Error Configuring Common Server Settings

I'm trying to install several JES components, each one wants to configure the Common Server Settings first.
When I try to do so, I get the following error:
Error in Host IP Address
Valid Host IP Address Required.
The Host IP Address Provided could not be validated.
The services being installed required a valid Host IP Address.
Installation cannot proceed until a valid Host IP Address is provided.
The IP address I am using is 10.0.5.16. This is the IP address of the server I want to install the software on - obviously it is in the class C private IP space. I can't imagine how this would be "invalid".
I'm installing this on a RH Linux platform.
Help is appreciated. Thanks.

I was able to solve this problem by putting the host and domain information in /etc/hosts file:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain
#andrew_linux.msn00.oneamerica.com
#localhost andrew_linux
161.199.69.57 andrew_linux
161.199.69.57 andrew_linux.msn00.istotalcrap.com

Similar Messages

Configure Internal Server Settings

Hello,
I am trying to configure internal server settings and when I choose my LMS to be Internal Server and then click on the Configure button the first box that should show is Server as in the image below but I get Adobe ID: and Password: boxes. I do not understand what is going on. Please help.

Do the reporter and read php files have to be at the same level as the actual captivate file in the website?
I put the two files at the root directory level.
Thanks.

Trying to configure test server settings in DW8 and get error

I am trying to setup the test server settings so i can create
some
recordsets.. and everytime i complete the test server
settings page i get a
small box come up that says:
Macromedia Dreamweaver
! No Error Occurred.
OK
thats it.. i hit ok and the settings are there, but i still
cannot create
recordset...
ASP, SQL2005, DW8 VBScript

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

Error configure directory server 5.2

Hi,
I'm getting this error when doing issuing
bash-3.00# directoryserver configure
after installing Directory Server with Configure Later option
[slapd-elara]: starting up server ...
[slapd-elara]: [29/Aug/2009:10:40:37 +0100] - Sun Java(TM) System Directory
Server/5.2_Patch_4 B2005.230.0041 (64-bit) starting up
[slapd-elara]: [29/Aug/2009:10:40:38 +0100] - Listening on all interfaces port
389 for LDAP requests
[slapd-elara]: [29/Aug/2009:10:40:38 +0100] - slapd started.
Your new directory server has been started.
error: can't bind to server:Unable to bind to server. (Invalid credentials (49)
returned from ldap_simple_bind_s(cn=Directory Manager))
Could not configure server.
Configuration of the Directory Server failed.
Error Directory Server configuration failure
Error Configuration of the server(s) failed.
Can someone give me a hint?
Best regards

Problem solved.
1 - uninstalled Directory Server
/var/sadm/prod/SUNWds-entsys4/uninstall
2 - removed all the packages used in a manual instalation
for i in SUNWasha SUNWasvc SUNWasvcp SUNWasvr SUNWasvu SUNWdsha SUNWdsvcp SUNWdsvh SUNWdsvhx SUNWdsvpl SUNWdsvr SUNWdsvu SUNWdsvx SUNWicu SUNWicux SUNWjss SUNWldk SUNWldkx SUNWpr SUNWprx SUNWsasl SUNWsaslx SUNWtls SUNWtlsx; do echo $i;pkgrm $i;done
3 - re-install it with configure later option
java_es_05Q4_directory/Solaris_sparc/installer
4 - Configure Directory Server
directoryserver -u 5.2 configure
5 - Configure Administration Server
mpsadmserver configure
And everything started working.

LR3.3 error in common photo settings display

I observe this only with Canon G12: In many cases the Common Photo Settings display the "mm" unit and closing parenthesis in white without the otherwise common shadow, and the "mm)" will be repeated in black in the line below. This is a typical example of this malfunction:

Any comments ???

Error Configuring Portal Server 7.2 on a Fedora 8

Hi, i'm new on portal server and i have this problem while i'm configuring after installation.
This is the trace:
[#|2008-06-11T10:45:49.947-0500|INFO|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.port
al.fabric.config.ConfigurePortal; MethodName=main; |PSFB_CSPFC0048:Validating the Input Config XML File|#]
[#|2008-06-11T10:45:50.029-0500|INFO|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.port
al.fabric.config.ValidatePortalInputData; MethodName=validateComponentsToConfigure; |/opt/sun/portal/lib|#]
[#|2008-06-11T10:45:50.046-0500|INFO|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.port
al.fabric.config.ValidatePortalInputData; MethodName=validateComponentsToConfigure; |PSFB_CSPFC0241:Components to configure l
ist [portalserver, gateway, netletproxy, rewriterproxy] is valid.|#]
[#|2008-06-11T10:45:50.049-0500|GRAVE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.por
tal.fabric.config.ConfigurePortal; MethodName=main; |PSFB_CSPFC0014:Failed configuring Portal Server!!
java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:415)
at java.lang.Integer.parseInt(Integer.java:497)
at com.sun.portal.fabric.config.ValidatePortalInputData.<init>(ValidatePortalInputData.java:228)
at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:166)
|#]
thanks!!

