Error during Cancelation Credit memo document in trasaction MR8M

Hi experts,
I have a problem in the transaction MR8M during cancelation credit memo document. The error message no. F5808 occured: The value for field "Part. Bank" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "160000" in company code "XXXX" linked to the field selection for posting key "31".
I checked the field status group for the G/L account 160000, but there is no mandatory field for "Part. Bank". In the posting key 31 is mandatory field "Part. Bank", but problem is, that for the posting key 21 - Credit memo should system use the Reversal posting key 32, which is adjusted in the transaction OB41. I don´t know why the system want to use posting key 31 by reversing credit memo intead of posting key 32, which is in customizing.
Moreover, I tried to post simple document in FI module with posting key 21 and by reversing this document system used the correct posting key 32, where the field "Part. Bank" is suppress field.
Do you have any ideas?
Thanks a lot
Miroslav

we just had the same error message F5808 giving the same wrong posting key 31 for credit note cancellation instead of 32.
We solved the issue like this:
-access the follow-on document in accounting by FB02
-complete the field which is said to be mandatory as per the error message
The change in the FI document is of course not transferred back to the original LIV document but after having "completed" the follow-on document we were able to cancel the LIV document with MR8M without the error message we had before.
I'll keep Pablos breakpoint (thanks!) in mind if this happens again with a field that cannot be accessed in FB02.
Regards
Mark

Similar Messages

ERROR MESSAGE M8 534 during MR8M, Cancel CREDIT MEMO PROCESSING

Dear Experts,
Kindly explain me what is the actual meaning for the message "Balance not Zero: 4,487.00 - debits : 54,487.00 Credits : 50,000.00"
The above message has been received during cancel Credit memo document through MR8M.
Kindly help me out to proceed further..Thanks in advance..
Regards,
Kumar

Hello Kumar,
This problem usually occurs due to differences in tax amount
The source document was posted in a previous period.After this, the tax rate was changed (this is allowed in countries with tax jurisdiction code).The reversal document should be posted in the current period.When canceling the source document, the tax is calculated on account of the entered posting date and differs from the original tax amount.
If the posting period of the source document is opened:
-   Post the reversal document with posting date of the source document.
If the posting period of the source document is closed:
- Open this posting period and post the reversal document with the posting date of the source document. If you do no   longer   want to open the previous period, you can only post   a credit memo in this case.However, a different tax amount is calculated here if, as described above, the tax rates have been changed in the meantime.
Hope this can help
Regards,
Mauro

Cancel credit memo genarating wrong accounting document

Hello,
We are facing when we Cancel sales credit memo credit memo genarating wrong accounting document entry in production system.
I have checked the billing type for credit memo s1 and cancel credit memo in production system configuration
Cancel credit memo is hitting document type RV instead of AB in production system
I have checked the oba7,vofa.
Please provide the clarification.

Hi,
In Billing type defination, VOFA, if the document type is left blank, then system by default picks up RV.
Please check your billing document type and check if document type is left blank, this could be a reason why system picks up RV instead of AB.
If you want system to pick up AB then in Cancellation billing type document, enter document type as AB, this should work.
Regards,
Malini

Cancel Credit Memo Not passed to Accounting

Hi, All
My client have a Issue there raised Credit memo request with reference to billing document later there convert into Credit Memo, later there found amount there given is wrong credit memo request, there cancel credit memo the problem is that system not generate any accounting document Due to the Number range Issue and we fix the issue ( Same Series of number ranges RV and accounting ) previous it was the other Series of number ranges
The problem is Cancellation of credit memo not passed to accounting and credit memo already passed to accounting
Can we delete Billing document not passed to Accounting So i can again Cancel the Credit memo
it very urgentt
Thanks
Rajesh

Hi,
to cance a cancellation document, check note 388489.
But the status of the original document won't change thus you cannot cancel it again. The solution is creating a debit memo.
Balazs

Error during Cancel of Goods Issue 202

Dear All
i hv face an error during cancel of goods issue --> Areason has to be entered for mvmt type 202 " here in MIGO --> at detail data in where tab the field is missing simply say that user is not able to fine the block where to enter the reason then , pl help what to do ?
sap2008
Edited by: sap2008 on Jan 8, 2009 6:37 AM

Hi,
If you have material document number created for movement type 210, you can simple use the transaction code MBST to cancel.
If you don't have material document number and you are trying to post the material document for movement type 202.I will suggest you to use transaction code MIGO
In MIGO select Goods Issue and in next field select Others and in Movement type select 202.
Now you can cancel of goods issue.
Regards,
Manish

Cancel credit memo request

Hi,
Please note that we have the following document:
5509991721, that is a Cancel credit memo request. This document was not released for accounting from August 2009, but now is released and we don´t have any other document to clear it. The claim was paid to the customer on August 2009 as well. So, we need to cancel this document or clear it in order to have the correct account statement for the customer.

