[Error] No timing pattern determined for horizon in /SAPAPO/SEQ1

Hi Experts,
I'm trying to use transaction /SAPAPO/SEQ1 for Model Mix Planning (Sequencing) and I get this error message :
No timing pattern determined for horizon 2010/07/09 11:00:00 to 2010/07/14 19:00:00
Message no. /SAPAPO/SEQ130
Can't find anything on it on the Web or OSS.
Does anybody ever had this error ?
Thanks,
Marc

Hi Ranjini,
Please look into the following
1) Customer master data is fully maintained
2) Customer number ranges are fully defined in customisation
3) Customer address details are maintained
4) Is there any special characters used while defining customer data or customer
number like $, #,[ etc.,?
5) Customer int models are active in SCM side prior to IDOC processing (including
customer, demand, stocks etc)
Please confirm your findings
Regards
R. Senthil Mareeswaran.

Similar Messages

  • FM Error: No assignment object determined for P100 / 457000

    Dear GURUS,
    we are facing the problem while changing the PO and system is giving the error message as CB item 00010: No assignment object determined for P100 / 457000
    we checked in FM9K and reconstructed in FMBV and run the report .
    pl suggest...
    Message no. BP748
    Diagnosis
    The budget structure for the combination funds center P100/commitment item 457000/fund  in line item 00010 does not contain a superior assignment object in the commitment budget.
    Also, if you have only assigned one assignment object in the commitment budget, you must create assignment objects in such a way that every assignable element has ONE assignment object in the upward path in the commitment budget.
    System Response
    Posting not made.
    Procedure
    1. Define a superior element in the budget structure or define the BS element itself as an assignment object in the commitment budget.
    2. Check your definition.
    3. Reconstruct the assigned values for the fund and year where you have changed the assignment object definition.
    Regards,
    Venkat

    Hi,
    Please check the Note 1080301
    Summary
    Symptom
    You receive the error message BP746 or any similar message (see below).
    Other terms
    BP 746 - BP746 - BP 747 - BP747 - BP745 - BP 745 - BP748 - BP 748
    Reason and Prerequisites
    You use the functionality of assignment objects in the budget structure for Former Budgeting
    Solution
    The functionality of the assignment object is not generally released for customers.
    Customers who want to use this functionality must first contact SAP consulting, if they are allowed to do so.
    If you do not need or know this functionality, then you must update the budget structure (transaction code FM9K) and remove the definition of all assignment objects. Sometimes, the corresponding columns are hidden in the transactions FM9L or FM9K. If this is the case, you should first activate them in the table control settings (right-upper button). The columns in FM9K and FM9L have the titles "CmA" and "PmA".
    If you use a complex budget structure, the easiest way to detect these assignment objects will to search in table BPCJ for entries with the field WRTTP equal to 72 or 46. As well you can use table BPCK which tells you whether assignment objects are used or not, by filtering entries with the field WRTTP equal to 72 or 46.
    After removing all combinations detected in tables BPCJ or BPCK using transaction code FM9K, you must reconstruct availability control, by means of transaction code FMBV.
    Note
    Problems with assignment objects are detected by the report BPCARRC0.
    Thanks & Regards,
    Shashi Kanth.

  • Error in profit center determination for settled vendor down payments

    Hello All,
    When we try to settle vendor down payments an error is detected for the profit center determination .
    The settled down payment is found on the dummy profit center instead of the profit center of the original invoice. This means that the reporting of oustanding payables per profit center is wrong
    When you only see the invoice and not the settled down payment which should reduce you outstanding debt (down payment already paid).
    Can any one help in this matter
    Regards
    Arun

    Hi,
    Check the document splitting configuration. Advances to vendors recon.. account should be assigned as category 'Vendor 'special gl transaction''.
    Check the document type 'KA' transaction as '0300'... or unspecified posting.
    Thanks,
    padmaja N

  • Error in Migo: Account determination for entry NCSA KDM not possible

    We did not setup the account for KDM as we fixed the exchange rate at PO. Did not expect such error when perform GR for foreign currency PO. This happened in our production environment.
    In the developement environment, did not encountered such problem.
    Would appreciate if anyone had encounter the same issue enlighten us where went wrong.
    Regards,
    Peck Har

