ERM - CUP Approval Workflow E-mails

Hello gurus,
We are experiencing an issue with Role Expert (ERM) to Access Enforcer (CUP) role approval workflow. When a role reaches the approval stage in ERM, an e-mail notification with a link to CUP approval is sent to the designated approver's LDAP e-mail address. This functions properly. Following approval or rejection of the role, another e-mail should be sent to the requester's e-mail address to inform him/her that the role has been approved/rejected. This e-mail is not functioning. We have the same e-mail address configured in the LDAP, UME, and back-end SAP system, but this e-mail address is not receiving any notification of approval/rejection.
This functionality is appropriately configured in CUP with the following:
Name: RE_APPROVAL
Workflow Type: Role Expert
Approval Determinator: RE_APPROVAL
Request Wait Time (Days): 0
Request Wait Time (Hours): 0
Escalation Configuration: None
Approval Type: Any One Approver
[No e-mail group]
Request Rejection: Yes
Re-Route: No
Confirm Approval: Yes
Confirm Rejection: Yes
Reject By Email: No
Approve By Email: No
Forward Allowed: No
No additional security.
Has anyone seen this issue before? Any advice for troubleshooting will be greatly appreciated.
Thanks,
Joy

Hi everyone,
We are experiencing something similiar as Joy related.
We have configured in CUP 5.3 a workflow for ERM role approval with two stages.
In both stages, the e-mail notification with a link to CUP approval is sent to the designated approver's e-mail address, but following approval or rejection of the role, the e-mail informing the role has been approved/rejected is not sent to the requester's e-mail address.
In the first stage, the CAD is configured to send the request to the approver defined in the role in ERM (web service). In this stage, the requester's e-mail address is not receiving any notification of rejection but do recives all notifications of approval.
The second stage is configured with a fixed approver, and in this case the requester's e-mail address is not receiving any notification of approval nor rejection.
Any suggestions of what can we do to make this work?? We wolud like that both (approval and rejection) notifications be sent to the requester's requester's e-mail address.
Or, if it is possible, can CUP be configured to send e-mail notifications of approval and rejection ONLY in the LAST stage of the workflow??
Regards,
Pablo

Similar Messages

SP2007 Edit approval workflow e-mail

Hello,
One of the sites I a managing in Share Point 2007 has an approval workflow (based on the standard approval workflow) to approve calender items. The e-mail that is send to the approver contains a link to the
calender item, however I would like it to contain a link to the task item, so that the approver does not have to search for the task to approve.
I am new to SharePoint 2007, having only worked with 2010 or 2013. Can anyone tell if and where I can change the body of approval workflow e-mails
in SharePoint 2007.
Thank You!

The first thing to check is whether you can open the site and workflow within Designer. As you're working with a version of SharePoint that's a bit devolved from what you're used to, knowing some differences might be handy: -
All workflow instances are list level only
There are no re-usable workflow templates
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Offline approval workflow not working - SRM 5.0

Hi Team,
Suddenly we have an issue in SRM production server with Offline approval workflow, inbound mails are not getting processed in SOIN and workitems are not getting cleared. So document status is not getting changed.
There is no problem in receiving the mail, we have all configurations setup as per below link,
Offline approval - general configuration - Supplier Relationship Management - SCN Wiki
Incoming mails are received to system user and then auto-forwarded to dialog user. Dialog user is used to schedule the batch job - RBBP_OFFLINE_EVAL.
Please help to resolve this issue,
Thanks
Rajesh Rajagopal

Can anyone please help me on this issue, offline approval functionality is completely stopped
Please provide your help

In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

So, I have found the article
http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
However, there is a basic problem that I run into before I get started.
I am logged into the system as a regular user (ie not a farm admin, etc.).
I do, however, have full control on the site on which I am working.
I create a custom list.
I create a simple one step approval - sharepoint 2010 out of the box workflow.
I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
All I see is "open", "open in a new tab" and "Pin".
I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
So, I click on Lists and Libraries, then on the name of my custom list.
When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
Is there someone who has some advice on how to find this copy and modify option? Or perhaps a web site, web forum, article series, or book covering the topic?
Thank you!

Hi lwvirden,
According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
Copy and Modify button.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SAP workflow sent mail to outlook for approval

Dear Expert,
I have created a custom workflow for sales order, when ever the sales order has been deleted i need to set a mail to manager for approval in outlook mail box. Is it possible to sent to outlook mail box with work item for approval.If they click on approval button the workflow needs to delete the sales order else it shoul retain as it is.

