ERROR in NI VI -- "niSwitch Initialize With Options.vi"

Apparently there is an error in the niSwitch Initialize With Options.vi supplied with my PXI 2503 switch board. I know there are new version of niSwitch, but I am using an older one with file dates of 6/29/2000. The bug is that the "IVI New Session" sub vi input terminal "resource name" is incorrectly wired to the call library node "option string" output terminal. The correct source for the "resource name" input is the "resource name" output terminl of the call library function. If you make this change the VI seems to work. Can anyone else with the old NI switch software verify this issue?

Good morning brent2004,
Thanks for contacting National Instruments with your issue, we'll try our best to resolve it for you as quickly and efficiently as possible.
I have searched in our Corrective Action Database, and have verified that NI-Switch 2.0 did have an issue with the niSwitch Initialize With Options.vi and the logical resource name. This is an extremely old driver that you're working with, and since the upgrade is free, I highly recommend it for your project.
Sincerely,
Minh Tran
Applications Engineering
National Instruments

Similar Messages

Error -1074135038 occurred at IviScope Initialize With Options.vi

Hello,
I'm new to LabView and to IVI drivers, and I'm having problem connecting to a LeCroy LT344 oscilloscope.
I have LabView 12.0, MAX 5.3 and the lctlxxxx IVI driver installed. I already configured the driver, and I can use the VISA test panel to communicate with the scope. However, when I try to run the IviScope - Acq Wfm Edge Triggered.vi example (after choosing the IVI Logical name), it gets stucked in the IviScope Initialize.vi block, and generates the following error:
Error -1074135038 occurred at IviScope Initialize With Options.vi
Possible reason(s):
Primary Error: (Hex 0xBFFA0002) File could not be opened.
Complete call chain:
IviScope Initialize With Options.vi
IviScope Initialize.vi
IviScope [CA] - Cont Acq Wfm Edge Triggered.vi
I really appreciate any help on the matter.
Thank you,
Vinícius

Hi,
I think is a double Post?
http://forums.ni.com/t5/LabVIEW/Error-at-IviScope-Initialize-using-lctlxxxx-driver/m-p/2123946
Are you trying to use the NI-Scope to control your Hardware?
IviScope vs. niScope Hierarchy
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/IviScope-vs-niScope-Hierarchy/td-p/1830727
Ni-Scope:NI-SCOPE 3.9.4 - Windows Server 2008 R2 64-bit/Server 2003 R2 32-bit/7/Vista/XP 32-bit
http://joule.ni.com/nidu/cds/view/p/id/3195/lang/en
Which IVI Class did you install or your hardware use?
I found something about IVI 1.4 Class. I'm not sure if it helps
http://www.ivifoundation.org/downloads/Class%20Specifications/IVI-4.1_Scope_2011-02-14.pdf
Best Regards.
Kais Mekacher
AE Germany-Munich
Kais Mekacher
Applications Engineer
Germany - Munich

"agesani Initialize With Options" timeout error on HP E4401B spectrum analyzer

System: Windows XP Pro, LabVIEW 7.1, IVI Compliance Package 3.0, NI-VISA 4.1
I have an HP E4401B Spectrum Analyzer. I'm trying to write some LabVIEW code for it, using the agesani.llb library.
When I try using the agesani Initialize With Options VI, I get the following error:
Error code: BFFF0015
Source: agesani Initialize WIth Options.vi<ERR>Driver Status: (Hex 0xBFFF0015) Primary Error: (Hex 0xBFFF0015) Timeout expired before operation completed.
I've searched the NI Knowlege Base, and haven't found anything that seems useful. What I _have_ found are the following items.
Knowlege Base article "Time-Out Error with the Agesa Instrument Driver Example". This refers to the agesa drivers, not the agesani drivers. It also references an E4440A spectrum analyzer, not an E4401B. The article says one cause could be that a compatibility mode other that SCPI is in use. While the articles says how to fix this on an E4440A, the fix does not appear to apply to the E4401B. In fact, if it is even _possible_ to have a mode other than SCPI on an E4401B, I can't figure out how to do it. A second possibility the article suggests is that the spectrum analyzer is in Phase Noise mode rather than Spectrum Analyzer mode. My E4401B is in SA (spectrum analyzer) mode. I don't even see a way to put it in any other mode - I don't think the required options are installed. Finally, my VI is configured as the article states - ID Query YES, Reset Device YES, etc. I should note that the instrument's GPIB address is 18, and that this matches the resource name GPIO0::18::INSTR.
Some additional information: The spectrum analyzer's screen is indicating the instrument is in Remote (R) mode as a Talker (T). A "Query UNTERMINATED" error message appears at the bottom of the instrument screen.
I've attached the results of a NI Spy capture to this message. (At least, I think I have. I've never tried doing this before, so if it doesn't show up, would some kind soul tell me how to include an attachment to my post?)
Oh, yes. The agesani version is driver version 1.1, updated 17 Aug 2007. (The version that's currently on the NI download site.)
Attachments:
Capture4.spy ‏9 KB