I've installed a Fedora 8 for i386, i attempting to install it with 1gb of physical RAM and 2gb of swap (that's not enough, at least for install??).
I've too installed a glassfish-v2ur2 included into the package openesb, the access manager that i've installed is the version that is included into this glassfish. This trace is the output for the message:
Validating XML File
Configuration failed: null
can anyone can give a sample configuration file, with the data filled??

Configure commonly used settings for a cloud service

Hi All,
Have a question regarding Azure Cloud Service. If I change a cloud service setting (Cloud Service -> Configure) in the portal, does the change persist if or when an instance is re-imaged? For example, if I change the "DatabaseRetryCount"
parameter from 5 to 10 and save it, this change will update the runtime configuration. However, when Azure rebuild this role, is this change get carried over?
Thanks

In azure cloud services nothing is persistent, meaning that every time role instances are restarted or created, it will be created from the scratch and will pick up only those settings which you either have done in the role start up or defined as a start
up activity.
About azure cloud service configuration files, i.e. cscfg - you can specify the settings similar to what you define in web configuration file of your application, these settings can be read at run time and can be reffered in your custom code. If you add
/ update any setting from the portal - you should also do similar in cscfg file in your solution so that next time you upgrade the deployment, the updated settings will be deployed.
Read more information here - https://msdn.microsoft.com/en-us/library/azure/ee758710.aspx
Bhushan | Blog |
LinkedIn | Twitter

ColdFusion Server Settings box is blank

I finally got my copy of CFBuilder 2, and I've been trying to get it set up for my projects. When editing code, I have a "Firefox" and "IE" tab at the bottom of the editor window, but when I click on either one (or if I click on the green "Run" button in the toolbar), I get the following message:
Server is not configured with the project.
Along with instructions about how to configure the server settings. However, when I do (project->properties->ColdFusion Server Settings), that box is completely blank, other than the "Restore Defaults" and "Apply" buttons.
What gives?

Ok, somehow I managed to figure it out. I ended up with a double "http://" in the server path, so I nuked it and started over.
Now my problem is a 404 when I preview in my browser.
I have CF8 installed locally, running on localhost:8500. I have C:/ColdFusion8/wwwroot/ as my local path, and folders for each project under that (example: planning).
I'm assuming since my project path is C:/ColdFusion8/wwwroot/planning/ and my "Sample URL" is http://localhost:8500/planning/ that previewing the index.cfm file in that folder should give me the proper URL. But I get a "File not found" error.
I can browse to the file in Firefox and view it fine, so I suspect a pathing problem.