Thanks Shashank.
You have mentioned that we can read user profiles and send e-mails with help of agent assignment. But, you have also mentioned that this is the case where HR is not implemented. So did you mean that where there is no Org Structure?
In my case, we have HR implemented and we have an Org Structure. In the PO/PR release strategy we use Org Structure and Position to decide whom to send E-mail.
Now what is it that I need to do differently to make sure that the E-mail is sent to Outlook directly not via SAP Inbox.
Nani

Built in Approval workflow can't send to AD univeral security mail enabled group (email recipient not valid)

Background: SP2010 SP2 with March 2015 CU installed. Using the built-in Approval - SharePoint 2010 workflow on a library. The Approval workflow does send email to individual users when users are specified in the Approvers field instead of a group. We
need to use a group. The workflow reports the error email recipients are not valid. I don't see anything in ULS logs. The Exchange server tracking logs do not show the emails to the AD group being processed (no evidence they are even received into Exchange,
but all other mail from SharePoint goes through, including the workflow's email to the workflow initiator). I can send email to the AD group from Outlook and all group members get it.
To send Approval workflow email to a mail enabled AD Universal Security group, what
exactly are the requirements?
Q1. Does the SharePoint\system account (aka web app pool account) *absolutely* need to have a mailbox?
If so, I need some clarification. I saw
http://www.spdev.info/2012/11/using-security-groups-with-workflows.html which was offered as a solution in another post. It says "To allow SharePoint to email the mail enabled security group you need to either create a mailbox for the SharePoint service
account, or attach the email address provided in the Outbound Email Settings as an additional email alias for a mailbox." Then it says you need to do *both* - create a mailbox for service account *and* add the outbound email settings address as an alias
in the *service account's* mailbox settings. Well, we can't do the latter. We are using a dedicated AD account with a mailbox for SharePoint mail settings purposes, and no two mailboxes can have the same alias.
I tried adding the AD account specified in the Reply From: outbound email settings (Reply To: is set to a distribution list) to the AD group's "Message Delivery Restrictions" and UNchecking Require that all senders are authenticated (even
though the AD account does authenticate). I tried allowing All Senders and UNchecking Require authentication (though that leaves email address open to spammers), but neither worked.
Q2. Does the AD mail enabled group need to be synchronized via User Profile Sync?
We currently only sync users. I do see the AD groups (we use AD groups into SharePoint groups security model) in SharePoint's People and Groups, and the mail address for the mail enabled group is *not* present in the properties. Is it a requirement to sync
the AD groups so that the email address shows in the AD group's properties in SharePoint?
The AD group is in a SharePoint group with Approve permissions. The individual AD group members are also in another AD group in a SharePoint group with Contribute permissions. I even placed myself in the AD group to test whether permissions issues; I am
farm admin. All SharePoint groups are set to allow Everyone to read the group's members.
This is driving me crazy.
Thanks,
Joan

Hello Victoria,
Thank you. I have an update. I got the workflow working. Turned out to be two separate unrelated issues:
(1) invalid email address for recipient was because the email address of AD group was not present in SharePoint's properties for group. Also why nothing appeared in Exchange Server tracking logs; the email was never sent from SharePoint. Once this was remedied
(explained below), the Task Assigned email was sent out to the AD group.
(2) the Task Assigned email was rejected by Exchange for reason 550 5.7.1 RESOLVER.RST.AuthRequired. The Exchange tracking logs clearly showed this. Setting the AD group's properties Mail Flow Settings, Message Delivery Restrictions to "Only senders
in the following list: <the domain account of the email address specified in SharePoint outgoing email Reply From setting>" and UNchecking "Require that all senders are authenticated" allowed the Task Assigned email to go through.
Answer to Q1: It is not required for System account (aka web app pool account) to have a mailbox when the SharePoint outgoing mail settings Reply From email address is of a domain account of the domain SharePoint is in. That is our scenario, as I noted we
use a domain service account dedicated for SharePoint mail. I can't speak to other scenarios. The Reply To: does not have to be the same email address; we use a distribution list. And, ever paranoid about spamming because of unchecking require autenticated
senders, I verified that my own account could not send email to the group (Outlook provides message "You do not have permission to send to: <GroupName>").
Answer to Q2: I did not have to sync groups via User Profile Service. What I did do, however, was remove the AD group from SharePoint, People and Groups, Groups list, and readd it. (Note: what I *literally* did was was remove the SharePoint group from all
permissions, remove the AD group from the SharePoint group, then remove the AD group from the Groups list, readd the AD group into the SharePoint group, and reassign permissions to the SharePoint group - Read to top-level site, Read to subsite (has unique
permissions), and Read, Approve to the subsite library with the workflow. In order to start clean. When I readded the AD group to the SharePoint group, it came in with an email address; email address now shows in the group's SharePoint properties. I noticed
that the format was GroupName instead of Domain\GroupName. (I had originally created the AD group as a Global Security group, added it to a SharePoint group, *then* (after I found out about that requirement when first troubleshooting workflow) converted it
to Universal and mail enabled it.
I suppose, would syncing groups would fix this issue of SharePoint not updating AD group changes?
Additional note: I first gave the AD group Read to the library directly instead of giving Read to the SharePoint group, tried the workflow, and the email was sent. I then removed the AD group's direct permissions to the library and added the SharePoint group
to the library and that also worked. So I was able to use the AD group in SharePoint group (I had read in one post that would not work).
Thanks,
Joan

