore only from this tape 
all datafiles and relevant archive redologs files (17670-17675) restored without errors 
but in the end ERROR occurred
<HR>
 
ERROR at line 1: 
ORA-01195: online backup of file 1 needs more recovery to be consistent 
ORA-01110: data file 1: '/oracle/VPP/sapdata1/system_1/system.data1'
ORA-00279: change 226268039 generated at 01/23/2009 16:43:40 needed for thread 
1 
ORA-00289: suggestion : /oracle/VPP/oraarch/VPParch1_17676_603135330.dbf 
ORA-00280: change 226268039 for thread 1 is in sequence #17676
<HR>
 
My online backup ended, before swith to redolog 17676 
Why I need this file? I think files (17670-17675) should be enough?
Besides, the cange 226268039 generated exactly at moment Switching to next online redo. 
Can I try open database regardless of this error?
 
Thank you for your prompt response 
Andrey Timofeev
Edited by: Andrey Timofeev on Jul 21, 2009 4:53 PM
Edited by: Andrey Timofeev on Jul 21, 2009 4:54 PM

Can anybody explain the difference REDOLG vs ARCHIVE log files

can anybody explain the difference REDOLG vs ARCHIVE log files?
and the relation between redolog files and redolog buffers?
thanx in advance

Changes made to the database are recorded in the Redo log buffer. This Buffer contains Redo records or entries, which are a description of changes made to the database.
The Redo Logs are critical in order to recover the database or to reconstruct data files and undo segments after a system crash or hardware failure.
Each Oracle instance has only one log writer process (LGWR). The log writer operates in the background and writes all records from the Redo log buffer to the Redo log files. When the database operates in Archivelog mode, the redo logs are are archived before overwritten.

Archived redolog not applied in real-time : IN-MEMORY

I created a DataGuard configuratiion in Oracle 11g so that the archived redolog are applied in real-time using the log writer.
It seems to me that the last one is not applied : when consulting the v$archived_log table the last entry have the colunm applied to "IN-MEMORY" :
select THREAD#, SEQUENCE#,APPLIED, deleted from v$archived_log;
THREAD# SEQUENCE# APPLIED DEL
1 1935 YES NO
1 1936 IN-MEMORY NO
The Oracle 11g documentation say that if "IN-MEMORY" that mean not applied in the datafile.
Could someone help me to fix it ?
Why the last archived redolog is always "IN-MEMORY" ? Is there a way to change it ?

Please check the value of the column REGISTRAR and APPLIED for the logs in the standby database.
standby database:
select sequence#,registrar,applied from v$archived_log;
If REGISTRAR = RFS and APPLIED = NO, then the log file has been received but has not yet been applied.
If REGISTRAR = RFS and APPLIED = IN-MEMORY, then the log file has been applied in memory, but the datafiles have not yet been updated.
If REGISTRAR = RFS and APPLIED = YES, then the log file has been applied and the datafiles have been updated.
Try Cancelling the Managed Recovery Process and bounce the standby database

Warning: the given resetlogs_id is not on the valid incarnation path

I have a primary database (while standby is removed for now, since I got some issues), the drc log file shows below information, how to fix those issue?
Warning: the given resetlogs_id 780690997 is not on the valid incarnation path.
04/16/2012 12:35:26
"drcrwxcty1.log" 289909L, 19778849C 289828,1 99%

on Primary , alert log last entries are:
FAL[server, ARC3]: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance remeqa1 - Archival Error. Archiver continuing.
Tue Apr 17 07:45:35 2012
FAL[server, ARC5]: FAL archive failed, see trace file.
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance wxcty1 - Archival Error. Archiver continuing
DGMGRL shows following error on primary:
Error: ORA-16737: the redo transport service for standby database "wxctys" has an error
DGMGRL> show database wxcty LogXptStatus
LOG TRANSPORT STATUS
PRIMARY_INSTANCE_NAME STANDBY_DATABASE_NAME STATUS
wxcty1 wxctys ORA-03135: connection lost contact
wxcty2 wxctys ORA-03140: I/O operation in progress
on Standby alert logs shows:
RFS[106]: Possible network disconnect with primary database
Tue Apr 17 07:47:15 2012
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 4-4
DBID 1245181813 branch 780690997
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that's sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
------------------------------------------------------------

How to transport the validations, assignments, named searches, and workflow

Hi Experts
How to transport the validations, assignments, named searches, and workflow
between two repositories.
Thanks
Vickey.

Hi Vickey,
In MDM 5.5 you can use the Archive /Unarchive option for it
You can refer the below link:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20751e78-f81f-2a10-228f-eb3a16421b4d(Export/Import Schema)
Note:Export/Import schema can also be used for Transportation in MDM however as of MDM 5.5 the maps,validations and workflows cannot be transported.
From MDM 7.1 version onwards you can use the Export/Import Schema as well
You can refer the below link:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0dd1ae0-36e5-2b10-f8b4-e6365e643c0b
Hope It Helped
Thanks & Regards
Simona Pinto

Validation failed for archived log

Hi,
oracle database version 11.2.0.4
OS centOS 6.5
Recently i have set rman backup scripy on production Database, As we are using dbvisit for standby database for that we have set cron which run in every 10 minutes it generates archive and copy it to standby side,
but sometimes backup failed due to expected archive is not represent at location so i put "crosscheck archivelog all" in script now backup is running fine, But i have analyzed backlog file getting
"validation failed for archived log" the time stamp i have checked validation failed archive is current day and yesterday even though archives are present at the location and CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 14 DAYS;
Guys i am worried it shouldn't be a big issue for me,
please suggest what is wrong

This forum is for Berkeley DB high availability. We do not have the expertise to help you with your Oracle database 11.2.0.4 issue. You'll need to submit this question to one of the Oracle database forums to get the help you are looking for.
Paula Bingham

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

How to use the validation work in Both TAB and Mouse keys in Forms6i

Hi,
I have a validation script once it's validated it should execute the query.But using When-Validate-Item i can't use execute_query.I am able to use the validation in Key-Next-Item trigger but if the user moves the cursor using mouse then it's not working.
How to use the validation script working in Both Scenarios(Tab and Mouse keys).
Can anyone please give inputs to rectify the above issue?.

So you have multiple fields, but on at least one of them if it's valid you immediately want to execute the query?
You could create a hidden field in a control block Query_Now default 'N'. In a WHEN-VALIDATE-ITEM on your item, if it's determined to be valid, then set Query_Now to 'Y'.
In a WHEN-NEW-ITEM-INSTANCE at block level, check if Query_Now is 'Y'. If it is then execute the query (and set it back to 'N').

How to use the validation.xml in struts validation?

Can any one please help me, how to use the validation.xml in struts validation? possible please give me simple example.
Edited by: SathishkumarAyyavoo on Jan 31, 2009 12:03 PM

These 2 are the good articles for the beginners to do validation things in Struts. you can follow any one of them.
1. [http://viralpatel.net/blogs/2009/01/struts-validation-framework-tutorial-example-validator-struts-validation-form-validation.html]
2. [http://www.vaannila.com/struts/struts-example/struts-custom-validation-example-1.html]
All the best.

Ensuring the validity of an archived redolog

Similar Messages

Maybe you are looking for