Error logs message " HTTP3090: Failed to create logging thread " ?

hi, i need your help.
i have "sjs web6.1sp8" on hp-ux machine
below message suddenly appear at load testing.
[Jul/2010:03:01:52] failure ( 6477): HTTP3090: Failed to create logging thread (Insufficient resources)
[Jul/2010:03:04:53] failure ( 6477): Error creating DaemonSession thread
what's mean message? how do action?
thank for rep..
Edited by: swardseven on Aug 1, 2010 10:38 PM

First - 6.1sp8 is old. Very old. You should be testing with the latest SP of 6.1 if at all possible.
Second - According to the error the process is somehow resource constrained. Are you out of RAM? Swap? Is the process out of file descriptors? Some other resource? Check your OS limits and per-process limits and compare them to the Web Server consumption.

Similar Messages

Failed to Create Logging Thread

I'm getting an error in my iplanet 6.0 error log that reads
failure ( 7951): Failed to create logging thread (Insufficient
resources)
This is on an HP-UX 11.0 system
I'm not sure what parameter I need to increase. Is it a Kernal param on
the HP system or is it a param within the iplanet webserver.
Has anyone seen this or know how to resolve???

Did you ever get a response or figure this out. I getting the same problem. I think it is a resource issue on my server

Populating our log message along with standard sap log in ck11n.

Hi all,
I have developed a user exit which is used in costing of material using ck11n.
Here i have to show our custom log message along with the standard log shown by standard sap system after costing run is complete.
I got one FM-- CM_F_MESSAGE which is used by SAP. But i want the message along with SAP messages and not separately.
Can u help me out for this. its very urgent.
Thanks in advance.

Hi
I'm not sure because I don't know that trx, but I seem the function group of that function manages a log, so you can try.
This is an extract of abap code of SAPLCKDI where that fm is used:
CALL FUNCTION 'CM_F_MESSAGE'
   EXPORTING
     ARBGB = Y_CMF-CK
     MSGNR = '327'
     MSGTY = Y_CMF-W
     MSGV1 = SICHT
     MSGV2 = KLVAR.
So I suppose you should call it by this way:
CALL FUNCTION 'CM_F_MESSAGE'
   EXPORTING
     ARBGB = <your message class>
     MSGNR = <message number>
     MSGTY = <message type>
     MSGV1 = <text 1>
     MSGV2 = <text 2>
     MSGV3 = <text 3>
I think MSGV* is optional parameter.
Max

Cisco Unified Provisioning Manager - Error IPT-0600: Software - Failed to create subscriber

Hi,
When I create voice mail boxs for users I recieve the following error:
IPT-0600: Software - Failed to create subscriber xxxxxxx | Cause - org.apache.axis2.AxisFault: com.cisco.unity.cuals.CuDbException: Duplicate extension in partition: ObjectName = [EmbeddedKey=CustomType.O.
These are new users and the issue only started occuring today. I'm using CUPM version 2.1 and unity conenction Version 7.0.
Any help would be appreciated.
Thanks
Mike

Ok,
located the issue. A previous user with the same extension number still existed on the unity server. Not sure how this missed the deletion process.
Cheers
Mike

Error When Starting VM Failed to create memory contents file

Hi,
I"m experiencing issue with a VM that has previsoulsy been snapshotted. The snap shots have been since deleted via the Hyper V Manager. The snap shots were not applied to the VM. Also no .avhd files have been deleted via Windows Explorer
When I start the VM I get the following error message.
[Window Title]
Hyper-V Manager
[Main Instruction]
An error occurred while attempting to change the state of virtual machine MyVirtualMachine.
[Content]
'MyVirtualMachine' failed to initialize.
Failed to create memory contents file 'D:\Virtual Machines\MyVirtualMachine\MyVirtualMachine\MyVirtualMachine\Virtual Machines\25AB3A86-2950-457A-8D54-9B313E2D575E\25AB3A86-2950-457A-8D54-9B313E2D575E.bin' of size 4096 MB.
[Expanded Information]
'MyVirtualMachine' failed to initialize. (Virtual machine 25AB3A86-2950-457A-8D54-9B313E2D575E)
'MyVirtualMachine' failed to create memory contents file 'D:\Virtual Machines\MyVirtualMachine\MyVirtualMachine\MyVirtualMachine\Virtual Machines\25AB3A86-2950-457A-8D54-9B313E2D575E\25AB3A86-2950-457A-8D54-9B313E2D575E.bin' of size 4096 MB. (Virtual machine
25AB3A86-2950-457A-8D54-9B313E2D575E)
[V] See details [Close]
Suggestions Welcomed,
Thanks Adam

