Error -1074135038 occurred at IviScope Initialize With Options.vi

Hello,
I'm new to LabView and to IVI drivers, and I'm having problem connecting to a LeCroy LT344 oscilloscope. 
I have LabView 12.0, MAX 5.3 and the lctlxxxx IVI driver installed. I already configured the driver, and I can use the VISA test panel to communicate with the scope. However, when I try to run the IviScope - Acq Wfm Edge Triggered.vi example (after choosing the IVI Logical name), it gets stucked in the IviScope Initialize.vi block, and generates the following error:
Error -1074135038 occurred at IviScope Initialize With Options.vi
Possible reason(s):
Primary Error: (Hex 0xBFFA0002) File could not be opened.
Complete call chain:
IviScope Initialize With Options.vi
IviScope Initialize.vi
IviScope [CA] - Cont Acq Wfm Edge Triggered.vi
I really appreciate any help on the matter.
Thank you,
  Vinícius

Hi,
I think is a double Post?
http://forums.ni.com/t5/LabVIEW/Error-at-IviScope-Initialize-using-lctlxxxx-driver/m-p/2123946
Are you trying to use the NI-Scope to control your Hardware?
IviScope vs. niScope Hierarchy
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/IviScope-vs-niScope-Hierarchy/td-p/1830727
Ni-Scope:NI-SCOPE 3.9.4 - Windows Server 2008 R2 64-bit/Server 2003 R2 32-bit/7/Vista/XP 32-bit
http://joule.ni.com/nidu/cds/view/p/id/3195/lang/en
Which IVI Class did you install or your hardware use?
I found something about IVI 1.4 Class. I'm not sure if it helps
http://www.ivifoundation.org/downloads/Class%20Specifications/IVI-4.1_Scope_2011-02-14.pdf
Best Regards.
Kais Mekacher
AE Germany-Munich
Kais Mekacher
Applications Engineer
Germany - Munich

Similar Messages

  • ERROR in NI VI -- "niSwitch Initialize With Options.vi"

    Apparently there is an error in the niSwitch Initialize With Options.vi supplied with my PXI 2503 switch board.  I know there are new version of niSwitch, but I am using an older one with file dates of 6/29/2000. The bug is that the "IVI New Session" sub vi input terminal "resource name" is incorrectly wired to the call library node "option string" output terminal.  The correct source for the "resource name" input is the "resource name"  output terminl of the call library function.  If you make this change the VI seems to work.  Can anyone else with the old NI switch software verify this issue?

    Good morning brent2004,
    Thanks for contacting National Instruments with your issue, we'll try our best to resolve it for you as quickly and efficiently as possible.
    I have searched in our Corrective Action Database, and have verified that NI-Switch 2.0 did have an issue with the niSwitch Initialize With Options.vi and the logical resource name.  This is an extremely old driver that you're working with, and since the upgrade is free, I highly recommend it for your project.
    Sincerely,
    Minh Tran
    Applications Engineering
    National Instruments

  • Error -107380734​3 occurred at niDCPower Initialize With Channels.v​i

    Hi all,
    While initializing NI PXI-4130 power source I got the error "Error -1073807343 occurred at niDCPower Initialize With Channels.vi".
    The routine is in a sub VI already working since two years.
    No problem accessing the supply with NI-DCPower Soft Front Panel.
    I have the problem since Thursday after installing some LabVIEW updates (don't remember which ones, just all the available).
    Is this problem known?
    Can anybody help me?
    BR
    ViP

    Dear vigna,
    I would please you to check the advices in this KB:
    http://digital.ni.com/public.nsf/allkb/8130049893D​6461E86256F3B00461E1B?OpenDocument
    When the Error still occurs please let me know.
    Kind Regards,
    Oleg Scherling, M.Eng | Applications Engineering | National Instruments | NIG |

