Error : Cost center

Hi guys,
I do have queries regarding cost center in MM
i have encoured a error during MB1A process
and if i give my own cost center
it says that
error: Do not assign to cost center (not active in CO area JNNO and FYear 2008 )
what are the steps can be taken to slove tis problem?
Regards
Jino

HI
error: Do not assign to cost center (not active in CO area JNNO and FYear 2008 )
Means for CO: Controlling Area JNNO the FICO consultant need to open the costcenter linked with the Controlling Area for posting in the financila year 2008.
Ask your FI guy he can do it in OKKP and OKB9
Reward if usefull
Regards
Sujoy
Edited by: SUJOY KUMAR PAL on Apr 23, 2008 8:30 AM

Similar Messages

  • Error :- Cost Center locked for Primary Postings.

    Dear ,
    All Experts.
    While posting in SRM creating shopping cart I got this error
    Cost center CA00/10010005 locked for primary postings at this time
    Could any one please tell me how reolve this issue ?
    Currently if I go to cost center master data Control Tab - All options are tickd.
    And cost center category is S - Sales.
    Experts guidance will be great on this.
    Regards,
    Sharvari Joshi.
    Moderator: Please, avoid asking basic questions

    Dear,
    Ajay.
    Thanks for your quick reply.
    1 ) There is option given
    1 ) Actual Primary Cost
    2 ) Plan Primary Costs
    Which one to untick ?
    2 ) what is locking logic ?
    Select = Lock
    Unselect = Unlock
    Is it ?
    Regards,
    Sharvari Joshi.

  • Error in Cost Center Hierarchy

    Dear all,
    When I delete all cost center in standard hierarchy by tcode OKC4, some cost centers still appear in cost center hierarchy with activation status is "red". How to delete all cost center with "red" activation status in this case ?
    When I check these cost centers by tcode KS02 or KS03, the system raises information "No data exist"  but when I create cost center with the same code by tcode OKEON, the system raise error "Cost center already exist".
    So how to solve the problem ? I want to clear all the cost center in standard hierarchy and create again in DEV (No transaction data existed).
    Thank you very much,
    Dat Lam

    Hi,
    Go to OKEON - Menu - Extras - Hierarchy-Master Data - Comparison and see what's the output. Genrally, you are not supposed to delete cost centres from the standard hierarchy.
    Regards,
    Eli

  • BAPI_ACC_DOCUMENT_POST : getting cost center error

    Hi guys,
    regarding GL posting, I am using the BAPI_ACC_DOCUMENT_POST.
    I am uploading file with so many fields. I am able to upload properly.
    But, I am getting error only with cost center.
    error: "Cost center 512401 does not exist on 2009/07/31.  "
    actually, cost center exists and functional consultant showed me and he uploaded the record manually.
    when i post manually using FB01 t code, I am able upload correctly.
    I tried to debug, but it is taking more than 2 hours, as it is standard BAPI.
    Please help me if any body come across this situation.

    Hi ,
        please check this thread will provide you some insight on the BAPi.
    LINK:[Thread1|HOW TO PROGRAM THE ERRORS IN POSTING A DOCU USING BAPI_ACC_DCOCUMENT_POST;.
    Link:[Thread2|https://wiki.sdn.sap.com/wiki/display/ABAP/TransferMROrelatedGLBalances]
    Hope your query resolves quickly.
    Have a best day ahead.

  • Assign Cost Center for Internal Consumption in Sales Order

    Dear Experts,
    I have a scenario is that Marketing Manager want to give a gift to his customer, the expense of this gift will be charged to Marketing Department. As the law, the invoice of this gift is required with the posting as below:
    Dr Expense acc 5000 USD
    Cr Revenue acc 5000 USD
    (Assume that there is no tax)
    I create a Sales Order with the Product is the Gift that will give to customer, and I also assign the Cost Center as Marketing Department. The problem is when I generate the billing document from this Sales Order, the system throw the error: Cost Center XYZ (Marketing Department) is not allowed posting revenue. This error happen because I don't want to post revenue to Cost Center, I want only Expense will be posted to Cost Center. But because I assigned Cost Center in header of Sales Order, system will post both revenue an expense to this CO object. Now what I want to do is post Expense to Cost Center, revenue to Profit Segment. Is it possible and what I need to do if it is possible?    
    Regards
    Truc Nguyen

    please try this.
    please maintain revenue account in account determination
    orgdist.cust a/cass. groumaterial acc.assi. groupaccount key. and revenue account.
    Gajanan

  • F-92 posting error- Cost centre locked for revenue posting

    Hello,
    While I am trying to post F-92 (Asset Retirment), I get the following error:
    "Cost center AR011001 in controlling area 1000 is locked for revenue postings on 25.11.2009."
    How do I go ahead?
    Thanks,