Hi,
Please check whether you receive these error logs: Event ID 3130, 3131, 3320 or 3321.
Check the environment in which the start virtual machine operation was being attempted, including:
access and permissions to the configuration file, memory file and all image files
prior error messages in the event log
available RAM on the system
configuration settings
disk space for the memory file and any expanding virtual hard disks
Once the necessary issues have been rectified, try to start the virtual machine again.
If the problem continues, restart the VMMS Service.
To restart the VMMS service using the command prompt:
1. On the computer that has the stopped service, open a command prompt as local administrator and type the following:
net stop nvpswmi
If the service is not running, you will see the error "The Hyper-V Networking Management service is not started."
3. On the command prompt type the following command to start the nvpswmi service
net start nvspwmi
If the service start starts you will see the message "The Hyper-V Networking Management service was start successfully."
To restart VMMS using PowerShell:
1. On the computer that has the stopped service, open a command prompt as local administrator and type the following:
C:\PS>restart-service vmms
For more information please refer to following MS articles:
Event ID 3130 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd582385(v=ws.10).aspx
Event ID 3131 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd582367(v=ws.10).aspx
Event ID 3320 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd582317(v=ws.10).aspx
Event ID 3321 — Virtual Machine Start Operation
http://technet.microsoft.com/en-us/library/dd581892(v=ws.10).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

FND LOG messages are not printing in LOG file for Concurrent program

Hi,
I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');
Thanks.

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Log aborts, with Failed to open log file error

Flash Media server version 2.0.3 periodically fails to open
the log file and aborts logging. This seems to occur post log file
roll time as it occurs at c.01:50. Does anyone else have a similar
issue ?
I am running Falsh Media Server on windows 2003 server SE!
Any help would be much appreciated.

Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

GWcheck errors for messages that failed to archive

There are numerous errors in the GWCheck logs for messages failed to
archive for one user. The cause is usually insufficient disk space in the
archive path. I moved his archive folder to a place with more disk space
sometime last year. It seems that the messages that were unable to archive
at the time are lost in limbo. They are no longer in the user's inbox and
are not in the archive. I spoke with the user and he stated that the
messages are no longer important.
The errors in gwcheck look like this:
Error 83- Item failed to archive
- Subject: Fwd: Dayton VA emergency renovation
- From: John Hall
- Date: Nov 6, 2009 - 1:47 pm
- First archive attempt date: Jul 25, 2011
- Number of archive attempts: 1
- Error number on last Archive attempt: 0x8204
9938 ITEM_RECORD check
Error 83- Item failed to archive
- Subject: Fwd: Building 700 Elevator and Building 701 Demoliton Facade/
Canopy Work
- From: John Hall
- Date: Jan 6, 2010 - 1:29 pm
- First archive attempt date: Jul 25, 2011
- Number of archive attempts: 1
- Error number on last Archive attempt: 0x8204
10585 ITEM_RECORD check
....ETC...
I found TID 7009495 that states the following:
Resolution
WARNING: THE FOLLOWING RESOLUTION WILL DELETE MAIL
GroupWise POA code level minimum must be 7.0.4 or 8.0.2HP2.
Run the following options on one or more users before running it against
an entire post office.
1) Run a standard expire reduce that covers the dates of these items and
verify that they are not purged (because of the outstanding archive
failure)
2) Add the IGNOREARCHIVEFAILURE option on the MISC tab of GWCheck and run
the same expire reduce again.
3) The new option should allow the items to be purged.
Additional Information
The most common reasons that the GroupWise items failed to auto-archive is
either because the archive disk filled up or there was a disruption in
communication to a remote archive store.
....QUESTION...
Will this only "delete" the failed to archive messages or will it affect
any messages for that user during those dates? I don't want to
accidentally delete any messages that need to be kept. I just want to
clear the messages that have failed.
Sorry for the long message. Thank you for your help.

In article <MQfOs.2116$[email protected]>, RSharp wrote:
> Error 83- Item failed to archive
> - Subject: Fwd: Dayton VA emergency renovation
> - From: John Hall
> - Date: Nov 6, 2009 - 1:47 pm
> - First archive attempt date: Jul 25, 2011
> - Number of archive attempts: 1
> - Error number on last Archive attempt: 0x8204
> 9938 ITEM_RECORD check
> Error 83- Item failed to archive
> - Subject: Fwd: Building 700 Elevator and Building 701 Demoliton Facade/
> Canopy Work
> - From: John Hall
> - Date: Jan 6, 2010 - 1:29 pm
> - First archive attempt date: Jul 25, 2011
> - Number of archive attempts: 1
> - Error number on last Archive attempt: 0x8204
> 10585 ITEM_RECORD check
>
That looks like they are from the GWCheck done July 25th, 2011. Are the
same messages still showing up in current contents check?
Do you run a regular purge only expire reduce? If not, run one soon, and
check those logs for any instance of errors purging. An expire of old
trashbin is also a worthwhile expire reduce job to run as part of this.
I'm assuming by your concern that these users have messages and such from
that time frame and earlier that they want to keep, hence making that TID
sound very suspicious for your purpose. If that assumption is invalid,
then that TID should be just fine for you, just be careful of your # of
days you pick.
GWAVA's Retain has hit similar issues and therefor has the tools built in,
but then this is a tool that archives without removing mail from the
primary storage. One client of mine still deletes mail over 999 days from
GroupWise itself just to retain efficient operations, relying on Retain
for anything older. That link supplied for next steps if my assumption
was correct.
http://support2.gwava.com/kb/?View=entry&EntryID=379
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Oracle 10g impdp log didn't catch failed to create FK?