Error configuring and starting Managed Server in WebLogic 10.3

Hi,
I am able to configure and start the Managed Server on windows environment. I am trying to configure Managed Server on linux environment. I am configuring the Managed Server with custom keystore. When I configured the Managed Server I specified the keystore/trustsote information in the Keystores tab of the Admin Console for Managed Server settings. Specified Private Key Alias, Password in SSL tab.But when I am starting the Managed Server from command line, I see the process looking for demo trust files and failing.
Here is the command I run to start the Managed Server:
./startManagedWebLogic.sh MyManagedServer1 https://localhost.localdomain:8443
Below is the console output:
<Mar 11, 2015 12:37:44 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.45-b01 from Sun Microsystems Inc.>
<Mar 11, 2015 12:37:45 PM PDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:beaadmin
Enter password to boot WebLogic server:
<Mar 11, 2015 12:37:53 PM PDT> <Info> <Security> <BEA-090908> <Using default WebLogic SSL Hostname Verifier implementation.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks.>
<Mar 11, 2015 12:37:53 PM PDT> <Error> <Security> <BEA-090132> <Could not open the keystore file /opt/wlserver_10.3/server/lib/DemoTrust.jks for read access. Exception: java.io.FileNotFoundException: /opt/wlserver_10.3/server/lib/DemoTrust.jks (No such file or directory)>
<Mar 11, 2015 12:37:53 PM PDT> <Warning> <Security> <BEA-090164> <Failed to load trusted certificates from keystore /opt/wlserver_10.3/server/lib/DemoTrust.jks of type jks>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file /opt/jre1.6.0_45/lib/security/cacerts.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 11, 2015 12:37:53 PM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:54 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Warning> <Security> <BEA-090477> <Certificate chain received from localhost.localdomain - 127.0.0.1 was not trusted causing SSL handshake failure.>
<Mar 11, 2015 12:37:55 PM PDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at https://localhost.localdomain:8443.>
<Mar 11, 2015 12:37:55 PM PDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 11, 2015 12:37:55 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320400> <The log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log00015. Log messages will continue to be logged in /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log.>
<Mar 11, 2015 12:37:55 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /h/data/local/base_domain/servers/MyManagedServer1/logs/MyManagedServer1.log is opened. All server side log events will be written to this file.>
<Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090837]The configured keystore location for the PKI Credential Mapper is either null or empty.>
<Mar 11, 2015 12:37:56 PM PDT> <Error> <Security> <BEA-000000> <[Security:090815]The password provided for the keystore configured for the PKICredential Mapper was null.>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 11, 2015 12:37:57 PM PDT> <Critical> <Security> <BEA-090403> <Authentication for user beaadmin denied>
<Mar 11, 2015 12:37:57 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
weblogic.security.SecurityInitializationException: Authentication for user beaadmin denied
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User beaadmin weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
        at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
        at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        Truncated. see log file for complete stacktrace
>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Mar 11, 2015 12:37:57 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Mar 11, 2015 12:37:57 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Why is it looking for demotrust.jks file to start the Managed Server. We don't use the demo trust and cannot copy to the location it is referring to. I followed the solution provided at the below link:
http://serverfault.com/questions/106499/custom-trust-and-custom-identity-keystore-in-weblogic-10-3
There are 2 options given in the link. To update the boot.properties of the Admin Server and appending JAVA_OPTIONS to DomainEnv file. Both of these caused the failure of Admin Server. I couldn't bring up the server after these changes.I also came across posts talking about boot.properties for Managed Server. I don't see the security folder that has boot.properties for my Managed Server (verified it on both windows and linux boxes).
Thanks in advance.
-nn.

