Enterprise Remote Access only works as an administrator

Windows Surface Pro Tablet with Office 2010 loaded on it as well. IE 11 is the browser. All updates have been installed. Using a wired connection using a Surface Pro Docking Station. If the local administrator or the domain administrator are logged in, any
legitimate RD Web user can log into the server Apps without a problem. If these same users log onto the tablet with their credentials, then log into RD Web with their credentials and finally click on an App to run, they are challenged for their password again
and then the App will sit and spin, eventually stalling out and the user's app does not open.
I have spent the last couple of days working on this and it is getting a bit annoying. It seems like a permissions problem, in that the correct credentials needed are not being passed along to any users that are not either the local administrator or the
domain administrator. We have tried other users that are also in the domain administrator user group and they cannot open the apps when logged in as themselves. We even tried logging in as a domain admin user that had no RD Web credentials. Only two users
are allowed to use the Enterprise Remote Access RemoteApp and Desktop Connection - and nobody else.
And to clarify, a full-fledged RDP session works fine, but for security reasons we do not want to start enabling that for all tablets moving forward.
I am open to suggestions.
Thanx for reading,

Hi art.gibbens,
Thanks for your update, i would record this issue, we can expect this kind of potential issue can be fixed in future update.
Alex Zhao
TechNet Community Support

Similar Messages

Adobe Air Application only works using Super Administrator account on Windows XP

Good day
i really need some help. I developed air application that uses remote service, sql lite etc. It is working on my computer WIndows XP sp2. To test, i even created a guest account and it works fine. But when i deployed it to our client, the application doest work. Only the login page appears. I ask the it personnel there and ask if there are any restriction on the account of the user and said there is none because they are using Domain account. But when the super administrator is logged in, it works
Your help will greatly apprciated

Your help me, I iwill greatly apprciated
HELP MALAYSIA
Date: Thu, 21 Oct 2010 20:54:19 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Air Application only works using Super Administrator account on Windows XP
Good day
i really need some help. I developed air application that uses remote service, sql lite etc. It is working on my computer WIndows XP sp2. To test, i even created a guest account and it works fine. But when i deployed it to our client, the application doest work. Only the login page appears. I ask the it personnel there and ask if there are any restriction on the account of the user and said there is none because they are using Domain account. But when the super administrator is logged in, it works
Your help will greatly apprciated
>

Westell 7500 - can't remote access into work from laptops (desktop ok), no TiVO connection either

I successfully set up my "upgraded" Verizon DSL service and modem two weeks ago (have had internet connection on desktop and laptops since) but with that transition I lost the ability to remote access into my work computer from home and to have my TiVo connect to its server. I am just completely disgruntled at Verizon's request to pay them $89 for the tech support I need to get my new stuff working as well as my old stuff did - and I'm hoping someone out there can help me instead.
The computer help guys at work said the system at work's port is 3389 and TiVo's support website give as whole list of possible ports (http://support.tivo.com/app/answers/detail/a_id/402/c/105%2C109/r_id/100041). Is this issue something that can be resolved in the router's port forwarding window? Is so, how do I set that up correctly? If it's something else, please tell me what and how! I've read the Veralink 7500 User Manual and I just can't figure out what I'm doing wrong.
Thanks in advance for any help that's out there! And happy Father's Day to you... if that applies!

I solved the problems myself... and here's the solution in case anyone else would like to keep $89 in their pockets!
In both instances (remote access to work and connecting to the TiVO network), it is indeed the Port Forwarding feature you need to use in the Versalink 7500 router setup website (people will try to disuade you of this!). In both cases, I did the following just using different port numbers (depending on what I was trying to get my computer to talk to) and with my computer's firewall on and the router's firewall set to medium. Sorry I couldn't figure out how to post screen shots in this post... prepare to visualize!
1. On the "New Port Forwarding Rule" page, click on "create" for #1, pick "host" for #2, and then select the computer your router is connected to in #3 (it might work with one of the other computers selected, but mine worked with the device he router was connected to).
2. You need to do this step twice - first time select "direction" IN (in #3), second time select "direction" OUT. On the "Create Port Forwarding Service" page, you can name it whatever you want for #1, keep "port forwading" selected" in #2, in #3 you'll need to figure out (a) if you need to select TCP, UDP, or BOTH for "protocol" (based on the online or manual documentation for the system you're trying to connect with), (b) "global portstart" (c) "global startend" and (d) "base hostport" should also be found in the documentation (see note below for Windows remote access and TiVo port info that worked for me) and they are all the same number (ex., global portstart = 80, global startend = 80, and base hostport = 80), and then (e) select the direction (first time, in; second time, out... remember, computer communication is a two-way street, just like humans!), and (f) leave "port direction" as DST. Then you need to (g) click apply after you've added all the ports in both directions (my screen started this sequence of freaky flashy glitchy behavior, but apparently that was the fairy dust making the computer magic happen b/c when it was done, my connectivity was restored!).
3. The port that worked for me to remote access from Windowss PC to Windows PC was 3389.
4. This is the site that had the big list of ports for TiVo, but I think it was ports 80 and 8080 (see the first entry under the troubleshooting port issues) that made the magic happen for me: http://support.tivo.com/app/answers/detail/a_id/402/c/105%2C109/r_id/100041
I hope this is useful to some others and that you just saved yourself $89 in tech support charges for this irritating little issue... go buy yourself a drink and enjoy the summer!
Now I'm off to figure out how to back up these router settings based on the less-than-friendly-to-laymen-computer-users Versalink manual. Wish me luck!