Hi,
We try to use 10g impdp, the speed was impressive, but we found an issue here:
We found some missing FKs after impdp, since all the missing FK point to other schedma which not exist in current instant.
Here is an example:
ALTER TABLE HR.EMP ADD (
CONSTRAINT SGI_FRM_FK
FOREIGN KEY (DEPT.ID)
REFERENCES FINA.DEPT(DEPT_ID));
in this example, this FK owner by HR but reference to other schema FINA,
but FINA doesn't exist in current instant.
I was surprise impdp.log file didn't catch any error message to fail to create these FKs, have anyone has similar issue?
Thanks

I can not seem to find any object named PROCOBJ.
As for the object called RAYSQLACCESS9889405...no idea what this is.
I checked the source for any invalid objects and none.

Error stopping and undeploying java applications and View Log Messages link

I was redirecting to this forum by instant chat JCS Support.
Have a few issues with my JCS account:
1) I am getting the following error when clicking View Log Messages hyperlink - Failed to get messages for service - java.
2) Have 2 applications: Branding and Connectivity which I tried to stop or undeploy and getting errors for both.
Could you help to resolve the both issues?

Sorry, it was unfortunate that C2C could not help you. We had an issue last week with our console. Its now fixed, and you should not see this issue anymore. If you do continue to see an issue, post here and I will investigate.

SmartView 11.1.2.1 Operation Failed. Check Log for Details

Hello,
We recently upgraded to 11.1.2.1 and are having several users getting an error message when submitting data to HFM via Smartview. The error says _"Operation failed. Check log for details"_. The odd part is that they said the data is still uploading to the DB correctly. I have two quick questions:
1) Where can I go to check the logs for details?
2) Outside of seeing the error log does anyone know what causes this?
Thank you in advance,
Jason

Which version of SV, excel, IE you are on?
HTH-
Jasmine.

HOE TO STORE LOG MESSAGE IN TO FLAT FILE

Hi all,
In <b>Session Method</b> I want to store all the message from session log to flat file ......
Please help me in this regard...
Thanks in advance
Sandeep

these are all FM related to application log.
BAL_CNTL_CREATE     Create Control for log display
BAL_CNTL_FREE     Release Control
BAL_CNTL_REFRESH     Put new data in log display
BAL_DB_DELETE     Delete logs from the database
BAL_DB_DEQUEUE     Unlock log
BAL_DB_ENQUEUE     Lock log
BAL_DB_LOAD     Load logs from the database
BAL_DB_LOAD     Load log(s)
BAL_DB_SAVE     Save logs in the database
BAL_DB_SAVE     Save log(s)
BAL_DB_SAVE_PREPARE     Prepare save
BAL_DB_SEARCH     Find logs in the database
BAL_DSP_LOG_DISPLAY     Display messages in memory
BAL_DSP_LOG_DISPLAY     Display Log
BAL_DSP_LOG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA     Output all log header data
BAL_DSP_MSG_LONGTEXT     Display message long text
BAL_DSP_MSG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA     Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE     End output
BAL_DSP_OUTPUT_INIT     Initialize output
BAL_DSP_OUTPUT_SET_DATA     Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET     Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET     Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET     Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET     Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET     Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET     Assign authorization
BAL_GLB_AUTHORIZATION_RESET     Reset authorization
BAL_GLB_CONFIG_GET     Read configuration
BAL_GLB_CONFIG_SET     Set configuration
BAL_GLB_MEMORY_EXPORT     Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT     Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH     (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH     (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET     Get current message handle
BAL_GLB_MSG_DEFAULTS_GET     Get message defaults
BAL_GLB_SEARCH_LOG     Find logs in memory
BAL_GLB_SEARCH_MSG     Find messages in memory
BAL_LOG_CREATE     Create log with header data
BAL_LOG_CREATE     Create log with header data
BAL_LOG_DELETE     Delete log (from database also at Save)
BAL_LOG_EXIST     Check existence of a log in memory
BAL_LOG_HDR_CHANGE     Change log header
BAL_LOG_HDR_CHECK     Check log header data for consistency
BAL_LOG_HDR_READ     Read log header and other data
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHECK     Check message data for consistency
BAL_LOG_MSG_CUMULATE     Add message cumulated
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_EXIST     Check existence of a message in memory
BAL_LOG_MSG_READ     Read message and other data
BAL_LOG_MSG_REPLACE     Replace last message
BAL_LOG_REFRESH     Delete log from memory
BAL_LOG_REFRESH     Delete log from memory
BAL_MSG_DISPLAY_ABAP     Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT     Read Application Log objects table record
BAL_OBJECT_SUBOBJECT     Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT     Read subobject table record
BP_EVENT_RAISE
hope this will help you....

