Error message pointing to an unavailable AS line #
Hi,
The error message I'm getting suggests the culprit might be on line #235. I have no such line number anywhere. But I have to admit, I have two Actions layers on my main timeline. Could it be that the line numbers are combined off the two actionscript layers?
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::BitmapData@173f8f11 to flash.display.Bitmap.
at Function/WebsiteNew_fla:MainTimeline/RollingTractor/WebsiteNew_fla:tractorBodyLoadComplet e/WebsiteNew_fla:backWheelLoadComplete/WebsiteNew_fla:frontWheelLoadComplete()[WebsiteNew_ fla.MainTimeline::frame1:235]
yes. layers don't exist in your swf.
so, to find the problematic line number add the total lines in each layer starting from the top layer (unless you specified a different load order). the first layer that exceeds the problem line number contains the problematic line of code. subtract the total lines in the layers above the problem containing layer from the line number in the error message and you'll have the problematic line number in the problem containing layer.
Similar Messages
-
The error message: SE 337 Please enter a line number.
Dear Experts,
We have a PO that can not be transferred to P1 because of the error message:
SE 337 Please enter a line number.
We tried to checked the transfer of the PO.
The error message came from the Backend Function BBP_PO_INBOUND.
But it is not possible to define the exact cause of the issue (the exact transfer parameter) due to missing RFC authorization.
The following changes were made in the PO (PO already mapped in Backend) after that PO cannot be transferred:
- a deleted item was set back
- WBS Element was changed
Thank you in advance.
Best regards
EvgenyHello Evgeny,
Whenever you create a PO in SRM irrespective of number of the
line items chosen, in the backend system this PO will contain
a single line item in the Item section.
If you delete all the line items in the PO and
attempt to undelete them the undeletion will not work since the PO is already
considered to be deleted in the backend.
Please try delete and undelete a individual line item
in a PO provided there is at least one item which is not deleted.
hope this helps
Daniel -
HI
I have been trying to get my new iphone activated all day and I keep getting the error message saying "activation server unavailable". I've been trying all day nothing's happening...have Apple got server issues, this was after I tried to update my phone to IOS5.
Desperate to play with my new toy but am at a loss!!!
LouiseLooks like you r not alone, few more people with at&T can't activate. If memory serves right same happened first week iPhone 4s came out. Just too many people activating their toys. I d probably try to do it at 2 or 3 in the morning. Sorry.
-
I cannot make a purchase from iTunes store. Error message is: Credit Balance unavailable. Try again later. I use a credit card to make purchases and do not have a Credit Balance. How can I correct this problem?
Might be something you haven't tried here >> iTunes Store: My credit card's security code or zip code does not match my bank's records
-
Can't download latest iTune version on my PC with Vista 64bit. Old version blocks it. Error message: "......network resource that is unavailable" references "iTunes.msi" How do I remove old version?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Installing iOS lion error message. Item temporarily unavailable.
i Have recently formatted my Mac. On attempting to reinstall iOS lion I get an error message reading 'item is temporarily unavailable, please try again later' how do I rectify this please?
"This item is temporarily unavailable.
Gary... open iTunes on your PC then from the menu bar click iTunes > Preferences then select the Advanced tab.
Click: Reset warnings and Reset cache
Restart your PC, launch iTunes. -
Error message when trying to order on line
Anyone else getting the below error message when trying to order the iPad2 online in Europe?
An error has occurred during your session. Please return to the Store Menu to continue shopping.Be aware that this happened to me and when I contacted my credit card company, they said Apple had contacted them to take the money, yet no order is appearing on my account so now I'm stuck in limbo - my credit card company has approved the transaction yet I have no record or order number with which to question apple about it
The guy at the call centre also said he had received several calls about apple over the last 30 mins so this is not an isolated incident
S. -
Cannot sign in to Elements 9 Get error message 400-photoshop services unavailable
Cannot sign into Elements 9. Get Error message 400-photoshop services unavailable
They're not available because photoshop.com is dead and gone, and any photos there are moved to revel, which you can't access through PSE versions prior to PSE 11. You should have received a bunch of emails about this back when it was happening.