Hi MXI Master,
If there's an instrument timeout, I haven't been able to find it yet. Seems like there should be, so maybe I just haven't looked in the right place yet. As for the timeout value on the computer, I'm not sure what you mean by this - could you elaborate, and maybe tell me where to find it?
As far as SCPI mode, if it's possible to put the E4401B in something _other_ than SCPI mode, I haven't figured out how. I can't find any support in the programming manual for anything other than SCPI.
That kind of seques into my next couple points. The NI Spy output indicates that one of the commands that is being sent is "*SRE 32".
The "User's & Programmer's Reference" for the E4401B says (on page 206) "Send the *SRE <number> command (where <number> is the sum of the decimal values of the bits you want to enable plus the decimal value of bit 6). [Bit 6 is the Request Service (RQS) Summary Bit. BP] For example, assume that you want to enable bit 7 so that whenever the operation status summary bit is set to 1, it will trigger a service request. Send the *SRE 192 (128 + 64) command."
This statement would seem to imply that the "*SRE 32" command that is being sent by the agesani "Initialize With Options" command is an illegal command, or at best an ineffective command. In light of that, it is interesting to me that the NI Spy output indicates that the next line , viQuery(GPIB::18::INSTR (0x246E9C8), "%s?","%ld"), is generating an 0xBFFF0015 error. In addition, I can find neither the "%s?" nor the "%ld" commands listed in the Programmer's Reference. I wonder if these could be for a firmware revision later than mine (A.01.03), or for instrument options I don't have (A4H, A4J). Alternatively, I wonder if these are simply mistakes.
The next line in the NI Spy output, Formatted viWrite(CPIB0::18::INSTR (0x0246E9C89),"INST:NSEL?",11,11), also puzzles me. The Programmer's Reference indicates that this is a supported command, to see what instrument application is currently selected. (e.g. spectrum analyzer, GSM, Bluetooth, EDGE, noise figure, etc.) However, when I try to issue this command to my instrument, by using the Instrument I/O Assistant Express VI, I get an "Undefined header" error on the instrument's front panel. The instrument's error history shows the same "Undefined header" error. Since my instrument only has the basic spectrum analyzer option installed, I wonder if this command is not valid? (Personally, I wouldn't write instrument firmware code this way, but who knows?) Alternatively, I wonder if this command requires a firmware revision more recent than mine. (The Programmer's Reference is silent about this possibility.)
The next line in the NI Spy output, Formatted viRead(GPIB::18::INSTR (0x0246E9C8),"",4000,0), has another 0XBFFF0015 error associated with it.
Does this information shed any more light on the situation?

Tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insufficient location information or the request device or resource is not present in the system

Dear Friends,
I am from Jesus Osorio from Tektronix Mexico. I have seen this error messages during the last instalations and I am wonder how could I solve it?
tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insuff...
I am using DPO4000 series, laptop with SE for Tektronix Edition and a USB cable. What should I do to solve this problem?
Regards,
Jesus Osorio
Jesus V. Osorio Lopez
AE

Dear Jesús,
You should check if you have on your PC or Laptop installed VISA. I recommend you this link to download it:
http://digital.ni.com/softlib.nsf/websearch/b1a7837fffd2826e8625729100689d3c
To have a better oportunity in having your issue solved, please contact us in Mexico at this toll free 01 800 010 0793. As well as if you post your following messages in the Spanish Forum, we will be able to help you faster.
Thanks for using National Instruments Forums.
NorSa
NI Applications Engineer Latin America
NorSa
NI Applications Engineer Latin America
Para Soporte entra aquí

Error -1074126826 occurred at niSwitch Initialize.vi

I'm getting an intermittant error with my switch card:
Error -1074126826 occurred at niSwitch Initialize.vi
Possible reason(s):
Max time exceeded.
Device: SWT1-DUTSwitching
Status Code: -200221
It happens about 25% of the start-ups (fixed with a restart). I can't find the error codes in any documentation - has anyone got any ideas please?
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

G'Day Chad - thanks for your answer: after several weeks of testing I haven't had the error message since I upgraded to 3.3.1! Well done
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Error -1073807343 occurred at niDCPower Initialize With Channels.vi

