Error com.businessobjects.enterprise.fullclient.FullClient

I work with Desktop Intelligence to create reports. After creating a export my custom reports to Infoview.
I also use Business Objects integrated with Clarity PPM from CA Technologies.
My reports run in Infoview and Desktop Intelligence. When I try to open these reports in Clarity this error appears: com.businessobjects.enterprise.fullclient.FullClient.
Does anyone who also works with Clarity PPM and Desktop Intelligence can help me?
Thanks a lot,
Lenyllson de Moura
Gestão TI - Brasilia/Brazil

I know this is a really old thread, but I've been looking all over for the solution to my error
could not load file or assembly businessobjects.enterprise.sdk
I had copied the businessobjects.enterprise.sdk.dll from my dev machine to the bin directory of the website, but then got other errors about not finding any source lines in file.
Copied all the netmodule files that go with the dll, and everything works great now!
Thank you so much!

Similar Messages

Error:"com.businessobjects.wp.om.OMReportElement Container (Error: INF) "

When trying to open document in infoview, the following error message was showed:
com.businessobjects.wp.om.OMReportElement Container (Error: INF)
version:BOXI3.1 update version
Before the error occured, the following action was taken.
using the following command line to start the stoped server
net start "Apache Tomcat 5.5.20"
net start "Server Intelligence Agent (host name)"
After confirming the server was started, try to open document , then the error message was showed.
・it has happened one time
・new document can be create
・it works ok after restart the service
・no error has orrured during using command line

Thanks for your reply.
We are on Unix environment and we use these commands to stop and start:
to stop cms and tomcat - /bobje/stopservers and /bobje/tomcatshutdown.sh
and
to start cms and tomcat - /bobje/startservers and /bobje/tomcatstartup.sh

LCM VMS Error com.businessobjects.vms.VMSException: svn: URL

Hi Experts,
I am recieving below mentioned error after configuring the LCM with existing Subversion.
com.businessobjects.vms.VMSException:
com.businessobjects.vms.VMSException: com.businessobjects.vms.VMSException:
com.businessobjects.vms.VMSException: svn: URL
'svn://XXXX:5001/BusinessObjects_Version_Mgmt' doesn't exist
I have configured the subversion as mentioned in the installation document of LCM.
Document Name : "xi31_LCM_Install_en.pdf" Page number 20.
Business Objects Version : BO XI 3.1 SP3
I tried to telnet the system XXXX:5001 from BO installed machine and its working fine.
Any help is much appreciated.
Regards,
Mitesh Joshi

Hi Mitesh,
I have noticed a few things.
Your error message points to port 5001 but your VMS settings are pointing to 6001. Make sure you are using the correct port.
Plus the error message contains underscore but your VMS settings does not have it.
Here is the logic. If you have created a repository as F:\LCM\BOVersionManagement, the -r parameter of your service on Subversion should be as "-r F:\LCM" i.e Folder level up the actual repository and your VMS setting should have repository name as "BOVersionManagement"
It goes without saying, if you have any underscores it should be included identically and the port number should be correct.
Hope it helps.
Regards
Chinmaya

Com/crystaldecisions/enterprise/ocaframework/idl/PingerExHelper

Using Crystal Report Server XI R2 and the included RAS SDK for report development in a web app.
The web application is hoisted on a WebLogic server, below stack trace is shown in the server log
after leaving the web application running for a while, ~ 15 minutes:
java.lang.NoClassDefFoundError: com/crystaldecisions/enterprise/ocaframework/idl/PingerExHelper
     at com.crystaldecisions.enterprise.ocaframework.aa.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.int(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.n.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:595)
Exception in thread "ORBacus:Client:SenderThread" java.lang.NoClassDefFoundError: com/crystaldecisions/thirdparty/org/omg/CORBA/TRANSIENT
     at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded.senderRun   (GIOPClientWorkerThreaded.java:452)
     at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$SenderThread.run(GIOPClientWorkerThreaded.java:57)
What is causing these errors and how can we fix it?
Thanks.

