Error in Accounting Doc with 2 taxes

Dear Gurus,
My client
requirement is that they required 3 different taxes on pricing procedures of
Sales Order to Billing Document. One is 
general sales tax i.e 17% (MWST) , other is income tax (ZIN) i.e  10%
and last one is Additional Tax i.e.1% (ZADT) . I have created condition
types ZIN and ZADT by copying MWST with same access sequence. Both Taxes ZIN
and ZADT should utilize automatically (Condition Record)  in sales document instead of any manual
entry.
First I tested the scenario with Condition Type of MWST only and it runs successfully
till creation of accounting document. Later I am testing with condition record
with ZIN but at the time of accounting document following error is coming:
Tax code OG does not appear in any G/L account item
Message no. FF753
I have
searched all the relevant queries on SCN and following steps already done in
customization from my end:
Tax type ZIN is assigned on Tax calculation procedure TAXPK with
Account Key ZIT similarly as on Sales Pricing Procedure
Create Tax Processing ZIT at T Code :OBCN  with Tax Type: Out Put Tax and Posting
Ind.:Separate line indicator
Create Tax Code :OG at Tcode :FTXP
and assign 10 in Tax Perc Rate with Tax Type :Income Tax ,Acct Key:ZIT
and Cond Type:ZIN
Assign Tax Code OG with relevant G/L on Tax Processing :ZIT at Tcode
:OB40
Assign Tax Category in relevant G/L as * (All Tax Types Allowed)
Kindly
guide which steps required rectification for proper execution of this process.
Looking
forward for your cooperation.

dear
the function of the sort key is that the setting done in the sort key will be there in the Assignment field in the accounting docuement.
the sort key is defined at the accoutn level in control tab and also at the customer master level in company code data.
if there is a mismatch between sort key defined at the customer master level and defined in the account level then system flashes this error.
u just remove the sort key from the customer master Company code data then try posting the documetr.
regards

Similar Messages

  • Error while sending PO (with tax code) from SSP to SUS via MM

    Hello Experts
    We are implementing Self Service Procurement and Supplier Self Services scenario.
    We have created a SC with Tax Code say X in Self Service Procurement. The SC gets created as PO in R/3 (MM) system.
    The IDoc which is getting created in the R/3 system has different segments than the one which gets created when we create the PO directly in R/3 system.
    This IDoc which is seen in R/3 with the Status 26 - ' Error during syntax check of IDoc (outbound) '.
    Please help, we are new to SSP.
    Thanx and Regards
    Gaurav
    Edited by: Gaurav Giroti on Jan 29, 2009 1:36 PM
    Edited by: Gaurav Giroti on Jan 29, 2009 1:37 PM

    note 1311560 to be applied in ebp.

  • Error in account assignment with Asset

    Hi Gurus,
    I am trying to create a shopping cart with a valid Asset master but getting an error-
    Transaction type does not exist
    Error in account assignment for item 1 
    I can create a PR with this Asset number in ECC successfully without any error but the same Asset number is giving the above error in shopping cart
    Regards
    Kapil

    HI
    is the problem related only with asset number? or also with other account assignment?
    than try to understand if the following table is correctly defined
    SAP Supplier Relationship Management-SRM Server-Cross-Application Basic Settings-Account Assignment-Define Account Assignment Categories
    than
    SAP Supplier Relationship Management-SRM Server-Cross-Application Basic Settings-Account Assignment-Define G/L Account for Product Category and Account Assignment Category
    regards
    andrea

  • Business area is missing in Accounting doc for Taxes

    Hi Gurus,
                  When I am sseing accounting doc, The business area is not showing for taxes,but its showing only for sales values. Is there any setting for getting Businees area for taxes?.
    Regards
    Rams

    If the Profit Center of material is flowing wrongly in billing or a particular G/L Account is assigned to multiple Business Areas, you will face this type of problem.
    So Check whether your profit center is flowing correctly and also the respective G/L Account is not assigned to multiple Business Areas.
    In order to avoid this, you should have invoice split based on business area.
    thanks
    G. Lakshmipathi

  • Report for payment due billing doc with taxes

    Hi All,
    I want the report for payment due billing documents with following fields and after payment is done( F-28 )  that document should not appear in the report for the said period.
    Billing date, Billing doc no, Net value, Tax Amount
    Thanks and regards,