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/ -
PO_CUSTOM_PKG - Error message not appearing while creating dist line
Hi,
We are trying to incorporate business logic using the POR_CUSTOM_PKG. Where as we have a requirement to add custom validations at the time of defaulting the requisition distributions. We are using PROCEDURE custom_default_req_dist for this purpose. however if any validation fails we need to display error message and we are not able to see the error message even after setting the result_code t0 2
Can someone let us know what may be the problem or how to resolve this?
Thanks
VenkateshHi,
You need to use "custom_validate_req_dist" procedure in order to perform any validation in the requisition distributions data in iProcurement and display appropriate error messages.
Thanks,
PS. -
This "Untrusted Connection" is coming up when I try to access my on-line banking site which I use all the time. I also get a OpenDNS message about Phishing and I'm not sure why or what that is. The same thing is happening on my laptop which has Windows 7.
Did this and it now works.........and I was blaming firefox!!!!!
ESET: setup -> advanced setup -> extend web and email tree -> SSL
• SSL protocol: Do not scan SSL protocol -
Premiere Pro CS6 Error Message Codec Missing or unavailable?
I know there is already a thread about this... but I couldn't figure out how to add to that thread. I have been googling for like 2 hours and get this figured out! Sorry if this is a silly question, I am very new!
A videographer sent my company a hard drive with video footage he took from our event. I need to split these clips up and import them to Premiere Pro.
Here is all my info:
Premiere Pro 6.0.2 just updated about an hour ago-
Mac OS X 10.7.5
I am trying to import and edit footage a video-ographer gave my company from an event. He sent it to us on an external hard drive. I am not sure what kind of camera he used.
I have downloaded RedCode or whatever. Updated Premiere Pro.
The file type is .mov. It plays fine in Quick Time 10, but only the sound plays in Quick Time Pro 7.
The Codecs for this file are MPEG-2 AND LINEAR PCM, TIMECODE
I also need to split these clips into smaller clips before importing into Premiere Pro, the clips are all between 8-11GB, if you want to help me with that too.I had the same issue after I re-installed both Mountain Lion and Adobe products. MOV (XDCAM) media was not reading on Premiere Pro CS6. "Codec Missing or Unavailable" kept prompting. Following ComputerNovice25 advice did not do the trick for this problem. But, I was able to fix issue by simply updating my OS. A ProApps Quicktime Codecs 1.0 was included in the update, which added the following video codecs for Quicktime-based applications:
Apple Intermediate Codec
Apple ProRes
AVC-Intra
DVCPRO HD
HDV
XDCAM HD / EX / HD422
MPEG IMX
Uncompressed 4:2:2
This update is highly recommended for all users running any MacOSX and any type of NLE.
Hope this helps. -
I have tried all troubleshooting advice given on your help page. This is a recent problem, I have had for last three years or more. I can load on my work computer but not my home laptop. I recently bought this laptop but had access on it for over a month before it stopped.
See:
* http://kb.mozillazine.org/Error_loading_websites -
Error Message Says File Doesn't Exist...
Hello. I'm trying to install a CF website on the same server
with an ASP website which is already up and running. Both sites
will access the same FoxPro data, which may lead to conflicts I'll
have to work around, but first there's another problem I have to
solve: When I try to do an SQL select statement, I'm being told by
an error message that the table I want does not exist, which is
false. Specifically, both the ASP site and my own site use the same
ODBC connection, which specifies the Visual FoxPro driver and the
path to the FoxPro tables (which is all you need to get to FoxPro
tables through ODBC).
It might appear that I should simply have a connection of my
own with a different name, but that seems unlikely because I have,
in fact, already set up a separate connection in ODBC, with a
different DSN (obviously), and pointing to an entirely different
directory where I have placed clones of the FoxPro tables I want to
access. And I did not forget to change the DSN name appropriately
in my SQL select statement. Nonetheless, I receive the same error
message in that situation. The full error message is provided after
the double lines below.
