Error:invalid central system in requet approval process(AE)
Hi,
In AE while approving the request, in final stage i am getting an error "invalid central system ".anyone please help me to know the solution for this?
You need to check whether the system for which you are doing the provisioning is a part of your CUA system. If not then Go to the
Configuration tab-> Workflow-> CUA System.
In the system change the value to the "-Select-". Then you will be able to create the request for your system.
Similar Messages
-
CUP 5.3 Error Message "Invalid Central system"
Hello Experts,
I'm currently testing a CUP approval process (simple user creation with one stage of approval) and having an error message that says "Invalid Central System". This message shows up on the top screen in red text when I logon and try to approve a user access request.
The intention is when I approve the request, the user will be created by auto-provisioning.
Does anyone have any clue to this message?
Thanks,
HMAnkur,
I was be able to solve the issue (with SAP NOTE 0001175967).
It was very simple. I just needed to change one parameter in CUP.
Thanks a lot!
HM -
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Error provisioning a resource with custom approval process
Hi,
While trying to provision a resource with custom approval process, I get the following error:
<May 11, 2012 8:07:18 AM IST> <Warning> <oracle.wsm.agent.handler.wls.WLSPropertyUtils> <BEA-000000> <WLSPropertyUtils:getOperationName(),operation name is null>
<May 11, 2012 8:07:18 AM IST> <Warning> <org.eclipse.persistence.session.oim> <BEA-000000> <
Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
Error Code: 12899
Call: UPDATE REQUEST_APPROVALS SET APPROVAL_STATUS = ? WHERE (REQUEST_APPROVALS_KEY = ?)
bind => [com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
parts: {{
summary=<summary>XPath query string returns zero node.
The assign activity of the to node query is returning zero node.
Either the to node data or the xpath query in the to node was invalid.
According to BPEL4WS spec 1.1 section 14.3, verify the to node value at line number 251 in the BPEL source.
</summary>}
, 6]
Query: UpdateObjectQuery(oracle.iam.request.vo.ApprovalData@11e00d4b)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:801)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:867)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:587)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:530)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:914)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:715)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:430)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1141)
at org.eclipse.persistence.queries.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:84)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:675)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:589)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:109)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:86)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2898)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1225)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1207)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1167)
at org.eclipse.persistence.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:233)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:108)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3260)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1413)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1518)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.writeChanges(UnitOfWorkImpl.java:5499)
at oracle.iam.request.repository.ApprovalRepository.updateApprovalInstanceWithOutcome(ApprovalRepository.java:84)
at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:111)
at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy351.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.updateApprovalResultx(ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.java:462)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy184.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyServiceDelegate.updateApprovalResult(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy350.updateApprovalResult(Unknown Source)
at oracle.iam.request.workflowcallback.ApprovalCallBack.completed(ApprovalCallBack.java:28)
at oracle.iam.platform.workflowservice.ws.CallbackServiceImpl.callback(CallbackServiceImpl.java:98)
at oracle.iam.platform.workflowservice.ws.wls.CallbackService.callback(CallbackService.java:33)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)
at javax.security.auth.Subject.doAs(Subject.java:337)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:208)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:310)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:223)
at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:124)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:205)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1040)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1379)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3568)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3694)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1508)
at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:172)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:792)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:867)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:587)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:530)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeCall(AbstractSession.java:914)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.updateObject(DatasourceCallQueryMechanism.java:715)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.updateObject(StatementQueryMechanism.java:430)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.updateObjectForWriteWithChangeSet(DatabaseQueryMechanism.java:1141)
