How to post a PARK document with Withholding Tax

Hi All,
I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
"Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
My entries are :
29J Vendor a/c Dr.
50 XYZ a/c
If i using F-02 and not parking ;then it is getting posted.
Note: Line Item is a special G/L Indicator
Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

Hi Parag,
Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
But,when posting the parked document ,it is asking for Section Code.
The error message displayed is:
"Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

Similar Messages

Reg:how to post the parked documents using BDC

Duplicate message in General deleted. Please do not post the same question in more than one forum.
Hi
I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
Please suggest me a solution for this.
Thanks,
Satish
Edited by: Matt on Dec 3, 2008 7:40 PM

Hi Rob,
Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction. Please send the code.
Thanks,
Satish

Posting a parked document with a BI session

Hi, I am trying to post a parked dokument in FI through a batch input session.
The problem is that the parked dokument is yet not complete and I want to complete it with the missing line items and post it in one step, meaning with one batch input. is that possible? especially in using the RFBIBL for triggering the batch input session.
Is it possibel to post a parked document with FB01 when parked dokument and 'new posted document' have the same document ID? what happens with the parked document if this is possible?
thanks! for your help
denise

Hi
I suspect it may not be possible. The only option i could see in FBS1, is Post with reference, but again it would not accept parked document as reference
Thank You,

How to clear line items with withholding tax manually

hi Experts,
i posted a vendor invoice with withholding tax and i made payment as well but not through f-58.
now i wanted to clear these two through f-44 but it gives the message withholding tax information ignored and didnt display the invoice as open item.
how do i clear both the trasactions
regards
suresh

hi Praisty,
thanks for the reply
i have a second opinion on your statement that no matter whatever tcode you use for payment it will clear the open item. Even in F-58, if u make partial payment it will not clear you open item. But i didnt use f-58 as i said earlier.
i used FBV1 for parking the document through which i entered the payment details...ofcourse it doesnt have the option for clearing the open items, cheque printing and it will not update your cheque register. i posted the parked document through FBV0. for all practical purposes, this is my payment document but it didnt clear my open item, in order to clear it i now used f-44.
regards
suresh

Not able to post a parked document in G/L

I created a G/L document using FB50. After Simulating it I parked the document. When I try to post the document using FV50, the "Post" tab is not active in the parked document. Can anyone suggest how to post this parked document?
Regards

No matter what transaction you use, the Post command will show as greyed out.
That's simply because to post the parked document, choose the icon "Save as completed" either from the screen icon, or from the top menu (Document --> Save as completed).
The document will be saved and effectively will be posted. You can then go to FB03 (or any other view txn), and use the same document number to view the posted document.
Rgds
Gulshan

F110: how to pay an invoice with Withholding Tax and a credit memo?

Hi All,
in my SAP I've defined a Withholding Tax type for Payment Posting.
I've posted a vendor invoice with with Withholding Tax.
Later I've posted a credit memo with Withholding Tax which must compensate the prevuois invoice.
When I launch t.code F110, SAP, in the right manner, proposes to pay the invoice less the amount of the credit memo.
But the calculation of the Withholding Tax (that it should post al the payment time) is wrong: SAP proposes to post the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the invoice. Instead, from it, SAP should detract the amount of the Withholding Tax recorded in the table WITH_ITEM at the moment of the posting of the credit memo.
Why does SAP doesn't consider the amount of the Withholding Tax of the credit memo?
Could anyone help me?
Thanks

Dear Rossi,
if You defined the WT TYPE at the payment time this means that the WT amount will be calculated at posted during the F110 run as per the invoice as per the credit memo.
If they are the same amounts and refer to the same wt type and code, when You run F110, they should match even for the WT calculation. It is clear that if You inserted manually the WT base amount or the WT amount into the invoice, the system will not do any automatic calculation but it will use these amounts that can be different from the one auto matically calculated by the system for the credit memo.
I hope this can help You.
Mauri

Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

How to park document with reference?