I should mention that I have pointed the ColdFusion
Adminstrator to both ODBC connections (both the one used by the ASP
site and the one used by my clone tables), and I have clicked the
Verify All Connections button, and received a response of 'OK' for
both of them.
I should also mention that my site (including the ODBC access
to clones of the same FoxPro tables) works fine on my desktop PC at
home, and on my laptop.
It occurs to me as I write this that FoxPro itself is
installed on the same directory as the one accessed via ODBC by the
ASP site, but it is my understanding that that should not matter.
Allegedly, all you need is the ODBC driver. Come to think of it,
FoxPro is also on a different directory from the tables on my PC at
home and on my laptop.
Another point which I think should not matter is that the ASP
site and my own are, in a sense, the same site. Different people
will use them, and there is no transportation from one to the
other, but both will be accessed by the same root url until such
time as the company manager decides to get a separate domain name
for mine. To be concrete, the ASP site is in the
'Inetpub\wwwroot\acrc' directory while mine is in
'Inetpub\wwwroot\Reporters'. Both are subdirectories of the Default
web site in IIS, which is Inetpub\wwwroot, accessible by the domain
name 'acrga2.com'. It is my understanding that things should work
even if the ASP dnd CFM pages were were intermixed in the same
directory.
Any suggestions?
=================== FULL ERROR MESSAGE BELOW ================
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Visual FoxPro Driver]File 'joblog.dbf' does
not exist.
The error occurred in
C:\Inetpub\wwwroot\Reporters\ListJobs.cfm: line 6
4 : <cfquery name='Jobs' datasource='ACRDB' debug>
5 : select job_no, job_date, job_time, am_pm, caller_
6 : from joblog where reporter_='#Ucase(Session.UserName)#'
and Year(bill_date) < 2000 and Year(date_chg) < 2000
7 : </cfquery>
8 :
SQLSTATE 42S02
SQL select job_no, job_date, job_time, am_pm, caller_ from
joblog where reporter_='MMM' and Year(bill_date) < 2000 and
Year(date_chg) < 2000
VENDORERRORCODE 173
DATASOURCE ACRDB
Resources:
* Check the ColdFusion documentation to verify that you are
using the correct syntax.
* Search the Knowledge Base to find a solution to your
problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US;
rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12
Remote Address 127.0.0.1
Referrer
http://localhost/Reporters/reporterlogin.cfm
Date/Time 07-Mar-08 12:23 PM
Stack Trace
at
cfListJobs2ecfm1841761115.runPage(C:\Inetpub\wwwroot\Reporters\ListJobs.cfm:6)
at
cfListJobs2ecfm1841761115.runPage(C:\Inetpub\wwwroot\Reporters\ListJobs.cfm:6)
java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket][Microsoft][ODBC Visual FoxPro Driver]File
'joblog.dbf' does not exist.
at
macromedia.sequelink.ssp.Diagnostic.toSQLException(Unknown Source)
at macromedia.sequelink.ssp.Chain.cnvDiagnostics(Unknown
Source)
at macromedia.sequelink.ssp.Chain.decodeDiagnostic(Unknown
Source)
at macromedia.sequelink.ssp.Chain.decodeBody(Unknown Source)
at macromedia.sequelink.ssp.Chain.decode(Unknown Source)
at macromedia.sequelink.ssp.Chain.send(Unknown Source)
at
macromedia.sequelink.ctxt.stmt.StatementContext.execDirect(Unknown
Source)
at
macromedia.jdbc.sequelink.SequeLinkImplStatement.execute(Unknown
Source)
at
macromedia.jdbc.slbase.BaseStatement.commonExecute(Unknown Source)
at
macromedia.jdbc.slbase.BaseStatement.executeInternal(Unknown
Source)
at macromedia.jdbc.slbase.BaseStatement.execute(Unknown
Source)
at
coldfusion.server.j2ee.sql.JRunStatement.execute(JRunStatement.java:254)
at
coldfusion.sql.Executive.executeQuery(Executive.java:1196)
at
coldfusion.sql.Executive.executeQuery(Executive.java:1008)
at coldfusion.sql.Executive.executeQuery(Executive.java:939)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:325)
at
coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:831)
at
coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:521)
at
cfListJobs2ecfm1841761115.runPage(C:\Inetpub\wwwroot\Reporters\ListJobs.cfm:6)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:192)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:366)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:279)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48)
at
coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:175)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at
coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at
coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:284)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)I have now discovered that my site does work when it's
accessed from outside using its full url,
www.acrga2.com/Reporters/ReporterLogin.cfm.
