Error in Outbund Status in SXMB_MONI
Hello ,
My scenario in XI is File to IDoc. I have done all the necessary settings.However, my Idoc is not getting posted in R/3.
When I see the message in SXMB_MONI it shows the status as processed succesfully.but <b>the Oubound status of message is in error</b>.
it wud b really very helpful if somebody cud throw somelight on this.
Regards,
Ashwin M
hi ashwin
check the authorization for the user that you are using in RFC destination to log into R/3. In R/3 that user may not have the authorizations to post the IDoc.
In that case give proper authorizations to required objects ....then it should work
Regards
Sheetal
Similar Messages
-
Messages in Schedule status in SXMB_MONI and going into queue in SMQ2.
Hi Experts,
All messages in XI going to schedule status in SXMB_MONI. When i check in SMQ2 to release after some time the messages are going to "SYSFAIL (Time limit exceeded)" status.
When i double click on the message in SXMB_MONI, the system is going to "Runtime Error (TIME_OUT)".
Could anyone please help me how to fix this issue.
Thanks in advance,
GRKHi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish -
MR11 error message system status CLSD is active
MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .
If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status. -
Sending An Error Message as Status Message
Hi,
I have a selection screen which was (Object Oriented program ) defined through Function Group and calling via Function Module. when the transaction Starts with selection Screen and we have few buttons on the selection screen, when we enter data and we need to press F9 we are validating the data and we need to give an error message, i am doing same, but the error message was coming as pop-up, once i click on the pop-up it is getting out of the selection screen. but actual requirement was it has to stay
back on the selection screen.
Is there any way to give the error message as status message instead of
pop-up.
Thanks In Advance.
Regards
NagsHi,
We have an option to set this, the last button of the menu(button will be in multiple colors) , press that and select the settings, a pop up will open, there in one of the tab, you can select the option to display the mesage in the status bar
Regards
Sudheer -
I want to show a status bar that needs to be persistent on a page. for this I used the following in my master page
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'yellow'); /* Set a status-color */
HTML, call the JS method:
<a onclick="ShowStatusBarMessage('Title'!','Awesome message!')">
Display Status Bar message!
</a>
ref:
http://www.zimmergren.net/archive/2010/03/17/sp-2010-dynamically-displaying-messages-to-your-users-with-the-notification-and-status-bar-areas-in-sharepoint-2010.aspx
But what I want is
to call the function on load. So I used pushed ny function to _spBodyOnLoadWrapper using _spBodyOnLoadFunctionNames.push("YourFunctionName");,
it throws an error 'SP.UI.Status' is null or not an object
Next I created and
deployed a webcontrol and did a registerclientscript, that too gives me 'SP.UI.Status' is null or not an object
// Define the name and type of the client scripts on the page.
String csname1 = "AlertScript";
Type cstype = this.GetType();
// Get a ClientScriptManager reference from the Page class.
ClientScriptManager cs = Page.ClientScript;
// Check to see if the startup script is already registered.
if (!cs.IsStartupScriptRegistered(cstype, csname1))
StringBuilder cstext1 = new StringBuilder();
cstext1.Append("<script type=text/javascript> alert('Hello World!');");
cstext1.Append("var statusId = SP.UI.Status.addStatus('title', 'message', true);");
cstext1.Append("SP.UI.Status.setStatusPriColor(statusId, 'yellow'); </");
cstext1.Append("script>");
cs.RegisterStartupScript(cstype, csname1, cstext1.ToString());
What am I missing ?
How can I get to show a status bar on load of any page, just as you get a health analyzer message when you get into the Central Admin?
Thanks, Mano
Mano Mangaldas | Blog : http://howtosharepoint.blogspot.comOk, for some reason, it is not working for me. Below are the code that didnt work for me
<script type="text/javascript">
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'red');
ShowStatusBarMessage('Title!','Awesome message!');
</script>
This too didnt work
<script type="text/javascript">
function ShowStatusBarMessage()
var statusId = SP.UI.Status.addStatus('Some title', 'Some message', true);
SP.UI.Status.setStatusPriColor(statusId, 'red');
_spBodyOnLoadFunctionNames.push("ShowStatusBarMessage");
</script>
I did try to register client script block programatically, that too didnt work
String csname1 = "AlertScript";
Type cstype = this.GetType();
// Get a ClientScriptManager reference from the Page class.