Yes, double checked to make sure corbaidl.jar file is in WEB-INF/lib but still errors.
12:05:29-ERROR-com.crystaldecisions.enterprise.ocaframework.ActiveScanner-(run:44):
java.lang.NoClassDefFoundError: com/crystaldecisions/enterprise/ocaframework/idl/PingerExHelper
     at com.crystaldecisions.enterprise.ocaframework.aa.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.int(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.n.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:595)
Exception in thread "ORBacus:Client:SenderThread" Exception in thread "ORBacus:Client:SenderThread" java.lang.NoClassDefFoundError: com/crystaldecisions/thirdparty/org/omg/CORBA/TRANSIENT
     at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded.senderRun(GIOPClientWorkerThreaded.java:452)
     at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$SenderThread.run(GIOPClientWorkerThreaded.java:57)
java.lang.NoClassDefFoundError: com/crystaldecisions/thirdparty/org/omg/CORBA/TRANSIENT
     at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded.senderRun(GIOPClientWorkerThreaded.java:452)
     at com.crystaldecisions.thirdparty.com.ooc.OB.GIOPClientWorkerThreaded$SenderThread.run(GIOPClientWorkerThreaded.java:57)
Any other ideas?
Thanks
Johnny

Error: There was a problem logging on to SAP BusinessObjects Enterprise

I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaveru201D as my guide, attempting to follow it step by step. Please bear with me as I have only started working with this set of products within the last month. (Very new at this and do not have a very good grounding of the way it all works together. Trying to learn as quickly as possible as I am expected to support this set of tools for our developers / users.)
I have been trying to follow along with the book to get everything connected. At this point, I have BOE set up to attach to the SAP NetWeaver BW system. I have created a test Bex Query on the BW system. From within BOE, using CMC, I can configure the Bex Query as an OLAP connection. I have set it up for SSO. I have also exchanged certificates between the BOE and the SAP NetWeaver systems which I believe will allow the exchange of tokens.
I then go into Crystal Reports for Enterprise XI 4.0 on my PC. (I am running Windows 7 64-bit on the PC. I installed the BOE 4.0 suite of client tools except for SAP BO Live Office and SAP BO Analysis for MS Office). I can attach to my BOE system and can browse to see the OLAP connections in the BOE. I then try to select one as the data source for a new report. I then get a pop-up window stating:
   Unable to Logon
     There was a problem logging on to SAP BusinessObjects Enterprise.
       Please check your logon credentials and make sure your network is properly configured before trying again. If the problem
       persists please contact your Administrator.
I cannot find a log / trace / error file on my PC, the BOE system or the BW system to indicate any additional information as to what the root problem is. Has anyone seen a similar error and might know where I can find more information, how to increase trace levels so that I get some additional information or provide hints as to what the root problem might be?
I am also trying to figure out how the authentication works between the PC, BOE and SAP NetWeaver. If using a token, there has to be consistency with the username (or some value) and I am not certain that is happening. Right now, my BOE sources its UME from the SAP NetWeaver BW system. So its user accounts are in the form SID123/ACCOUNT where SID is the SID of the SAP NetWeaver system and the string u201C123u201D is the client on that SID. When I log into the BOE system from within Crystal Reports, I am using the account in that format whereas the account on the SAP NetWeaver BW system in actuality is only the string ACCOUNT. So is the token stripping the string u201CSID123/u201D from the account name when it is sent so that the accounts match? Or do I have to manually configure some kind of account alias (in the BOE system?) so that the two recognize each other? Or something else?
Any hints or ideas around where I can find additional information or where I have gone wrong, would be greatly appreciated.
Thank-you in advance,
Deb Nugent.

