Envy 17-3070NR Linux Audio Driver

Hi, What audio chipset is being used in the Envy 17-3070NR? Is there a Linux driver for the audio hardware device(s)? I am able to boot Ubuntu and several other recent linux distro's but none of them seem to have an integral audio driver that works with the audio chipset in this laptop. So what device is it and/or where might I find a linux driver?

FWIW I just got my envy 17t-3000 audio to work.
It turns out I have 3 audio devices (hdmi, analog-internal, and a usb) Things get wonky with all 3 loaded and as I'm not using the wirelss audio device I've put snd_usb_audio into my /etc/modprobe.d/blacklist.conf file and Now I can get the internal speakers to work.
Note: I still had to fiddle with the audio manager to get it working. but its working ok now. (ubuntu 11.04 + linux 3.2.3 vanilla kernel)
--mark

Similar Messages

Envy 14-3017NR no Audio Driver After Recovery Install

Hello,
I'm looking for a help. I have performed a clean install of Windows 7 trough booting into HP Recovery Manager (F11 thing). It installed the OS and all other drivers seems to be OK except there is no driver for the audio at all (none of the built in speaker or jack-output will actually work).
I've been trying to install the audio driver from HP Support & Drivers page, from the HP recovery manager software. I have also tried to install multiple times the Intel chipset driver and then attempting the audio driver installation.. No success.
Moreover, I cannot seem to find the Beat's audio interface that was installed initially after unboxing the machine. The beats and trackpad-locking lights are also not functional on the laptop body itself... Am I missing something or what? Your response would be much appreciated! Thank you.
I'm attaching an image of the error I'm getting when installing the driver trough HP Recovery Manager software.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp57001-57500/sp57195.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then perform a hard reset for your Model as detailed in the document Here.
Next, tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP ENVY TS 15 Notebook PC: Problems installing audio driver (High Definition Audio device)

Hello all,
My product is the HP ENVY TS 15 Notebook PC.
Product number: E3B65PA#AR6
OS: Windows 8.1 64-bit
A few days ago, I upgraded my windows from windows 8 to windows 8.1 and found that no sound coming from the HDTV when connecting my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. I have checked the HDMI cable and it is working fine with other laptop.
Device manager is showing 2 device :
High Definition audio device ( Showing yellow traingle)
IDT High Definition Audio CODEC
When I am opening the properties of High Definition audio device it is showing :
This device cannot start (code 10)
{Operation Failed}
The requested operation was unsuccessful.
If anyone knows how to fix the problem, please help me
thanks in advance
This question was solved.
View Solution.

Hi:
The IDT audio driver (notebook speakers) appears to be working fine.
The problem is probably with the Intel graphics driver which controls the HDMI audio.
My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208...

HP ENVY TS 15 Notebook PC: Problems installing audio driver

Hello all,
My product is the HP ENVY TS 15 Notebook PC.
Product number: E7Z34UA#ABA
OS: Windows 8.1 64-bit
A few days ago, I opened my laptop to find that there was no sound coming from the speakers at all. I was completely baffled because the audio was working perfectly fine before, even after upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. Now, however, when trying to update the IDT driver, it says that a device attatched to the system is not functioning. What do I do?
I have provided screenshots of things that appear when I try to fix this issue.
This question was solved.
View Solution.

Hello skyeisthelimit. I understand there is no sound produced by the notebook. Based on the description, I believe that the issue is software-based. However, I'm not going to eliminate faulty hardware from my mind. You have attempted some troubleshooting, which is great. I am going to provide some troubleshooting as well (certain steps you already completed). Please follow all troubleshooting in the order I suggest:
First, there is Microsoft Wizard Tutorial that troubleshoots sound issues in Windows 8.1. Please follow the wizard until it is finished. You can locate this wizard here: http://windows.microsoft.com/en-CA/windows/no-sound-help#no-sound=windows-8&v1h=win8tab1&v2h=win7tab...
Second, follow all of the troubleshooting, suggest in this HP document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03257712
Eventually, you will be asked to reinstall updated drivers. Please install this one: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...
Assuming the issue is not resolved, the next step is to refresh Windows 8. This will force the computer to return to Windows 8. It will also clean up the computer, to a certain extent (it is not as powerful as a recovery). For more information on how to refresh Windows, please reference this Microsoft document: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc
If refreshing the operating system does not resolve the issue, reinstall the operating system is the next step. Ensure you backup all of your data beforehand.
For information on how to effectively backup your computer, please reference this document: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03270359
For information on how to perform a system recovery, please reference this document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03489643
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

No audio from HDMI output because High Definition Audio Driver cannot start (Envy 17 Quad)

Ever since I first bought this laptop two months ago, the audio from the HDMI output has always been inconsistent. I remember it working a couple times, but there were more times when my audio driver didn't recognize that an HDMI cable was plugged in. Yes, I tried all the obvious: shutting down computer, checking disabled devices in Playback Devices, reinstalling drivers, etc. Now, when I plug an HDMI cable in, the video comes out fine but the IDT High Definition Audio CODEC does not recognize HDMI/my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall nor find a download from HP's website. How can I get audio through HDMI to my TV??
This question was solved.
View Solution.