at org.eclipse.persistence.queries.UpdateObjectQuery.executeCommitWithChangeSet(UpdateObjectQuery.java:84)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:675)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:589)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:109)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:86)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2898)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1225)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1207)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1167)
at org.eclipse.persistence.internal.sessions.CommitManager.commitChangedObjectsForClassWithChangeSet(CommitManager.java:233)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:108)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3260)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1413)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1518)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.writeChanges(UnitOfWorkImpl.java:5499)
at oracle.iam.request.repository.ApprovalRepository.updateApprovalInstanceWithOutcome(ApprovalRepository.java:84)
at oracle.iam.request.impl.ApprovalManager.approvalInstanceComplete(ApprovalManager.java:111)
at oracle.iam.request.impl.ApprovalPolicyServiceImpl.updateApprovalResult(ApprovalPolicyServiceImpl.java:52)
at oracle.iam.request.api.ApprovalPolicyServiceEJB.updateApprovalResultx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy351.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.updateApprovalResultx(ApprovalPolicyService_1nib43_ApprovalPolicyServiceRemoteImpl.java:462)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
at $Proxy184.updateApprovalResultx(Unknown Source)
at oracle.iam.request.api.ApprovalPolicyServiceDelegate.updateApprovalResult(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy350.updateApprovalResult(Unknown Source)
at oracle.iam.request.workflowcallback.ApprovalCallBack.completed(ApprovalCallBack.java:28)
at oracle.iam.platform.workflowservice.ws.CallbackServiceImpl.callback(CallbackServiceImpl.java:98)
at oracle.iam.platform.workflowservice.ws.wls.CallbackService.callback(CallbackService.java:33)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)
at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)
at javax.security.auth.Subject.doAs(Subject.java:337)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:208)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:310)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:223)
at weblogic.wsee.jaxws.JAXWSServlet.doPost(JAXWSServlet.java:124)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at weblogic.wsee.jaxws.JAXWSServlet.service(JAXWSServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<May 11, 2012 8:07:18 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050200> <Failed to create the request in the repository.>
<May 11, 2012 8:07:18 AM IST> <Error> <oracle.iam.request.impl> <IAM-2050050> <Exception thrown Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
Error Code: 12899
Call: UPDATE REQUEST_APPROVALS SET APPROVAL_STATUS = ? WHERE (REQUEST_APPROVALS_KEY = ?)
bind => [com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
parts: {{
summary=<summary>XPath query string returns zero node.
The assign activity of the to node query is returning zero node.
Either the to node data or the xpath query in the to node was invalid.
According to BPEL4WS spec 1.1 section 14.3, verify the to node value at line number 251 in the BPEL source.
</summary>}
, 6]
Any idea how to resolve this ??
Thanks,Based on the error trace
Caused By: java.sql.SQLException: ORA-12899: value too large for column "DEV_OIM"."REQUEST_APPROVALS"."APPROVAL_STATUS" (actual: 442, maximum: 32)
you are inserting a value too large for REQUEST_APPROVALS.APPROVAL_STATUS column. It should contain values like COMPLETED, approved, rejected etc... Check your custom approval process again.
Regards
user12841694 -
what settings do I need to have to access Ashford University's student portal using either Safari or Firefox when I get the following message: The system is unable to process your response at this time. If you feel you have received this message in error. Please contact your System Administrator, or try again at a later time.
I am able to get to the Ashford University login display with no difficulties with both Firefox and Safari. Obviously without a student password I cannot go any further. If you can do the same, then clearly the problem is at the other end. If that is the same case with you, then there is no advice that I can give you but to stir the pot as best you can.
Ciao. -
"Central system not accessible" when registering external candidate !!
Hi,
When registering an external candidate via candidate registration link we get an error as " Central system niet bereikt ( This is translation of "Central system does not reach " in Dutch language ). This issue is for only ONE language NL (Dutch) and working fine for other languages.
The SICF service HRRCF_CAND_REG is displayed correctly in all languages . But when an external candidate goes to register itself, he gets such an error message. The recent installation of Dutch language was done correclty.
Please help ,as what could be the possible reason.
Thanks
ShubhamHi Shubham,
Did you add Dutch language in this parameter zcsa/installed_languages in RZ10 ?