ClientScriptManager cs = Page.ClientScript;
// Check to see if the startup script is already registered.
if (!cs.IsStartupScriptRegistered(cstype, csname1))
StringBuilder cstext1 = new StringBuilder();
cstext1.Append("<script type=text/javascript>");
cstext1.Append("var statusId = SP.UI.Status.addStatus('title', 'message', true);");
cstext1.Append("SP.UI.Status.setStatusPriColor(statusId, 'yellow'); </");
cstext1.Append("script>");
cs.RegisterStartupScript(cstype, csname1, cstext1.ToString());
Any help appreciated.
But the below code works..
<script type="text/javascript">
function ShowStatusBarMessage(title, message)
var statusId = SP.UI.Status.addStatus(title, message, true);
SP.UI.Status.setStatusPriColor(statusId, 'yellow'); /* Set a status-color */
</script>
<a onclick="ShowStatusBarMessage('Title!','Awesome message!')" href="#">
Display Status Bar message!
</a>
Thanks
mano
Mano Mangaldas | Blog : http://howtosharepoint.blogspot.com -
I just installed Adobe CreatePDF desktop printer on a Windows 7 home PC. When I try to use from Word or EWxcel, it does not print. The Adobe print device queue reports an "error" in the status column.
Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well... -
Error in activating status profile for SVT
Hi,
I've been trying to activate status profile EHS_SO for SVT in REACH compliance version 2.0 . But I am stuck.
When I save a sales order, a message-'Error when activating status 0001 for status profile EHS_SO in order XXXXXX' has come up. My IMG settings are as follows:
Sales documentr: No existing status profile used
Status profile: EHS_SO added with status SD
Environment parameter:SVT_SO_PROFILE: EHS_SO
SVT_SO_STATUS: 0001 used
Activate Status profile: STUCK (can't figure out the object type for VBP object type category)
Does anyone know?Hello Bomi,
Please see SAP note # 1111196. It talks about Status profile for sales order and status profile for production orders for online check for SVT.
May be useful to you.
Regards,
Niraj -
Hi ,
i am getting an error message in pop-up box ,can we show this same error message in status bar..?
Thanks.Hi shiva ,
data : dtype type c value 'S'.
MESSAGE E053(z4) DISPLAY LIKE dtype.
my code is like that,but still it shows in popup window.
can you check it once...?
Thanks -
Error-IM258-This refers to an error in central status management.
Dear All
We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
But while executing IP10 system throws an error message as follows
Error Msg no: IM 258- Object does not exist (Status Management)
This refers to an error in central status management.
Kindly help on the above issue
Regards
Thyagarajan
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 11:10 AM
Edited by: thyagarajan krishnamurthy on Feb 18, 2011 2:28 PMDear,
Please refer the OSS Note 437878 - Status data missing for PM/CS notifications .
Regards,
R.Brahmankar -
Linkinking error msg on status bar and a popup window
Hi
My requirement is that whenever an error msg comes on status bar after execution,i need to double click
on that error msg and followed by that a popup window should appear with the customised details about error msg.
plz suggest some solution or some function module which gives popup on double clicking on error msg.
Thanks in advance,
Arya.Hi,
my question is that this popup should be populated by customized details i mean suppose error message on status bar is asking 'authority scheck for one or more plants have failed.would you like to see the details'.Now if user double clicks on status error message pop up screen should contain all the plant numbers for which authorization has failed.I hope this clarifies my question.
thanks -
hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur -
What is the meaning of Recorded Status in SXMB_Moni ?
Hi Experts
What is the meaning of Recorded Status in SXMB_Moni ?
it showing green flag with recorded status
Thank You
G.Praveen Kumar
Tecnics Integration Technology .
PI ConsultantHi Nilesh/Divya,
Goto SMQR and activate corresponding queue
What if the Queue is registered....do registered Queues not face this type of problem??
