Equivalent of Attribute ITS_DEST in SRM 7.0

Hi All,
What is the equivalent of atrribute ITS_DEST in SRM 7.0 . This attribute was used in SRM 5.0 as a logon link in the offline approval mail.
In SRM 7.0 my offline approval mail has got a link in it and when user click on that link it should take them to the SRM 7.0 system. Currently the link that is genearted is wrong. As far as i know that the attribute ITS_DEST is absolute in SRM 7.0 , then from where the system is generating the link.
or do we need to maintain that attribute in SRM 7.0 system too ?
Thanks
Iftekhar Alam
Edited by: Iftekhar Alam on Sep 17, 2010 4:51 PM
Note : I use report /SAPSRM/OFFLINEAPPROVALSEND to send my offline approval mail.

Hi All,
Please follow the below thread for the resolution.
Re: Wrong hyperlink in /SAPSRM/OFFLINEAPPROVALSEND mail
Thanks
Iftekhar Alam

Similar Messages

Problem with edit attributes of user SRM 4

Hi folks,
I have an inhirited purchasing organizatioanl (PO) that is disabled. but i'm facing i problem when i execute the function module RH_OM_ATTRIBUTES_UPDATE to add new purchasing organizatioanl.
my problem is : it enables the inhirited PO mentionned above.
How to solve this issue.
thx in advance.
Best regards.

hello ,
Did u try RH_OM_ATTRIBUTES_INSERT.
It also enables inhirited ones
Regards,
Neelima

Problem in SRM (with backend PO)

Hi,
I have a problem in creating a PO with backend product category in backend. The error message is some backend documents could not be determined.
But I could able to create a PR Reservation and Direct PO for the same Product Category. (in the backend and in SRM too).
Org Structure:
I have maintained the transaction type in attribute tab. (backend/EC).
I have maintained the Product Responsibilties and Org Responsibilities for the Respective Pgrp. (Product Cateogeries)
I also have maintained the Product Categories in Extended attributes.
In SRM I havent maintained the transaction type for the EC but I have maintained the follow on document number range. (shopping cart)
The Transaction Type is maintained in the backend and the number range as external.
I have also maintained the Product categories in Technical Basic settings and defined the backend system with respect Product categories in Cross application basic settings.
Please let me know if you need any more information...
Thanks
Jagan

Hi Jagan,
If your SC is considered as complete by SRM (but with a fixed vendor and not a preferred vendor) the system will check if it can create a PO in R/3.
For this, each item will request a META_INTERPRETE_DATA to R/3, asking if it can create a PO. If R/3 considers this data as incomplete, it will reply to create a PR.
Usual cases of R/3 PR creation instead of PO:
- prefered vendor in SRM (and not a fixed one)
- custom checks in user exits in R/3
- error messages in R/3 (ex: O6 334 In the case of a fixed vendor, please enter info record)
Kind regards,
Yann

Error IN SRM CONTRACT Creation

Hi,
When i am executing the fucntion module 'BBP_PD_CTR_CREATE', it is showing the error 'Incorrect Interface Data for set 78 in method C'. What could be the problem?
Please help.

Hi
In ECC, When you procure services, system expects you to put a Account assignment category . So when you are creating a contract for a service(item category D), you either specify the account assignment details in the Contract. If you dont have one right now, configure Account Assignment Category U(Unknown) in SRM and map it to ECC Account Assignment Category U.
On using U as account assignment category you will not be required to enter other account assignment details in the contract,
Setting up Unknown account assignment can be done as follows:
1. Create Account Assignment Configuration in ECC which you have already completed.
2. On the IMG Path in SRM: Path:IMG --> SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Account Assignment --> Define Account Assignment Categories:
a. Create SRM Account Assignment Category and map it to the respective Backend Category.
3. Assign the new account assignment category in the Attribute KNT in SRM Org Structure
After that user will be able to select that category in the SRM Application DOcuments
Regards
Virender Singh

SRM-MDM Catalog publication in portal

Hi experts,
Iu2019m facing some difficulties concerning MDM / portal integration. We are implementing SRM-MDM catalog scenario and Iu2019ve already created a catalog in MDM Data Manager. Iu2019ve also set the parameters for the web service definition in SRM system, and assigned the Catalog ID in ppoma_bbp.
However, Iu2019m still not able to access my catalog information in portal. When I try to access my catalog it is necessary to introduce again the logon details and an error message u201CLogon failedu201D is displayed, which is not normal right?
In addition, if I introduce my logon details nothing happens but the error message is changed for a warning message u201CLogon failedu201D. Consequently I cannot access my catalog in portal.
Can someone help me? What might being wrong with my catalog publication?
Many Thanks!
Best regards,
Andreia Nascimento