Thanks
Sunny -
ERROR MESSAGE sap system manager:work process restarted, session terminated
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi
follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i> -
OIM: Error while deploying Custom Approval Process for Self-Register
While deploying the Custom Approval Process for Self-Register, i am getting the following error in scac.log file
Nov 16, 2011 2:48:58 PM oracle.fabric.common.wsdl.SchemaManager isIncrementalBuildSupported
INFO: XMLSchema incremental build enabled.
Nov 16, 2011 2:48:58 PM com.collaxa.cube.CubeLogger info
INFO: validating "ApprovalProcess.bpel" ...
oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
at oracle.integration.platform.blocks.WLSPlatformConfigurationProvider.<clinit>(WLSPlatformConfigurationProvider.java:44)
at oracle.integration.platform.blocks.FabricConfigManager.<clinit>(FabricConfigManager.java:155)
at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXpathFunctions(FabricXPathFunctionResolver.java:271)
at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.loadXPathConfigFile(FabricXPathFunctionResolver.java:153)
at oracle.integration.platform.blocks.xpath.FabricXPathFunctionResolver.init(FabricXPathFunctionResolver.java:51)
at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.loadFabricXpathFunctions(BPELXPathFunctionNameResolver.java:57)
at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<init>(BPELXPathFunctionNameResolver.java:48)
at com.collaxa.cube.xml.xpath.BPELXPathFunctionNameResolver.<clinit>(BPELXPathFunctionNameResolver.java:44)
at com.collaxa.cube.lang.compiler.bpel.XPathExprValidatorVisitor.<init>(XPathExprValidatorVisitor.java:122)
at com.collaxa.cube.lang.compiler.bpel.AssignValidator.<init>(AssignValidator.java:89)
at com.collaxa.cube.lang.compiler.bpel.BpelParser.<init>(BpelParser.java:452)
at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:60)
at com.collaxa.cube.lang.compiler.BPEL1Processor.validate(BPEL1Processor.java:329)
at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:153)
at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)
at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)
at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1117)
at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:500)
at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Nov 16, 2011 2:49:00 PM CubeProcessGenerator compile
WARNING: classpath is: D:\JDev11g\Middleware\jdeveloper\jdev\extensions\oracle.sca.modeler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.mediator_11.1.1\mediator_client.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.mds_11.1.1\mdsrt.jar;D:\OIMPS1\Middleware\oracle_common\modules\oracle.jps_11.1.1\jps-manifest.jar;;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\gen-classes;D:\OIMPS1\Middleware\Oracle_IDM1\server\workflows\new-workflow\process-template\SelfRegistrationApprovalApp\SelfRegistrationApproval\SCA-INF\lib\oimclient.jar;D:\JDev11g\Middleware\oracle_common\modules\commonj.sdo_2.1.0.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;D:\JDev11g\Middleware\oracle_common\modules\oracle.xdk_11.1.0\xmlparserv2.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel1-1-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-common.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpel_coherence_config.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\bpm-analytics.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\wsif-binding.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel-validator.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\monitor-rt-xbean.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\oracle.soa.bpmn.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\user-patch.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.thirdparty.jar;D:\JDev11g\Middleware\jdeveloper\uddi\lib\oracle.soa.uddi.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\bpm-infra.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-ext.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-scheduler.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\xmlunit-1.1.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tools.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-xpath-exts.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle-soa-client-api.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-client.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-was.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime-ext-wls.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\oracle.soa.fabric.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar;D:\JDev11g\Middleware\jdeveloper\soa\modules\oracle.soa.ext_11.1.1\classes
In scac_out.xml file following is the error message
<Fault>
<severity>error</severity>
<loc>/ns:composite</loc>
<line/>
<col/>
<file/>
<msg>
<![CDATA[SCAC-50012]]>
</msg>
</Fault>Hi,
I have run into the same problem with SOA 11.1.1.5 version. In my case after fixing the following two errors it seems to work fine.