Nonetheless, it would help my understanding of the technology
to know why I could not access it directly from the server. After
all, the whole thing was developed working as localhost on a single
PC. But I was not able to access it from the server I just
installed it on, neither as localhost nor with the full url,
www.acrga2.com/Reporters/ReporterLogin.cfm.
Or rather, more accurately, I could access the site, but I
could not connect to the FoxPro database via ODBC from within the
site.
I realize this is an arcane issue - very few people outside
of old codgers like me still program in FoxPro - but it would be
interesting to know why this occurs. Any ideas anyone?
Anyway, I was really worried. My client was NOT pleased. But
now he's happy again. Whew! -
Can't save file: error message states -unbalanced tag..
<body class="twoColElsLtHdr">
I am not able to 'save as' a file I created yesterday. An error message box comes up & states that line 249 is an 'unbalanced tag' I am hoping someone can explain what I need to do to get this problem resolved. I was making a 'blurb optin page' just playing around with the newly downloaded DW & ended up (kinda) liking what I had made by the seat of my pants not knowing obviously what I was doing. I inserted a 1shoppingcart html at one point & that is when things got screwey...Line 249 is very close to where I inserted the extra html code... Can someone help me please? ... The unbalanced tag is listed above. I don't know if this is all the info that would be needed for the solution.... Please let me know...
I thank you... MaeCould also mean there is an unclosed tag of some sort either a div, a table, .. it's only a guessing game without actually seeing the working page.
Could you upload the page (and associated files) to a server and provide a link.
Another way would be to put the page through the html validator and see if it picks up where the error is;
HTML Validator - http://validator.w3.org -
BOBJ DS : Error messages are often hard to understand
Hello DS experts,
is there a way to get some more information to an error message instead of only a one-line sentence ? It's pretty hard for a beginner to dive through the sometimes pretty cryptic message texts.
Roger???? Everything that is said in the error log ?????
When you execute a job, either in Designer or Management Console you can see the trace/monitor/error logs. The error log is the clear text message about the problem including messages from the underlaying libraries, e.g. database messages and the such.
I seem to not getting your point, sorry for that.
Maybe you are looking for
-
Wierd error message and computer restarting
Everytime I try to change any ipod preferences, I get the following error message: "An error occurred when updating the default player for audio file types. You do not have enough access priviliges for this operation." Then, when I press OK, my compu
-
Ok today I bought an apple tv. My plan is to use it in conjunction with my ipad2 & computer. My problem is that I am a bit of a div and need some help with some really basic questions. 1. To view itunes on apple tv, does your computer always need to
-
Post Author: Moriconi CA Forum: General Hey everyone I need some help with images in CR-XI. I have a db of Items that I sell in my store with all of the specs listed and I want to link the pictures of each item into my report. I cant seem to get the
-
Instantiate Oracle BPM Process Webservice from the OSB.
Hi, In our project we have one requirement i.e Instantiate Oracle BPM Process Webservice from the OSB.After register BPM service in to OSB I am creating one Message flow to instantiate BPM Process. first call to startSession Operation, then use respo
-
Select DREF(xy) from table
Hi I'm try to select Data from a Reference Attribute. ("SELECT DEREF(ABT) from angestellter") When i do this in SQLPlus, it works. But when I try to get the Result as XML in Java, i get following error: <ERROR>oracle.xml.sql.OracleXMLSQLException: Sy