Hi all,
While initializing NI PXI-4130 power source I got the error "Error -1073807343 occurred at niDCPower Initialize With Channels.vi".
The routine is in a sub VI already working since two years.
No problem accessing the supply with NI-DCPower Soft Front Panel.
I have the problem since Thursday after installing some LabVIEW updates (don't remember which ones, just all the available).
Is this problem known?
Can anybody help me?
BR
ViP

Dear vigna,
I would please you to check the advices in this KB:
http://digital.ni.com/public.nsf/allkb/8130049893D6461E86256F3B00461E1B?OpenDocument
When the Error still occurs please let me know.
Kind Regards,
Oleg Scherling, M.Eng | Applications Engineering | National Instruments | NIG |

ERROR http: 5: Unable to initialize ssl connection with server, aborting co

HI EXPERTS,
one of my database give me below error when i start its dbconsole. and after failure it give me meassge
TZ set to Asia/Karachi
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://test:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ..............................................................
........ failed.
Logs are generated in directory /u01/oracle/product/10.2/cnichol_cpuplt/sysman/log
and in trace file name "emdctl.trc" below error is logged.
ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
ERROR ssl: nzos_Handshake failed, ret=29024
and trace file named "emagent.trc" give below error
2010-10-04 19:12:25 Thread-88238992 ERROR http: 11: Unable to initialize ssl connection with server, aborting connection attempt
2010-10-04 19:12:25 Thread-88238992 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://test:5500/em/upload/: retStatus=-1
2010-10-04 19:12:38 Thread-88238992 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
dbconosle URL is
https://test:5500/em/console/aboutApplication
Operating system is Redhat linux AS 5.3
what is the possible cause of this failure any one can guide me.
thanx in Advance
regards,
Edited by: AMIABU on Oct 4, 2010 7:28 AM

oracle@bcm-laptop:~$ emctl
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
   Oracle Enterprise Manager 10g Database Control commands:
        emctl start | stop dbconsole
        emctl status | secure | setpasswd dbconsole
        emctl config dbconsole -heap_size <size_value> -max_perm_size <size_value>
       emctl status agent
       emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
       emctl getversion
       emctl reload | upload | clearstate | getversion agent
       emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
       emctl config agent <options>
       emctl config agent updateTZ
       emctl config agent getTZ
       emctl resetTZ agent
       emctl config agent credentials [<Target_name>[:<Target_Type>]]
       emctl gensudoprops
       emctl clearsudoprops
Blackout Usage :
       emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
       emctl stop blackout <Blackoutname>
       emctl status blackout [<Target_name>[:<Target_Type>]]....
The following are valid options for blackouts
<Target_name:Target_type> defaults to local node target if not specified.
If -nodeLevel is specified after <Blackoutname>,the blackout will be applied to all targets and any target list that follows will be ignored.
Duration is specified in [days] hh:mm
        emctl getemhome
        emctl ilint
Em Key Commands Usage :
emctl config emkey -emkeyfile <emkey.ora path> [-force] [-sysman_pwd <sysman password>]
emctl config emkey -emkey [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -repos [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -remove_from_repos [-sysman_pwd <sysman password>]
emctl config emkey -copy_to_repos [-sysman_pwd <sysman password>]
emctl status emkey [-sysman_pwd <sysman password>]
Secure DBConsole Usage :
emctl secure dbconsole -sysman_pwd <sysman password> [-passwd_file <abs file loc>]
     [-host <slb hostname>] [-sid <service name>] [-reset] [-secure_port <secure_port>]
     [-root_dc <root_dc>] [-root_country <root_country>] [-root_state <root_state>] [-root_loc <root_loc>]
     [-root_org <root_org>] [-root_unit <root_unit>] [-root_email <root_email>]
     [-wallet <wallet loc>] [-wallet_pwd <wallet pwd>] [-trust_certs_loc <certs loc>]
emctl secure status dbconsole
Register Targettype Usage :
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep host> <rep port> <rep sid> OR
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep connect descriptor>