If you have followed the guide, there must be some errors:
First the java code if copied then contains an extra enter value:
Instead of:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization
Administrator");"
Use the following:
"try {
System.out.println("Prototype for invoking an OIM API from a SOA Composite");
System.out.println("RTM Usecase: Self Registration Approval by Organization Administrator");"
The other error is that you should not use <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-manifest.jar, but the <BEAHOME>/oracle_common/modules/oracle.jps_11.1.1/jps-api.jar in jdeveloper. After these the deployment to the application server works fine for me. -
ERROR:Could not read archive file - during Processing Base System Part 2
Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b -
Hi All,
I am a new bie to OIM 11g. I have developed a custom (single level parallel) approval composite and it is working fine.
According to my new requirement I need to add two serial approval blocks before the parallel approval block. On the whole the approval process contains 3 levels of approvals with the third level as a parallel approval block.
The 1st level approval will be a default approval and by default all the requests should be routed to this level.
Based on a condition(Create/update/delete user) the request should be routed to 2nd and 3rd level approval.
In one of the scenario(condition) the requests are routed to 1st, 2nd,3rd level. In an other scenario the requests are routed to 1st and 3rd level approval. In both the above mentioned scenarios the request is successfully completed.
In the last scenario(where condition for 2nd and 3rd level fail) the request will be routed only to the 1st level approval and not to the other two levels. In this scenario I am getting the following error and the request is failing.
WLSPropertyUtils:getOperationName(),operation name is null
Invalid outcome COMPLETED received from SOA for the request id 3058.
[CALLBACKMSG] Inside Status Change plugin for request 3058 and the status is : Request Failed.
[CALLBACKMSG] Inside Status Change plugin for request 3058, target tye is Resource and operation is MODIFYRESOURCE.
[CALLBACKMSG] Inside Status Change plugin for request 3058, target tye is Resource and operation is MODIFYRESOURCE.
An attempt was made to look up non-versioned
global resource "queue" from an application version "oim [Version=11.1.1.3.0]". This can potentially cause conflict of the global resource usages among multiple application versions.
WLSPropertyUtils:getOperationName(),operation name is null
Please let me know if I am going wrong any where or Please suggest what needs to done to resolve this issue.
Thanks in advance for the help.
Thanks,
PTHi All,
Thanks a lot for your help.
All the above mentioned mappings are proper.
When I remove a parallel approval block present in the last level and place a single serial approval block(instead of parallel approval) , I am not getting an exception and the request is completed. But according to my requirement I sholud have a parallel block in the last approval level.
Can some body please help me in resolving this issue.
Thanks,
PT -
Netweaver 04s MSS Central System Step 16 Error
Hi,
I'm trying to install a Netweaver 04s IDES system. I'm at the Import ABAP step in the process. The sapinst log is as follows:
===========================================================
INFO 2007-05-09 16:58:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.10.xml'.
INFO 2007-05-09 16:58:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/inifile.11.xml'.
INFO 2007-05-09 16:58:04
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-05-09 16:58:15
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS/keydb.6.xml'.
INFO 2007-05-09 16:58:15
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
INFO 2007-05-09 16:58:30
Switched to user: ugsadm.
INFO 2007-05-09 16:58:30
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\import_monitor.java.log.
INFO 2007-05-09 16:58:30
Switched to user: ugsadm.
ERROR 2007-05-09 16:58:30
FSL-06002 Error 3 (The system cannot find the path specified.
) in execution of a 'CreateProcess' function, line (310), with parameter (F:\j2sdk1.4.2_14\bin\java.exe ...).
INFO 2007-05-09 16:58:30
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS.
ERROR 2007-05-09 16:58:30
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-05-09 16:58:30
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-05-09 17:11:27
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
===========================================================
For the first error above ...
ERROR 2007-05-09 16:58:30
FSL-06002 Error 3 (The system cannot find the path specified.
