Error in the Product Transfer

Hai guys,
when I am monitoing the BDocs the product_mat bdoc is gettign struck int eh inbound queue and when I chekced the bdocs in the SMW01 transaction ,
I am gettign the folwloing info
Assignment tax for country FR, sequence 3, value A is not possible
Message no. CRM_PRODUCT_SALES038
Diagnosis
No assignment has been maintained for the value A for the country FR and tax sequence 3.
Procedure
Contact your system administrator.
Procedure for System Administration
Check whether you want to transfer the entry to CRM. If this is the case, maintain the assignment table. Otherwise correct the data in the R/3 System.
I could not figure the table where this tax category is stored in the R/3 so that I cna create the same tax category in the CRM.
Can you guys help me out

I have exactly the same issue.
However it is not clear from your response how the issue was resolved.  In my case the error is:
Assignment tax for country GB, sequence 1, value O is not possible
Assignment tax for country GB, sequence 1, value P is not possible
Would be greatful if you could clarify hos this issue was resolved
Regards
Ed

Similar Messages

  • Error installing Office 2013 on Server 2012 R2 RDS - Error 25004: the product key you entered cannot be used on this machine

    Hi there,
    I really hope someone can help me as I am tearing my hair out trying to get this resolved!
    I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
    so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
    likely due to previous Office 2013 trials being installed on the system."
    In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
    through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
    Where or what file does the installer look at to see that a previous version was installed? 
    I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
    Really really appreciate anyone that can help me on this,
    Thanks

    Hi,
    I have definitely heard your frustration, and I’ll try my best to help you.
    Since Office 2010 installed on it before, you need to remove Office 2010 completely.
    KB about this error:
    http://support2.microsoft.com/kb/2792178
    A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
    http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

    I try to download the OS X Mountain Lion, and I keep getting an error saying, "The product distribution file could not be verified. It may be damaged or was not signed." Please Help!

    If you have Intego VirusBarrier X6 installed
    1. Open /Applications/VirusBarrier X6.
    2. Click on the "Surf" button.
    3. Click on the "Ad Banner Filter" tab.
    4. Click "OFF" next to "Banner advertisement filter".
    5. Start the computer in Safe Boot, then restart the computer into normal mode.
    If don't not have Intego Virus Barrier installed
    1. Verify that the date and time is correct on the computer.
    2. Safe Boot once, then restart normally, then try downloading again.
    3. Try with a different user account if the issue persists
    If the issue persists
    Install Lion onto an empty partition (internal or external).
    Note: You can Use Disk Utility to live partition the internal drive and create a second partition large enough to install Lion.
    Start from the clean installation of Lion.
    Download Mountain Lion from the Mac App Store. Note that the original startup disk can be set as the destination for Mountain Lion during the installation process.

  • Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

    Whenever I try to update my iPhoto program I get this error message "The product distribution file could not be verified. It may be damaged or was not signed."

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Mavericks Update - Error message - The product distribution file could not be verified

    Help!
    Trying to download mavericks (from 10.7.5) as I have just had a new hard disk isntalled and need to start from scratch.
    Wanting to re download iphoto but I can't as I need a newer OS so trying to download mavericks from the app store. My internet is very slow and keeps cutting out so I have tried a few times but it's not working.
    Now I'm getting an error message - 'the product distribution fil could not be verified'
    If anyone can help that would be great.
    Or even let me know where I can get a copy of iphoto to suit OS 10.7.5 so I don't need to download a whole new OS.

    You're trying to download a 5 GB file. If your Internet connection is lousy, you won't have much success. Try another network.

  • Error extracting the product installer for trial downloads

    Hi-- I tried to download the trial version of Creative Suite Design Premium last night. Waited the two+ hours for the process, and at the end I got the message "Error exracting the product installer (Error 101). Check for available disk space on your system and try downloading the product again." Because it was by then late, I left it and came back to it today. I assumed that the CS was too big for my system, so I decided to just install the two products I really want, Photoshop CS Extended, and Illustrator, separately. Unfortunately, I got the same error messages. Tried the troubleshooting advice to no avail. My computer has plenty of disk space available (1.34 TB of free space -- clearly enough!). Any other advice you can offer me?

    I found my answer in a previous thread on the Forum -- it worked for me.
    Here it is:
    41. Nov 8, 2011 6:50 AM (in response to stevedolan)
      Re: CS5.5 Download Assistant Error 101     
      Ok, the problem is solved! 
    Go to: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html.  This is the direct link that downloads any Adobe CS5.5 file without the help of the Adobe Download Assistant software.  Read and follow the instructs exactly on this site.  Very Important:  MAKE SURE TO SIGN IN or CREATE A FREE ADOBE ID IF YOU HAVEN'T ALREADY DONE SO.  If not, you will get a message saying "access denied" or "resume your download", and thus, preventing the connection.
    Once the files have downloaded (2 files in total), extract the files to your desktop. 
    Once the extraction process has been completed, click on the "Setup Bootstrapper Application" installer file in the extracted folder and that should manually open the Installation screen.  Just follow the installation instructions, and everything should work!  Good luck!