Regards,
Abhishek. -
CreatePDF printer File shows ERROR in the status column and will not upload to my account
When printing to the CreatePDF printer. the file shows ERROR in the status column and will not upload to my account
Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well... -
Dear ALL,
I'm working on SAP BPC 10.0 NW version.
So, I'm launching a script logic for a particular company, actually working on the currency translation but unfortunately I got an error "Error checking work status".
I did enable the Work Status in my model, and I did also put 2 Controls in it. But, I'm very sure the 2 Controls are all pass which I could also see the same from Control Monitor.
Any part which I could have missed out or any steps I have to work on in order to skip the error?
BR,
AntonyHi Antony
Finally the problem was bigger than I thought; the user uploaded data from previous period and it’s affected the currency conversion, because it is configured at periodic way
The access member profile for each group was configured wrongly, too
We fix this point and the currency conversion and the work status pass OK
Thank for your time answer its
Regards
Ariel -
Package Log - Error checking work status
Hi, Experts,
We are using SAP BPC 10 NW.
When we run a package manually it is ok. But when we include it at package link (with the same prompt) and run it, we received error message (Error checking work status). Look at the log below:
++++++++++++++++++++++++++++++++++++++++++++++
/CPMB/MODIFY finished in 0 seconds
/CPMB/ALLOCATION_LOGIC finished in 449 seconds
/CPMB/CLEAR finished in 0 seconds
[Selection]
SELECTION = /CEREAL/EXPENSE/PRIVATEPUBLICATIONS/BPCADMINBIP/TempFiles/FROM.TMP@@@SAVE@@@@@@EXPAND@@@|DIMENSION:CATEGORY|PROJETADO,REVISAO|DIMENSION:ENTITY|CC_11
[Message]
RUN_LOGIC:
Error checking work status
+++++++++++++++++++++++++++++++++++++++++++++++
There is no work status activity at REVISAO and PROJETADO category members at this model.
Would anybody help us to understand what is happening?
Best Regards,
Ana TeresaHi Ana
I found a related note.
1945016 - "Error checking work status" when executing package
Symptom
There is "Error checking work status" in the status log after executing clear package:/CPMB/CLEAR.
Environment
SAP BusinessObjects Planning and Consolidation, version 10 for SAP NetWeaver
Reproducing the Issue
Run clear package:/CPMB/CLEAR
Set check work status when clearing as YES. ("CHECKLCK"=YES)
Check detail status log
CauseWork status is not set or not found for the "to be cleared" data.
Resolution
Try to change the work status of the data in EPM and check if system pops up with "work status not found".
If yes, check in work status table (you can get the table name by running program UJ0_GET_GEN_TABNAME) if there is default work status assigned.
If yes, check UJW_STATCODE table in SE16, incase the line which contain field ORDERN=0 is missing, run program: UJW_UP_INSERT_0_STATE to insert this line.
See Also
1862768 - EPMWorkStatus function displays wrong status
Hope this helps.
Regards
Juan Pablo
Maybe you are looking for
-
How do I stop iTunes from automatically importing songs I listen to from my external hard drive into the music library?
-
ICal not indicating final day of event by a placing a dot in month view
I consider this to be a bug: on my iPhone 5, in month view, when I input a multiple day event, there are dots everywhere indicating that something is occurring that day. However, the last day of a multiple-day event, no dot appers. For example: If I
-
Features id like to see added to Windows 10
Features id like to see added. First i'm a advocate for windows 8.1 after i avoided 8 like the plague. I currently have two beautiful machines running windows 8.1 and i love them. Especially my new Surface pro 2. I love everything about the surface a
-
Problems with iTunes on Windows Vista...please help
All started with my Laptop recognizing my iPad and iTouch just as a camera I keep getting this error in spite of all the methods already listed....one step from formatting....this is the order of appearance of the errors please i need help ALREADY TR
-
How to update the screen in realtime?
Hey, i am realy new in Indesign scripting i want to do a simple client script- the script should receive data and write it to a textbox (or do sth else with it). Everything works fine the only problem is: I dont know how to make this in realtime- for