Remote Control only works with Battery Cover

Hello.
I previously thought that my remote control for the Audigy 2 ZS Platinum did not work at all even after I went through the process of a clean hardware and software install.
I had noticed from the first time that I placed the remote on my desk that the battery compartment rattled but thought little of it until I could not get the remote control to function and began the troubleshooting process.
After replacing the battery with a fresh one, and the remote still not functioning, I decided to simply place the battery in the remote without the cover and voila, the remote began to work. I also tested it with the original battery that it shipped with, to be thorough, and discovered that it also worked. It appears that the cover prevents contact between the battery and the terminal inside the remote.
I hope this process helps another user and would like to know Creative's take on this situation and whether or not I can do a simple replacement via their warranty or if I have to send the remote in at cost to me for two weeks of testing first.

They should be able to just send a replacement, it sounds like that one is faulty alright.
The contact details for Customer Support (in the different regions) are:
Americas Customer Support
European Customer Support
Asia Customer Support
Cat

Citrix remoter access to work won't work, it keeps asking for Cocoa Java Plug-in, but this should already exist?

Helpdesk at work is helpless. My citirx connection to access work remotely connects fine, but when I try to login further it says that my browseer doesn't have Cocoa Java Plug-in. I've updated the software and have downloaded the update for Safari 10.6. But it stops. It also asks if JVM 1.4.1 or later is installed. I've updated that too.

You don't have a Mac Pro (*65lb tower) but a notebook.
There is a support page and setup wizard to help plus links to support articles and community.
you may have to rebuild mail index or see if you can export, (re)move the existing mail folder and setup a new one and import old mail. Mail does and can have its issues for sure.
Mail support and Setup Wizard
http://www.apple.com/support/mail
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forum
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Exchange Server 2013 and Remote Access VPN on a single server running Windows Server 2012?

Just by way of background, I have been installing and administering network servers, e-mail systems, VPN servers, and the like for many years. However, my involvement with Exchange and Windows Server has been mostly on the forensics and data recovery
level, or as a (sophisticated) user. I have never tried to deploy either from scratch before. My deployment experiences have been mostly with Linux in recent years, and with small private or personal "servers" running such cutting edge
software as Windows XP back when it was new. And even NetWare once.
When a client asked me if I could set up a server for his business, running Exchange Server (since they really want Outlook with all of its bells and whistles to work, particularly calendars) and providing VPN access for a shared file store, I figured it
could not be too difficult given that its a small business, with only a few users, and nothing sophisticated in the way of requirements. For reasons that don't bear explaining here, he was not willing to use a vendor hosting Exchange services or cloud
storage. There is no internal network behind the server; it is intended to be a stand-alone server, hanging off a static IP address on the Internet, providing the entirely mobile work-force of about 10 people with Exchange-hosted e-mail for their computers
and phones, a secure file store, and not much else. If Exchange didn't need it, I would not need to install Active Directory, for example. We have no direct need for its services.
So I did the research and it appears, more by implication than outright assertion, that I should be able to run Windows Server 2012 with Exchange Server 2013 on a server that also hosts Remote Access (VPN only) and does nothing else. And it appears
I ought to be able to do it without virtualizing any of it. However, I have spent the last three or four days fighting one mysterious issue after another. I had Remote Access VPN working and fairly stable very quickly (although it takes a very
long time to become available after the server boots), and it has mostly remained reliable throughout although at times while installing Exchange it seems to have dropped out on me. But I've always been able to get it back after scrounging through the
logs to find out what is bothering it. I have occasionally, for a few minutes at a time, had Exchange Server willing to do everything it should do (although not always everything at the same time). At one point I even received a number of e-mails
on my BlackBerry that had been sent to my test account on the Exchange Server, and was able to send an e-mail from my BlackBerry to an outside account.
But then Exchange Server just stopped. There are messages stuck in the queues, among other issues, but the Exchange Administration Center refuses now to display anything (after I enter my Administrator password, I just get a blank screen, whether on
the server or remotely).
So, I am trying to avoid bothering all of you any more than I have to, but let me just begin with the basic question posed in the title: Can I run Exchange Server (and therefore Active Directory and all of its components) and Remote Access (VPN only) on
a single Windows Server 2012 server? And if so, do I have to run virtual machines (which will require adding more memory to the server, since I did not plan for it when I purchased it)? If it can be done, can anyone provide any pointers on what
the pitfalls are that may be causing my problems? I am happy to provide whatever additional information anyone might like to help figure it out.
Thanks!