) in execution of a 'CreateProcess' function, line (310), with parameter (F:\j2sdk1.4.2_14\bin\java.exe ...).
I know that the path to the java sdk is correct so I assume that the install program is looking for another file (xml?) to create the process from.
So, I have three questions ...
1. Is this info kept in either of the 3 xml files (infile.xml, keydb.xml, instanatemp.xml)?
2. Are these files built from a master that I can change?
3. Is there a way to go back to the Check Parameters step to fix this problem?
Thanks in advance for any help ... points will be awarded, of course!
Sincerely,
Rod Wagoner
Tucson, AZ USAI'm sorry, this was confusing ....
Yes, I'm installing SOLMAN. This is the first time through the install for me.
I'll check on the .14 version of the JDK.
Can I modify infile.xml or instatemp.xml directly?
Thanks,
Rod -
Approval process - 'System Validation' - Pending - Assigned to xelsysadm
I created an approval process for a resource.
Whenever a request for a resource is generated for a user, the approval request is sent to a group based on user's location.
Steps:
-I created an approval process in which I added a task which sends the request to the appropriate group.
-An adapter is attached to this task which determines the group to which request is to be sent.
-I have added tcComplete adapter to the Standard Approval
However, after the request is approved by the approver(belonging to the above mentioned group), the resource does not get provisioned and the system validation is shown 'pending' - assigned to user 'xelsysadm'.
I am not able to figure out why the system validation is 'pending' and going to 'xelsysadm'.
Note that I am logged in as xelsysadm and the above pending 'system validation' task is present under 'Open Tasks' under 'To-Do-List'. Once I set the response from there as 'Complete', the resource is provisioned.I tried provisioning another user, got the oim api error again:
INFO,18 May 2010 13:28:36,925,[XELLERATE.WEBAPP],Key not found in Custom Resource Bundle: newKey = GC.GCPROV.ADAPTER_OIMAPIERROR
DEBUG,18 May 2010 13:28:36,925,[XELLERATE.WEBAPP],Setting the response code as OIM API Error -
Dear all,
when i submit the approval process i got this error....
"System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator. "
what can i do to solve this problem.Dear vanissmca,
This is quite an old post, has the issue since been resolved? If not what version/SP level are you on?
Regards,
Lorcan. -
[INVALID] [pacman] error: call to waitpid failed (No child process)
Hi.
First of all I apologize for very unclear topic name but this problem clutter me.
Description:
I use Archlinux x86_64 on my several machines: two laptops and desktop. On desktop and one laptop I update system regularly and also use my custom builds of git, bzr, emacs, rxvt, tmux and others.
Preliminary:
After Sat update (2010-04-24) on my desktop I noticed that compiled Emacs (source taken from bzr repo) crashed just after start. I found the cause of error: new gcc (4.5.0) has broken '-O2' option (actually broken '-foptimize-sibling-calls' but accidentally '-O3' option works). Besides this annoyance my desktop system works fine.
Main problem:
But on my laptop (on which I traced down the problem with compiled Emacs) I faced with strange problems (I report about them only now because I didn't have time before).
When I run 'sudo pacman -Su' to update my laptop system I sometimes see
error: call to waitpid failed (No child process)
I figured out that this message comes only if 'chrooting' is performed (pacman --debug).
Also when I try to update local git repositories using 'git pull' I get the same error:
error: waitpid for git-pull failed: No child process
and the same for 'gc', 'rev-list', 'git-remote-http'. (I checked with newly compiled binary and distro's binary).
Even simple python script 'sample.py' fails to run:
#!/usr/bin/env python
import os,string
target = "sample.py"
f = os.popen('file "%s" 2> /dev/null' % target)
output = string.strip(f.read())
rc = f.close()
if not output or rc:
print("Some error occurs")
else:
print("Result %s" % output)
If I run it I get
IOError: [Errno 10] No child process
Except these error messages my laptop system works without noticeable errors.