Reg : To maintain subustution approver for all the workflow related mails

Hi
I what to know how to maintain a substution for some days for the following req.
As our CTO kyle whitehill is our present approver is going on a christmas & new year leave would like to Delegate his PO approval authority to R Unnikrishnan . new approver for some days AVP u2013 Network Commercial
So i want to configure that all the workflow related mail should go to the new person.
Pls help me on this,
Regards
Suresh.

Hi,
You can create substitution using the function module SAP_WAPI_SUBSTITUTE_MAINTAIN or using the transaction RMPS_SET_SUBSTITUTE.
Here you have to enter the username of the person for whom you want to maintain substitute, username of the substitute start date and end date of substitution.
This will do the job.
Note : Substitution allows only workitem sharing and not mail sharing.
Regards,
Raj

GRC 10.0 CUP - Function Approval Workflow - Decision pending?

Hi, i am customizing the Function Approval Workflow (SAP_GRAC_FUNC_APPR).
I have one stage with only one agent authorization. The agent approved the request but in Search Request:
Instance Status: Running
Instance Approval Status: Decision Pending
Audit Log:
+ Request XXXX submitted..
+ Request is pending for approval at path GRAC_DEFAULT_PATH stage GRAC_DEFAULT_STAGE
Approve ID: zzzz
+Approved by ZZZZ at path GRAC_DEFAULT_PATH stage GRAC_DEFAULT_STAGE
I don´t see the function in GRC. I´m in SP07
Regards
Ignacio

Hi, my workflow Function Approval (default) have a wait event and i can´t delete this step succesfully.
Here are more images about the workflow configuration of Function Approval.
http://es.zimagez.com/zimage/wf10.php
http://es.zimagez.com/zimage/wf20.php
http://es.zimagez.com/zimage/wf30.php
http://es.zimagez.com/zimage/wf40.php
http://es.zimagez.com/zimage/wf5.php
http://es.zimagez.com/zimage/wf6.php
http://es.zimagez.com/zimage/wf7.php
http://es.zimagez.com/zimage/wf8.php
Thanks,
Regards,
Ignacio Barrionuevo.

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Approval workflow error when creating a new custom entity in FIM 2010 R2

Hello,
i'm hoping somebody here can help, me i've been struggling with this for some time now. On a fresh FIM installation i create a custom entity named "Role" and add a few custom attributes.
I then create an approval workflow and MPR for normal users to create entities of type Role, but another user must approve this request. The other user has a working mailbox - i've tried firing an action workflow that sends a mail notification when someone
creates a new role and it is working fine. But, when i enable my approval workflow (the only field i changed from default is the approver) on the MPR, the workflow always failes with the message:
Error processing your request: The operation was rejected because of access control policies.
Reason: The server workflow rejected the operation.
Attributes:
Correlation Id: 750a558a-d3e4-4216-b16a-e76d79f011ec
Request Id: feaabbc9-dea4-49a3-8b29-65b77de6f8fd
Details: The Workflow Instance '04202cc0-14a3-410c-a3fc-2d6e5d25ebe6' encountered an internal error during processing. Contact your system administrator for more information.
I enabled tracing and this is what i found:
Microsoft.ResourceManagement Verbose: 0 : Creating WorkflowServiceHost for XOML Definition:\n<ns0:SequentialWorkflow ActorId="00000000-0000-0000-0000-000000000000" RequestId="00000000-0000-0000-0000-000000000000" x:Name="SequentialWorkflow"
TargetId="00000000-0000-0000-0000-000000000000" WorkflowDefinitionId="00000000-0000-0000-0000-000000000000" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/workflow"
xmlns:ns1="clr-namespace:System.Workflow.Activities;Assembly=System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856
    ThreadId=8
    DateTime=2013-09-04T15:17:10.0496188Z
Microsoft.ResourceManagement Information: 1 : 1 : : Invalid Element 'ReceiveActivity.WorkflowServiceAttributes' found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Information: 1 : 1 : : Invalid data found while deserializing an object of type 'Microsoft.ResourceManagement.Workflow.Activities.ApprovalActivity'.
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Verbose: 0 : A WorkflowRuntime is not available for this WorkflowDefinitionVersionKey '20'.
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Error: 3 : Workflow host activation failed for workflow definition id : 231457c6-d044-4cc7-839f-98e5cf88f514, version key: 20. Exception: Object reference not set to an instance of an object.   at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.ActivateHost(ResourceManagementWorkflowDefinition
workflowDefinition, Boolean suspendWorkflowStartupAndTimerOperations)
   at Microsoft.ResourceManagement.Workflow.Hosting.HostActivator.RetrieveWorkflowDataForHostActivator()
    ThreadId=8
    DateTime=2013-09-04T15:17:10.1277486Z
Microsoft.ResourceManagement Information: 1 : The service has updated the list of active hosted workflow definitions to sequence number '1'.
This happened on two separate FIM deployments, but both of them were set up in the same way. What am i missing here?
Thank you,
Martin