Henry,
Many thanks and excellent suggestions. But I am still not able to get this to work and (once again) am stuck.
RE: Server Connections: When I check my server connection, I have not ticked SSL and am using the non-secure server port for my BOE system. When I click on u201CTest connectionu201D, I can successfully log in using my username / password on the SAP NetWeaver BW system. If I tick the SSL box without changing the port, I get the error message u201CFailed to establish a connection. The cause was u201CCannot connect to SAP BusinessObjects Enterprise at this time. Please try again later.u201D If I tick the SSL box and change the port to use the secure server port for the BOE system, I get the same error.
RE: Preferences: I am using the default settings under Preferences -> Network Settings. We do not manually configure proxy settings on our network so I have ticked u201CUse system proxy configurationu201D and under SSL settings, have ticked u201CUse system keystore / trust storeu201D. I have swapped keys between the BOE system and the SAP NetWeaver system but I have not swapped any keys between my PC and the BOE system or the SAP NetWeaver system (which I do not expect to do but am mentioning here in case I am wrong).
RE: BILaunchPad: I do not have any references for BILaunchPad. Is this u201CWeb Intelligence Rich Clientu201D? If so, I tried starting it, it reported an error: u201CAn error occurred at session creation.u201D Details showed u201CSSL mode is being requested but the following argument(s) are not present: passphrase (FWM 01012)u201D I went into the CMC and checked my SAP connections under Authentications. On the tab u201COptionsu201D, there is the section u201CSAP SSO Serviceu201D where I typed in the KeyStore password. When I created the key store file, I only specified a keystore password and did not specify a private key. Originally, I had it set with the private key blank with the correct password on the keystore. I also tried entering the same password as the private keystore and saving it. I verified that the connection services for Web Intelligence had restarted but I still am getting that same message when I try to start the Web Intelligence Rich Client.
At OS level on the BOE server, I logged in as my boe1 account and checked the parameters that can be entered for the PKCS12Tool.jar file that I used to create the ketstore file I had used. There does not appear to be an option for anything other than the keystore password. There is no private key password field listed.
I searched for the FWM 01012 error and found the HTML and PDF help files form SAP explaining errors. However, it only states u201CEnsure that all SSL arguments are presentu201D but gives no details as to what, exactly needs to be checked.
I will be talking with co-workers today to see if any of them can make sense of this (anoterh set of eyes sometimes helps). Any other suggestions about areas to look for addiitonal details / increased traces / logs?
Deb Nugent.

BusinessObjects Enterprise Client Tools XI 3.1 SP3 Connection Error

Hello everybody,
I installed BusinessObjects Enterprise XI 3.1 SP3 on the server, the server has Windows Server Enterprise 2007.
Locally, in my Laptop, I installed the BusinessObjects Enterprise Client Tools XI 3.1 SP3, but i can´t connect with the CMS using the Webi, or anyother tool to the server. I made everything that is in the administrator, installation and configuration guides, but reading the administrator guide for Query as a WebService I read that if you install the BusinessObjects Enterprise Tools you need a key license to us it, the question will be this.
Do i need a different license than the one what i use to install the BusinessObjects Enterprise on the server to install, connect and use the BusinessObjects Enterprise Client Tools XI 3.1 SP3 on every machine that i install and use for it????
Thanks and regards.

You do not need separate or additional license for the Client Tools.
Most often Client tools cannot connect to server components because :
1. CMS server is not running on the server
2. There is a firewall between Client machine and the server machine and firewall specific settings were not done. (Admin guide - working with firewalls section).

Error: com.crystaldecisions.celib.exception.c: ASSERTION FAILED

Post Author: floatsam
CA Forum: JAVA
Hi All, I'm trying to retrieve a report from infostore using code below: IInfoStore iStore = (IInfoStore)enterpriseSession.getService("InfoStore");IInfoObjects result = iStore.query("SELECT SI_KIND FROM CI_INFOOBJECTS WHERE SI_KIND = 'FullClient' AND SI_INSTANCE=0 AND SI_ID = 3664");I get the following error: com.crystaldecisions.celib.exception.c: ASSERTION FAILED at java.lang.Throwable.<init>(Throwable.java) at com.crystaldecisions.celib.exception.c.<init>(Unknown Source) at com.crystaldecisions.celib.trace.d.a(Unknown Source) at com.crystaldecisions.enterprise.ocaframework.k.a(Unknown Source) at com.crystaldecisions.celib.properties.Property.a(Unknown Source) at com.crystaldecisions.celib.properties.Property.getPropertyBag(Unknown Source) at com.crystaldecisions.celib.properties.PropertyBag.getPropertyBag(Unknown Source) at com.crystaldecisions.sdk.occa.pluginmgr.internal.a.getSecurityInfo(Unknown Source) at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.a(Unknown Source) at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.<init>(Unknown Source) at com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreFactory.makeOCCA(Unknown Source) at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source) at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source) at com.dcx.dealerconnect.ddpr.controller.WelcomeActionXI.execute(WelcomeActionXI.java) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110) at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174) at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313) at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116) at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283) at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42) at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530) at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176) at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79) at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201) at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71) at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182) at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334) at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56) at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610) at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java) I'm using Websphere 5.0 and Java sdk to access the report. I'm able to login to CMS correctly. I get this error when i retrieve the infostore. Anyone else had the same problem?Thanks.

I am facing the same problem . Anyone has the reason why this happens or the solution ?
Thanks in advance.