  • Error message - The product is unable to calibrate

    I have a problem with all-in-one HP MFP M 425dw.
    It has a problem with scanning and photocopying. Printing is OK.
    First time after turning up device and installing it I done a first test copy (before connecting to computer in any way) and I got a copy with straight lines across the page.I also got message: "The product is unable to calibrate. 
    Close the lid and remove paper from the document feeder or flatbad"
    With scanning was the same problem, after scanning it puts out a page with straight lines in colour -colour scanning was turned on.I uploaded a photo of scanned page and it is the same with photocopying (only in black since it is black-and-white printer. Straight scan lines
    On some forum I found out some manual considering calibration - I uploaded instructions in jpg.Calibration page1  Calibration page2
    After doing calibration by that manual I got the same mesage again:'The product is unable to calibrate. 
    Close the lid and remove paper from the document feeder or flatbad.'
    However after waiting for some time this did solve my problem, it started to copy and scan properly. The problem is that every time th device is restarted it has a poroble with scanning and photocopying, so  I have to do calibration process again.
    Because every time device gets turned off on power button or there is power outage, calibration problem appears again.
    Now I am not sure is there a problem with just this device like a factory error or not.
    Because I have two others HP M425 and they never did have this problem. Actually on one other device after restarting it, sometimes there's a same error message
    " The product is unable to calibrate...."
    But he copies and scans ok.

    I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari.  Obviously without a student password I cannot go any further.  If you can do the same, then clearly the problem is at the other end.  If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
    Ciao.

  • Error in the Data Transfer phase

    Dear all,
    During the Data Transfer phase, we get 117 errors.
    The error for each failed process is:
    Execution of program /1CADMC/OLC_500000000043327 failed, return code               3
    Message no. DMC_RT_MSG046
    RC = 3: Error writing the data
    I compared the table structures in source and target system, and they are the same.
    Therefore I suspect that something went wrong during the Data Selection phase.
    Does anyone else have this problem?

    Hi Nicolas,
    Error code 3 suggests that there was a problem writing data to the receiver system. This may happen due to various reasons (For example: No tablespace available in the target system). To be sure, please check the System Logs (SM21) and Error Logs (ST22).
    In oder to check if something went wrong during data selection, you may refer to the selection logs for the tables for which data transfer is aborted.
    In case you are not able to identify the issue, kindly open an OSS Message for faster resolution of the problem.
    Regards,
    Suman

  • HT201364 trying to download os x mavericks and i get an error saying "The product distribution file could not be verified. It may be damaged or was not signed." how do i fix this so i can update my new macbook pro?

    "The product distribution file could not be verified. It may be damaged or was not signed."
    please help! i want to update my computer!!!

    "Update your new MacBook Pro"?
    Well, if your MacBook Pro is new, it already has Mavericks installed and there is nothing to update.
    Go to the Menu Bar, and click the Apple logo.  Then click "About This Mac."  Does it show OS X 10.9 or 10.9.1?
    If so you are already running Mavericks.

  • 'error extracting the product installer'

    After my download completes it says "error extracting product installer (error 101) and that i should check my disc space, how can i fix this?? I have more than 500 GB of free disc space available.

    Troubleshoot Adobe Download Assistant
    And fitting the issue: If your disk is larger than 1TB, create a partition smaller than that.
    Mylenium

  • KD256 Error in the Production order settlement

    Hi,
    We have a production order where the material and labour cost has been posted.
    In period 9 the order has been settled and Partial delivery status has been set.
    In period 11 ( August), the material and labour cost has been incurred. The TECO status has been set on 01.10.2008 which is period 1 of 2009. This has also been reversed in period 12 ( Sept)
    When we were trying to do settlement in KO88, we get error message " KD 256: There is no accrual cost to be settled".
    - there are accruals in this Prod.Order.
    -  The solution says to do the accrual and settle...
    How do we do the accrual?
    How do we settle ?
    Please help,

    Hi Kumar,
    I did check the OSS notes.
    In this order, the TECO date on 01.10.2008
    Settlement period is for Sept'08
    PNCF status has been set on 27.09.2008
    If we test run settltment for the order in next period, its running correctly.
    The Order does not have any accruals and has WIP costs.
    Getting confused between the accrual and WIP. Does Accrual means that whatever cost incurred during the period of settlememt and WIP refers to the amount incurred in the previous period and for which WIP has been calculated ?
    If so , then the order has only WIP. Is there any way we can reverse the WIP of earlier periods and then redo the WIP,Variance and settlement?
    Thanks for help,

  • SAP Crystal Reports 2011: Error INS00140 The Product keycode is not valid

    I have followed all of the instructions in the previous thread but am still getting the error message.  I am trying to install on a Windows 7 machine.

    Try this Post...
    SAP Crystal Reports 2011: Error INS00140 and other install errors
    PS - Coy no longer works here
    Don

  • Have just made 2 attempts to download Elements 12.  Each time at the end it gives a message saying Error extracting the product installer (Error 101). Please check for available disk space.   I have an almost untouched hard drive.  This is definitely NOT

    Can anyone help me please

    here are two different links.  at least one must be different than the one you're currently trying.
    Downloads available:
    Suite:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    https://helpx.adobe.com/download-install.html
    Download and installation help for Adobe links
    https://helpx.adobe.com/download-install.htmlDownload and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    and activate with your serial number.
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • "The product distribution file could not be verified. It may be damaged or was not signed." error while downloading OS X Mountain Lion

    I paid for the Mountain Lion, was downloading perfect. When almost 1 gb of downloading was left then this error occured "The product distribution file could not be verified. It may be damaged or was not signed." and stopped downloading and now every time i try to download it this error occurs
    What should i do now, i paid for it and couldn't even download it now.

    You'll need to re-try the download.
    If you have a flaky network connection, or if you're behind a proxy server, there can be issues.
    The App Store knows you paid so you won't have a problem trying to re-download, but you will have to re-download.

  • Photoshop Elements 13: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.

    Installed Photoshop Elements 13 on old computer in December, old computer crashed this week so had to purchase new computer.  Attempted to install and received the following error message:  The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.  What now???

    Try Warning: "Adobe Genuine Software Validation Failure..." | Windows

Maybe you are looking for