Hi Faisal,
Here is the config.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd"
        xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security"
        xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <name>JCRMDomain</name>
    <domain-version>10.3.4.0</domain-version>
    <security-configuration xmlns:xacml="http://xmlns.oracle.com/weblogic/security/xacml">
        <name>JCRMDomain</name>
        <realm>
            <sec:authentication-provider xsi:type="wls:default-authenticatorType">
                <sec:control-flag>SUFFICIENT</sec:control-flag>
            </sec:authentication-provider>
            <sec:authentication-provider xmlns:ext="http://xmlns.oracle.com/weblogic/security/extension" xsi:type="ext:jcrm-authenticatorType">
                <sec:name>JcrmAuthenticator</sec:name>
                <sec:control-flag>SUFFICIENT</sec:control-flag>
            </sec:authentication-provider>
            <sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
            <sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
            <sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
            <sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
            <sec:credential-mapper xsi:type="wls:pki-credential-mapperType">
                <sec:name>PKICredentialMapper</sec:name>
            </sec:credential-mapper>
            <sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
            <sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
            <sec:user-lockout-manager>
                <sec:lockout-threshold>3</sec:lockout-threshold>
                <sec:lockout-duration>15</sec:lockout-duration>
                <sec:lockout-reset-duration>99999</sec:lockout-reset-duration>
            </sec:user-lockout-manager>
            <sec:deploy-role-ignored>false</sec:deploy-role-ignored>
            <sec:deploy-policy-ignored>false</sec:deploy-policy-ignored>
            <sec:fully-delegate-authorization>true</sec:fully-delegate-authorization>
            <sec:security-dd-model>DDOnly</sec:security-dd-model>
            <sec:combined-role-mapping-enabled>true</sec:combined-role-mapping-enabled>
            <sec:name>myrealm</sec:name>
            <sec:delegate-m-bean-authorization>false</sec:delegate-m-bean-authorization>
            <sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator"
                                    xsi:type="pas:system-password-validatorType">
                <sec:name>JCRMPasswordValidator</sec:name>
                <pas:max-password-length>31</pas:max-password-length>
                <pas:min-password-length>15</pas:min-password-length>
                <pas:min-numeric-characters>2</pas:min-numeric-characters>
                <pas:min-lowercase-characters>2</pas:min-lowercase-characters>
                <pas:min-uppercase-characters>2</pas:min-uppercase-characters>
                <pas:min-non-alphanumeric-characters>2</pas:min-non-alphanumeric-characters>
            </sec:password-validator>
            <sec:deployable-provider-synchronization-enabled>false</sec:deployable-provider-synchronization-enabled>
        </realm>
        <default-realm>myrealm</default-realm>
        <credential-encrypted>{AES}cpwhv2peqwl0Z8Ma1Jk7KlmC6d1gtCAqxnzrmR5ssybHpM9AUzbBRJ7rE7m4/7U16IHgsTMkcOr/5/abZJ4NeuHR45jdDK1EjFmnUuPssISmGkan3EIpCKHmPPIynVxh</credential-encrypted>
        <node-manager-username>wdUXiuwL5A</node-manager-username>
        <node-manager-password-encrypted>{AES}UDiZjaLOrm0y+/I9noQVURudpzmRKMBOQR2B8ofNIt8=</node-manager-password-encrypted>
    </security-configuration>
    <server>
        <name>AdminServer</name>
        <max-http-message-size>10000000</max-http-message-size>
        <ssl>
            <name>AdminServer</name>
            <enabled>true</enabled>
            <hostname-verifier xsi:nil="true"></hostname-verifier>
            <hostname-verification-ignored>true</hostname-verification-ignored>
            <client-certificate-enforced>false</client-certificate-enforced>
            <listen-port>8443</listen-port>
            <two-way-ssl-enabled>true</two-way-ssl-enabled>
            <server-private-key-alias>localhost.localdomain</server-private-key-alias>
            <server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
            <ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
            <allow-unencrypted-null-cipher>false</allow-unencrypted-null-cipher>
            <use-server-certs>true</use-server-certs>
            <jsse-enabled>true</jsse-enabled>
        </ssl>
        <listen-port-enabled>false</listen-port-enabled>
        <web-server>
            <keep-alive-secs>60</keep-alive-secs>
            <https-keep-alive-secs>60</https-keep-alive-secs>
        </web-server>
        <listen-address/>
        <java-compiler>javac</java-compiler>
        <tunneling-enabled>true</tunneling-enabled>
        <tunneling-client-ping-secs>45</tunneling-client-ping-secs>
        <tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
        <client-cert-proxy-enabled>false</client-cert-proxy-enabled>
        <key-stores>CustomIdentityAndCustomTrust</key-stores>
        <custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
        <custom-identity-key-store-type>JKS</custom-identity-key-store-type>
        <custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
        <custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
        <custom-trust-key-store-type>JKS</custom-trust-key-store-type>
        <custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
    <overload-protection>
      <panic-action>system-exit</panic-action>
      <failure-action>force-shutdown</failure-action>
      <server-failure-trigger>
        <max-stuck-thread-time>600</max-stuck-thread-time>
        <stuck-thread-count>3</stuck-thread-count>
      </server-failure-trigger>
    </overload-protection>
    </server>
    <server>
      <name>MyManagedServer1</name>
      <ssl>
        <enabled>true</enabled>
        <listen-port>8445</listen-port>
        <server-private-key-alias>localhost.localdomain</server-private-key-alias>
        <server-private-key-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</server-private-key-pass-phrase-encrypted>
      </ssl>
      <machine xsi:nil="true"></machine>
      <listen-port>8444</listen-port>
      <listen-port-enabled>true</listen-port-enabled>
      <cluster xsi:nil="true"></cluster>
      <web-server>
        <web-server-log>
          <number-of-files-limited>false</number-of-files-limited>
        </web-server-log>
      </web-server>
      <listen-address></listen-address>
      <key-stores>CustomIdentityAndCustomTrust</key-stores>
      <custom-identity-key-store-file-name>certstores/keystore</custom-identity-key-store-file-name>
      <custom-identity-key-store-type>JKS</custom-identity-key-store-type>
      <custom-identity-key-store-pass-phrase-encrypted>{AES}eZnL/NM4/xJaFj8rZAE4oB2htDm3srPUsTWYtDXblvk=</custom-identity-key-store-pass-phrase-encrypted>
      <custom-trust-key-store-file-name>certstores/truststore</custom-trust-key-store-file-name>
      <custom-trust-key-store-type>JKS</custom-trust-key-store-type>
      <custom-trust-key-store-pass-phrase-encrypted>{AES}uSkLzfC74bMCEjomgVdHtVw47iZg8BN71g7cdKr+XHo=</custom-trust-key-store-pass-phrase-encrypted>
      <data-source>
        <rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
      </data-source>
    </server>
    <production-mode-enabled>false</production-mode-enabled>
    <embedded-ldap>
        <name>JCRMDomain</name>
        <credential-encrypted>{AES}LNAnq4qCQQmy9rCOMN+uIZVPq1bVvPrwQqqtOScZrnYmwESt9aruHNVy4IjqMWz7</credential-encrypted>
    </embedded-ldap>
    <administration-port-enabled>true</administration-port-enabled>
    <configuration-version>10.3.4.0</configuration-version>
    <admin-server-name>AdminServer</admin-server-name>
</domain>
It has 'CustomIdentityAndCustomTrust' for both Admin Server as well as managed Server in it.
Thanks,
nn