Hi,
For your problem description it seems that the relevant document for credit memo is already cleared. In this case you have to reverse the wrongly cleared document. If it is not possible due to period close or any other issue,then create one rectification entry for wrongly cleared document & clear credit memo against it.
Regards

Error in creating Credit Memo

Hi,
AI is returning the below error for a credit memo
The document created must have a non-positive total amount because the creation sign for your transaction type is Negative.
The amount on the line is already having a negative value.
Can you please advise what could be the issue?
Regds,
Jaya

Hi Octavio,
There is only 1 line for this CM with line type ='LINE'
We just saw that previous_customer_trx_id was null for this null. On populating this value manually, the credit memo was generated.
Not sure why this value was null initially.
Regds,
Jaya

VF11 - cancel credit memo

Hello sap gurus,
I have a problem with cancel credit memo in transaction VF11. In the log I can see an error message " Delivery does not exist" Can I delete this credit memo in other transaction or what I have to do for cancel this credit memo?
Thanks a lot

Hi,
Can you please tell
1.Are you receiving any material from customer side? if yes
Have you done the PGR?
what are the Transactions you have done ?
2. Are maintaining the new price ?
That is the case i think you don't required PGR directly you can raise the Credit note
In this check the copy control VTFA
Regards,
Prasanna
Edited by: prasanna_sap on Jul 13, 2011 5:02 PM

Pricing error while making Credit Memo

Dear Gurus,
While making credit memo with reference to credit Memo request i am getting pricing error on the basic price.
Please note i am getting this error only while making credit memo under this conditions
1. while using Invoice as reference while making credit memo request and than making credit memo with reference to credit memo request.
Please note i am not getting this error while the credit memo request is not refrenced to Invoice.
I am using the same document types for both the scenarios. I have checked copy control and the Pricing type maintained is "D".
Please let me know what could be the possible error.
Thanks for your help in advance.
Regards
Shrads

Hi,
Please check your credit memo document type for document pricing procedure in VOV8.

Two errors during cancellation of AR Credit Memo with 'Free of Charge' option

Dear all,
I've created a AR Credit Memo - with Free Of Charge option established.
After I've tried to cancel this document. SAP shows the following error messages:
- No matching records found '' (SWEI) (ODBC -2028) [Message 131-183]
- No matching records found (JDT1) (ODBC - 2028)
Please note that if a take out option 'Free Of Charge' from AR Credit Memo I'm able to cancel the document.
Thank you in advance.
Kind Regards,
Mariana
--> Customer using SAP BO 9.1 PL 05.

Cancelling Credit memo not reverse the accounting document

Hello,
Hello,
We are facing pecular problem in production system when we Cancel the sales credit memo system is not genarating the reversal accounting document and it's genarating the entry same way credit memo.
When we do the credit memo it's passing accounting entry in the following way.
Posting key 11 with customer (credit entry)
Posting key 40 with revenue (debit entry)
Posting key 40 with tax (debit entry)
When we cancel the credit memo system is not passing the reversal entry and once again it's passing the same entry.
Posting key 11 with customer (credit entry)
Posting key 40 with revenue (debit entry)
Posting key 40 with tax (debit entry)
Could you some body explain me what is the problem
Regards,
Satya
Regards,
Satya

Dear senthil
As I said earlier, once the accounting document is generated, the respective amounts will flow in debit / credit entry of the document flow.
Once you cancel the billing document, for this cancelled billing, one more accounting document will be generated and with this, the above entries would be vice versa. That is debit entries get credited and credit entries get debited and you cannot hide this from SAP
thanks
G. Lakshmipathi

DTW Error A/R Credit Memos

Hello guys!
I got a problem while trying to upload A/R Credit Memos through Data Transfer Workbench. It shows an error message inthe DTW Error Log: "Cannot add invoice with zero total and deferred tax http://ORIN.DocTotalApplication-Defined or Object-Defined erroroCreditNotes".
I am using the Document, Document_Lines and Batches files to upload and there is no record with zero in the lines nor the total
I tried unselecting the deferred tax checkbox for all Business Partners and still doesnt work.
Got any ideas what can it be or how can I solve the Problem?? I´d appreciate your help tremendously!!!

Hi,
Try to omit DocTotal on the header file. That is a calculated field. What is your B1 version and PL?
Thanks,
Gordon

Error when releasing credit memo to accounting

Hi,
When I try to release the credit memo to accounting the system throws the following error "Account type/account for invoice reference does not match item".
Anyone know the reason please?
Thanks,
Shankar

Dear Shankar,
This error occurs the following reasons.
1. Revenue account determination has not been properly set.
2.check in VOFA where under General control, document type is there, you need to mentioned RZ(Billing doc.transfer) and also check accoun determination procedure in billing documnet as well as credit memo.
3. copying control.
Plz check and revert.
Regards,
Narasimha

Error in posting credit memo

Hey,
I posted a credit memo in transaction FB65 but made a mistake by not indicating a check mark in 'calculate tax' box.
I checked transaction FB02 to correct this but there is no option other than reversing the posting.
What is the best way to correct this?
Could someone give the steps involved to correct this mistake?
Thanks

Hello,
You must first reverse the document in error and then capture the document correctly.
In SAP system, this is done to provide an audit of the correction.
Hope this clarifies your doubt.
Thank you

Cancel credit memo created via MR8M

Hi,
My user cancelled an invoice via MR8M & it created a credit memo.
Now, they would like to reset the credit memo.
Please advice.

HI ,
You can pst again Invoice with MIRO on PO as PO is now opened . Now cann't reset the Credit as MR8M is reversal of MM document .
Many Thanks

Error during Cancelation Credit memo document in trasaction MR8M

Similar Messages

Maybe you are looking for