    Dear Swarup
    You have to table join in SQVI - VBRP  for Billing date, Billing doc no, Net value, Tax Amount and BSEG  for payment updation details.
    Take the help of ABAPer and develop a zee report to fulfill the requirement.
    thanks
    G. Lakshmipathi

  • Reconciliation account setting with tax category

    Hello to you all,
    I need to create/control some reconciliation account for Vendor/customer. Do anybody of you know if the tax category, for this specific Rec. Acc. is a required / suggested field? ( I do not mean at thecnical level but functional level)
    Thank you in advance.
    Claudia71

    Hi Claudia71
    Welcome to SCN Forum
    As per the SAP standard the reconciliation account is required.But it can be changed as per the client work.But it is advised to keep it mandatory
    If you need more clarification it is advised to post the thread in Finance Forum
    NOTE: Kindly search in the forum before posting any thread
    Regards
    Srinath

  • Error in account determination when taxes are applied

    Dear All ,
    we have scenario where the customer does different types of services like house keeping services,mechanical&electrical maintainance services etc.Here service tax,cess and higher education cess have to be applied for all the services.
    I have fullfilled these requirements.
    However my client  want to book each services under different g/l account and the respective taxes like the service tax,cess and higher education cess also in different g/l accounts each of them seperately.How to get this in the system.
    your valuable suggestions are welcomed .iwill remember to reward points for timely help.
    thanking you,
    R.Srinivasan

    Hi,
    Maintain seperate condition types in the pricing procedure and ask FI colleagues to mainatin tax settings(FTXP) for these conditions country specific.
    Assign different account keys in the pricing procedure so that it will be posted in seperate G/L accounts for accounting.
    From FI side if they maintain FTXP settings then no need to do VKOA settings,otherwise we need maintain VKOA settings for tax determination.But ingeneral all the tax condition are for automatic postings through FTXP.
    Reward if it helpful.
    Regards,
    Chandra

  • Error display PDF doc with zoom=75% oder zoom=125%

    Hi,
    I'm using Adobe Acrobar Reader X 10.1.4 (but the problem occurs unter Acrobat Reader 9 too) and have a big problem:
    If using a zoom factor of 100%, all looks fine, the Text is "63+1,5"
    But if I'm using a zoom factor of 125%, the text is wrong: "63-1,5"
    I've got this problem with a lot of pdf files (example)
    Any idea, how to solve this problem?
    Ciao
    Frank

    See http://forums.adobe.com/thread/1408375

  • Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

    Issue:   I am encountering a problem entering Taxes when applying  down payments received from customers since we are using a jurisdiction code taxation procedure.  This process works as desired in Europe for our firm.  I found OSS 97288 which is not valid for version ECC 6.0.  Please assist due to US go-live in 2 weeks.Process:  Create Down Payment Request for cash in advance.  Required to tax at this point.  Billing document creates a noted item in the G/L (Special G/L).  I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
    Settings:  1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross."  2) Transaction OBXB specifies tax clearing account for transaction key MVA.  This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
    Thank you in advance!

    Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

  • Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

    Hi Guys,
    I am facing very critical issue on down Payment request, to process with saperate Tax Value.
    We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
    As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
    Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
    For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
    We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
    We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
    I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
    Below is the error message:
    Down pmnts with taxes are not permitted when processing with jur.code
    Message no. FS206

    HI Preeti,
    Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
    However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
    Did any one seen this case in your experiece, if yes, what is the work-around solution?.
    Need your help guys!,...
    Regards,
    Damodar Naidu

  • Releasing Accounting Doc Issue

    Hi,
    According to My Client Requirements , They will raise the Billing Documents (VF01) but system wont Generate the Accounting Document they want to release the Accounting Doc with authorization
    But if i raIse the billing documnet system automatically generate the accounting doc so i want to control that
    and i want to give the authorization to another perosn to release the account
    I have seen the option to release the account by using the T-Code VFX3
    How to MAP into SAP for that requirement to stop the release account in VF01
    Can any one guide me the solution

    Hi,
    First put posting block in ur billing type. T code is VOFA.
    For Autorisation Check Object F_BKPF_BUK and F_BKPF_KOA. Check the field named ACTVT in both object.
    Do not Allow ACTVT "10" and "43" for object F_BKPF_BUK  and ACTVT " 43" for object F_BKPF_KOA to all users other then ur specific user who need an authorisation for releasing to accounting.
    Hope this will resolve ur problem.
    rgds
    Dhiraj