  • "agesani Initialize With Options" timeout error on HP E4401B spectrum analyzer

    System: Windows XP Pro, LabVIEW 7.1, IVI Compliance Package 3.0, NI-VISA 4.1
    I have an HP E4401B Spectrum Analyzer.  I'm trying to write some LabVIEW code for it, using the agesani.llb library.
    When I try using the agesani Initialize With Options VI, I get the following error:
    Error code: BFFF0015
    Source: agesani Initialize WIth Options.vi<ERR>Driver Status: (Hex 0xBFFF0015) Primary Error: (Hex 0xBFFF0015) Timeout expired before operation completed.
    I've searched the NI Knowlege Base, and haven't found anything that seems useful.  What I _have_ found are the following items.
    Knowlege Base article "Time-Out Error with the Agesa Instrument Driver Example".  This refers to the agesa drivers, not the agesani drivers.  It also references an E4440A spectrum analyzer, not an E4401B.  The article says one cause could be that a compatibility mode other that SCPI is in use.  While the articles says how to fix this on an E4440A, the fix does not appear to apply to the E4401B.  In fact, if it is even _possible_ to have a mode other than SCPI on an E4401B, I can't figure out how to do it.  A second possibility the article suggests is that the spectrum analyzer is in Phase Noise mode rather than Spectrum Analyzer mode.  My E4401B is in SA (spectrum analyzer) mode.  I don't even see a way to put it in any other mode - I don't think the required options are installed.  Finally, my VI is configured as the article states - ID Query YES, Reset Device YES, etc.  I should note that the instrument's GPIB address is 18, and that this matches the resource name GPIO0::18::INSTR.
    Some additional information: The spectrum analyzer's screen is indicating the instrument is in Remote (R) mode as a Talker (T).  A "Query UNTERMINATED" error message appears at the bottom of the instrument screen.
    I've attached the results of a NI Spy capture to this message. (At least, I think I have. I've never tried doing this before, so if it doesn't show up, would some kind soul tell me how to include an attachment to my post?)
    Oh, yes.  The agesani version is driver version 1.1, updated 17 Aug 2007.  (The version that's currently on the NI download site.)
    Attachments:
    Capture4.spy ‏9 KB

    Hi MXI Master,
    If there's an instrument timeout, I haven't been able to find it yet.  Seems like there should be, so maybe I just haven't looked in the right place yet.  As for the timeout value on the computer, I'm not sure what you mean by this - could you elaborate, and maybe tell me where to find it?
    As far as SCPI mode, if it's possible to put the E4401B in something _other_ than SCPI mode, I haven't figured out how.  I can't find any support in the programming manual for anything other than SCPI.
    That kind of seques into my next couple points.  The NI Spy output indicates that one of the commands that is being sent is "*SRE 32".
    The "User's & Programmer's Reference" for the E4401B says (on page 206) "Send the *SRE <number> command (where <number> is the sum of the decimal values of the bits you want to enable plus the decimal value of bit 6).  [Bit 6 is the Request Service (RQS) Summary Bit.  BP]  For example, assume that you want to enable bit 7 so that whenever the operation status summary bit is set to 1, it will trigger a service request.  Send the *SRE 192 (128 + 64) command."
    This statement would seem to imply that the "*SRE 32" command that is being sent by the agesani "Initialize With Options" command is an illegal command, or at best an ineffective command.  In light of that, it is interesting to me that the NI Spy output indicates that the next line , viQuery(GPIB::18::INSTR (0x246E9C8), "%s?","%ld"), is generating an 0xBFFF0015 error.  In addition, I can find neither the "%s?" nor the "%ld" commands listed in the Programmer's Reference.  I wonder if these could be for a firmware revision later than mine (A.01.03), or for instrument options I don't have (A4H, A4J).  Alternatively, I wonder if these are simply mistakes.
    The next line in the NI Spy output, Formatted viWrite(CPIB0::18::INSTR (0x0246E9C89),"INST:NSEL?",11,11), also puzzles me.  The Programmer's Reference indicates that this is a supported command, to see what instrument application is currently selected.  (e.g. spectrum analyzer, GSM, Bluetooth, EDGE, noise figure, etc.)  However, when I try to issue this command to my instrument, by using the Instrument I/O Assistant Express VI, I get an "Undefined header" error on the instrument's front panel.  The instrument's error history shows the same "Undefined header" error.  Since my instrument only has the basic spectrum analyzer option installed, I wonder if this command is not valid?  (Personally, I wouldn't write instrument firmware code this way, but who knows?)  Alternatively, I wonder if this command requires a firmware revision more recent than mine.  (The Programmer's Reference is silent about this possibility.)
    The next line in the NI Spy output, Formatted viRead(GPIB::18::INSTR (0x0246E9C8),"",4000,0), has another 0XBFFF0015 error associated with it.
    Does this information shed any more light on the situation?