Where is BusinessObjects Enterprise Java SDK jars located(BO XI3.1)?

We need to import Business Objects Enterprise Java SDK's jar files. However, there is no document or forum post that have the directory for version BOXI3.1.
By searching for the cecore.jar file, we find a directory that contains many Business Objects Enterprise Java SDK jar files:
D:\Business Objects\BusinessObjects Enterprise 12.0\warfiles\WebApps\BusinessProcessBI\WEB-INF\lib
Is this the correct directory for the Business Object Enterprise jar files?
We imported bellow SDK jar files:
asn1.jar
cecore.jar
celib.jar
ceplugins_client.jar
ceplugins_core.jar
ceplugins_cr.jar
cereports.jar
certj.jar
cesession.jar
ceutils.jar
clientplugins.jar
commons-codec-1.3.jar
commons-logging-1.1.jar
corbaidl.jar
ebus405.jar
flash.jar
freessl201.jar
jsafe.jar
logging.jar
pluginhelper.jar
postprocessing_oca2service.jar
publishing_oca2service.jar
rasapp.jar
rascore.jar
reporttemplate.jar
serialization.jar
SL_plugins.jar
webreporting.jar
xbean.jar
xcelsius.jar
XcelsiusSLPlugins.jar
Is this the complete list that we should import for X3.1? there are some files like commons-codec-1.3.jar, it looks a Apache jar file, not the SDK's jar file. shall i include such files as well?

Don't know why I see this error when I am creating the SessionMgr object even though I have the CrystalDecisions.Enterprise.Framework and CrystalDecisions.Enterprise.InfoStore referenced:
SessionMgr sessionMgr = new SessionMgr();
Retrieving the COM class factory for component with CLSID {E063B04A-CB8B-460E-99D0-F7D8FA2FAAA2} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).

Missing files in BusinessObjects Enterprise 11.5/Web Content/bin folder?

I am getting the following error when I try to start BusinessObjects Enterprise .NET Administration Launchpad.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: File or assembly name uitoolkitweb, or one of its dependencies, was not found.
Source Error:
Line 193:               
Line 194:               <add verb="GET" path="EnterpriseImageHandler.aspx" type="CrystalDecisions.Enterprise.WebControls.EnterpriseImageHandler, CrystalDecisions.Enterprise.Web, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
Line 195:               <add verb="" path=".bouitoolkit" type="com.businessobjects.encyclopedia.uitoolkit.web.ToolkitHttpHandler, uitoolkitweb"/>
Line 196:          </httpHandlers>
Line 197:          
It seems it can't find a file or set of files in ///C:/Program Files/Business Objects/BusinessObjects Enterprise 11.5/Web Content/bin. I looked in this folder and the only file there is WCA_Enterprise.dll.
This all was working last week and I haven't run any updates so I'm not sure what happened to the files if, in fact, there were any to begin with.
Is there a simple way to get these files back?
Thanks,
Art

Hello Art,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

The dependency 'BusinessObjects.Enterprise.Sdk' could not be found.

Hi,
Can anyone help me solve this problem, its my first time using crystal reports
i have installed VS 2003 and Crystal report XI professional Edition, i am trying to run the system but it is complaining about the BusinessObjects.Enterprise.Sdk not found, I read from another post where they say crystal report XI comes with BOE sdk so i dont have to install it separately, so i was advised by someone to reinstall Crystal report but it didnt solve my problem.
i also have another error "The dependency 'CrystalDecisions.Enterprise.PluginManager' could not be found." which im assuming its caused by the sdk error.
Does anyone have an idea how to solve this problem?

Hello,
The Professional editions of Crystal Reports XI (v11.0) and Crystal Reports XIR2 (v11.5) are not development level products. This means your VS IDE didn't get updated to stand alone versions of the various Crystal assemblies. I would expect that the Crystal references in your VS2003 application are v9.1.5000 because CR XI/XR2 Professional doesn't update your IDE.
If you're trying to develop an application that interacts with a BusinessObjects Enterprise (BOE) system then you need to install the BOE .NET SDK onto your development machine. The BOE .NET SDK (for CR XI (v11.0) and CR XIR2 (v11.5)) has to be installed from the Enterprise installer media. It can not be downloaded.
You can install the BOE .NET SDK using the u201CServer Installu201D path after launching the BOE installer. Just choose Server Install u2013 you will need your BOE keycode. Next choose Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install to the development machine. This should allow you to work with the Enterprise .NET SDK.
When you are ready to deploy your .NET application you will also need to install the .NET SDK onto the Web application server (assuming it's not also your Enterprise server). This is because we are not fully managed by the .NET Framework.
Sincerely,
Dan Kelleher

Is com.businessobjects.sdk.ceutils.prompts.PromptsUtil deprecated ?