    Hi Eli,
    Thanks for the quick response.
    I am aware I can remove the lock indicator in the cost centre master data.  We had earlier uploaded cost centre master data through LSMW .
    My question is  once the lock is removed , we will be able to go ahead and post to the cost centre .The Gl account used here is CLEARING REVENUE ACCOUNT FIXED ASSET and when we assign the cost centre with lock indicator we get the message
    "Cost center AR011001 in controlling area 1000 is locked for revenue postings on 25.11.2009"
    Would like to know the impact (apart from effect on reporting) once the lock indicator is removed.
    Thanks,

  • Cost center missing for pers. no

    Hi,
    While prosting exps in TC: TRIP, we are getting the error "Cost center missing for pers. no". After analyzation the issue we came to know that there is no relationship with org. assignment. We went to TC: PO13>give position>select relationship-->click on create infotype. Here we have given relationship A 011and click on save and again save. Now, we went to TC: PA20/30 cost center is appearing correctly.
    We have couple of pers nos. Instead of doing manuallthis we are doing executing program RHINTE30 in TC: SE38. But it is not updating cost center in TC: PA20/30. How should i achieve this issue? Pls advice....

    you are correct RHINTE30 report will update Cost Center in IT 0001 from OM. Before that you have to upload CC to position through T.code  P013 using either LSMW / BDC.
    For updating CC in IT 0001 process is below.
    First Create Cost center to position using P013 t.code and relation ship A 011.
    Excutre report RHINTE30 using T.code SE38.
    After that there will be one batch input session created in SM35.
    Finally Select your batch input session and Excute through SM35
    Then CC will be updated in IT 0001.
    If there are no much employees you can manull create CC directly in P013 and CC will directly upte in IT 0001.

  • Cost center belongs to company code 1000, not 2000

    Hi,
       When i am entering cost center in sales order, I am getting  an error "Cost center belongs to company code 1000, not 2000"
    Does anyone know which transaction i can use to extend this cost center to a different company code?

    I think you are creating sales rder for plant 1000. While the cost center you are providing is attched to plant 2000. Either you can change the cost center for plant 1000 or you can change the customiztion so that cost center is attached to plant 1000.

  • OUTWPCOSTC - Query Cost Center

    I want to write a PCR which will throw an error in payroll driver log if cost center is not maintained in Infotype 0001.
    I understand we have to use the OUTWPCOSTC, VALEN and VAOFF. I am however unsure how to use VALEN and VAOFF and write Error Statement. Anyone written OUTWPCOSTC pcr before?
       OUTWPCOSTC
            Error "Cost Center not maintained in Infotype 0001`"
          A
            ok

    Hi,
    Here it goes.
    VAOFF 6 (offset cost center to read from 6th position to end, optional and can be skipped)
    VALEN 1 (set length to 1 and this needs to checked for cost center entered as exist or not)
    OUTWPCOSTC
    ERROR
    In schema maintain rule as,
    ACTIO <rule> A
    Where, ACTIO is function to perform action,
    <rule> is rule to be actioned
    A is rule will perform action for each work center (read documentation for ACTIO)
    Thanks,
    Ameet

  • Error in creation of Cost center

    Hi All,
    Trying to create Cost Center through KS01, however I am getting an error as "No compnay Code assignemt to the Contrilling area TS". can anyone please explaine me on the process to chek this error.
    Bharath

    HI Bharath,
    Please check the spro seeting for this error.
    spro -> enterprise structure - > Assignemtn - >controlling - > Assign Company Code to Controlling Area.
    Please check whether the required Company code has been assigned to the Controlling Area. If not please assign the required and check or the same.
    Please note: A company code can be assigned to one controlling are only
    Regards,
    Madhu Sudhanan

  • KO88 - Error when settling for Cost Center AND Auc for the same Internal Or

    Hi Experts,
    We need to configure Investment Internal Orders that could settle to both Cost Center and Auc, but each assignments with different Source Cost Elements
    We did the following:
    1. Created Auc Class
    2. Created Investment Profile "IMOBIL" and assigned to Auc Class, flagging Auc
    3. Created Allocation Structure "CV" with two assignments:
    01, Source = Cost elements 7000000000 to 7999999999, receiver AUC "by cost element"
    02 Source = Cost elements 4000000000 to 4999999999, receiver CTR "by cost element"
    4. Created Model Order, filling the Investment Profile IMOBIL created in step 2.
    5 Created Settlement Profile ZCV0001, assigning Allocation Strucutre CV, allowing CTR and AUC for receivers, default receiver is "FXA", doc type "AA".
    6 Created ORder Type CV01, assigning Settlement Profile ZCV0001.
    When I post only for Asset Expenses (Source Cost element 7, Assigment 01), the settlement through KO88 correctly settles to AUC, and also creates the settlement rule for cost center (i'm using the strategy to create from Responsible Cost Center).
    But when I post for Asset Expenses (cost elements 7, receiver AUC) AND General Expenses (Source Cost element 4, receiver CTR), KO88 generates an error KD506, saying that for Assigment 02 - AUC I didnt define a settlement cost element.
    1. Assignment 02 is not AUC, is CTR;
    2. I flagged "by cost element", so I don't need a settlement cost element. And also, I was able to post to AUC when the source posting was only for cost element 7.
    Did you face any problem like this?
    I cannot find out what is the missing configuration, or if it is a program error...
    Kind Regards
    Mayumi Blak