  • Tek_tkdpo4​k initialize with options vi driver (hex 0xbfff0011​) primary error (hex 0xbfff0011​) insufficie​nt location informatio​n or the request device or resource is not present in the system

    Dear Friends,
    I am from Jesus Osorio from Tektronix Mexico. I have seen this error messages during the last instalations and I am wonder how could I solve it?
    tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insuff...
    I am using DPO4000 series, laptop with SE for Tektronix Edition and a USB cable. What should I do to solve this problem?
    Regards,
    Jesus Osorio
    Jesus V. Osorio Lopez
    AE

    Dear Jesús,
    You should check if you have on your PC or Laptop installed VISA. I recommend you this link to download it:
    http://digital.ni.com/softlib.nsf/websearch/b1a783​7fffd2826e8625729100689d3c
    To have a better oportunity in having your issue solved, please contact us in Mexico at this toll free 01 800 010 0793. As well as if you post your following messages in the Spanish Forum, we will be able to help you faster.
    Thanks for using National Instruments Forums.
    NorSa
    NI Applications Engineer Latin America
    NorSa
    NI Applications Engineer Latin America
    Para Soporte entra aquí

  • Error -1074126826 occurred at niSwitch Initialize.vi

    I'm getting an intermittant error with my switch card:
    Error -1074126826 occurred at niSwitch Initialize.vi
    Possible reason(s):
    Max time exceeded.
    Device: SWT1-DUTSwitching
    Status Code: -200221
    It happens about 25% of the start-ups (fixed with a restart).  I can't find the error codes in any documentation - has anyone got any ideas please?
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

    G'Day Chad - thanks for your answer: after several weeks of testing I haven't had the error message since I upgraded to 3.3.1!  Well done
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Error -1074118653 occurred at niRFSA Initialize.vi

    I am currently using NI PXI-1045 to test RF signal from a device under test. I am using an exact copy of an example used for NI-RFSA. The unit under test is connected to the input of Ni PXI-5600 which is wired with Ni PXI-5142 to create NI-PXI-5661. When I run my vi, I got the following message " Error -1074118653 occurred at niRFSA Initialize.vi
    Possible reason(s):
    The device specified is not supported by this driver.
    Status Code:-223543"
    Would you please help?
    Regards,
    Jean-Richard
    JR
    Solved!
    Go to Solution.
    Attachments:
    RFSA_testing_RF_output.vi ‏18 KB

    OK, then open Measurement and Automation Explorer(MAX). It sounds like you need to associate the downconverter with the digitizer. On the left side of MAX expand the devices and interfaces tree and then expand the chassis tree. Right click on the 5600 device (slot 8) and select properties and associate it with your digitizer.
    Using LabVIEW 2010SP1 and TestStand 4.5

  • Error An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb

    Hi, 
    Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
    I already removed the update suggested on other threads (KB2844286), but everything remains the same.
    I always receive errors like this one:
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
    what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
    When I try to access administration tools it happens the same error, and I don't know what I can do more. 
    Please help me.
    best regards,
    Jorge Guimarães

    I followed some tips, to trace the error, allowing some trace debug, and got this:
    Server Error in '/' Application.
    Object reference not set to an instance of an object.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
    Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
    Source Error: 
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
    Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
    Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
    Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
    Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
    Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
    Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
    System.Web.UI.Control.LoadRecursive() +65
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Control.LoadRecursive() +190
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
    Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479

  • An error has occurred because a control with id '%spPlaceHolderMain%' could not be located or a different control is assigned to the same ID after postback.

    Hello All, When i try to do a filter on an entity and click filter button, i see the below error message being popped up. Can someone provide a solution to this ?
    "An error has occurred because a control with id '%spPlaceHolderMain%' could not be located or a different control is assigned to the same ID after postback. If the ID is not assigned, explicitly set the ID property of controls that raise postback events
    to avoid this error."
    Please let me know the process to set the ID explicitly.

    Can you try resetting the IIS?

