Error In Production XI system URGENT

Hi Experts,
Its very URGENT.
I have one problem in Production XI system.
we have one interface which is running fine for india.
In this they are using multi mapping to split the messages according to the company codes and are sending to the same FTP server ie INDIA.
Here in the input file have only INDIA data.( Initially there is no BPM in this interface) .
Now they are sending UK and INDIA data in the same input file.
Now we need to send UK data to UK FTP server and INDIA data to INDIA FTPserver.
For this we have used BPM to route the messages.
NOw in receiver determinaion we have configured two receivers one for UK data and also we have used XPath condition to the UK company codes.
If no records are with the UK data then it has to route to the INDIA FTP server.
For this we have used that if NO receiver found then it has to continue message processing with the INDIA FTP server ( Here at RCVR Detemination we have used 3rd radio button).
Plz help me its URGENT.
Points shouldbe rewarded
regards
sreeni

Continue for the ABOVE message.
Here We got one error, that in the 3rd radio button at RCVR Determination in production system, QA and Integration system also the same business system BSD_XX is coming.
But actually it is as follows.
INT--> it sholud be BSI_XX
Qa--> it sholud be BSQ_XX
Prod--> it sholud be BSP_XX
plz keep posting to clarify this issue.
thanks in advance
regards
sreeni

Similar Messages

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Factory restore error message - "Product Restore %s failed to restore your system"

While doing a factory restore I am getting the error message - "Product Restore %s failed to restore your system".
Not sure what it means ... I am on a Lenovo 3000 N100. I've been having not so much battery won't charge as battery won't stay charged problems.
When starting up with the battery in ... the battery seems to bedrawing so much from the adapter the N100 shuts down.
While shutdown the battery seems to draw from the cmos battery.
When I power up again the cmos battery is drained ... the bios clock has to be reset.
A few times like this and I took the battery out and just ran on the adapter.
Taking the battery out didn't stop the n100 from timing out(read turning off). What did stop it
is going into the memory panel when its off and power is diconnected and shorting the Cmos battery.
Then when powered up it goes straight into loading the recovery package and actually
gets to the point where it is ready to format the disk before it gives me the message - "Product Restore % failed to restore your system".
Last night I actually got it to factory restore ... but then like a complete idiot I put the battery
back in thinking the restoration would have resolved the charging problem ... it didn't.
I know ... I know ... I'm a couple of months too late for a new battery ... but if anybodies got any ideas
how to get around this ""Product Restore %s failed to restore your system"" so I can get back
to windows I'd appreciate it.

I've had a similar problem when attempting a restore to factory settings on my Lenovo 3000 N200, running Windows XP. I resolved it by leaving the battery plugged in, but by disconnecting the AC power adapter. Then when the restore was up and running I then plugged in the adapter so the laptop wouldn't run out of power before completing the restore.

Error - Update Product Data in Solution Manager

Hello,
We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
Error : Update Product Data in Solution Manager
Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
Any information is highly appreciated. Thank you.

Hi Jaypee,
Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
Extract from this guide for this problem:
Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
Thanks
Sunny

Valuation with material cost estimate: error with product "117122"

Hi people,
We have the error:
=====================
Valuation with material cost estimate: error with product "117122"
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
We have the follow configuration in trans.: KE40:
. Determine material cost estimate
   . Transf. Standard Cost Estimate
. Costing Variant
. Control Data for Standard Cost Estimate
   . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
. Addiitonal data CO-PC
    . Transfer cost estimate in controlling area currency "activated"
We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
Do you know what happend?
If we need to configure some transation, or sonly process the cost estimate?
Thanks,
Rosana.

Hello Guido
Thank you very much for your return.
It is happenning in a Client that some people are doing the configuration.
Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
And now, the people activate that in this new Client and I don't know the impact about that.
I think we have to make the configuration in OKYW.
The other transation you told me, we don't have any information.
Could you tell me some other idea what happend?
Message error is just "Message no. KE350"
Abou claculate the cost:
It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
Could you tell us is there is some thing more to do?
Thanks,
Rosana.

Error in external tax system: SAX processing failed on input stream SAX pro

Hi
When I was posted in T.Code: FB70, (Customer Invoice) I am getting below mentioned error.
Error in external tax system: SAX processing failed on input stream SAX processi.
I put tick mark on calculate Tax column and select O1(A/R Sales Taxable).
Pls. help me.
Thanks
Ranjith

Hi Ranjith,
I also face this problem in Production now.
Could you kindly share with me how you resolved this issue?
Thanks,
Markus

Error connecting multiple BW systems to one OLTP system

Hi BW Gurus,
As part of a major project we had to create a copy of our production BW system and thus have two BW systems connected to one production R/3 system. Before we proceed with the production systems, we decided to try it out with our staging systems.
1) Created a copy of STG BW (already connected to STG R/3) and renamed it to TST BW.
2) Transaction BDLS, renamed the logical system ID
3) Made sure all partner profiles were available and active
4) Since there was no connection between TST BW and R/3 STG, tried to activate the source system in TST BW. As per OSS note 886102, tried the restore functionality but we are running into a strange error.
Table RSBASIDOC in the source system already has an entry for STG R/3 and STG BW with IDOC TYP ZSSA015 and Prefix "SA" and now it complains that since this prefix alrady exists, it cannot create another entry with the same prefix for TST BW and STG R/3. It gives us the option to delete the existing entry and create a new one for TST BW. This in turn de-activates the delta between STG BW and STG R/3 and we can successfully initialize with the new system.
This process turned the queue entry in RSA7 red for STG BW and created a new one for TST BW (green). Delta stopped working for STG BW.
How can I have both the systems connected and run delta process simulataneously? I have read OSS note 775568 but this is after the fact that the two systems are already connected.
If I have to start from scratch, can someone please outline the steps involved?
Do I have to restore the source system or is there an alternate way? I cannot see how the delta would work if there is no connection betweeen the two systems.
Do I even need to worry about initializing with the TST BW System or can I just run the delta process and it would automatically add another entry in RSA7.
Any help would be truly appreciated and rewarded!!
Thank You.
Sreedhar

