Error 10846 after running VI for a day

I am trying to develop a program that acquires data continuously from 9 analog input channels, then processed the data to extract the mean, max, min for each signal and do some calculation and then store the data in a spreadsheet every minute. The VI works fine if I run it for a short time (less than 5 hours) but if I tried to run it for a long period (an all day), I get an AI error 10846. If I ignored the message error and keep running the program, the error message 10846 keeps appearing and every thing in the VI seems slowing down. If I restart the VI without restarting the computer, the VI will run but the same message error 10846 will reappear after a short time. So I have finally had to stop the program and restart the co
mputer so that the VI reruns normally. The VI is running at a scan rate = 1000 scans and a scan to read = 2000 scans, the buffer size is set up to 20000 scans. I tried to increase the buffer size up to 100000 scans and increase the scan to read up to 10000 scans but the message error keeps appearing. If I look at my scan backlog, for the first couple hours, it is equal to 0 and after that, for no reason, once in a while, the scan backlog show a value different of 0.
I do not have really a lot of experiment with Data acquisition system and I am not sure to use the correct values of those parameters. But at the same time, I do not understand why the VI is running fine for couple hours and then crashed.
Concerning the system that I am using, my computer is a 1 GHz Duron Processor running Windows 98 with 120 MB of RAM and I used:
NI software = LabView version 6.1
DAQ card = PCI-6071E
I attached my code for the ones who will have time to run it.
If anyone can offer some wisdom on
that it would be greatly appreciated.
Thanks
PS: I am also wondering if the problem could come of my computer or hardware I am using?
Attachments:
TAH_DAQ_050703.zip ‏749 KB

Right off hand, I would say that the fact you have to restart the computer to recover is very odd indeed--and troubling. Have you tried to run any of the continuous acquisition examples that ship with LV to see if they exhibit the same behaviour? Also, is the computer on a network? If so, try unplugging it and see if you still get the problem. Finally, when the thing is slowing down, what does the computer's overall CPU utilization look like?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

ABAP Program gives error after running successfully for few days / months

I have a problem that sometimes my programs start giving errors or does not run at all after successfully running for few days / months.
But, when I copy the same program with a different name (without any changes ) it starts running again.
Yesterday I had another problem. I was sending a request to be transported to Production Client, and the request was not getting transported. But when I changed just the name of the program, It was transported to Production Client.
I can't understand where the problem lies and what happens to the programs after running successfully for few days. All I have to do is just copy that programm into another name and it starts running.
Can anyone help me?
Regards,
SK Daniel

about the transport thing..i had the same problem few months back the reason was, i included a table which is having different package from my program..so wot im thinking is when you creating a different program u might be assigning different package to this new program and this package is same as all the tables included in your program...
regards

Read Error logs after running the background jobs

Hi,
How to read the error logs after running the background jobs. In our scenarion we are running the COHV transaction to release the production orders in background. But we are not finding the error logs after background job. We would like to read the error logs and correct for further processing.
Kindly suggest.
Thanks & Regards,
N. Laxman

Hi
you can check the back ground jobs defined by any user in SM37 and where you can see the spool and job logs as well.
plz check in your case and revert back
Regards
Anupam Sharma

Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

Help!!!!!! my iPod touch nd gen will not turn on at all even after charging it for 2 days straight what's wrong???

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Iphone 5 won't charge after being dead for three days.

Iphone 5 won't charge after being dead for three days due to power cable breaking. I got a new cable and it still will not charge. Is my phone broken in any way? What can I do to fix this?

Hey TalkBack12,
These are the recommended troubleshooting steps I found for when your battery does not charge:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
via: iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Since you got a new cable, I would concentrate on trying a cable other than the new one.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Kernel_data_inpage_error & non-system disk error but everything running OK for a while

Hi,
can someone please help me out since I have a deadline in coming up and need my laptop to work properly!
I have windows 7 64bit running on a HP ProBook 6550b. My PC runs fine for about an hour, after an hour the screen freezes for 10 seconds and then I get the KERNEL_DATA_INPAGE_ERROR. He reboots and then I get the message 'Non-system disk or disk error'
Then I just shut down my PC and start it back up and everything works perfectly fine again for about 45 minutes. Then again the same problem.
I have tried multiple things. I executed a chkdsk /f /r This did find some problems. I tried and followed some instructions about changing the paging file settings. I ran a memtest. No errors with the memtest.
Finally I went in the BIOS and I did a HP harddrive test. This one failed almost immediately but I can just close the BIOS and start my PC and windows runs fine.
What can I do to resolve this problem other then buying a new harddrive. (I intend to buy a new laptop anyways in couple of months after I have passed my deadline and test period has finished. But for short term I really needs this to work.)
Many thanks!!
Johan
This question was solved.
View Solution.

