Error during Goods Issue Posting to Cost Center

Hi all,
I have WM and HUM active.
I'm trying to post a GI to Cost Center using the transaction MIGO and Movement type 201. I get this error during the transaction:
Data for creating a delivery is incomplete (Vendor)
Message no. M7279
Diagnosis
The system found that the data required to create a delivery via Shipping is not complete.
System Response
The system cannot create a delivery.
Procedure
Check that the data for Vendor is maintained in your system:
loading group
debtor number
sales organization
distribution channel
division
shipping condition
shipping point
It's strange that the error is specific to vendor because this is an inhouse transfer to a cost center. However, I've maintain the listed items in spro.
There's still something wrong and I'm at a loss. What am I doing wrong? How can I correct it?
Any suggestions would be appreciated. Thank you.

Hello Uzoamaka
Not sure if this helps you but check out these OSS notes, first one especially, and others referred within them.
Let me know if they help you or otherwise.
547209 - Backflush of HU storage location generates delivery
723250 - M7279 when creating a delivery from MB1C

Similar Messages

Error during goods issue-Posting period not open

Hi ,
I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
Thanks,
Hari.

Hi,
Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

MIGO - Goods issue to determine cost center based on storage location

Hi Experts,
Any idea how to determine the cost center based on the storage location instead of from tcode - OKB9 when creating Good Issue via MIGO_GI?
Points will be awarded for useful solutions. Thanks.

Hey Janet,
A Cost center cannot be determined from an SLOC..it si always at the company code and valuation aea level

Error during Goods Issue "Update was terminated"

Hi,
While doing Goods Issue (Mov Type 201), the system save the Document, but when we display the Document, the System gives the following message:
Update was terminated
System ID....   DEV
Client.......   400
User.....   MMUSER1
Transaction..   MIGO
Update key...   B4E937DFC88FF1F3998B00215E73E462
Generated....   25.03.2010, 14:09:53
Completed....   25.03.2010, 14:09:53
Error Info...   F1 109: Line item 001
Please note that using MMPI, we have opened the back period. There is not problem in posting the Goods Receipt/ Goods Transfer/ Invoice Posting.
Please help.
Regards,

an update termination happens only in an unexpected case, no authority is an expected case and SAP would issue a status message long before posting.
In your case SAP determined a document number (item number) that is already in the data base. hence it can technically not store the document.
such things happen if one transports a number range from a development system, but in dev systems the current number is much lower than in a production system, so the next number that is taken from the number range is already used and stored in a table.
or if one resets number ranges after an archiving run or for any other intention.

Error during goods issue

Hi Gurus,
While doing goods issue of operatings supplies material type we are getting an as follows
Create account 403000 for 18.04.2008 as a cost element in controlling area
Although G/L account and cost element are already created
Message no is KI280
Thanks in Advance
Regards
Ramkumar Wariyar

Check the validity of the cost element and gl account. You may need to extend the validity of the cost element.
Regards
Ram

How to limit material goods issue to 1 cost center

Hello SAP Friends,
We have some materials that should always be issued to the same cost center. Sometimes our warehouse people forget and enter the wrong cost center in transaction MB1A. How can we restrict cost center in this case?
Thanks!
Den

Hi Dennis,
You can code your own validation in the following userexit :
-EXIT_SAPLMBMB_001 ( but you will need to trigger an E message / A message ) as this is in the MB_POST_DOCUMENT ( pro is that its on the logistics side but contra is that its already in the update task not so nice )
-There seems to be a BADI ( see SE18 / MB_DOCUMENT_BADI ) available that does what you need : MB_DOCUMENT_BEFORE_UPDATE
-Another option more standard SAP is to add FI / CO validation for this ( via validations/substitutions ). I'm not an expert there however but we do similar things in there. Do you have an FI/CO expert available ?
In all cases you should check that for those special materials the right cost center is used
rgds
Dirk

Error during Goods Issue using movement type U61

Dear All,
There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
Any guidance or help is welcome
Regards
Balaji.J

Hi,
The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
Regards
Balaji.J

Error during Goods receipt posting

Hi all
I'm getting the following error message when trying to do a goods receipt (101 mvmt)...
Account determination for entry COA BSX ____ ___ 7900 not possible
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key COA BSX ____ ___ 7900 is not maintained in MM Customizing (Valuation).
The key is made up of:
Chart of account
Transaction key (= Posting transaction)
Valuation grouping code
Account grouping code
Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
But I've created a GL account and assigned to the val class.