Hi,
Please try:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

ATI Catalyst 8.5 Proprietary Linux Display Driver released

New ATI Catalyst™ 8.5 Proprietary Linux Display Driver was released the day before yesterday and according to release notes it has many improvements.
New Features
This release of the Catalyst™ Linux software driver introduces Mipmap Detail, Catalyst A.I., and AA Filters in the 3D ORCA page of the Catalyst™ Control Center Linux Edition.
Resolved Issues
* The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
* Support for video playback on the second head in dual head mode is now available. Further details can be found in topic number 737-26985
* Unresolved symbols in Xorg log under RHEL 4u6 32 and 64 bit no longer occur. Further details can be found in topic number 737-34284
* The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-34285
* Change VT no longer fails when kernel module is not loaded. Further details can be found in topic number 737-34286
* Switching to the virtual terminal multiple times no longer results in X displaying corruption. Further details can be found in topic number 737-34287
* Catalyst Control Center: The Preference page is now localized for all supported languages. Further details can be found in topic number 737-34275
* The Linux kernel module is no longer installed to wrong location if the Linux kernel is updated. Further details can be found in topic number 737-34288
* Random system hangs no longer occur when calls to the ATI driver are made from Ring3. Further details can be found in topic number 737-34289
* X window no longer fails to respond when GoogleEarth is maximized. Further details can be found in topic number 737-34290
* A segmentation fault no longer occurs when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34276
* Enabling Composite extension no longer displays 8x AA for graphic cards that do not support 8x AA under the Ubuntu 7.10 operating system. Further details can be found in topic number 737-34291
* Display corruption is no longer noticed at logon when compiz is enabled. Further details can be found in topic number 737-34292
* Launching the glxgears application no longer results in segmentation faults. Further details can be found in topic number 737-34293
* GoogleEarth: Launching the application in horizontal mode on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-34293
* Specviewperf 8.1 64 bit version: Segmentation faults no longer occurs on IGP systems. Further details can be found in topic number 737-34294
* Maya 2008: Moving the render window no longer results in the operating system failing. Further details can be found in topic number 737-34295
* Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-34296
Known Issues
* The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
* Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
* SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center but does not apply to the TV display output. Further details can be found in topic number 737-34297
* Running X server without a window manager may result in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-34298
* Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
* Corruption may be noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
* Quake 3 Arena (demo): Segmentation faults may occur when attempting to play the game. Further details can be found in topic number 737-34302
* Specviewperf: Launching the application may result in the Linux operating system failing to respond. Further details can be found in topic number 737-34282
* Opening a terminal and running semi-automated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-34283
* A segmentation fault may occur when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34319
* FGL_GLXGEARS or GLXGEARS: X may fail to respond when launching either of the applications. Further details can be found in topic number 737-34316
* Maya 2008: Various comparison failures may be noticed. Further details can be found in topic number 737-34277
* The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-34317
* DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
* SPEC Viewperf 8.1: A performance drop may be noticed when running the application under Linux. Further details can be found in topic number 737-34279
* Maya2008: The hardware render buffer may fail to render/display the image. Further details can be found in topic number 737-34280
* May2008: The hardware render Perl script may display an error message when rendering. Further details can be found in topic number 737-34281
I wonder when it will appear in Arch's repositories