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

@prompt syntax error with Optional

Hi Everyone,
My first post here, hope you guys can help me out. I have some predeifned conditions on a UDT universe which does not parse but works fine. However, In IDT i am making the same but unable. As I have seen so far with the .UNX universe any predefined conditions which does not parse on IDT does not work on the report as well unlike UNV universe. So here is my issue:
This does not parse on .UNV but works fine on the report:
convert(varchar, Vw_Ln_Umb.rim_no) = @Prompt('Customer No:','A','Limit Details\Customer No.',Mono,Free,Not_Persistent,{'ALL',}) OR 'ALL' =
@variable('Customer No:')
I have corrected the mistake of the 7th parameter which is the default value as follows:
convert(varchar, Vw_Ln_Umb.rim_no) = @Prompt('Customer No:','A','Limit Details\Customer No.',Mono,Free,Not_Persistent,{'ALL'})
OR 'ALL' = @variable('Customer No:')
and i get the following error : Incorrect syntax near the keyword 'OR'.
When I remove the "OR 'ALL' = @variable('Customer No:')"
I get the error: Incorrect syntax near ')'.
So i have to correct the filter condition as
convert(varchar, Vw_Ln_Umb.rim_no) = @Prompt('Customer No:','A','Limit Details\Customer No.',Mono,Free,Not_Persistent)
but this does not allow me to have ALL as the default value which inturn acts as an optional prompt at report level.
Kindly help me either fix this or create pre-defined conditions with optional prompts.
Mahee

Hi mahee,
Apply this filter condition
if you want to select single value in report use "Mono"
Vw_Ln_Umb.rim_no = @Prompt('Customer No:','N','Limit Details\Customer No.',Mono,Free,Not_Persistent)
if you want to select multiple value in report use "Multi"
Vw_Ln_Umb.rim_no IN @Prompt('Customer No:','N','Limit Details\Customer No.',Multi,Free,Not_Persistent)
Remove extra comma in your filter condition.
Regards
Mustafa

Hierarchy on HANA Calculation View with Optional Input Parameters Fails

Hi,
Has anyone succeeded in building a hierarchy on top of a calculation view with optional input parameters, where an input parameter is not filled?
The original requirement came from the wish to create a parent child hierarchy on a calculation view that was copied into the customer space from a HANA Live Financial Statement query view, but I have found the following when creating a simple level hierarchy on a calculation view that consumes one table. The Calculation View has one Input Parameter where the 'mandatory' box is unchecked.
Calculation view reads ECC table FAGLFLEXT
Simple level based hierarchy on fields PRCTR, RACCT and SEGMENT
Input parameter is used as a filter for PRCTR with logic ("EMPTY" = '$$P_PROFITCTR$$' or "PRCTR" = '$$P_PROFITCTR$$')
When I run the view I see the following behaviour in HANA Studio and Analysis for Excel
Before building the hierarchy I could run the view with or without the Input Parameter
After building the hierarchy I can run the view with the Input Parameter filled, but it fails when the Input Parameter is not filled.
Error message is "error: search table error: [2426] missing placeholder; missing value for mandatory parameter P_PROFITCTR"
P_PROFITCTR is not a mandatory parameter, but the selection for the hierarchy view thinks it should be. I don't find any notes around this issue, so I don't think it's version related, however the version I have used for this test is 1.00.70.
It's a shame we can't currently build the hierarchy as the parent child relationship is provided in HANA Live view NewGLFinancialStatementQuery.
Thanks,
Ken

Hi Ken,
We have been facing similar issue. We have even tried to set default value and as optional parameter. View still fails to create hierarchy (we are not using HANA live). As mentioned on page 97 of HANA modelling guide input parameter is mandatory from engine point of view. Hierarchy is generated as column view during the initial activation of calculation view and therefore expect a value by caller.
This seems to be a product error. Some one from HANA development team should explain this issue in detail. I would expect someone like Thomas Jung reply to us.
At the moment, we cant use input parameter for date prompt which gives us calendar popup feature for date selection. Hierarchies just don't work with input parameter. We are missing something.
Regards
Angad

I am getting following error! XML Parsing Error: undefined entity Location: chrome://weave/content/options.xul Line Number 6, Column 3: setting id="weave-account" type="string" title="&account.label;" / --^

I am getting followong error
XML Parsing Error: undefined entity
Location: chrome://weave/content/options.xul
Line Number 6, Column 3: <setting id="weave-account" type="string" title="&account.label;" />
--^

I had this problem - it appeared to be due to having Firefox 4 with the Firefox Sync installed as an add-on. Firefox 4 has sync included so there is no need to have it as an add-on. I went to the add-on manager and removed Firefox Sync and now appears to be working correctly.

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Ok. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AfterFX.exe
Application Version:          11.0.0.378
Application Timestamp:          4f6d63ab
Fault Module Name:          StackHash_a85b
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec4aa8e
Exception Code:          c0000374
Exception Offset:          00000000000c40f2
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          a85b
Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
Additional Information 3:          f862
Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

ERROR in NI VI -- "niSwitch Initialize With Options.vi"

Similar Messages

Maybe you are looking for