Error during Backup/Recovery settings configuration

Hi all,
Using the Oracle Enterprise Manager 10g Application Server control,
i am configuring backup/recovery settings for my infrastructure tier in a 10g Rel 2 application server environment. however after specifying the various locations for Log Files, Configuration files, Metadata repository database backup etc i get the following error after clicking the 'Ok' button.
An Internal Error has occurred while performing the operation.
Performing configuration ...
oracle_sid: cinfra
The command /oracle/appn/oracle/infra/perl/bin/perl /oracle/appn/oracle/infra/backup_restore/bkp_restore.pl -m configure -h /oracle/appn/oracle/infra -f > /infrahome/backups/log_files/2009-12-06_17-13-38_output.log failed with return code 255
i am at a loss as to why i am having this error and how to fix it.
I examined the log file and saw an error snippet saying
*"Unable to get dbid from the database. Please ensure that ORACLE_HOME and ORACLE_SID are set to the same values used when starting up the database and that the database is open.... Failure: Configure failed"*
Also examined another file generated at the same time as the output log file and in there i saw the following
*"ld,so.1: oracle: fatal: relocation error: file /oracle/appn/oracle/product/10.2.0/cm2t/lib/libjox10.so: symbol kgestKguard_: referenced symbol not found*
*ERROR:*
*ORA-12547: TNS: lost contact*
*SP2-0751: Unable to connect to oracle. exiting SQL*Plus"*
Apart from the infrastructure database, i have another database with SID 'cm2t' on the same machine and i am suspecting that OEM Application server control is referencing the wrong file while it's doing it's work. How do i tell it to look in the right place if indeed that is the cause of my problem?
In my config.inp file all the right parameter values are in place.
Thanks.
Steve.

Hi AMN,
Thanks for your reply. I managed to solve it by taking the following steps.
I use the runstartupconsole.sh script to start up my infrastructure tier. At startup it was using an LD_LIBRARY_PATH pointing to that used by an existing Oracle database instance on the same machine.
I set ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH etc correctly before running the runstartupconsole.sh script and after that i was able to setup my backup/recovery settings properly.
I hope this will be useful to others.
Steve.

Error message while i am trying to configure app server domain in PT 8.48.1

Team,
I am getting below error message while i am trying to configure app server domain in PT 8.48.16. I have uninstall TUXEDO 8.1 and then install 3 times. But, no luck.
Enter domain name to create
:CRPROD
Merging old domain configuration file with new template file...
source C:\Documents and Settings\psadmin\Desktop\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!

I get below error when i try to create a domain from import a file option.
PeopleSoft Import Application Server Configuration
1) Import from file
2) Import from application domain
q) Quit
Command to execute (1-2, q) : 1
Enter full path to configuration file
:E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
Enter domain name to create
:CRPROD1
Application Server domain CRPROD1 already exists...
1) Replace existing domain
2) Enter different domain name
q) Quit
Command to execute (1-2, q) : 2
Enter different name for domain: CRPROD
Merging old domain configuration file with new template file...
source E:\psoft\PT848_bkp\appserv\CRPROD1\psappsrv.cfg
template E:\psoft\PT848\appserv\large.cfx
destination E:\psoft\PT848\appserv\CRPROD\psappsrv.cfg
Creating domain folder CRPROD...
Copy psappsrv.ubx to CRPROD\psappsrv.ubx failed!
psappsrv.ubx
and when i try to crearte a domain with " create a domain " option , i got below error message.
PeopleSoft Application Server Administration
1) Administer a domain
2) Create a domain
3) Delete a domain
4) Import domain configuration
q) Quit
Command to execute (1-4, q) : 2
Please enter name of domain to create :CRPROD1
Configuration templates:
1) developer
2) large
3) medium
4) small
Select config template number: 2
Creating domain...
Copying application server configuration files...
Stripping Annotations...
Copy psappsrv.ubx to CRPROD1\psappsrv.ubx failed!
Copy psasnt.val to CRPROD1\psappsrv.val failed!
Copy psappsrv.psx to CRPROD1\psappsrv.psx failed!
Copying Jolt repository file...
Copy jrepository to CRPROD1\ failed!
Domain created.
Would you like to configure this domain now? (y/n) [y] :Y
Error opening file 'psappsrv.ubx':
Error opening file 'psappsrv.ubx':
Quick-configure menu -- domain: CRPROD1
Features Settings
========== ==========
Actions
=========
1) Load config as shown
2) Custom configuration
h) Help for this menu
q) Return to previous menu
HINT: Enter 3 to edit DBNAME, then 1 to load