Yea, it would be great as at Phoronix forums some people are reporting 10% performance increase in games
EDIT: Some release notes from AMD
New Features
This release of the Catalyst™ Linux software driver introduces UYVY and YUY2 pixel format support. This support provides interleaved stream support for video playback applications such as TVTime and MythTV.
Resolved Issues
The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
*Enemy Territory: Quake Wars: Playing the demo on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-35208
*Maya 2008: An incorrect colormap is no longer displayed for texture selector on systems running X. Further details can be found in topic number 737-35207
*Quake 3 Arena (demo): Segmentation faults no longer occur when attempting to play the game. Further details can be found in topic number 737-35206
*Quake3: Corruption is no longer noticed when changing the display resolution when the game is running. Further details can be found in topic number 737-35209
*SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center and now gets applied to the TV display output. Further details can be found in topic number 737-34297
*Running X server without a window manager no longer results in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
*Clock Gating is now supported and enable under the Linux operating system. Further details can be found in topic number 737-35191
*The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-35192
*Using the wrong delimiter in aticonfig --set-dispattrib=<disp>,<attr>, <value> no longer results in a segmentation fault. Further details can be found in topic number 737-35194
*Audio out is now functioning after the installation of the ATI graphics drivers for Ubuntu 7.10. Further details can be found in topic number 737-35196
*Bandwidth corruption is no longer noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Playing a video clip using mplayer with the Xv extension enabled no longer results in an error indicating that Xv could not find a free Xv port. Further details can be found in topic number 737-35198
*Corruption is no longer noticed when enabling Big Desktop on systems containing an ATI FireGL X1 series of product and running X. Further details can be found in topic number 737-35199
*Running the X server generations test no longer results in the operating system failing to respond or a Kernel panic to occur after first server generation on SuSE 10.3 64 bit. Further details can be found in topic number 737-35200
*Attempting to resize a 2D application window no longer results in poor performance being noticed when composing is enabled. Further details can be found in topic number 737-35201
*Screen flicker is no longer noticed after running amdcccle in X. Further details can be found in topic number 737-35202
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-35203
*Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-35204
*Starting glxgears and/or fgl_glxgears no longer results in the gears failing to render on SuSE 10.2 x86_64. Further details can be found in topic number 737-35205
*FGL_GLXGEARS or GLXGEARS: X no longer fails to respond when launching either of the applications. Further details can be found in topic number 737-35210
Known Issues
The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-35219
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
*Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI *Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
*Setting the Overscan to an invalid value may result in segmentation faults. Further details can be found in topic number 737-35211
*An incorrect error message may be returned when applying an unsupported TV geometry in a console terminal. Further details can be found in topic number 737-35212
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-35213
*An X segmentation fault may occur when launching SUZI/textured video. Further details can be found in topic number 737-35214
*Creating two successive connections may result in direct GL context to fail. Further details can be found in topic number 737-35215
*Moving the mouse or tapping a key may fail to close an OpenGL screen-saver and bring the user back to the x desktop. Further details can be found in topic number 737-35216
*The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-35217
*Opening a terminal and running semiautomated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-35218
Last edited by Zibi1981 (2008-06-19 15:42:23)

Latest SoundMax HD Audio Driver is Very Static

I had a botched install of Windows and redid everything with all the latest drivers from the website. However, the newest audio driver has a very pop or crackle that occurs when playing music from any program or source including youtube, audacity, winamp, media player (both audio files and video files). Is there any way to correct this? I've had a lot of trouble with the audio driver specifically for a very long time and was hoping to get some guidance on this before I attempt to uninstall and switch back to the original audio driver. And just to add, this problem seems to happen only when docked to my advanced mini dock. When I use the built in speakers or headset, there's no static.... so I'm not quite sure what is going on here...
Message Edited by singularity2006 on 05-08-2008 12:10 AM
T61_Wide | Model No. 7662 - CTO
Core 2 Duo T7250 | 2GB OCZ DDR2-800
82566MM Gigabit | 4965AGN Centrino Pro

personally I'm not a big fan of the SoundMAX suite on the Touchsmat PC. I bought a creative 5.1 USB card and has plenty more features including better overall sound performance.
Here's more info on it http://us.creative.com/products/product.asp?category=1&subcategory=208&product=17751
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Windows 8.1 IDT High-Definition (HD) Audio Driver

I was cleaning up my programs and accidently uninstalled IDT High-Definition (HD) Audio Driver. This caused my Beats audio to be uninstalled as well. Is there a way i can get it back? I have tried installing IDT High-Definition (HD) Audio Driver from Hp links but it keeps saying "The hardware detected is not supported by this IDT software package. The install will be aborted." Please help.

Hi,
Version 6491 is newer than 6486.
You should have the Beats audio applet in control Panel. The driver includes the Beats audio software. You should have full functionality. Reboot your system and check Control Panel.
My system is a fairly new HP Envy 810-150se. The latest IDT audio codec for my system is 6486.
Where did you obtain Beats version 6491?
Jaco
Errare humanum est.

IDT High-Definition (HD) Audio Driver

The IDT High-Definition (HD) Audio Driver for the HP ENVY 15-j121tx Notebook PC (ENERGY STAR) is not compatable with Windows 10 Tech Preview, if you install this driver it will make the microphone inoperatable, If you just use the windows driver the microphone works perfectly. Can HP get onto this issue & make it compatable with Windows 10 please.

HI
>>please fallow the link
No Sound from the Speakers (Windows 8)
Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
I am an HP employee

Audio crashing - IDT HD audio driver problem?

Audio crashes when in use (basically just goes silent), even after re-install of driver (IDT HD Audio Driver). Upon reboot of the PC, audio will work temporarily, and then crash very quickly if there are multiple Chrome tabs with audio, and has also crashed using just a single media player (Spotify). I have not received any error messages. When this happens, I am also unable to change the volume level using both point-and-click and hotkeys. I'm running an HP Envy notebook with Windows 8.1 64 bit
This question was solved.
View Solution.