Hi
Is there a way to confirm if com.businessobjects.sdk.ceutils.prompts.PromptsUtil has been deprecated for BusinessObjects Enterprise XI 3.1 SP4 ?
I see the following posts saying that it could be a documentation error and it has not been deprecated for web intelligene but nothing specific to my version
BOE 3.1 Service Pack 2 SDK changes
Schedule webi with prompts problem
If it has been deprecated whats the correct way for populating webi prompts ?
Thanks

Our code is similar to what you have, but if we don't use the .refresh command, the new values are not populated on the report. Do you have any idea why? Our issue is that when it schedueles the report, it doesn't return quickly. It waits until the report is done. Here is our code:
public static void sendReport
(    IEnterpriseSession eSession,
String TstPrdFlag,
      int jobControlId,
      String docId,
      int format,
      String mimeType,
      String filepath
try
IInfoStore infoStore = (IInfoStore) eSession.getService("InfoStore");
//get WebI doc
IInfoObjects infoObjects = infoStore.query("Select TOP 1 * From CI_INFOOBJECTS Where "
                     + " SI_KIND='Webi' And SI_INSTANCE=0 "
                     + " And SI_ID = '" + docId + "'");
IWebi webi   = (IWebi) infoObjects.get(0);
ISchedulingInfo schedInfo = webi.getSchedulingInfo();
//============================================================================
     // Set Prompts
     //============================================================================
     if (webi.hasPrompts())
          try
               ReportEngine reportEngine = (ReportEngine) eSession.getService("WebiReportEngine");
               DocumentInstance docInst = (DocumentInstance) reportEngine.openDocument(webi.getID());
               docInst.refresh();
          Prompts prompts = docInst.getPrompts();
          for (int j = 0; j < prompts.getCount(); j++)
             // assumes only a single value per prompt - no MultiValues
                 Prompt prompt = prompts.getItem(j);
                 String [] vals = new String[1];
                 vals[0] = getParameter (TstPrdFlag, jobControlId, prompt.getName());
                 //System.out.println(prompt.getName()+ " " + vals[0]);
                 prompt.enterValues(vals);
          docInst.setPrompts();
                    docInst.refresh();
                    docInst.save();
                    //getSQL (docInst);
                    //DataProvider dp = docInst.getDataProviders().getItem(0); // retrieve the DataProvider that you would like the SQL for
                    //String sql = dp.getQuery().getSQL(); // the SQL out of the DataProvider
                    //System.out.println(sql);
                    //PromptsUtil.populateWebiPrompts(prompts, webi);
                    docInst.closeDocument();
             reportEngine.close();
          catch (REException e)
e.printStackTrace();
     //===========================================================================
     // Format as Excel or PDF
     //===========================================================================
     webi.getWebiFormatOptions().setFormat(format);
//===========================================================================
     // send to disk
     //===========================================================================
            //Get the destination object from schedulingInfo
     IDestination destinationObject = schedInfo.getDestination();
     //IDestinations destinations = schedInfo.getDestinations();
             //IDestination destinationObject = (IDestination) destinations.get(0);
             // Specify that we are writing to disk
             destinationObject.setName("CrystalEnterprise.DiskUnmanaged");
             // Get the Destination plug-in. Note that the SI_PARENTID will always be 29.
             IDestinationPlugin destinationPlugin = (IDestinationPlugin)
                       infoStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_NAME='CrystalEnterprise.DiskUnmanaged'").get(0);
             destinationObject.copyToPlugin(destinationPlugin);
             IDiskUnmanagedOptions diskUnmanagedOptions = (IDiskUnmanagedOptions) destinationPlugin.getScheduleOptions();
             diskUnmanagedOptions.getDestinationFiles().add(filepath);
             destinationObject.setFromPlugin(destinationPlugin);
//===========================================================================
     // Schedule WebI report to run once now
     //===========================================================================
     schedInfo.setRightNow(true);
     schedInfo.setType(CeScheduleType.ONCE);
// Tell the CMS to schedule the report.
infoStore.schedule (infoObjects);
} catch (SDKException e)
throw new Error ("Failed to schedule report. Exception caught: " + e.getMessage());

SAP BusinessObject Enterprise Versions support expiry info required

Dear All,
I am looking for SAP BusinessObject Enterprise all versions information and its expiry date.
Also just a query that, are below given softwares comes under or components of SAP BusinessOBject Enterprise?
1.Crystal Report
2.Crystal server
3.BusinessObject Web Intelligence
Please help me on it.
This is quite urgent, your help really very valuable to me.
Thanks,
Silambarasan.