    Hi Ajay
    I already created Source Structure and assigned to my Setllement profile (so I assigned Allocation Structure AND Source Structure).
    I don't understand when you say that I need to assign the Source Sutrcture in each rule....because the Source structure is in the Settlement Parameters valid for both rules...
    When I post to Asset Expenses only for the internal Order, the 2 rules (CTR and AUC) are created when I run KO88 (but only AUC rule is settled). This is OK.
    The problem is when I post for both General Expenses AND Asset Expenses, the system is not recognizing that I have 2 source structures, neither is findind that for CTR AND AUC the Settlement cost elements are the original cost elements.
    I'm thinking about changing message KD506 to warning, do you know if this can help?
    Kind Regards
    Mayumi Blak

  • Cost center Error in SRM

    Hi,
    We are working on SRM 4.0. when the user is trying to create a shopping cart from catalog he gets the error message as
    "you don't have the acces to the cost object xyz12.please return to the cost assignment section and correct".
    We have given the access to that cost center in SRM even also he is getting the same error. 
    He does not have any problem with single line item against the same cost center. problem gets only when he is going to create with multiple line items in shopping cart against the same cost center.
    Request you to please advise me where i need to check to overcome the issue.
    Regards,
    Sri

    Hi  Sri,
    Is this the exact error you are receiving, it does not seem familiar? Is this a customer message in yor system?
    Regards,
    Jason

  • Cost Center Error while releasing Billing document to Accounting

    Hi SAP Gurus,
    Our user raised an issue that when he had released billing document to accounting, the system threw error message
    "Cost center xxxx (CO area)/xxxx(Cost center) does not exist on date 11/16/2011". Message No. KI 222.
    But the cost center xxxx does not exist in the system at all. The user does not want to create the cost center eirther. Cost center was not entered in Sales order, Delivery and Billing. I have checked 'Default account assignement' (OKB9) settings, Default account assignment in cost element master record and assignment of cost center to sales organization (OVF3). But cost center xxxx was not configured in the above settings. I have checked validations/substitutions, user exits and BAPIs, there is nothing specific to the cost center. This is not a cross-company code scenario. I have made field status to optional for cost center. But still the problem persists. Accounting document did not get generated because of the above mentioned error message. User applied SAP notes 315350. But it did not resolve the issue.
    Would anyone let me know 'why the system showed the cost center xxxx that does not exist, while releasing the billing document to accounting'?
    Thanks in advance.
    Best Regards,
    K.S.K

    Hi Friend,
    I think this link help for you
    Cost center XXXX does not exist on 15.09.2010.
    or check the OVF3

  • Problem while creating PO (Cost center error)

    Dear Expert,
    While Raising PO through ME21N, we are getting an error for cost center budget exceeded for 2011.
    The below is the error.
    Budget for Cost Center 2110404 getting exceeded for year 2011. Please check
    Message no. ZCO_VALIDATIONS004
    The cost center is newly created in the fiscal year 2011 & the budget is assigned at internal order level & not on cost center level.
    I want to know were the system is checking for the budget in cost center (T code).
    I have checked the Tcode KPZ2, KPZ3, KP06, there is no budget assigned.
    Thanks & Regards,
    FICO Consultant

    Hi,
    I have checked the Co Validation in Tcode OKC7 & found the below validation set for specific  Cost center i.e Marketing cost center which i m using.
    Cost Center IN
    FIVAL_MARKETINGCC ( Marketing cost centers for Validations ) AND NOT
    Activity type LIKE 'HR' AND NOT Activity type LIKE 'TR'
    AND NOT Activity type LIKE 'AZ' AND NOT*
    Ref. Transactn LIKE 'TR' AND NOT*
    Ref. Transactn LIKE 'HR' AND NOT Ref. Transactn LIKE 'A'
    AND Amount in LC <> '0.00'
    Please let me know if you can give any inputs on the same to resolve my issue.
    Thanks & Regards,
    Dhaval

  • Cost Center Error Message in Posting a Billing Document to Accounting

    Hi Experts,
    I am in process of testing my form enhancement for Billing Documents especially Debit Note and Credit Notes. However, when I post my Billing Documents in VF02, this status message appears:
    "Field Cost Ctr is a required field for G/L account 2100 855020".
    Now I already checked the configuration in FS00, VKOA and we want the cost center field filled-up in the process but automatically. Do I missed some of my configuration to maintain also the Cost Center? What transaction code should I check and maintain the Cost Center for this scenario.
    Thanks a lot for your answers.

    Here is the Entire Error Message:
    Field Cost Ctr is a required field for G/L account 2100 855020
    Message no. F5808
    Diagnosis
    The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "855020" in company code "2100" linked to the field selection for posting key "50".
    System Response
    Error
    Procedure
    It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Maybe you are looking for