(...) What am i missing here? (...) - Sharepoint 2013 and probable bug in FIM related to it. Check this thread for workaround
and resolution:
http://social.technet.microsoft.com/Forums/en-US/1b76672d-1276-4c71-b9fc-5bb1fcb36877/event-id-3-with-approval-activity?forum=ilm2
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

PO approval from e-mail notifications

Hi All,
We have implemented Oracle EBS 11.5.10.2 on Windows (Financials and SCM).
Managers who are responsible for approving POs, want to approve the POs from their e-mails notifications.
I want to know how to implement this though I know this is possible. I have configured Java Workflow Notification Mailer and Test Mails are going, but want to know how to configure PO approval.
Do I need to follow the steps given in:
http://oraclemaniac.com/2012/08/14/enable-po-approval-process-to-send-po-in-pdf-format-via-email/
Regards,
Thiru

user1983888 wrote:
Thanks. Now the notifications are sent my mails for approval. There is APPROVE FORWARD buttons(links) at the end but when we click it opens the outlook.
Please let me know if any additional configuration has to be done.
Regards,
ThiruHi there are two types of configurations to handle notifications.
1. Outbound configuration: Responsible for sending notifications out.
2. Inbound configuration: Responsible for reading and taking necessary action after receiving notification.
What you have already done is outbound (sending e-mails). Now you need to configure Inbound.
Please see Notification mailer in section
Once it opens in outlook, make sure it has the "NID (Notification id)" at the bottom and send it to the inbound e-mail you have configured in notification mailer.
Workflow Java Mailer FAQ [Document 562551.1]
Configuring the Oracle Workflow 2.6/11i.OWF.H Java-based Notification Mailer with Oracle Applications 11i [Document 268085.1]
How To Configure The Workflow Java Mailer Without An IMAP Account (Assumes No Inbound Processing) [Document 268274.1]
How Does One Configure Oracle Applications Workflow Notification Mailer And Where Is The Documentation To Do That? (Doc ID 1051562.1)
Thanks

PO Approval Workflow

hi,
We have a requirement like
" Need To Send a Notification to the requestor , If the PO sent to the supplier through E-mail was not reached to supplier "
Can anyone please help me how to find the status of the mail sent to the supplier (Whether it was failed or sent successfully)
Mail was sent as a part of PO Approval Workflow .
please help me . I was stuck here
Thanks
Ravi

Duplicate post.
PO Approval
Regards,
Gareth
http://garethroberts.blogspot.com

PO Approval Workflow Customization - Save Validation error

Requirement- we needed to modify PO Approval workflow to add item cost under notification as an additional column. In this process I have tried saving the standard PO Approval workflow but when doing validate it throws an error.
I am using Oracle EBS R12.1.3
and Oracle Workflow Version 2.6.3.5
Attaching error document ..
Any quick help is appriciated.
Thanks,
Ajay

Hi,
I believe the feature is available.
Oracle Purchasing User's Guide Release 11i/R12
http://www.oracle.com/technetwork/documentation/applications-167706.html
Setup Notes for E-mail Purchase Orders [ID 198539.1]
Release 12: New Features For Purchasing Approvals [ID 429314.1]
FAQ: Document Approval and Routing [ID 210488.1]
Thanks,
Hussein

PO approval workflow customization

we want to send email notification to supplier upon approval of PO approval. Is there any default functionality available or we have to customize a PO approval workflow.