Hi @AL006600
Welcome to the HP Forums!
It is a grand place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you are having an issue with your audio. There has been a recent update that has been causing some audio issues. Here is a link to No Sound from the Speakers (Windows 8 that should help you overcome this difficulty.
Have you ran the HP Support Assistant to aid with HP updates?
Have you ran the Windows troubleshooter? Using automated troubleshooting (Windows 8)
If this has not helped please provide your exact model of HP notebook.
How Do I Find My Model Number or Product Number?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

MSI P4M900M2-L ~Realtek High Definition Audio Driver Issue Resolved In XP!

Realtek High Definition Audio Driver Issue Resolved! MSI P4M900M2-L Intel Dual Core VIA P4M900 Chipset 8 CH Azalia Audio.
There is an issue w/ the Realtek High Definition Audio Driver for the MSI P4M900M2-L Intel Based Dual Core Via P4M900 Chipset based Motherboard w/ MS XP Home Premium Installed (Vista driver installs fine as I have built 4 of these in the last week, but the XP Audio driver doesn't).
I could not get either Audio driver from the CD driver disk nor the MSI site to install w/ Win XP Home installed. Live Update for that Motherboard does not contain the Audio Driver either.
After 3 days and multiple attempts to use MSI's very wanting (in my opinion), Technical Support forms and call-in line, I hunted, and hunted and found the driver(s) on CNET. They not only work great but as designed. I had almost given up and I actually installed an add-in sound card....But this is a machine for a customer. Then I searched again and found a real solution.
Realtek High Definition Audio Drivers are located on CNET.com's download page:
Win2K,XP,2003,XP Pro & XP64bit=
http://www.download.com/Realtek-High-Definition-Audio-Codec-Windows-2000-XP-2003-XP-Professional-x64-Edition-/3000-2120_4-10788584.html?tag=dl.2
Vista=
http://www.download.com/Realtek-High-Definition-Audio-Codec-Windows-Vista-/3000-2120_4-10788600.html?tag=dl.1
Good luck to everyone, this will save you RMA'ing those boards over a stupid Audio driver issue, as they are great w/ the Intel Dual Core 775 CPU's from 2.0~3.0Ghz. Can't really tell the difference between the 2 CPU's w/ the Dual Core Program running (a utility supplied on the driver disk or on the Driver site!) I have built both..2 of each.
Cglrcng

Drivers are from Realtek, why search them elsewhere?
High Definition Audio Codecs: Version R1.85
www.realtek.com.tw
Downloads
Computer Peripheral ICs
PC Audio Codecs
High Definition Audio Codecs
Software
Downloadable from tree different ftp-sites, in exe or zip format.
Even linux drivers are available.

HP Envy TouchSmart Ultrabook 4 Audio Failure

My computer won't play sounds at all (videos online, downloaded music, games on my computer, everything).
This doesn't happen all the time. I'm not sure but I think it usually happens when I use my computer for a long time (1-2 hours). It starts working again when I restart my computer but it stops working later and I have to restart my computer again.
I was wondering if there was a solution and if there's a reason why my audio isn't working.
This question was solved.
View Solution.

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Beats Audio Driver for 4-1130us ultrabook

Hello,
Recentel installed Win 7 on my notebook.
I seem to have lost the Beats Audio driver and cannot locate it under the drivers...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=ca&dlc=en&sw_lang=&product=5318...
Can someone please help me?
Also the light above my Mute button (fn F11) does not work either.
thanks in advance
John
This question was solved.
View Solution.

Hi, John:
See if this audio driver works.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
You may need to install the quick launch software for the other issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en...

G510 audio driver installation problem on Windows 8.1

I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.
Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.
Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.
How can I say which audio chipset is installed and install the correct driver?
Solved!
Go to Solution.

hi mikolajek,
Welcome to Lenovo Community Forums!
Under Device manager
You should look for your Audio
Normally it stays under Sound and gaming controller,
And if no driver is installed in shows as High Definition Audio
Right click on it and select Properties
Go to the Details TAB
change the Value to Hardware ID then check the details
ex. PCI\VEN_14E4&DEV_4727&SUBSYS_051014E4&REV_01
Get the 4 digit after VEN and DEV
Ven is the Vendor and Devi is the Device
Go to PCI database and do a search for the VEN
Then search for the DEV and youll know that device
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo G560 ... AUDIO DRIVER FOR WINDOWS XP ..

Iam using Lenovo G560 laptop for 8 months.. but just now , i formatted my system and installed WIndows XP and Windows 7... . but iam not able to install conexant audio driver on windows XP ...when i tried to install ...it says "problem with audio media" .. so anyone plzzz help me out of it sir....

try this driver
ps: new bios is available for your device.
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_3839.html

Envy 17-3070NR Linux Audio Driver

Similar Messages

Maybe you are looking for