Configuring Application server on windows (CMDTUX_CAT:16855 error)

Hi there,
My environment specs:
OS: Windows 2008
DB: SQL Server 2008 with SP2
Oracle software installed:
1. JRockit JDK R28.1 for Java SE 6 with JRockit Mission Control 4.0.1 for Microsoft Windows
2. Oracle WebLogic Server 11gR1 (10.3.4) Generic and Coherence
3. Tuxedo 10gR3 for MS Windows Server 2008 wMS VS 2008 x86 32-bit (NO RP043 patch installed)
4. PeopleSoft 8.52
5. PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 Feature Pack
6. Database Configuration wizard completed successfully with following warning. (Setup has detected that the PeopleTools version does not match the version in the installed database. The database may not be created successfully. Please check the log file(s) located under the log directory for details.)
7. I was configuring the Application Server based on the installation guide from Oracle and I ran into this error.
Any help is greatly appreciated.
Below is the log:
PeopleSoft Domain Administration
Domain Name: HR84
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) : 1
PeopleSoft Domain Boot Menu
Domain Name: HR84
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 2
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level (none)Booting admin processes ...
exec BBL -A :
process id=3704 ... Started.
1 process started.
Attaching to active bulletin board.
Attempting to boot ...INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level (none)
Booting server processes ...
exec PSWATCHSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 45196 -D HR84 -S
PSWATCHSRV :
process id=2596 ... Started.
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D HR84 -
S PSAPPSRV :
process id=2668 ... Started.
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D HR84 -
S PSAPPSRV :
process id=2776 ... Started.
exec PSSAMSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSSAMSRV :
process id=3756 ... Started.
exec PSANALYTICSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSANAL
YTICSRV :
process id=1736 ... Started.
exec PSANALYTICSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSANAL
YTICSRV :
process id=2324 ... Started.
exec PSANALYTICSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSANAL
YTICSRV :
process id=1640 ... Started.
exec PSMONITORSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 45196 -D HR84
-S PSMONITORSRV :
process id=4048 ... Started.
8 processes started.
Checking process startup status. This may take up to 120 seconds.
Please wait...
INFO: Oracle Tuxedo, Version 10.3.0.0 with VS2008, 32-bit, Patch Level (none)
Booting server processes ...
**exec PSRENSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -D HR84 -S PSRENSRV :**
**CMDTUX_CAT:1685: ERROR: Application initialization failure**
**tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha**
**ndler**
**tmshutdown -qy**
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
Do you wish to see the error messages in the domain log file? (y/n) [n] :y
PSADMIN.3552 (0) [12/06/11 13:20:19](0) Begin boot attempt on domain HR84
PSAPPSRV.2776 (0) [12/06/11 13:20:31](0) PeopleTools Release 8.52 (WinX86) start
ing. Tuxedo server is APPSRV(99)/1
PSAPPSRV.2776 (0) [12/06/11 13:20:31](0) Cache Directory being used: C:\Users\Ad
ministrator\psft\pt\8.52\appserv\HR84\CACHE\PSAPPSRV_1\
PSSAMSRV.3756 (0) [12/06/11 13:20:31](2) Min instance is set to 1. To avoid loss
of service, configure Min instance to atleast 2.
PSSAMSRV.3756 (0) [12/06/11 13:20:31](0) PeopleTools Release 8.52 (WinX86) start
ing. Tuxedo server is APPSRV(99)/100
PSAPPSRV.2668 (0) [12/06/11 13:20:31](0) PeopleTools Release 8.52 (WinX86) start
ing. Tuxedo server is APPSRV(99)/2
PSAPPSRV.2668 (0) [12/06/11 13:20:31](0) Cache Directory being used: C:\Users\Ad
ministrator\psft\pt\8.52\appserv\HR84\CACHE\PSAPPSRV_2\
PSSAMSRV.3756 (0) [12/06/11 13:20:32](0) Cache Directory being used: C:\Users\Ad
ministrator\psft\pt\8.52\appserv\HR84\CACHE\PSSAMSRV_100\
PSAPPSRV.2668 (0) [12/06/11 13:20:32](1) GenMessageBox(0, 0, M): Security Table
Manager (Get): The database is at release 8.50. The PeopleTools being run requi
re databases at release 8.52.
PSAPPSRV.2668 (0) [12/06/11 13:20:32](0) Server failed to start
PSSAMSRV.3756 (0) [12/06/11 13:20:32](1) GenMessageBox(0, 0, M): Security Table
Manager (Get): The database is at release 8.50. The PeopleTools being run requi
re databases at release 8.52.
PSSAMSRV.3756 (0) [12/06/11 13:20:32](0) Server failed to start
PSAPPSRV.2776 (0) [12/06/11 13:20:32](1) GenMessageBox(0, 0, M): Security Table
Manager (Get): The database is at release 8.50. The PeopleTools being run requi
re databases at release 8.52.