Hi All,
We have function to post document with reference in SAP but how about park document with reference?
Can anybody help me?
Thanks n really appreciate

Thanks for your reply. Fyi, I've applied employee limitation to post manual journal at tcode OBA4 and OB57.
User A : >100K - 500K
User B : >500K - 1 MILL (Asst. Manager)
User C : >1 MILL (Manager)
Normally user A will park all the journals but after apllied the limitation, user A only can park for the journal (normal tcode F-02 or other tcode) which not more than 500K. The limitation affect the park as well.
Alternative for tcode F-02:
User A : Park doc at FB50 (any amount) and post at tcode FBV0 by other user. There's no park or post with reference.
User request to park with reference.. Any idea?
Thanks friends

Error F5 702 while trying to post a parked document in MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help?
Regards,
Anitha

Hello Raju,
Its a invoice which the user posts via a MIRO.
I can do it with a FM also, U r right.
There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there has been any exchange rate problems etc...
Thanks,
Anitha

How to post invoice parked using BAPI- BAPI_INCOMINGINVOICE_CREATE

Hi all,
Can anybody help me with the following scenario:
I am parking Invoice document using BAPI: BAPI_INCOMINGINVOICE_PARK. It gives me a document no. which I can see in frontend system also by committing the BAPI.
But when I try to post the same using BAPI: BAPI_INCOMINGINVOICE_CREATE , It gives me a different document no.
Means it is not posting the document which has been parked earlier but it is creating totally a new document. Can anybody tell me using BAPIs how to post the same document that I had parked using BAPI: BAPI_INCOMINGINVOICE_PARK??
Thanks
Saurabh

Hi Shraman,
For a requirement for Intercompany GL posting, use BAPI_ACC_DOCUMENT_POST for standard posting with some advanced parameters
In Header of the BAPI, pass the hardcoded values like
DOCUMENTHEADER
 OBJ_TYPE = FKKSU
 OBJ_KEY = $
 OBJ_SYS = System name
 BUS_ACT = RFBU
Other parameters you can pass in Header is:
USERNAME
HEADER_TXT
COMP_CODE
DOC_DATE
PSTNG_DATE
TRANS_DATE
FISC_YEAR
FIS_PERIOD
DOC_TYPE
REF_DOC_NO
If you are posting a document in cross-companies 1000 & 1001, you need to pass cost-center with the line item. That is the mandatory field.
Thanks,
Guru

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Posting A Park document of year 2005 in 2007( Error message no. FP 041)

Hi All
I have a parked document in year 2005 and know the user want the same to post in 2007. while changing the header(posting date and making as 01.01 2007) through T.code MR44.
I am getting the following error.
Changing of document number or fiscal year not possible here
Message no. FP 041
Please let me know whether i can post a parked document of 2005 in 2007.
or any way to rectify the same.
regards
Ramesh

How can we change a parked document's fiscal year?
I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
When I use FBV2 to change header information, it shown up an error message:
Changing of document number or fiscal year not possible here
Message no. FP041.
How can I do now?
Thanks.

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Posting the MIRO Document with reference of PO

Hello friends
while user posting the MIRO Document with reference of PO , he is getting difference in balance
Total amount is 31,237.00
Posting amount is 28,320.05
Balance amount is 2,916.95 this balance amount not getting post in MIRO
Before that i have seen GR amount is 28,320.05 but In IR amount same 28,320.05 but withholding tax tab not appering withholding tax amount
Can any body please help me on the same
Regards
sudharshana vamsi
Edited by: asuvamsi on Feb 24, 2010 1:43 PM

Hello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi

Post the Park Document

Hi,
When we post the park document, the following error Message showing.
No Batch Input data for Screen SAPMF05A 0302
What is the problem and how to solve this?
Thanks in advance

Hello,
Refer SAP Note 1226243 - Parking the fields BSEG-VERTT, BSEG-VERTN, BSEG-VBEWA
Regards,
Ravi

How to post a PARK document with Withholding Tax

Similar Messages

Maybe you are looking for