    Hi,
    Yes, the data entry (PO) is correct. And compare the valuation setting in IMG of developement environment seem alright. Not sure what's else to check.
    Regards,
    Peck Har

  • Error during material determination for sales document item - RRB

    Hi
    Iam getting following error when trying to create a billing request using DP91.
    Error during material determination for sales document item 40001560/000010
    Message no. AD01155
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    I have checked my DIP profile using ODP02 there are no errors in it, I have created a Setid and assigned it to costing element in selection criteria and material determination criteria.
    Material origin is checked in costing tab in material master.
    Appreciate help in resolving this.
    thanks,
    Vaishnavi

    Hi Vaishnavi
    The error which you are getting is related to costing.So kindly reach your FI Consultant
    please check the following links which may help you.Also check the link that has been provided my Lakshmipathi
    ERROR AT DP90  TRANSACTION
    Regards
    Srinath

  • In DP50 Error during material determination for service order

    Hi,
    While doing Resources-Related Billing request,the following error is displaying..
    Kindly Help
    Error during material determination for service order
    Message no. AD01156
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    501384
    Message no. AD01156
    Diagnosis
    An error occured during material determination for a dynamic item.
    System Response
    The system cannot perform the function.
    Procedure
    Check in the profile being used whether its characteristic allows the assignment of a material to each dynamic item.
    Thanks,
    Mohit

    Hi mohit,
    You need to check DIP profile setting if profile is attached to your order type or not please check this
    Thanks and regards
    Sachin Kadam

  • Error:Account determination for entry 1000 KBS 0001 not possible

    Hi all,
    i created one project PO account assignment category Q ,with out master data ,material text , material group , i entered W.B.S  ,
    P.O . created ,while doing GR , i am getting following error Account determination for entry 1000 KBS 0001 not possible
    regards
    vijju

    Dear Viju,
                                                                                    The error M8 147(Account determination for entry XXX KBS                
    not possible)is because of the corresponding entry mismatch in T030                     
    table .For resolving this we need to make a corresponding entry in                      
    transaction OBYC (the menu path in SPRO is as follows)                                                                               
    Materials Management                                                                    
    -> Valuation and Account Assignment                                                     
       -> Account Determination                                                             
          -> Account Determination Without Wizard                                           
             -> Configure Automatic Postings                                                                               
    Please also review                                                                      
    Note 364570 M8147,KBS posting when assigning accnt to GR for PO                                                                               
    Regards                                                                               
    V V

  • Message no. M8147 : - Account determination for entry TLRG KDM not possible

    Dear Friends,
    We encounter with error message M8147:-Account determination for entry TLRG KDM not possible while posting a MIRO entry, here is the brief analysis.
           Goods receipts is posted the following entry with exchange rate 3.81650
                         RM-Paper A/c                 USD 31075.24 and ARS 118598.67
                               GR/IR Clearing           USD 31075.24 and ARS 118598.67
    Now while posting MIRO exchange rate is 3.8863, as there is difference exists with GR rate system is trying to identy GL account from transaction key KDM (Materials management exch.rate diffs) but we have not mantained any account there.
    Now what I want to understand is that I have seen the cases when there is a exchange rate difference it will be adjusted to Expense A/c in this case it should be RM-Paper A/c but why system is looking for an entry to KDM transaction key.
    Please give us an idea why system is behaving is like this and how to achive the funtionality of adjusting the exchange rate difference to expense A/c.

    hi all,
    I am also facing this error
    Account determination for entry ____ GBB ____ BSA 7900 not possible .
    The system cannot find account for posting. OBYC i have checked but not getting any solution. Can you suggest something?
    Regards,
    Diptanshu gupta

  • Business area not determined for line item?

    Hello All,
    I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
    I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
    Is there anything else need to be done? Do we have to define or assign the business area in material master?
    I would appreciate  if somebody can answer.
    Thanks.