Looks like a much bigger issue than that. We did create the partner profile in WE20 but that didn't help either. It still complains about the prefix. This 2 Character prefix value is actually derived as the concatenation of the first letter of the BW system name and starting alphabet in a sequence. In our example STG BW has prefix of SA and the basic idoc type is ZSSA015. Based on this, TST BW system should have prefix of TA and basic idoc type might be ZSTA016. The program initially looks at RSBASIDOC table for source system and finds value SA and complains that this cannot be used again.
I have seen messages in this forum where people have actually done this and hopefully someone would reply back as to how to resolve this issue.
My main question though is, do we have to restore or activate or do not have to do anything to the source system after the copy of BW systems? None of the above three options seem to work for us right now.
Any ideas?
Thank You
Sreedhar

Error in Production Load: Error passing data to port

Hello All,
I got this unexpected error in production. The Jobs are still processing for a long time(in Yellow status) with the error message :
Extraction (messages): Missing messages      (Status:Yellow)
     Missing message: Request received      (Status:Yellow)
     Missing message: Number of records sent     (Status:Yellow)
     Missing message: Selection Completed     (Status:Yellow)
Transfer (IDocs and TRFC): Missing messages or warnings           (Status:Yellow)
     Request IDoc : Application document posted                (Status:Green)
     Info IDoc 2 : sent, not arrived ; Error passing data to port      (Status:Yellow)
     Info IDoc 3 : sent, not arrived ; Error passing data to port      (Status:Yellow)
     Info IDoc 1 : sent, not arrived ; Error passing data to port      (Status:Yellow)
I went through the below forumn, and asked the basis to look in to it. In the meantime can any one please suggest me any solutions.
Some problem with IDoc's Settings while loading data

Hi Ram,
The problem may be with the connection to the source system you are loading the data from. You can check the connection using the note 140276.
Best Regards,
Des.

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

Error in Local Message System: No authorization to logon as trusted system

Dear all,
When I am posting the message in Production system which I have configured with my solution manager
I am getting the error like "Error in Local Message System: No authorization to logon as trusted system. So trusted message can not be posted"
I checked with SM59 which I created the RFC destination, in that i selected for both the system ie Solution manager as well Production system 'Trusted System=Y'
Please suggest me how to solve this issue
Regards
Sudharshan

Hi,
please use the search function.
There are ALOT of topics regarding Trusted RFCs, table BCOS_CUST, RFC Back Destination to Sol Man and so on.
/cheers

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

XML errors message (Product key not found/Invalid) in SNC5.1

Hi,
I am working on SNC project which includes POC scenario.I have completed all the required configuration in R/3 4.6c and SNC5.1 system. The master data (mat, plant,vendor and Info records) are CIFed from R/3 to SNC, BP and MoT created in SNC. All the MD BAdIs are implemented in SNC. I am trying to post a PO from R/3 to SNC, IDOCS are successfully generated, PI has converted the IDOCS into XML messages, but i am getting XML error in SNC system (sxmb_moni) which states-
1) Product key 000000000123456 (category ID) not found
2) Item 00001: Product is missing or invalid
3) Order, item 00001: Product 000000000123456 does not exist
4) BOL processing failed. XML-message inbound processing has been terminated.
I am able to post the PO successfully in SNC Web UI which has alpha numeric product number (eg- 1120-110), but products with numerical value leading zeroes (eg- 000000012345) do not get posted. These product IDs give error in SNC sxmb_moni.
I have set up the output format of product number with 40.
Appreciate your help.
Is there any kind of configuration required for leading zeroes in any of the systems (R/3,PI or SNC)
Appreciate your help.
Regards,
Edited by: Dmohite on Jun 11, 2009 11:09 PM

Hi Bharath,
Were you able to over come the error for products in the XML message? I have same issue, can you please briefly point me in right direction?
I am facing the error message " Product key 0000000000xxxxxxx (category ID) not found". can you please briefly mention how did you resolve?
In my case, the XML message had product number '000000000070000598' and I tried to implement BAdI to make the product number appear as '70000598' and still it failed.
Thank you in advance
Best regards
Vivek
Thank you in advance.
Best regards
Vivek

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

Authenticate users to production portal system

At this new installation, portal wants to import roles/users from the production portal system, not prod BW. Wonu2019t that cause errors for connections with u201Cuse SSO when refreshing reports at view timeu201D? Note, we havenu2019t set up SNC yet.
Environment:
BOE XI 3.1 SP2
Solaris
NetWeaver Application Server
SAP Kit

Thanks Seb. It looks like you can import roles from a nonBW system. ... maybe as long as you've got the transports.
Yesterday BASIS successfully entitled the prod entriprise portal system, imported roles and users into CMC. These users - like PEP~123/user - errored last night with
"The SAP SSO authentication process will fail because the current user doesn't have an alias that matches system DBWCLNT111.. (WIS 10901)"
... when I changed a DBW~111 connection to u201Cuse SSO when refreshing reports at view time"
BOE doesn't have DBW111 users. If I did have roles/users from DBW111, BOE would think them different users than PEP~123 users. Trying to alias them together (can't w/o Enterprise id or similar) one id at a time is a bad path to go down.
I'm not sure SNC will overcome. ... like passing the id without the system qualifier. Anybody know?

Error In Production XI system URGENT

Similar Messages

Maybe you are looking for