  • Error in PO Creation with Excise Tax Code

    Dear
    I am getting the following error while creating a PO (in sandbox) in MM.
    No posting rules exist for account key
    Message no. FF714
    Diagnosis
    No posting rules have been defined for the account key in the tax table in table T007B.
    Procedure
    Change the tax table, enter an account key already defined for the transaction in question or define the posting rules for a new account key in table T007B.
    In sand box, I am making use of VS1(Condition Type JMOP)(10%), VS2(Condition Type JAOP)(2%), VS3(Condition Type JSOP)(1%) & JP5 Condition Type JVRD)(4%)Account keys with deductible nature in one tax code V8.   In OB40 GLs are defined.  Posting keys 40 & 50 are given.  In GL master all tax types allowed * is also given.  Also excise data is maintained in the vendor master.
    I am not getting the above error if I make use of any other tax code with only one percentage and one condition type.  I am getting the above error if make use of the above tax code V8 which is created for excise.
    Inputs are hightly solicited.
    Regds

    Check this thread
    [No posting rules exist for account key|No posting rules exist for account key]
    Alternatively, check the following notes which may help you
    =>  Note 27350 - Missing account key
    =>  Note 32828 - Termination with FF714 when posting with FB01
    thanks
    G. Lakshmipathi

  • Error Posting with Tax Code

    Hi Experts,
    I have configured Travel Management for Canada with Tax Codes for Expense Type. Now, when i am trying to post to accounting using Tcode PRRW i am getting this error:
    E RW609 Error in document: TRAVL 0000000011 ECDCLNT100
    E RW619 Combination of transaction key NVP and tax code  is wrong
    Have we missed anything, please provide your inputs.
    Regards,
    KOutilya A.K

    Hi,
    Just Check these notes whether is it useful.
    Note -- 1109348, 979102, 884311.
    Hope this helps.
    Regards,
    S.Srikanth

  • G/L account item without tax code in document with deferred taxes

    Hi ,
    While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
    Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
    Please guide what could be the problem in the Discount Condition?
    Thanks and Best Regards

    whats this Z condition type. Is it  a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
    Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check  whats the GL Account assigned to this Account key (VKOA).
    Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
    Hope this helps
    Regards
    Sai

  • Accounting doc entries not matching with the the entries from j_1ipart2 entries

    Hi,
    After creating PO, I have done MIGO and J1IEX. Now, posted MIRO. The end screen shows a number stating accounting document created.
    I checked the accounting doc in fb03 and the document is displayed over there. I also checked the table for values captured in PART2 of excise. The value displayed in table is not matching with the value displayed in accounting document. Can anyone help?

    Hello Tejas,
    Here is the updated version of the situation.
    After the transaction J1IEX, I got a message saying an 'Accounting Document' has been created. But the accounting document number does not match with the original values. I checked all the tables and found out that the accounting document is not created.
    In this case, I thought of creating an accounting document manually and adding them directly to the table.
    Here are my questions,
    -Can I manually create an accounting document for multiple line items?
    -Few tax values should be split and should go to 2 different GL accounts. so how to do this if I am creating it manually
    -Or can I delete the values captured during 'J1IEX' in the table and reopen the GR so that the t-code j1iex can be processed again?

Maybe you are looking for

  • Getting a cd book onto itunes from flash drive...

    I am having trouble with my cd drive so I used a friend's computer to put a book on cd onto a flash drive.  iTunes will not recognize it.  How can I get the book into my iTunes?

  • Active Directory scripting help

    I am trying to clean up our group policies so I am in need of help creating a script that will list all group policies in our domain, list all the settings that are set in each GPO, and the security filtering for each gpo and also list any settings t

  • How to get started Organizing photos with tags and albums

    Apporximately 15,000 Mostly family, vacations, travel, etc over 30 years What is the BEST way to get started?  Should I tag them first or put them in albums and sub-albums and then try to tag and further identify them?  I know nothing of how is best

  • ABAP Dump when using Shift Related Confirmations in CO11N

    Dear SAP Gurus, We have activated business function LOG_PP_SRN_CONF for doing shift related confirmations using T Code CO11N. On entering the production order and operation number in CO11N, the system proposes the actual data. Then we select the shif

  • Sales area is different in sales order

    Hi When i try to create a sales order in sales area say 1000/12/05, and enter the material say X which contain the division 10 in MM01. The system is showing the messege "ship to party ABC not defined for sales area 1000/12/10. but when in the initia