Hi,
Yes, You can define any user which has "Catalog User" Role defined in MDM in SRM Web Service". and this is not required to have same user in SRM system. You can assign this web service ID as attribute to any SRM user.
Did you get "Connection Successful Message"?? I couldn't see that in your Trace.. Once you test Connection then you should get message in Green "Connection test was successful".
Also, Check the following Things and revert with the result:
1. Is your repository Loaded?
2. Try to Console through the User which you have defined in Web Service. This will confirm whether User credentials are correct or not.
Also, let us know which version of SRM you are working with and what is version of your SRM-MDM Catalog.
Regards,
Shiv
Also Check this document (Page no 32 ) and make sure if you have defined other parameters correctly in the web service definition.
https://websmp103.sap-ag.de/~sapdownload/011000358700000134212010E/srm_mdm_integration.pdf
Regards,
Shiv
Edited by: Shiv Prashant Dixit on Mar 5, 2010 11:32 PM

SRM-MDM catalog custom field

HI,
We are loading external supplier item in out SRM-MDM 3.0 catalog. Soem of the Items have additonal field which desbite the item in more detail (like length, color and so on). During the import we can easy add the field as attribute and see in the datamanager.
But whats about the SRM-UI. Is there a way to get the attribute field in the UI or do I really have to extend the repository ?
Regards,
Bernd

Hi,
As mentioned by Mark, you can easily make attributes available on SRM-MDM Search UI by configuring the UI applications.
I would like to add to Mark's statement that you should have Role "UI configuration manager" assigned in MDM to configure the UI interface.
Also, link for UI interface will be as follows: http://<Java WEB AS>:<Java Port>/SRM-MDM/SRM_MDM
Open this link in a browser, connect to MDM server and catalog repository using user which has "UI configuration manager" role assigned in MDM. for example, Master, and complete the UI configurations.
Revert if any questions.
Best Regards,
Shiv

Attribute Asset (AN1) - Need real time business Scenario.

Hello Gurus,
I haven't worked on a scenario in which there's a need to use the attribute AN1-Asset. I want to know any of you have can share your experience in working with any client & using this attribute to connect to ECC FICO.
3rd attribute in this link - Attributes for the SRM Scenario - Creating the Organizational Plan - SAP Library
Early thanks a lot for your knowledge share & the efforts.
Regards
Roopa

SAP - SRM > PPOMA_BBP - Attributes in SAP SRM.

Storage Location in SRM

Hello,
We are on SRM5.0 and I want to know where the storage locations are stored in SRM and the storage location address.
Thanks!

Hi Antoinette,
The Storage locations get replicated to SRM system when their respective plants get replicated.
They get replicated to SRM system from ECC system using a programme - BBP_LOCATIONS_GET_ALL or BBP_LOCATIONS_GET_SELECTED or BBP_LOCATIONS_GET_FROM_SYSTEM.
The same can be seen under Extended attributes in the SRM organization structure under locations and the Storage locations will get replicated under Storage locations tab of Extended Attributes.
You can check and maintain the same from the search help.
You can check all the Plants replicated to SRM system in BBP_LOCMAP table.
If all the plants get replicated successfully then all the storage locations assigned to that plant will get automatically replicated to SRM system.
Please let us know in case of any further clarifications.
Regards,
Teja

Calling transaction MB03, ME53N and ME23N in SRM (Suppliers Relationship M)

Hi Experts,
I would like to ask if there are any ways or possibilities that I can call the transactions MB03, ME53N and ME23N in SRM system?
Those transactions mentioned are in ERP and there's a report program that displays the list of PO/GR/PR numbers in SRM and once the user doubled-click in one of those doc. numbers.. those transaction should be called..
How can I satisfy this criteria? Is it possible even if those transactions are not found in SRM system? Do we have the equivalent of those transactions in SRM?
Thanks in advance!