Just in case someone else encouters this.
The problem was due to my SSD M4 hard drive. There was a problem with the firmware causing hourly crashes after the disk has been in use for more then +-5200 hours. Upgrading the firmware fixed this for me.

Error Code After Running Apple Hardware Test

I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
this is the error i got after running apple hardware test:
(it came out as a Mass Storage error... which is Hard Disk i guess)
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus 0-Master
**ERROR*CODE***ERROR*CODE**
Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
I know about this: http://www.apple.com/support/imac/repairextensionprogram/
I might go to the apple store, but I dont wanna make a trip out there for nothing.
Does anyone know what I can do or should I just take it to the apple store.

Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

My iPhone 5 was lost in the snow, then found and it doesn't even turn on anymore after it worked for 5 days??

I lost my phone a few days ago when it fell out of my bag but then someone found it in the snow. Not sure how wet it was when the person found it but my phone worked fine for 5 days after. When I plugged my phone in to charge over night, I woke up with it completely shut off and I can't even turn it on. Not sure if this is a water damage issue due to the phone being lost in snow or if something else could be the case. Its just strange that it worked perfectly fine for the past 5 days and now I can't even turn it on.
Any insight would be helpful!
thanks

It probably had moisture inside, and as you used it you caused the moisture to short out critical components. You can take your iPhone to an Apple Store for diagnostics, but if the moisture indicators are tripped (and they probably are) it would need to be an out of warranty repair, or if you have it, one for the $79 Apple Care+ "incidents". If you have to pay the full price for an out of warranty repair, that will run you much closer to $269 USD.

Error f5333 after running AFAB

Hello experts,
I have this issue. After running afab abd got to fbl3n to display the gl account line times for this posting I get the following error:
System error: Routine Beleg_Nachlesen info 2000-6600000001-2014-006 Not in BSEG/archive ; inform systems administrator
Message no. F5333
Diagnosis
In program routine 'Beleg_Nachlesen' an error ('2000-6600000001-2014-006') has occurred. Processing is terminated.
Procedure
This is caused by a program error and you should contact SAP Support.
Can yoy please help me with that?
Regards,
Katia

Hi,
According to me this issue is caused due to some bug in system wherein the document that got posted through AFAB got archived in the system. So in this case I think you need to raise an OSS to SAP and then they will probably provide a program for rectifying the issue.
Regards,
Malhar.

I'm missing my preloaded Outlook mail after using it for two days/new HP Envy

I have a new HP Envy 64bit 17" running Windows 10, I went through the set up of mail using Outlook that was loaded when I got it. I set up the mail account (pop) and successfully imported mail to my new inbox. I used the mail outlook app for 2 days just fine both sending and receiving. I'm finishing set up for my computer last night, I believe? I completed set up for Secure Pass Fingerprint; at least it said successful ect. This morning, I opened the computer, clicked on the mail icon on the windows pane, and there is no outlook, inbox, or anything. There is a screen that says Mail, not synced yet, and basically blank. There are icons on the lower left of the screen there such as a calendar, which I also set up yesterday and in fact all my appointments are there. What happened to my email/Outlook? Did I do something weird, or just stupid? THANKS

MsFoof wrote:
... I opened the computer, clicked on the mail icon on the windows pane, and there is no outlook, inbox, or anything. There is a screen that says Mail, not synced yet, and basically blank. ......Hi, You have to wait - I don't know why (could be from Microsoft exchange servers or even your ISP). I use few devices inside my house but AT THE SAME TIME, one machine can get emails before the others. Normally my Windows 8.1 phone is the first one to sync my Outlook and Hotmail accounts. I deleted emails on one machine and they sometimes they appear again on other machines. Regards.

After running KDE for some time, it will stop suspending on lid close

I can use KDE for a day or two and it will behave just fine, but inevitably, after some time, it will stop going to sleep when I close the lid or after my 15 minute timeout that I have set up in the power manager thing.
A reboot will fix it for a while. This does not happen in Xfce or Gnome. Hitting the suspend button works.
There are about 10,000 things that could affect suspending, so I'm just wondering if anyone else has had a similar problem?