An old thread but I ran into this issue and thought I share my solution since I ran into the same issue. Configuring VPN removes the HTTPS 443 binding on the Default Site in IIS for some strange reason; just go and editing the bindings, add HTTPS and things
should be back to normal.

Cannot login to Cisco Jabber 10.5.1 over Mobile and Remote Access

Hi,
We have deployed sucessfully VCS Expressway-C and VCS Expressway-E with only 1 zone which is "Unified Communication Traversal" and is for Mobile and Remote Access only. VCS-C and VCS-E are communicating and in statuses everything is active and working. Also VCS-C can communicate with CUCM and CUP (both version 10.5).
Problem is when I deploy Cisco Jabber 10.5.1 on computer outside of LAN and without VPN it start communicating with VCS-E, ask me for accepting certificate (we have certificate only intenally generated on Windows CA) and after that it is trying to connect and after few seconds it will tell me that it can't communicate with server.
Did any of you had same problem or can you advice how to troubleshoot? In Jabber logs there is only something like "Cannot authenticate" error message, but when I startup VPN I can authenticate without any problems.
Thanks

On Expressway-C are your HTTP Allow Lists setup properly? By default, and auto discovered CUCM and IMP should be listed via IP and Hostname, but if not, you'll need to insert manually.
Also, you can look at the config file your Expressway-E would be handing out to Jabber via this method.
From the internet, browse to:
https://vcse.yourdomain.com:8443/Y29sbGFiLmNvbQ/get_edge_config?service_name=_cisco-uds&service_name=_cuplogin
Where:
vcse is your Expressway-E hostname (or CNAME/A record)
yourdomain.com is your own domain
The first directory is your Base64 encoded domain name, remove and trailing equal signs (=)
The XML returned is basically the DNS SRV record information available as if internal for _cisco-uds and _cuplogin
TFTP DNS SRV is optional if you configured TFTP in IMP for your Legacy Clients.

Remote Access Problem

HI
Just today, i started to get the following error from my ix2-200 Storcenter (non Cloud edition)
"The device is unable to acquire your external IP address. Confirm that your device is connected to a router which connects to the Internet."
When i try to reconfigure remote access, i get the following error message
"Remote access cannot be configured. Make sure your device is connected to a router which connects to the Internet"
I went through various checks and made sure my router is connected to the internet. Port forwarding for port 443 is open on my router etc and i made no change that would stop Remote Access from working as it was before today
When i try to reconfigure remote access, I also notice the following;
- My external IP address is stuck on an old IP. I have tried restarting, shutting down and rebooting, changing my internal IP to see if it would force the new external IP to show, but nothing has worked.
- I used to have 2 messages on the Remote Access page showing number of days left on DNS and SSL certificates. Now i just have one message showing days on "Remaining Certificate Subscription"
- When i click the Renew Subscription link it is is down (iomegalinkportal.com)
Im thinking the fact that iomegalinkportal.com is down is causing this, but appreciate if someone can look and tell me what the error is causing my problem and if it's not the link being down, how i can get the NAS to pick up the correct external IP address?
Rgds
John
Solved!
Go to Solution.