Hi,
I propose you to learn from this easy weblog.
I have tested it and it works.
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-its-webgui-application-in-sap-netweaver-04-abap-edition--nsp
The only variant here is that you will have to doit in ECC or R/3 and then add this to a transction directly in SRM PFCG.
Be careful, webgui transaction requires 10 times more bandwitch than sapgui.
Kind regards,
Yann

Catalog Mgmt

Have a few conceptual doubts in Catalogs Management.Please share your views:
1.]Is OCI some standard that both EBP as well as the vendor uploading the catalog has to follow??I understand that it describes the data exchange between EBP and external catalog application but does every company have its own OCI standards?Who decides the fields and how is it communicated to the vendor? Any clear explanation on how the flow works?
2.]Should all the products that show up in the catalogs be in the EBP product master as well??
3.]One of the sources to shop from(other than catalogs,description and old PO template) is the 'internal goods/services from EBP product master.Are the products in this source not catalogued?
4.]From SRM Doc:"In order for Requisite BugsEye to send items from its shopping cart to the external system via a URL, it needs an interface to define the parameters between BugsEye's common attributes and the equivalent external attributes. The Catalog Connector creates the mapping between the two sets of attributes, defining the interface between the two systems."-I cannot make any sense of it.What URL?Can anyone please explain in a simpler way.
Would appreciate any input from you all.
Thanks much!
Priya

Hi Priya,
<u>First Question.</u>
To use catalog line without a material master in SRM, you have two possibilities:
1- You create in the catalog a line with no Material number (NEW_ITEM-MATNR in the OCI), but with a description (NEW_ITEM-DESCRIPTION) and a material group (NEW_ITEM-MATGRP). This item will create a SC item and will be transfered to R/3 as a description item (no material number)
2- You create lines in the catalog but you don't have the use of a material number in SRM. Then you can check in the catalog link customizing the 'Do not Check product' flag. Then the Material number is stored in SRM, and transfered in R/3, but no local material master check is done in SRM.
Here we are talking of the customer material reference, with logistic managment, not the supplier material number or contract number that validates the commercial agreement with the supplier.
<u>Second Question</u>
In fact Emerge "contains" Bugs Eye, and the "publication" from a server to another is only a "manual" process process (Emerge could be used as the catalog search engine).
In CCM the CAT and CSE are separated data and services. You must publish the content in the CSE, or the CSE services (transactions) will not get any data.
You have several options for CCM installation (CAT & CSE can be installed separately): My advice is to install the CCM on the same client of the SRM. It simplifies the master data management (vendors, units, ...) and the process (XI not requested).
Regards.
Vadim

URL links for Workflow Approval Email per user & others

Hi all, we have upgraded to SRM7 and understand that we have to switch to using program /SAPSRM/OFFLINEAPPROVALSEND to generate the workflow notification emails. We have maintained the portal information in the SRM configuration to build the link. However, we have 2 issues here
1. We currently output collective email so emails are sent out at specific timing on a per user rather than per work item basis. The URL link does not seem to work in this case (for shopping cart approval example) and we get an object GUID error. The URL looks something like this
http://sap-ped.dev.xyz.com/irj/portal/?navigationtarget=obn://BOSystemAlias=SAP_SRM/BOTechnicalName=sc/Operation=detailprof&NavMode=3
Also, even if I run the program for a PO approval example, the BOTechnicalName is still pointing to sc.
However, if I do it on a per work item basis, the URL works.
Does anyone know where the control this setting?
2. External and internal portal
We have some users connecting to the portal through more secured channel (external portal). In this case, I couldn't find a way to generate the appropriate URL for the external. In the past in the older SRM version, the program was using the attribute ITS_DEST in PPOPMA_BBP to build the URL link. Now, I do not know how the system knows which portal URL to take if the control is no longer at user level.
Has anyone ever had this requirement before?
My worse case scenario to resolve the above issues would be to use the BADI to alter the content of the email notification. The purpose of posting this message here is to ensure that I am not missing out any standard SAP functionality which could meet our requirements.
Cheers!
SF

Hello,
See hyper-links below:
[How-To: Offline approval - Logon link does not work|http://wiki.sdn.sap.com/wiki/display/SRM/Offlineapproval-Logonlinkdoesnot+work]
[KBA 1511180 - The hyperlink in the offline approval email is incorrect|https://service.sap.com/sap/support/notes/1511180]
Regards.
Laurent.