Cisco Bars - Web Error : Failed to create ASP object

I have installed ;
Win2003
framework ASP .net2
IIS
MSDE 2000 serveur
Cisco BARS Version 4.0.12
When I go to http://IP/BARS
It ask for password, then I see the usual interface, but then I go and choose a backup option and I allways have this error
Windows Internet explorer
Failed to create ASP Object for : _RemoteScripts/rs_BARSconfig.asp
Firefox show that error :
Error:
Cannot locate proxy which supports Remote Scripting.
Was RSEnableRemoteScripting method invoked?
Second popup :
Failed to create ASP object for : _RemoteScripts/rs_BARSconfig.asp

thanks a lot, it fix my problem verry well.
Another little one :)
have any idea of this one here ?
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Timestamp: Sat, 4 Jul 2009 03:06:10 UTC
Message: Object doesn't support this property or method
Line: 269
Char: 3
Code: 0
URI: http://localhost/BARS/_ScriptLibrary/rs.htm
Message: 'rsConfig' is null or not an object
Line: 199
Char: 3
Code: 0
URI: http://localhost/BARS/BARSserverConfig.asp

Log messages for 'auditing' are different in 'general' and'application log

Hi,
From UI, When I audit a file using a profile which comprises of user-defined 'rules/categories/analyzers', I will get log messages at ''File-name(Application) log window' and 'Messages' log window, which are located at bottom of Jdev UI page. One common message in both the log windows is
" <n1> violations, <n2> exceptions, <n3> documents, <n4> seconds>.
But here the 'n1,n2,...' numbers are dfferent in two windows though the log output is for a same file. In this the 'file-name' log shows the correct
Example:-
In 'file-name' log window ,it shows as:
3 documents, 8 violations, no exceptions
In messages window, it shows as
"Audit starting on EFC.jpr (Default)
Audit completed: no violations, no exceptions, 3 documents, 1 second"
If I use the 'pre-existed'(Jdev's) rules profile, I will get similar output in both log windows.
From this I concluded that there is something missing to register for a new 'rule/category/analyzer'.
Could you suggest me in this case. Do I forgot anything to do in any files of '<rule-implementation.java>', 'audit.properties', <add-in launcher>.java, extension.xml.
Actually, I want to use 'ojaudit' executable from command line to my project files. Here I observed that the output of the 'ojaudit' is similar to the above explained 'Message' log window in JDeveloper UI. But where the 'Message' log window output is not correct for user-defined rules.
Regards
Madhu

Romano,
In the upcoming production release (planned to be released next week), we added caching of authorized roles and permissions in JhsAuthorizationProxy class.
I suggest you wait for this relase, if the problem persists, it is most likely an ADF issue (as is the logging)
Steven Davelaar,
JHeadstart team.

Sun logs: /var/adm/messages vs. /var/svc/log/*

On Solaris 10, is /var/adm/messages still the "gold standard" for startup and shutdown log messages, or have the critical logs moved to /var/svc/log/$service_name?
It's not like I can't look in one or the other, but I'm trying to gauge the relative importance of the two.
Is there another location that I'm overlooking?

aaron.m wrote:
On Solaris 10, is /var/adm/messages still the "gold standard" for startup and shutdown log messages, or have the critical logs moved to /var/svc/log/$service_name?Depends on what you mean by "startup" messages. There are two types I can think of.
During boot the kernel might generate a few messages about drivers and buffers and stuff. This is stored in a kernel buffer that is visible when you type 'dmesg'. When syslog starts up, it dumps the contents into the messages file so you have a static copy. I don't think this behavior changes between Solaris 9 and Solaris 10.
For the actual startup "scripts" (SMF, /etc/init.d, /etc/rc?), Solaris 9 and earlier didn't have any sort of capture location. It was common for scripts to print to STDOUT/STDERR, and that would be delivered to the console only. Since many of the scripts are running before filesystems are mounted read/write, it didn't try to save the output.
Now with SMF, it does more work to capture that output and you can find that in the service log files that you mention.
So none of the logs have really moved, but you now have more logs than you did before.
Darren

Error logs message " HTTP3090: Failed to create logging thread " ?

Similar Messages

Maybe you are looking for