Error 8 occured at Open File

I seem to randomly get this error. I am running a rather complicated 'for' loop that runs about 1000 times. I get the following error somewhat sporatically. I think this has something to do with a file permission error, but I cannot find a way to fix this error, not can I make it consistently occur at the same time.
Any help?
Thanks a ton.

Most probably another application (e.g. disk indexing, antivirus scan, backup, etc) opens the file and denies your application write access for a short time.
You can ignore this error retry since it for a short time. Another solution is to set the deny mode to "deny read/write" when you open the file. That is a setting on the "Open File" node. By default, LabVIEW opens file allowing simultaneous read/write access by other application. This is seldom required and wouldn't be a problem if the other application didn't lock the file for itselt the time it access it. Unfortunately, the high level File I/O VIs don't allow to set the deny mode on the file; you have to open the file using the "Open File" node directly.
LabVIEW, C'est LabVIEW

Similar Messages

Error occuring when opening file programatically?

I am trying to create a directory(ok) and then create a file from information obtained from a program(error). In this example i am calling the directory C:\TESTDATA\`serialnumber`\`type of test` and the file called `date``operator`.xls
However once the directory is created, an error occurs when i open the file to write my table into?
Can anyone help?
Thanks
Attachments:
test.llb ‏77 KB

Hi,
Can you do two things to help us help you? First, save your vi's using the "Save with options" selection "Development distribution", as some us don't have the OpenG libraries installed, and two, give us the error code/message you are getting.
Thanks
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Error 6 occured at open file+.vi:open file

Hi
Iam using lab view 7.1 licensed version.But when i create a stand alone application and install it in a 4gb touchpanel(ADVANTECH TPC 660G B1-E).iTS WORKING PERFECTLY FOR SOME TIME.But after some time i get an error (error 6 occured at open file+.vipen file).Iam attaching the snapshot
plz help me out
ekanth
Attachments:
untitled.JPG ‏55 KB

This indicates a problem with your code. Since you haven't shown us any code we can' tell you what the problem is. Are you trying to open a file that's open by another application? Are you trying to open a file that's on a network, and the network is temporarily unavailable? You should know what file it's trying to open - after all, you wrote the app, right?

Stand alone application(.exe) : Error 7 occurred at Open File+.vi: Open File (error: L'erreur 7 s'est produite à : Open File+.vi:Open File)

Dear group members - as i am trying to build a stand alone application , i ran into this problem : "Error 7 occurred at Open File+.vi: Open File" (L'erreur 7 s'est produite à : Open File+.vipen File)
when i select continue i get this error message: "Error 7 occurred at open/create/replace file in Write spreadsheet string.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi"" ( "L'erreur 7 s'est produite à : Ouvrir/Créer/Remplacer un fichier dans Write Spreadsheet String.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi" )
i didn't get what's the problem with this vi, i have no problem running my VIs
Can any one here help me out ?
here is the project :

Neither can I. When I opened your Project, there were no VIs present on the top level. The Build Spec refers to a Mainv12, which I finally found buried in the folder Interface 2, but when I tried to open it, there were multiple missing VIs. I notice you have an Interface 2.llb -- is this the same as the VIs in the Interface 2 folder? If so, try getting rid of the .llb (at least for the purpose of sharing your code in the Forum) and re-post your code. As it stands, when I open your Project, virtually every entry is marked "Warning: has been deleted, etc." The fact that so much is "missing" means that I can't easily see/understand MainV12, hence can't guess where the File Not Found error is arising. Sorry.
Bob Schor

Error 7 occurred at Open File+.vi:Open File,NI-488: Nonexistent GPIB interface

I did some clean-up of my computer and have been having issues ever since.
I'm not the one that did the programming; the person who did is long gone.
The VI loads fine but when I hit run I get:
Error 7 occurred at Open File+.vipen File
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
All the necessary VIs are available and I've tried changing all the file calls in the VIs to the new locations but the error is the same.
Any suggestions?
Thanks.

Error 7 is a generic file not found. If it is happening after cleaning up files, more than likely you moved some subVIs called in a main VI to a new location on your computer. If all the VIs are in a project, a possible solution would be to remove the vis in the project directory and add them back to the project as they may be pointing to a previous location where the files were once stored. Perhaps this is what Anon123123123 meant by "linking". Hope this helps.
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

Why am I getting this message suddenly, when I've done dozens and dozens of projects without trouble at all: The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

Why am I suddenly getting this message after I've been using iMovie for a few years now and have never had any such issue before: The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission)

Two things
I meant search THIS FORUM
Error minus49 not same as ERROR 49
Yours Bengt W

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

An error occurred while opening the file, you can not open this file because it does not page???

Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>

<NARLGLR005>
<LIST_G_PLAN_CODE>
 <G_PLAN_CODE>
 <PLAN_CODE>03101C3003</PLAN_CODE>
 <PLAN_NAME>03101C3003_test</PLAN_NAME>
 <PLAN_EM>John</PLAN_EM>
 <PLAN_START_DATE>101.09.01</PLAN_START_DATE>
 <PLAN_END_DATE>102.08.31</PLAN_END_DATE>
 <PLAN_HOSTS>abc_super</PLAN_HOSTS>
 <LIST_G_PURPOSE>
 <G_PURPOSE>
 <PURPOSE_CODE>11600000</PURPOSE_CODE>
 <PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
 <LIST_G_PURPOSE_CODE>
 <G_PURPOSE_CODE>
 <BUDGET_AMOUNT>0</BUDGET_AMOUNT>
 <REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
 <TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
 <REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
 <TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
 <TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
 <TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
 </G_PURPOSE_CODE>
 </LIST_G_PURPOSE_CODE>
 <CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
 <CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
 <CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
 <CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
 <CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
 <CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
 <CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
 </G_PURPOSE>
 </LIST_G_PURPOSE>
 <LIST_G_PLAN_SUBSQL2>
 <G_PLAN_SUBSQL2>
 <GL_DATE>31-07-12</GL_DATE>
 <NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
 <AP_UNAPP></AP_UNAPP>
 <PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
 <PLAN_CODE1>03101C3003</PLAN_CODE1>
 <PLAN_EM1>Elly</PLAN_EM1>
 <PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
 <PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
 <PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
 <REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
 <DESCRIPTION>101 year</DESCRIPTION>
 <CF_GL_DATE>101.7.31</CF_GL_DATE>
 </G_PLAN_SUBSQL2>
 </LIST_G_PLAN_SUBSQL2>
 <CF_START_DATE1>99.1</CF_START_DATE1>
 <CF_END_DATE1>102.11</CF_END_DATE1>
 <CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
 <CF_OU_NAME1>IT Department</CF_OU_NAME1>
 <CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
 <CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
 <CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
 <CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
 <CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
 <CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
 <CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
 <CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
 <CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
 <CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
 </G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

"An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint."

In PowerPoint 2013 on Windows 7 - 64 bit, when
File / Save as is selected, an error message comes up stating, "An error occurred while opening the file dialog. Please save your presentation, exit, and restart PowerPoint." This is an intermittent issue and also
affects Excel 2013. I have tried repairing it, done windows update and also uninstalled and reinstalled but no luck. I have researched this issue but it relates to Office 2007 and 2010 and the resolution does not support 2013.
Has anyone come across this issue? If so how did you resolve it?
Many thanks….

Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

A networking error has occurred: Cannot open file (-3001)

When I attempt to use Software Update I get the following message: "A networking error has occurred: Cannot open file (-3001)"
I am connected to the Internet, can connect with iDisk no problem. Manual downloading also works.
Any ideas? Do I trash a corrupted file or what?
Many thanks in advance.
John
Message was edited by: [email protected]

I troubleshot this problem with a helpful Apple tech person who provided a workaround:
Establish a second identity. After you log out of your own identity and into the second identity, you can successfully use software update. He had me trash a number of items deep within the system but nothing else worked. I also ran the Utilities program both off the system and the 10.5 disk with no effect.
So far then, the only solution appears to be the second identity route or to manually download and apply updates. Quite a mystery I'd say!
Any ideas out there?

Suppressing error 8 occurred at open file dialog box

Hello,
I am getting randomly occurring "error 8 occurred at open file" dialog
boxes every couple of days. This is stopping all of the data collection
on all of the vi's on the pc. In order to continue all that is needed
to hit continue. Is there a way to suppress this dialog box?

There's a vi called Clear Error, in the Dialog and User Interface section of the palette. If you wire the error out of the offending vi to the error in of the clear error, your problem should be solved.
Technically I think you can wire the error out to just about anything that ends (as in, to the side of a case structure or loop or something, so long as nothing is connected to it further). I think as long as LV thinks that you've handled the error (i.e. wired anything out of the error out), the dialog box does not come up.
Message Edited by Novatron on 07-07-2006 11:02 AM
Attachments:
No Error.jpg ‏5 KB

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

Web Analysis 9.3.1: Error occured while opening document. Document ID = {0}

Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
Could anyone please through more observation on this issue. Let me know if any further information is needed!.
Kindly suggest me any way to resolve it.
Thanks,
Krishan

The isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource)

Error occurred while opening Web Analysis document.

Hi all,
I've a problem when i try to open some web analysisi report from work space that first worked fine.
The error is:
Error occurred while opening document.
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native: -2147219967 Error Reference Number: {3507FEFB-B38E-4B36-9399-5F3E6B5FAC6A} Num: 0x80040601;Type: 1;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 2360;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1491;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1245;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1203;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1067;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1390;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1331;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1292;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 603;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 580;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 785;Ver: 9.3.1.0.2042; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: CHsvDataQueryResults.cpp;Line: 209;Ver: 9.3.1.0.1502; Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: HsvADMDriverSessionInternal.cpp;Line: 4353;Ver: 9.3.1.0.1502;
Can someone help me on this?
Thanks
Best Regards
E. G.

Can anyone help me too?

WebAnalysis Error: Error occured while opening document. Document ID = {0}

Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
Kindly suggest me any way to resolve it.
Thanks,
Krishan

Hi Natesh,
Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
* Yes, the source is Essbase.*
If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
* The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
If source is based on a Relational SQL query, chances are that- Query is no longer valid.
* NA as this statement is NOT applicable to our source.*
If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
* This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
Could you please through more observation on this issue. Let me know if any further information is needed!.
Thanks for your time.
Regards,
Krishan
Edited by: user10475612 on Nov 8, 2009 1:07 PM
Edited by: user10475612 on Nov 8, 2009 1:09 PM
Edited by: user10475612 on Nov 8, 2009 1:12 PM

Error 8 occured at Open File

Similar Messages

Maybe you are looking for