Could someone help me trace down the problem?
P.S. I use zen kernel on this laptop (AUR: kernel26zen-git, stable) but I also checked this behavior on default kernel.
EDIT:
Sorry. My fault. Seems that this error is triggered by tmux . I tried git in sakura and didn't see any error messages.
Sorry for the noise.
EDIT2:
For those who are interested in solution for this problem with tmux I found a thread about this behavior on sourceforge.net:
http://sourceforge.net/mailarchive/foru … tmux-users
Last edited by lomov_vl (2010-04-30 06:56:22)Hi, I found SAP note 1828028 - DBCON connection to remote HANA database cannot be established
whic has below resolution:
1
Error code
Reason
***LOG BY0=> invalid username or password: [dbds 879]
Invalid username/password maintained in connection parameters (to be edited via transaction DBCO)
2)Hint: As the database connection between the SLT and the HANA system is based on DBCONNECT, you can also use report ADBC_TEST_CONNECTION in transaction SE38 for testing. SAP Note 1750722 describes this in detail.
But our problem is SAP system is not up to run these solutions in GUI.
Can someone help / provide SAP doc link for how to update DBCON at OS or HANA db level.
Thank You -
Error during approval Process flow in Process controlled workflow
Hello Experts,
We are in SRM 7.0 classic scenario using Process controlled workflow.WE recently connected a new backend R/3 system to our SRM system i.e we now have 2 R/3 backend system connected to SRM system
It is regarding the two new additional account assignment categories that came into picture when we connected the new R/3 backend system to our SRM system, i.e. Asset and Network.
There seems to be some problem with the approval workflow for those SHC, that have such Acc *** Cats.
Please find below my obeservations:
- if you have just one line item in the SHC, and this item is either booked on Asset or on Network, than everything goes fine. After the Acc *** approval, the PR is created in R/3
- if you have SC with a mix between an "old" Acc *** Cat (Cost Centre, WBS and Order) and one of the "new" Acc *** Cats, than the workflow is not working as required --- the manager, that is responsible for the accounting approval of the two positions (e.g Cost Centre and Asset) gets only one work item in his approval overview --- in that work item, the two positions are there, but the Asset one is grayed out --- so, the Manager approves only the Cost Centre positions and than the SC is no longer with the approver --- if you observe the SC now from the requisitioner point of view, the status of the line items in the approval process overview of both(!) lines is "approved", but the overall status of the SC is still "in approval"
Can you all experts plz let us know why this is happening and how this can be resolved?
Any pointers will be highly appreciated.
Thanks & Regards,
RKSHi,
What is Resp. Resolver Name and Decision Type in your Process Level Definition? Did you create custom agent BADI implementation?
Regards,
Masa
Maybe you are looking for
-
Apps I would like to see! and Flash please!
I know Flash is coming to web os and I am super excited as I hope to play farmville on my palm! But...They should make an app for farmville like they do on the iphone. I am wondering if using flash is going to end up consuming much more data than an
-
Duplicate data updating in Oracle DB by JDBC adapter
Hi , I am developed Idoc to JDBC senario. One sigments was coming N number of times. for example 30 time. In that 3 diffrent disribution channel data. but I want to send only 3 records for each distribution channel. I connected that segment to access
-
When I run Disk firstaid I get warnings
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired. Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired. Warning
-
Need help PLLLLEEEAAASSSEEEE... Driving me NUTS!
Hi All, So here's my story... Just got the BB Curve 8530.. Carrier is Sprint.. I am by no means new to Blackberry... But I am absolutely stumped and cannot figure this one out... There are about 10 contacts on my phone that have custom ringtones that
-
When the power button is pressed, the fans spin up for about 1-2 seconds and the optical drive starts to initialize, then they both stop and nothing else happens. The hardrive does not appear to be starting. I have tried to start up in target mode bu