    There are three rules for determining a business area:
    o   Rule 1: plant and division 
    o   Rule 2: for each sales area          
    o   Rule 3: for each plant and item division
    See what you are missing

  • Account determination for posting area "1040

    Hi
    While creating a check lot we're getting the error as
    "In account determination for posting area "1040" (interim account for incoming payments), your specifications are either incomplete or missing.
    The transaction affects company code UINF and currency USD."
    Any clue about the reason
    Regards,

    Hi ,
    Maintain the interim account for incoming payments through the T.code  FQC0.
    Regards,
    Konakanchi

  • Account determination for entry PRD not possible

    Hi All,
    In exsiting PO line, we did two goods receipt, and we tried to invoice the vendor based on the goods receipt. The wearid thing is only one goods receipt got invoiced, the other gives error message saying: " account determination for entry PRD not possible ".
    I checked with finance team, they said we intentionally didn't set up the account for price difference. And if one GR can be invoiced and goes to correct accout, the other one should be able to invoice as well, when I simulate the entry, the vendor account didn't get picked up, I think that's the key of this problem.
    why the vendor account didn't get picked up by the system? please advise if you have any thoughts, I appreciated.

    Nancy,
    This is the restriction with materials managed in moving average price. I'm guessing that the user has performed goods issue between GR and IR on the second material. If you'd like to keep the current config setting, you will need to reverse the GI transaction, post the invoice, and repost the GI.
    The above steps should resolve your current issue. However, this may not be the best approach as you will need to keep asking user to reverse their GIs every time the stock quantity is less than invoiced quantity. I would recommend that you talked to FI folks and convince them this is part of standard SAP process. It makes sense because we want to distribute the difference between invoice price and PO price to the existing stock quantity. Without this restriction, the moving average price can be skewed disproportionately.

  • Getting an error "Customer could not be determined" for IDOCs in SCM 7.0

    Hi Friends,
        I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
    The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
    I have noticed that 2 things .
    1.  E1ADRE1 field is NOT being sent by the ECC system .
    2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
    Has anybody faced this problem before ?
    I look forward to replies.
    Detailed error is given below.
    Regards,
    Ranjini.
    Customer could not be determined
    Message no. /SAPAPO/EDI010
    Diagnosis
    The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
    The section was not available in the processed IDoc.
    System Response
    The system cancels processing.
    Procedure
    Configure the EDI convertor in such a way that the corresponding section has a value.

    Hi Ranjini,
    Please look into the following
    1) Customer master data is fully maintained
    2) Customer number ranges are fully defined in customisation
    3) Customer address details are maintained
    4) Is there any special characters used while defining customer data or customer
    number like $, #,[ etc.,?
    5) Customer int models are active in SCM side prior to IDOC processing (including
    customer, demand, stocks etc)
    Please confirm your findings
    Regards
    R. Senthil Mareeswaran.

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Error message "No business area can be determined for item 000010"

    Hi all,
    I had maintained business area assignements.
    However, while creating a sales order, the following error message appears : "No business area can be determined for item 000010"
    What does it mean ? And how can I fix this problem ?
    Regards,
    Bahia.
    Edited by: Bahia M. on Nov 13, 2008 11:58 AM

    Dear Bahia,
    Please go to IMG path assign the business area
    IMG>Enterprise structure>Assignment>Sales and Distribution>Business Area Account Assignment-->Define Rules By Sales Area(Roule 1)
    -->Assign Business Area To Plant And Division
    I hope this will help you,
    Regards,
    Murali.

  • Error showing - No price could be determined for subcontracting in CK11N

    Hi,
    We are facing a problem in CK11N that while we are creating Material Cost Estimate with Quantity Structure, getting an error message..
    No price could be determined for subcontracting
    Message no. CK468
    Diagnosis
    The system could not calculate a price for the subcontracting because none of the valuation strategies in valuation variant 001 was successful.
    System Response
    If the system issues a warning message or an information message, the costing item is used in the cost estimate with a zero value.
    If the system issues an error message, it sets the status "KF" (costed with errors).
    If the system issues a termination message, the cost estimate cannot be processed.
    Procedure
    If you have authorization for Customizing, check the valuation strategy for subcontracting in valuation variant 001.
    I read many thread already, but no solution is suit my requirement..
    please help..

    We run the transaction OPN2 and select 001- Planned valuation - mat. Valuation Variant. Db Click on it and select Subcontracting tab.
    There Strategy Sequence is defined as under:
    Priority......Strategy Sequence
    1...............Effective price from Purchase Order
    2...............Net Purchase Order price
    3...............Effective price from Quotation
    and in Quotation in Purchasing option, there is selected - Auto quota arrangement.
    please guide.

Maybe you are looking for