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Problem with Publishing a project and BusinessObject.Enterprise.SDK.dll

I am trying to publish my Visual Basic Application and it comes up with an error of Unable to find file BusinessObject.Enterprise.Sdk.ziplib.netmodule of multi-file assembly BusinessObject.Enterpise.Sdk.dll. A file is there where it is looking for it but it is named BusinessObject.Enterprise.Sdk.ziplib.netmodule.bakSp1.
It is also giving me the same error with the folowing files:
BusinessObjects.Enterprise.Sdk.dll
BusinessObjects.Enterprise.Sdk.SS1.netmodule
BusinessObjects.Enterprise.Sdk.netmodule
All of the files are there but they end with a bakSp1
Does anyone have a clue as to what I am doing wrong?
Thanks for any advice

Are those assemblies in the GAC? They should have been added to the GAC with the install.
The bakSp1 suffix tag RTM files that were upgraded by installing Service Pack 1. There should be two files there - one with the bakSp1 (the backup) and one without.
It may be that your installation was misconfigured.
Sincerely,
Ted Ueda

Error while Updating Enterprise Link Plan in Design Studio

Hi, All
I am getting one Error while Creating Enterprise Link Plan in Design Studio of BAM and Failed to Create the Plan.
i.e.(IMessageSourceReceiver>messageReceive:javax.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found)
Setup:
Integration between Oracle EBS 11.5.10 and Oracle BAM 10.1.3.
I am trying to get the Raw Data and sending over to the Enterprise Link Plan.
1. Created bam_ttq AQ and bam_ttq_tab.
2. Configured all of the startup parameters required for Enterprise Message Source Type (Oracle (AS JMS and OJMS)) in the Administrator of BAM.
3. Configured the Oracle (AS JMS and OJMS) with the following values in the Enterprise Message Sources in the Architect of BAM.
Initial Context Factory : com.evermind.server.rmi.RMIInitialContextFactory.
JNDI Service Provider URL : opmn:ormi://inaportal.inatech.com:6004:home.
TopicConnectionFactory Name : java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab.
Topic Name : java:comp/resource/BAMTTT/Topics/bam_ttq.
JMS Message Type : Text Message.
Durable Subscriber Name (Optional) : Bamclient.
Message Selector (Optional) :
Client ID (Optional) : ClientId.
4. Also configured the data-sources.xml and applications.xml in OC4J (10.1.2) to reference the database schema where the BAM_TTQ queue is created.
5. Modified the jndi.properties file with required properties.
java.naming.security.principal = ias_admin
java.naming.security.credentials = inaportal321
java.naming.provider.url = opmn:ormi://inaportal.inatech.com:6004:home
java.naming.factory.initial = com.evermind.server.rmi.RMIInitialContextFactory
6. In the Design Studio I have a Plan with Oracle BAM Enterprise Message Receiver and Grid.
And when I am updating the plan I am getting the following error.
IMessageSourceReceiver->messageReceive: javax.naming.NameNotFoundException: java:comp/resource/BAMTTT/TopicConnectionFactories/bam_ttq_tab not found
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "EBS_Example" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Can anybody pls help me out with this? Its Urgent for Me
Thx
Renuka.
Message was edited by:
Renuka

hi renuka..were u able to resolve this issue with the naming exception....cheers...