Could well be the 'old' iomegalink-stuff is no longer working or your router does not allow dynamic configuration by your NAS.
If you did not change anything to the router you should be able to https://<external-ip> .
( To determine external IP either check router config or use... http://www.whatismyip.com/ )
If the https-command on your browser brings up NAS startpage you may have alread reached 90%-success-mark.
All you then have to do is configuring your router to a dyndns service ( eg. dyn.com , for free as long as you log in once a month) and make a proper port forwarding to your internal NAS-ip-adress..........
If this is too techy, you should be able to find a friend in the neighbourhoud ;-) to lend you a hand for a try..
Or check some google nuggets like
' dyndns tp-link' http://www.tp-link.com/gr/article/?faqid=297
' port forwarding netgear' http://www.youtube.com/watch?v=VvzFHHDvU8E
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Desktop management and Remote access on OES 2 SP1?

I am preparing a migration of several servers from NW 65. SP6 to OES 2 SP1 Linux. One of those servers has ZENworks 7 Desktop Management/Middle tier server installed.
I am seeing statements in the documentation which make me wonder.... We use Desktop Management mostly for remote access, only now and then for inventory. I can live with the idea of doing a fresh install of ZENworks 7 desktop management following migration, and then importing the workstations anew.
I am planning on upgrading to ZENworks 10 later in the year. However, under the circumstances I am wondering if the migration might be a good time to jump to ZENworks 10 Configuration Management? I understand that Console1 goes away(?) but I do not understand what is to take the place of Console1.
Do any of you have experience with making that leap? What are the major considerations I should be looking at?

tkindig,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote access to Time Capsule won't work

Over the past couple of months I've been doing lots of research and planning into replacing my Mac Pro and old MacBook Pro with a new Mac setup. I was looking for efficiency, productivity and ultimate portability so the Macbook Pro Retina and Time Capsule grabbed my attention.
I was interested in the MacBook Pro Retina for work (travel) and home leisure use. Due to having so much music and video iTunes content, I was interested in purchasing a Time Capsule and a secondary external hard drive, placing all my iTunes content on the Time Capsule which I would then back up to the external hard drive when I was at home. I would then setup Time Capsule to be accessible over the internet so that I could view my media content through iTunes wherever in the world I was (internet speeds permitting of course). By doing this I could carry only my work files with me on the 512GB SSD Macbook Pro Retina, but could access the Time Capsule media files remotely, either via wi-fi or by tethering my iPhone 5.
So I purchased a Time Capsule to test my theory. I followed online guidance on how to achieve such a setup and using my 2008 MacBook Pro (which runs Snow Leopard) and a friends internet connection I got the system to work. I was able to remotely contact Time Capsule and watch High Def video content via wireless internet and even tethered to my iPhone. So I went and purchased a Macbook Pro Retina (running Mountain Lion) and set about setting up the system in the same way. But this is where something's gone wrong. I can't connect to the Time Capsule over the internet at all.
The Air Port utility has been updated to version 6 which is lacking the ability to instruct the Time Capsule to "Allow access over WAN". I thought I'd make sure it still connected via the internet using my old MacBook Pro, which had definitely worked perfectly just a couple weeks earlier, and that won't work either. I can't find the option to "Allow access over WAN" within Airport Utility 5.6.1 either? And the simple apple script application that I wrote (following an online guide) to open the remote connection to Time Capsule with the double left click on an icon has stopped working too.
I don't pretend to be a network engineer and I'm no I.T. expert, though I usually manage to teach myself what I need to know to sort issues like this out, but this has gotten me really stumped! I tried downloading an old version of Airport Utility to see if that had the "Allow access over WAN" feature (within the 'Disks' > 'File Sharing' area of Airport Utility) but my Mac OS won't allow the old versions to run.
Perhaps the version of Airport Utility I used on my Macbook Pro a couple of weeks ago didn't have the "Allow access over WAN" check box either and I just didn't notice - which is likely unless Airport Utility updates itself in the background without any prompts etc. I certainly didn't notice a software update for it any time over the past few days. Either way, I don't understand how it could have been working a few days back and now it's suddenly not.
I used this guides to gain remote access to Time Capsule successfully just a couple of weeks ago:
http://www.youtube.com/watch?v=SIQ7SzA1cK4
Can anyone shed any light on the issue and point me toward a fix please? I'd appreciate the help.