Hi ,
U try to post material from MB1C and to solve the above error u have to do the following changes:
OMS2-> choose your material from position button-> Select it> Click on Quantity/Value Updation under dialog structure> Choose your Value Area and Material Type> Uncheck Value Updation---> Save it and now try to post material .
Did u tried this this will help u
Still if u find error reply me
Reward me points if helpful.
Regards,
Venuprasad

How to Default Cost Center During Goods Issue (tcode: MB1A) To Prod Order

Dear Experts,
How to default the Cost Center/ Profit Center during goods movement posting?
Currently, for Goods Issue transaction, the cost center show blank. Even i have default C.Center in cost element (OKB9)
Where to link Cost center/ Profit Center to MM module?
Need your help.
Thanks,
Kiran D

a. If you want to default a cost center to the transaction then use substitution. Give the default profit center in the cost center. so profit center will also get defaulted.
b. if you want to default the GL account then configure it in OBYC, then use OKB9 to give the default cost center and profit center.
anantha

FMDERIVE FM assignments during migo goods issue posting

Hello experts,
We are using funds management (ECC 5.0) . During goods issue to reservation the fund, fund centre, commitment item which are entered in the reservation document are displayed during the fmderive trace. Even while performing check (under MIGO) the display and commitment item derivation is correct. But when posting , the first screen of trace shows all fields correctly.
On clicking X, all the data fund, fund centre commitment are initialised to BLANK. And system gives error "No fund cente derived , entered FI313" even though the migo screen shows all the data intact. Somehow MIGo when posting initilaises all the fields
Please help
HKrishnan
Indian Rayon

Hi all,
thanks for the helpful suggestions. I have found that while doing the actual posting for
goods issue , fmderive was trying to derive commitment item, and since nor rule was applicable it was giving the error. it was due to an erroneous rule wherein the inventory posting flag waas missing in the relevant GL, and corresponding credit/debit entry was also missing.
Now corrected. I have still not understood, why the derivation blanks out all the fields which have been already entered by user in the original document.
In other words of the field commitment item is already fileld it should skip the entire FMDERIVE process.
Anyway thanks all

PM Order Confirmation create actual posting in Cost Center, with CE type 43

Dear Expert,
I would like to know the business flow of Plant Maintenance that impacts cost center reporting.
During PM order confirmation, it will create an actual posting in Cost Center from Cost Center Reporting (No FI posting), say CC Operation, with Cost Element type: 43, which is attached with the activity type of Labor Cost assigned the the PM module.
Example: Cost Center: CC Operation, Cost Element: 840001 (CE type: 43), Amount: USD 100- (negative sign)
My Question:
How does this posting (currently is in controlling only) in cost center Operation with Cost Element type: 43 be reflected in my FI reporting?
Let say there is an FI posting of labor cost in CC Operation, amount USD 100, then from Cost Center Reporting, it actually offset both amounts, and this cost center become 0 in amount.
Kindly advise the concept of Plant Maintenance.
This seems like same with the concept of KB21N.
Thanks.

Hi Karthikeyan,
My issue and concern is similar to the issue raised as follows:
Secondary Cost Element Configuration for Plant Maintenance Order
http://scn.sap.com/thread/3488730
In this forum, it says that the posting in CO, during PM order confirmation is ...
+10 for Order and -10 for cost center A
After PM Order settlement:
-10 for Order and +10 for cost center A
From the cost center and PM Order CO report, they are 0 in value ...
Is this the correct way?
Thanks,
-Chin

Statistical posting to cost center

Hi gurus,
My client requirement is while doing goods issue against goods issue that cost should post to cost center as statistical,,, is it possible to do so...Pls help me on this...
Thanks,
Ram

Hi Eli,
Thank you for your promt reply.
Is it possible to make statistical entry to cost center at time of goods issue against producion order.,.. The materils are Bom materials....
Thanks
RAM

Automatic batch determination during goods issue

Hi,
We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction. Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
Thanks & Regards,
N. Laxman

Dear Laxman,
Check these links,
https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
Automatic batch determination
Re: how to make the batch determination process automatic
Regards
Mangalraj.S

Batch determination based on fifo during goods issue

Hi All,
My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
I have activated batch wise split valuation.
I have maintained characterstics with MCH1 table and HSDAT.
Assigned to class and class is assigned to stratergy type.
Created sort sequence and sort rule ascennding.
Assigned this to stratergy type.
Maintained condition record also.
During goods issue to production system is not proposing the batch based on gr date.
System is not stopping me while making goods issue with other batch.
Please guide to fix the above issue.
Regards,
Venkatesh

Split valuation has nothing to do with this problem.
I hope you do not just require the sequence for physical goods issue to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
here you set the box for batch check active, which means if a batch is entered manually then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.

Change Moving Average Price when Post Goods issue posted from VL02N

Hi all,
Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR
when Post Goods Issue posted from transaction VL02N.
Thanks in advance,
Mila.

Hi,
Check these Enhancemnts...
Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
Badi Name            Description
DELIVERY_ADDR_SAP    Determine Time-Dependent Delivery Address in Delivery
DELIVERY_PUBLISH     Returns BAdI Implementation: Automatic GR Posting T 2
DELIVERY_PUBLISH     Updating of Delivery in Purchase Order
DELIVERY_PUBLISH     AIP: Delivery Confirmation for Sales Order
Regards
Raghu

Error during Goods Issue Posting to Cost Center

Similar Messages

Maybe you are looking for