  • Sync Error "An error has occurred please try again" with Contacts using Desktop Manager

    Hello,
    I've been trying to fix my Boss's sync issue for sometime. I hope some one can help.
    He has a BB Curve
    He uses Microsoft Entourage 2008 sync'd with Mac's Address Book
    His desktop manager is up to date
    When syncing contacts he gets "An error has occurred please try again"
    I went under advanced settings and click replace everything on blackberry device. That worked and his phone is now up to date with his address book however if you don't click "Replace.." the error still occurs.
    He fusterated because he wants to be able to sync back and forth not just from his computer to his phone. I hope this all makes sense and someone can help.
    Thank you

    demzi11 wrote:
    I have the same thing! I have no idea how to fix it
    Hi and Welcome to the Forums!
    Read the KB that Xandrex linked...it cures this situation in something like 75% of the time.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • An Error has occured when trasfering file with R/3 order

    Hi Guys,
    Could you please help me on this.
    when saving the order in CRM my i got this error..when i go into error details.
    "Inconsistent update flags (Notification E C( 004)"
    what needs to be done to slove this error.
    what are the possible reasons for thsease.
    Thanks in advance,
    Regards,
    Shaik

    Hi Shaik,
    Please check the following notes. This will be of helpful.
    1056966 C( 004: Inconsistent update flags                    
    1125147 C( 004: Inconsistent update flags                    
    1044818 BDOC status is 'yellow' - What should I do?          
    718044 Composite SAP Note 'Inconsistent update flags'       
    Thanks
    Abishek

  • Configure Synchronization Connections An error has occurred while accessing the SQL Server database

    Hi,
    i am getting following error message
    Central Administration --> Synchronization Connections
    An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
    If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
    Central Administration -->  Manage Profile Service: User Profile Service Application --> Manage User Properties
    Error
    An unexpected error has occurred.
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3bce5a11-f2dc-4788
    Please tell how to fix it.
    iffi

    Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
    for  User profile page not display  number of count in the page first check services , connection , 
    IISRESET /NOFORCE   /  timer services restart 
    Deepesh Yevle MCTS

  • "an error has occured" while downloading OS X Mountain Lion

    I have purchased the OS X Mountain Lion and it downloaded about half way on my macbook then stopped. Now when i go into the app store under purchased it says "an error has occured" and there is no option to resume the download, how can i get it to download again?

    Try this one. There is some troubleshooting information and a link to contact them.
    App Store Support
    This has worked for some people.
    - Sign out of the App Store (in the Store menu)
    - Quit the App Store
    - In Finder - Go>Go to folder...  (or Apple-shift-G)
    - Paste in the following "~/Library/Caches/ "
    - It will take you to a folder.  Delete com.apple.appstore
    - Launch the App Store.  Sign in and then reclick the Mountain Lion buy.  It won't charge you again.

  • HT202159 I started download of OS X Mountain Lion and it stopped with "An error has occurred" with no option to resume download. When I go to appstore it shows but again.

    I started download of OS X Mountain Lion and it stopped with "An error has occurred" with no option to resume download. When I go to appstore it shows but again.

    Try this Discussion...
    https://discussions.apple.com/message/19032230#19032230

  • I was installing a new update on my MacBook Pro. With only 20% left it said "an unknown error had occured, please restart your computer." Now that I've restarted - I can't log in!

    Ok, my MacBook haven't had any issues earlier, until today. At first Safari was acting kind of weird in that sense that a lot of letters were missing when you went on certain webpages, so I thought of updating since an alert-window popped up and notified that new updates were ready to be installed. So I opened up App Store through my Applications-folder and selected update.
    First it asked if I wanted to connect my Mac to a powersource but since I had charged the battery to 79% I didn't think it was necessary. So I continued, computer restarted and began installing the updates.
    Everything went fine until it was approximately three minutes left. An error message popped up and said something like "An unknown error has occured. Please restart your computer and try again". I pressed OK, rebooted my computer and when it asked for my password I typed it in. After I pressed OK, the computer indicated it was the wrong password. I tried multiple times and sometimes with different passwords... so now I can't simply log in! What's the problem?
    TL;DR - Updated mac, failed after five minutes and now I can't log back in since "I have the wrong password"

    Forgot Your Account Password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.

Maybe you are looking for