Thanks LaPastenague. I'm not sure if I have a static IP but I can confirm it hasn't changed in the past month.
I've pretty much come to the conclusion that what I want to do isn't really possible using Time Capsule. Like I mentioned, I had remote access working a couple of weeks ago but it seems like apple have updated the firmware or airport software to remove something that was necessary to remotely connect in the same way. And even if I did get it working I think it would still be so restrictive, requiring a fast wifi or mobile phone tethered connection to view my media files over the internet.
I got connected via iCloud and B.T.M.M. but the connection was very slow and video wouldn't stream well at all (painful). It seems that the speed constraints would make it very frustrating each time I simply wanted to look through my vast iTunes music collection or movie library. Album covers won't appear either.
Even if it were possible to connect via a static IP I just don't think that the WAN connection would be stable or fast enough to offer an efficint solution(?), so I'll probably have to by an external portable HD and use Time Capsule for Time Machine and Printer Sharing.
I wish I could stream my iTunes movies and music successfully over the internet, but right now it just doesn't seem possible.

Remote access vpn not working, VPNC client

Hi,
I have configured a remote access vpn client on cisco ASA 5520 with the following configuration. we are using cisco vpn client.
tunnel-group consultant type remote-access
tunnel-group consultant general-attributes
address-pool VPN
authentication-server-group RSA-AAA LOCAL
default-group-policy consultant
tunnel-group consultant ipsec-attributes
pre-shared-key *
group-policy consultant internal
group-policy consultant attributes
vpn-idle-timeout 120
vpn-session-timeout 720
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value access-spilt
access-list access-spilt standard permit host 10.101.50.60
One of the linux users is using vpnc and once the user connects to the vpn and the user adds a static route on the machine with the destination pointing to the vpn interface, for example 10.101.50.0/24, user is able to reach all the hosts in the subnet even though the access list on the firewall is configured for one host 10.101.50.60.
I did the same test on a windows machine, but was only able to reach the specific host allowed through vpn. why is the network filter not working for vpnc. please advise.
Thanks

Hi have solved the issue . enabling the demo 3DES & AES now my VPN is connecting
https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=139
thx to friend "Jennifer Halim"

Will the Apple Digital AV adapter work for the DISH Remote Access app?

I have a Sling adapter hooked up to my 722K DISH receiver, and the DISH Remote Access app installed on an iPad 2. Great app, btw.
What I'd like to know is if I'll be able to use this AV adapter to watch my recorded shows on a TV. Hotel room situation, and I would just like a larger screen every once in a while.
So far, my understanding doing some searches here is that the adapter will work for Netflix, but won't for HBO GO (bummer).
Since I'll be phasing out Netflix soon anyway, and this adapter isn't going to work for HBO GO content, I am just wondering if it will for the Dish Remote Access app before I bother to buy one.
If not, is there something that would be a better choice? I did look at the component and composite cables too, but couldn't quite make up my mind.
Thanks for any input.

iphone4 dont support mirror so only apps which support the normal tvout will work on iphone4 witht he hdmi out setup

No email thru Firefox for 24hrs. Checked V-Media, they remote-accessed my PC, IE worked OK. Assuming it must be Firefox.

I can't access my Virgin Media email thru Firefox since yesterday morning. Checked with V-Media, they remote-accessed my computer and opened up Internet Explorer, and were able to access my email just fine, so I have to assume the fault is with Firefox.
Can you help please?
I'm using Windows XP, been on Virgin Media for years, no problems to speak of, used Firefox for years, also no problems. This problem came out of the blue yesterday. Took ages for the mail client to open, then the emailes wouldn't open.

Terry, I'll try that when I can ("use basic HTML"). At the moment, it's stuck again at about 90% and won't let me in. I struggled this morning to get into Virgin Media forums (had to sign up, fill in passwords, all that bull), then the same at Firefox. I was so frustrated I ended up punching myself in the head. God know how people cope who aren't computer literate.
I had to enter about 20 different usernames because they were all, for some reason, "inappropriate". In the end, the only one that worked was my first name and my mother's maiden name. Totally crazy!
Then (after searching high and low) I couldn't find a link to get back into the forum to look for replies. Only saw yours because it got copied to my email address (which obviously I can only view in IE!).
At times like this, I'd take a shotgun to my PC if I had one.
If you manage to get to the bottom of this I'd appreciate it if you'd send me a quick note. I'll do the same for you, naturally.
Cheers, mate.

HT1947 I had this app on my IPhone 4S and never had a problem. Now on my IPhone 5 it only works sporadicly. If I do a hard reboot it will access the Apple tv but on most occacciosn it does not connect. Any one else?

I had this app on my IPhone 4S and never had a problem. Now on my IPhone 5 it only works sporadicly. If I do a hard reboot it will access the Apple tv but on most occacciosn it does not connect. Any one else?

Do you mean the Remote app?
This app requires both devices be connected to the same Wi-Fi network, are they?

Enterprise Remote Access only works as an administrator

Similar Messages

Maybe you are looking for