PSAPPSRV.2776 (0) [12/06/11 13:20:32](0) Server failed to start
PSRENSRV.3148 [12/06/11 13:22:33](0) PeopleTools Release 8.52 (WinX86) starting.
Tuxedo server is RENGRP(92)/101
PSRENSRV.3148 [12/06/11 13:22:33](3) Switching to new log file C:\Users\Administ
rator\psft\pt\8.52\appserv\HR84\LOGS\PSRENSRV_1206.LOG
PSADMIN.3552 (0) [12/06/11 13:22:40](0) End boot attempt on domain HR84
Do you wish to see the error messages in the Tuxedo log file? (y/n) [n] : y
132019.WIN2K8!PSADMIN.3552: Begin attempt on domain HR84
132023.WIN2K8!tmadmin.2936.3292.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
132025.WIN2K8!tmboot.2480.1216.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132025.WIN2K8!tmboot.2480.1216.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
to 120 seconds
132025.WIN2K8!tmboot.2480.1216.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL op
tion is selected
132027.WIN2K8!BBL.3704.3912.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS2008,
32-bit, Patch Level (none)
132027.WIN2K8!BBL.3704.3912.0: LIBTUX_CAT:262: INFO: Standard main starting
132029.WIN2K8!tmboot.3816.1772.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132029.WIN2K8!tmboot.3816.1772.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
to 120 seconds
132029.WIN2K8!tmboot.3816.1772.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL op
tion is selected
132030.WIN2K8!PSWATCHSRV.2596.1992.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with
VS2008, 32-bit
132030.WIN2K8!PSWATCHSRV.2596.1992.-2: LIBTUX_CAT:262: INFO: Standard main start
ing
132031.WIN2K8!PSAPPSRV.2776.404.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132031.WIN2K8!PSAPPSRV.2776.404.0: LIBTUX_CAT:262: INFO: Standard main starting
132031.WIN2K8!PSAPPSRV.2668.764.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132031.WIN2K8!PSAPPSRV.2668.764.0: LIBTUX_CAT:262: INFO: Standard main starting
132031.WIN2K8!PSSAMSRV.3756.756.0: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132031.WIN2K8!PSSAMSRV.3756.756.0: LIBTUX_CAT:262: INFO: Standard main starting
132031.WIN2K8!PSANALYTICSRV.2324.2760.0: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132031.WIN2K8!PSANALYTICSRV.2324.2760.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
132031.WIN2K8!PSANALYTICSRV.1640.2796.0: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132031.WIN2K8!PSANALYTICSRV.1640.2796.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
132032.WIN2K8!PSANALYTICSRV.1736.2452.0: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132032.WIN2K8!PSANALYTICSRV.1736.2452.0: LIBTUX_CAT:262: INFO: Standard main sta
rting
132032.WIN2K8!PSMONITORSRV.4048.1804.-2: 12-06-2011: Tuxedo Version 10.3.0.0 wit
h VS2008, 32-bit
132032.WIN2K8!PSMONITORSRV.4048.1804.-2: LIBTUX_CAT:262: INFO: Standard main sta
rting
132032.WIN2K8!PSANALYTICSRV.1736.2452.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132032.WIN2K8!PSANALYTICSRV.1640.2796.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132032.WIN2K8!PSAPPSRV.2668.764.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132032.WIN2K8!PSSAMSRV.3756.756.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132032.WIN2K8!PSMONITORSRV.4048.1804.-2: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132032.WIN2K8!PSAPPSRV.2776.404.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132032.WIN2K8!PSANALYTICSRV.2324.2760.0: LIBTUX_CAT:250: ERROR: tpsvrinit() fail
ed
132233.WIN2K8!tmboot.3640.2792.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS20
08, 32-bit
132233.WIN2K8!tmboot.3640.2792.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set
to 120 seconds
132233.WIN2K8!tmboot.3640.2792.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL op
tion is selected
132233.WIN2K8!PSRENSRV.3148.1988.-2: 12-06-2011: Tuxedo Version 10.3.0.0 with VS
2008, 32-bit
132233.WIN2K8!PSRENSRV.3148.1988.-2: LIBTUX_CAT:262: INFO: Standard main startin
g
132233.WIN2K8!PSRENSRV.3148.1988.-2: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
132233.WIN2K8!tmboot.3640.2792.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error en
countered; initiating user error handler
132237.WIN2K8!BBL.3704.3912.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
132240.WIN2K8!PSADMIN.3552: End boot attempt on domain HR84
Press Enter to continue...
PeopleSoft Domain Administration
Domain Name: HR84
1) Boot this domain
2) Domain shutdown menu
3) Domain status menu
4) Configure this domain
5) TUXEDO command line (tmadmin)
6) Edit configuration/log files menu
7) Messaging Server Administration menu
8) Purge Cache
9) Preload Cache
10) Clean IPC resources of this domain
q) Quit
Command to execute (1-10, q) :