Hi,
I believe the feature is available.
Oracle Purchasing User's Guide Release 11i/R12
http://www.oracle.com/technetwork/documentation/applications-167706.html
Setup Notes for E-mail Purchase Orders [ID 198539.1]
Release 12: New Features For Purchasing Approvals [ID 429314.1]
FAQ: Document Approval and Routing [ID 210488.1]
Thanks,
Hussein

Upload of PO Approval Workflow Customization showing errors.

Hi,
As per the client requirement, I have customized the PO approval Workflow
For customization i did take care that only those standard workflow processes are customized which are prescribed by Oracle as customizable.
For ex: PO Approval Top Process (Protection Level 1000)
1. All other custom processes are defined and then included in the standard processes.
2. I have done all this activity at an access level of 100 in Workflow Builder.
3. For every custom object in workflow i have checked the Preserve Customization checkbox
4. Though Preserve Customization Checkbox is not checked for PO Approval Top Process.
5. After Verifying the design in Workflow Builder i tried Uploading the Workflow to the instance but it is giving Errors
First I tried to upload in FORCE mode
1. Copying the customized poxwfpoa.wft file to PO_TOP/patch/115/import/US directory
Command execurted
$FND_TOP/bin/WFLOAD apps/simple4u 0 Y FORCE poxwfpoa.wft
After running this it was giving errors like
Display name conflict for ACTIVITY entitiy 'POAPPRV/APPROVE_AND_FORWARD_PO' with APPROVE_AND_FORWARD_THE_PO:D:Bestellung genehmigen und weiterleiten
and so on ....like this
Then i tried it in UPGRADE Mode
$FND_TOP/bin/WFLOAD apps/simple4u 0 Y UPGRADE poxwfpoa.wft
after this it was giving errors like
MESSAGE 'POAPPRV/XML_NOT_SET' is protected, no changes were saved.
MESSAGE 'WFSTD/WFSTD_DEFAULT_VOTE' is protected, no changes were saved.
MESSAGE 'POAPPRV/EMAIL_PO_PDF_SUPP' is protected, no changes were saved.
MESSAGE 'POAPPRV/EMAIL_PO_PDF' is protected, no changes were saved.
MESSAGE 'POAPPRV/PO_PO_APPROVE_PDF' is protected, no changes were saved.
MESSAGE 'POAPPRV/PO_EMAIL_PO_PDF_WITH_RESPONSE' is protected, no changes were saved.
MESSAGE 'POAPPRV/NOTIFY_PDF_ERROR' is protected, no changes were saved.
ACTIVITY 'POAPPRV/ACCEPTANCE_REQUIRED' is protected, no changes were saved.
ACTIVITY 'POAPPRV/ANY_REQUESTER_CHANGE' is protected, no changes were saved.
ACTIVITY 'POAPPRV/ANY_SUPPLIER_CHANGE' is protected, no changes were saved.
Display name conflict for ACTIVITY entitiy 'POAPPRV/APPROVE_AND_FORWARD_PO' with APPROVE_AND_FORWARD_THE_PO:D:Bestellung genehmigen und weiterleiten
ACTIVITY 'POAPPRV/APPROVE_AND_FORWARD_THE_PO' is protected, no changes were saved.
ACTIVITY 'POAPPRV/APPROVE_PO' is protected, no changes were saved.
Display name conflict for ACTIVITY entitiy 'POAPPRV/APPROVE_PO_SUB_PROCESS' with APPROVE_PO:D:Bestellung genehmigen
ACTIVITY 'POAPPRV/BLANKET_PO_REAPPROVAL' is protected, no changes were saved.
Though after this i checked, by creating a purchase order, whether the customization have been uploaded or not to my surprise they got uploaded and workflow was working fine
But my problem is that why is this error is coming and in what all scenarios the workflow can fail because of this?
Please advice as i m not getting any clue to it !!
Will request forum members to reply ASAP.
Thanks,
Sachin Relan

Hi,
I believe the feature is available.
Oracle Purchasing User's Guide Release 11i/R12
http://www.oracle.com/technetwork/documentation/applications-167706.html
Setup Notes for E-mail Purchase Orders [ID 198539.1]
Release 12: New Features For Purchasing Approvals [ID 429314.1]
FAQ: Document Approval and Routing [ID 210488.1]
Thanks,
Hussein

ERM - CUP Approval Workflow E-mails

Similar Messages

Maybe you are looking for