I can use KDE for a day or two and it will behave just fine, but inevitably, after some time, it will stop going to sleep when I close the lid or after my 15 minute timeout that I have set up in the power manager thing.
A reboot will fix it for a while. This does not happen in Xfce or Gnome. Hitting the suspend button works.
There are about 10,000 things that could affect suspending, so I'm just wondering if anyone else has had a similar problem?

Error -1074360293 (IMAQdx Timeout) after running acquisition for some time

My vision application in LabVIEW does several acquisitions and processings successful but then the acquisition (grab) suddenly fails with a timeout error (-1074360293, IMAQdx: Timeout). The error does not happen when only acquiring the images.
After the error happened no acquisition is possible. Even when LabVIEW is closed MAX returns a timeout error. Only rebooting helps.
some Hardware Details:
3 FireWire Controllers (1394a)
3 Cameras connected to the first two controllers, one to the third (7 cameras total)
Mode for all cameras: 1280 x 960 Mono 8 7.50 fps
The bandwidth for a FireWire controller is sufficient. (Three cameras on one controller run without any problem.)
The memory consume of the application is raising short before or after the error occurs. But I did not find out where exactly.
Before the error happens some minutes until one and half an hour pass.
More details will follow.
Is there a specialist in FireWire or in vision who can help?
Greetings,
shb
Solved!
Go to Solution.

Changing the driver to this one seems to solve the issue:
"OHCI-compliant 1394 Host controller (legacy)" (in German: "OHCI-konformer 1394-Hostcontroller (alt)")
With this driver the test has run for more than 66 hours without throwing an error.
Some related Articles:
http://www.rme-audio.de/forum/viewtopic.php?id=9827
http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

Z77A-GD65 error 55 after running for 5 months just fine

Hi,
My Z77A-GD65 has been running perfectly since last May with a 3770K, G.Skill 8 GB DDR3-2133 Quad-Kit and a Antec EA-550 Platinum PSU.
Now the PC reboots continuously with error 55 showing on the mainboard.
Two weeks ago I installed a new GPU, Geforce 660ti. After some initial hassles, it was working just fine.
Things I have tried:
- Removed the GPU, No go.
- Removed all memory but 1 stick in slots 1&2. Repeated this with a different stick. No go.
Probably something broke, but not the 'bent pins' issues I see reported when people see a 55 error, as my system was running just fine.
Can anybody give a hint what broke and what should be replaced?
Thanks for the help,
J.

Thanks for the hints, but still no go...
Things I did:
- Cleared the CMOS according to the guide, actually several times, but no go.
- I borrowed a spare 650W Be Quiet PSU from a friend, but alas, I still see the 55 error.
Does this then point to a defective mainboard or the CPU? From the documentation I get the impression that 55 means that the CPU can not be started.
Is this correct?
Thanks for the help,
J.

Error after running Projector for a while

I run a projector in a kiosk. When being used there is no
problem, but at night if it is not being used for a bit I get one
of two errors
Faulting application dirproj.exe, version 10.1.0.11, faulting
module iml32.dll, version 10.1.0.11, fault address 0x000113d7.
Faulting application dirproj.exe, version 10.1.0.11, faulting
module iml32.dll, version 10.1.0.11, fault address 0x0000be06
These happen at various times and doesn't seem to be a
pattern for when it is one or the other. Any help is appreciated

You would need to make another application to monitor the
status of the
main one. Xtras like BuddyAPI will help there. It is easy to
check if
an app is open, and if not, open it.
Or you could have the main app write out a file every 5
minutes or so.
Have your monitoring application check the file date on that
file. If
it is >10 old, then that means that the main app is locked
up or
crashed. The monitor app can close it then re=open it.

Got an error code after running AHT. Now what?

I ran the Apple Hardware Test and got the error code: 4sns/1/40000000:th1H-83.265
I looked it up and it apparently means there's a problem wuth my heat pipe or heat sink. Makes sense because my MBP burns up and fans really start going when running a game, movie, or photoshop. Does this mean I have to replace something or what? How much will it cost me if I take it in for repairs? I no longer have warranty. I had to replace my harddrive after it failed in Feb 2012 so I will not be happy if it turns out the failure was related to this heat problem and never fixed.
Mid-2009 13" MBP running OSX 10.8

That error is indeed a sensor failure. Make an appointment at an Apple store genius bar. It is a hardware failure that only they can resolve. They will tell you what costs are involved, I simply do not know that.
Ciao.

Error 10846 after running VI for a day

Similar Messages

Maybe you are looking for