When i checked the event log i see the following errors:
Pid 3108: server failed to startup because SgnDBSignon() failed.
Pid 2224: server failed to startup because SgnDBSignon() failed.
Pid 3716: server failed to startup because SgnDBSignon() failed.
Below is my domain configs
Quick-configure menu -- domain: HR84
Features Settings
========== ==========
1) Pub/Sub Servers : No 16) DBNAME :[HC]
2) Quick Server : No 17) DBTYPE :[MICROSFT]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : Yes 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[HR84]
6) WSL : Yes 21) AddToPATH :[C:\Program Files\Microsoft SQL S
erver\100\Tools\Binn]
7) PC Debugger : No 22) ConnectID :[PSCID]
8) Event Notification: Yes 23) ConnectPswd:[P@ssw0rd]
9) MCF Servers : No 24) ServerName :[WIN2K8]
10) Perf Collator : No 25) WSL Port :[7000]
11) Analytic Servers : Yes 26) JSL Port :[9000]
12) Domains Gateway : No 27) JRAD Port :[9100]
Actions
=========
13) Load config as shown
14) Custom configuration
15) Edit environment settings
h) Help for this menu
q) Return to previous menu
HINT: Enter 15 to edit DBNAME, then 13 to load
Enter selection (1-27, h, or q):
Edited by: 897150 on Dec 6, 2011 11:30 AM
Edited by: 897150 on Dec 6, 2011 11:31 AM

Configure Server Settings

when i configure server settings in adobe flash 4.6 builder with Livecycle Data services 3.1 then i get the error as "Only LiveCycle Data Services 2.6 and higher are supported."
please help me out.

Thanks for answering my question, so it appears I should not worry about email scanning

Thunderbird TORbirdy configuration with email server settings???

When I add my hotmail email account to thunderbird it is working fine i can send and receive emails. When i then proceed to add on Torbirdy it will still work. However, when I try to add a hotmail email account after Torbirdy has been added on to thunderbird it doesn't work properly, i can still send emails but i can not receive messages in my inbox. This is strange because i checked the server settings and everything is correct.
When i add my bitmessage email account to thunderbird it is working fine also and i can send and receive emails. When i add on torbirdy it will still work. When i try to add a bitmessage account after Torbirdy has been added on to thunderbird it doesn't work at all, meaning i can't send or receive emails i just get that error SMTP not configured properly or something like that.
Does anybody have this same problem or know what might be going on here because i have tried just about everything and nothing is working for me.
thanks

torbirdy have their own support site here https://www.torproject.org/about/contact.html

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

Error Configuring Common Server Settings

Similar Messages

Maybe you are looking for