Error In Oracle Enterprise Repository in IBM AIX 5.3

Hello,
I'm have installed:
Oracle Weblogic Server 11g (10.3.3)
Oracle Enterprise Repository 11g (11.1.1.3)
The installation is succefully but when i try access to http://10.1.1.218:7111/oer is empty !!
in the log apper:
$ tail -f nohup.out
JIT - r9_20091123_13891
GC - 20091111_AA)
JCL - 20091202_01
Starting WLS with line:
/usr/java6_64/bin/java -Xms128m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=oer_server1 -Djava.security.policy=/oracle/app/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -server -da -Dplatform.home=/oracle/app/Middleware/wlserver_10.3 -Dwls.home=/oracle/app/Middleware/wlserver_10.3/server -Dweblogic.home=/oracle/app/Middleware/wlserver_10.3/server -Dweblogic.management.discover=false -Dweblogic.management.server=http://snode938:7115 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/oracle/app/Middleware/patch_wls1033/profiles/default/sysext_manifest_classpath:/oracle/app/Middleware/patch_ocp353/profiles/default/sysext_manifest_classpath weblogic.Server
<Oct 28, 2011 7:06:22 PM GMT-04:30> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with IBM J9 VM Version 2.4 from IBM Corporation>
<Oct 28, 2011 7:06:22 PM GMT-04:30> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Oct 28, 2011 7:06:23 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 28, 2011 7:06:23 PM GMT-04:30> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 28, 2011 7:06:24 PM GMT-04:30> <Notice> <Log Management> <BEA-170019> <The server log file /oracle/app/Middleware/user_projects/domains/oer_domain/servers/oer_server1/logs/oer_server1.log is opened. All server side log events will be written to this file.>
<Oct 28, 2011 7:06:26 PM GMT-04:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 28, 2011 7:06:28 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 28, 2011 7:06:28 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 28, 2011 7:06:31 PM GMT-04:30> <Warning> <HTTP> <BEA-101369> <ServletContext@766848437[app:oer module:/oer path:/oer spec-version:null]: The encoding jsp-descriptor param has been deprecated. Consider declaring the encoding in the jsp-config element (web.xml) or as a page directive (pageEncoding) instead.>
INITIALIZING EXTERNAL EVENTING
running in single server mode
Intializing Thinkmap Server. Version: 2.6.051122173836X
Thinkmap Server initialized.
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.1.1.218:7111 for protocols iiop, t3, ldap, snmp, http.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "oer_server1" for domain "oer_domain" running in Production Mode>
OER: Asset Preload completed: 4982ms
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $
snode938:/oracle/app/Middleware/user_projects/domains/oer_domain/bin $ tail -f nohup.out
Intializing Thinkmap Server. Version: 2.6.051122173836X
Thinkmap Server initialized.
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.1.1.218:7111 for protocols iiop, t3, ldap, snmp, http.>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "oer_server1" for domain "oer_domain" running in Production Mode>
OER: Asset Preload completed: 4982ms
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 28, 2011 7:06:40 PM GMT-04:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 28, 2011 7:16:07 PM GMT-04:30> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppModuleOverviewPage&WebAppModuleOverviewPortlethandle=com.bea.console.handles.ModuleHandle%28%22com.bea%3AName%3Doer%2CType%3DAppDeployment%3Boer-web%3B%2Foer-web%3B%3Cnone%3E%3BWEBAPP%22%29.>
java.lang.Exception: Provider named 'SUN' not found
at com.flashline.crypto.EncryptedPassword.constructor(EncryptedPassword.java:125)
at com.flashline.crypto.EncryptedPassword.<init>(EncryptedPassword.java:74)
at com.flashline.crypto.EncryptedPassword.<init>(EncryptedPassword.java:38)
at com.flashline.enterprise.authentication.servlet.Login.service(Login.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:529)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at com.flashline.enterprise.authentication.EnterpriseSession.checkLogin(EnterpriseSession.java:441)
at com.flashline.cmee.jsp.CMEESession.checkLogin(CMEESession.java:254)
at com.flashline.cmee.jsp.CMEESession.checkLogin(CMEESession.java:250)
at com.flashline.cmee.jsp.CMEESession.checkLogin(CMEESession.java:249)
at jsp_servlet.__index._jspService(__index.java:130)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3686)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any idea ?
Thank.-
Post Data: I search any solution in My Oracle Support, and apply the only solution found here. But the issue persist...

if you see the log file it tells about saposcolSAPCAR: could not open for writing /usr/sap/IND/SYS/exe/run/saposcol (error 28). Text file busy
could you please check is there any SAPOSCOL process running?
that is why you are getting error as unpack was executed with status ERROR
cheers,
-Sunil

Error com.businessobjects.enterprise.fullclient.FullClient

Similar Messages

Maybe you are looking for