Cannot see list of Product Categories in Shopping Cart entry screen

Hi All,
I would appreciate it if someone could help me with this issue.
Although I appear to have sucessfully replicated the backend R3 Mat Groups into SRM Product Categories, as I can see them in the hierachy screen, i.e. Hierachy ID R3MATCLASS in trans code COMM_HIERARCHY, they are not appearing in my Shopping Cart entry screen Product Categories drop down.
I have looked in Org structure maintanance and can see two things that may be the root causes:
(a) In 'Exended Attributes', if I select the Source System, I do not get the option to list the product categories in the match code box
(b). In the 'check' screem, the system is displaying the message 'Attribute ITS_DEST not yet defined'
Any feedback on how I can pull in the groups during cart entry would be appreciated.
Thanks,
Steve

Hi Kathirvel,
I am not sure if this workaround is correct, but rather than using trans code BDLS as you suggested, I defined the logical system 'ABC' . This logical system was the assigned as a target system in 'Assignment of Logical Systems' under the product category customisation (table COMV_LOGSYS_MAP)
These changes subsequently allowed the drop down on the Org structure when selecting a Product Category in extended attributes, therefore making the list available in the web front end.
The IMG help text for COMV_LOGSYS_MAP says:
Case 1
You have created the categories in your test system. They therefore have the logical system <SYSTEM_TEST>. So that the categories can also be changed once they have been transported into the production system, the categories must have the logical system <SYSTEM_PROD> in the target system.
Maintain the following entry:
Source <SYSTEM_TEST>
Target <SYSTEM_PROD>
The logical system of the categories will be changed from <SYSTEM_TEST> to <SYSTEM_PROD>.
This appears to have resolved the issue. I would be interested to hear what you think,
Many thanks , Steve,

Separate E-mail folders not getting created

Hi,
I have 8520 model. I have one BES e-mail (work mail) and 3 BIS emails registered. Currently my work mails are showing up in a separate folder with Desktop icon and mails from all BIS accounts are showing up together in a single folder. I am not getting a separate folder for each of my BIS e-mail id. Please guide how to configure it to have separate folder for each BIS account.

Hi Richa,
Pls see whether the attribute ITS_DEST is maintained in the Org structure attributes for all users who recieve the notififcation in their external mail.
In SRM most of the email notification sent out contain URL links in their mail body. This URL in most cases is picked up from the user attributes. Here they play a very vital role.
Also check whether a valid external mail ID is maintained for the user in SU01 .Also all the external mails sent from SRM to external mail ID's can be seen in trascn SOST.Do you see any entries there for the SC?
BR,
Disha.
Do rewards points for useful answers.

Logical System is not defined in table SMOF_ERPSH!

Hi,
When i am replicating a material group to SRM system, in SMQ2, the error message appears as 'Logical System is not defined in table SMOF_ERPSH!'.
can any one please let me know why this comes up, i have checked the SMOEAC settings, its fine and the logical system entries are already present in the tabe

Hi,
Can you verify all your settings as per note 720819?
Also under SMOEAC transaction, site attributes for your site type 'CRM' may not have any value. Please define attributes for your SRM RFC destination. Select the correct RFC destination, then click on button 'Get Values'.After doing this, table SMOF_ERPSH should be populated correctly.
Regards,
Nikhil

ERROR:Occured in data Selection in Extractor

Hi ,
When i am executing a Master data Attributes Infopackage from SRM system to BI, I am getting the following Error from RSMO Screen
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I have replicated the datasources from the source system and activated the Transfer rules, but still the error continues.
But when you check the error messages, it shows
1)You are not authorized to extract from DataSource 0BP_RELATIONS_ATTR in application component: 0CA_BP-IO .
2)Errors in source system.
Can you please throw some light on this issue.When i consult the Basis Consultant regarding authorization, he says he has given SAP ALL authorization which means i have all authorizations.But the error is still occurring.
Thanks,
Amar

Hello!
1) Go to TCODE SM59 and Check that the RFC Connection between Source System and BW System is working correctly. Check the User ID BIWREMOTE_ is Setup correctly here for RFC Communication.
2) Go to TCODE SU01D and verify that User ID BIW_REMOTE is unlocked and has ALL set in ROLES Tab.
3) Go to TCODE SM58 and check if there are any pending entries for User BIW_REMOTE.
4) Verify the IDOC sweeper Jobs (Inbound & Outbound) are running correctly to flush out the Queues.
My Gut feel is that Background Users in R/3 system do not have sufficient access set up correctly...Please post when the Issue is resolved.
Thanks
Vasu

Equivalent of Attribute ITS_DEST in SRM 7.0

Similar Messages

Maybe you are looking for