Error of type Not a known DirStatus - WGM throws error upon user creation

Dear MacWorld,
i run a OS-X 10.5.8 Server as OD-Master, clean install on MacPro, no migration, all updates applied, everything fresh from scratch, but my 2md installation of OS-X-server. All standard checks accomplished (Kerbreros, DNS, LDAP, ... everything fine so far).
Each time i add a user in WGM (run remotely via ARD) i receive the errormessage
"Got unexpected error
Error of type Not a known DirStatus (-1) on line 2112 of /SourceCache/WorkgroupManager/WorkgroupManager-319.2.2/Plugins/UserAccounts/Use rAdvancedPluginView.mm"
Makes me feel uncomfortable, although the resulting accounts look healthy so far. Since this is the last check before the final roll out of my OD in my organization, i'd like to get rid of it now rather then troubleshoot the OD later.
Any hints?
Cheers,
my first post here!

You seem to have your targetEntity mixed up, the @OneToMany should be B.class and @ManyToOne should be A.class.

Similar Messages

ERROR OGG-01148 programming error, data type not supported for column

I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support

ESS Business Package Error: Period type not allowed for profile ESS

Hi,
We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
Critical Error:
Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
Any ideas on how to fix this issue?
Regards,
Jojo

Hi Jojo,
Have you solved the problem? If yes can you please help me even I am facing the same error.
this is very help full to me .
Thanks and Regards,
Shilpi.

Error : Inspection type not properly maintained

Hi Experts,
I am trying to perform MB1B for a material and its giving me an error ...." Error : Inspection type not properly maintained" any suggestions would be appreciated...
Regards
Albert

Hi
Check the material master Quality management view where the inspection type is maintained.
Check the settings for inspection type in that material master.
Regards
Prasad

ERROR :SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd. File: default.html

Hi ,all
I am beginner for windows 8 app development.
I created simple project on domain name called www.aaa.com and also hosted web services on same domain. at that time i was able to access web services on my application code using AJAX. Then i created same project on another domain called www.bbb.com then
i tried to access wcf services from www.aaa.com domain. at that time my javaScript console is throwing this error "SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd.
File: default.html". I tried some thing on both end on web services project as well as windows 8 app.
AT app side in package.appxmanifest file i added below code.
<Capabilities>
 <Capability Name="privateNetworkClientServer" />
 <Capability Name="internetClient" />
</Capabilities>
AT web services side in web.config file i added following settings.
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"
 multipleSiteBindingsEnabled="true" />
 <standardEndpoints>
 <webScriptEndpoint>
 <standardEndpoint name="" crossDomainScriptAccessEnabled="true" />
 </webScriptEndpoint>
 </standardEndpoints>
but above all diagnostics are not working for me.
and one more thing at www.bbb.com domain in sample android app while i am trying to consume my wcf services it is working fine. the problem is specifically for windows 8 app only.
Here is sample code which i had written in default.html file
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8" />
<title>DemoWebService</title>

<script src="/js/default.js"></script>
<script>
var personNameVar = "Hardik";
var dataIn = '{' + '"personName":"' + personNameVar + '"}';
$.ajax({
url: "http://SomeIP:SomePort/Service1.svc/HelloWorld",
type: "POST",
contentType: "application/json; charset=utf-8",
data: dataIn,
dataType: "json",
success: function (data) {
var object = JSON.parse(data.d);
if (object.Error == '') {
$('body').html(object.Response);
error: function (error) {
$('body').html(error);
</script>
</head>
<body>
</body>
</html>
so is there any help. I am eagerly waiting for it.
P.S I am accessing www.aaa.com web services using VPN.
Thanks in advance,
Hardik

In that case, I recommend that you collect a Network trace using a tool such as Microsoft Network Monitor or Wireshark to understand what IP Address is the connection being made to. The 0x2efd error correlates to the WinINet error: ERROR_INTERNET_CANNOT_CONNECT
meaning that the connection with the remote server cannot be established. When you collect a network trace, try looking for the TCP-SYN signal and see whether your remote server responds with a SYN-ACK.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog

I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred" keeps popping up.

This is a question for a mini iPad...
I am trying to download an app and keep getting this error message: "Could not sign in. An unknown error has occurred. I have tried shutting down and restarting. I've tried changing the password. I get the error message with free and not free apps. Any suggestions on how to fix?

Reports are that this is a problem with the iTunes Store that they're working on. Some people have had success after signing out of their account and back in. If that doesn't work for you, wait a few hours or perhaps until tomorrow and by then they may have the problem sorted out.
Regards.

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

Hello, Sameh.tolba.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the two articles below when experiencing this issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
iCloud: Making sure that iCloud works with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Jason H.

Error: 'Transaction type not possible (no affiliated company specified)'

Hello,
I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN
It get the error message: 'Transaction type not possible (no affiliated company specified)'.
I could go to AO76 to mark the 'post to affiliated company'.
How can I check which transaction type it uses? With the transactio type group? Or something else...?
Regards,
Pamela

Hello,
actually, the problem lies with the transfer of assets under construction to low value assets with are happening in the CURRENT year, and not the previous year. AuC to LVA transfers from previous years are allowed, but not the one in the current year. Because it uses a different transfer transaction type... The transfer variant 4 (= transfer within company code) is the correct one I assume.
Regards,
Pamela

Error Document type "" not defined

Hi All,
I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
The Infoset is build on top of BKPF,BSEG and EKPO Tables.
Document type not defined
Message no. F5814
Diagnosis
Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
document type "" has not been set up in FI customizing
document type is supplied incorrectly from the calling application
System Response
System error.
Procedure
There are two possible measures:
set up document type "" in FI customizing
system error within the calling application - get in contact with the SAP Hotline Service.
Any input on above issue will be of great help.
Regards,
Anjali Singh

Hi Anjali,
In which system you are getting this error? Development or Production?
I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
Regards,
Omid

While click on document shows error"document type not defined"

HI
we have folder structure in DMS like:
public folder->engineering folder->design folder->document(any)
while i am clicking on document it shows error msg document type not defined
please let me know why this error occur

Hi,
Since you are using document structure functionality, You are require to create an public folder initially and private folder for each user which is specific to user ID.
If you dont want to create private folder you can select "Select document Via in CV03N screen and select only" Selection screen " and not browser.
If the above changes is done then system will not through an error from CV03N screen"document type not defined"
reward points if useful.
Rgds,
Nayeem.

Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore

Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!

Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any help

Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Pricing Error- Condition type not found.

Hi Gurus,
I have a issue with pricing.
Scenario :
For a pricing procedure i have 3 condition types ;
For example :
ZXED, ZXE1 & ZXE2.
Of these ZXED is Manual, Mandatory & Statistical in nature.
ZXE1 & ZXE2 are Manual.
When i create a sales order my pricing procedure is getting determined correctly.
The issue comes in when i try to key in the values at the item level condition in the sales order:
If i see the options(F4) available for me to select the condition types i get have see only one condition type i.e ZXE1. but esentially i should get to see all the 3 condition types as an choice of code(condition type).
Can any one help me to find out the possible reason why i get to have only one condition type for selection.
Your suggestion is highly appreciable.
Rgd
VIVEK.

Hi,
1. Understand onething that a particular condition type if maintained "mandatory" in the pricing procedure then you will have to create the condition record for it using transaction code "VK11". If it is manual then you can give the rate directly in the sales order after selecting it. Since you have maintained "manual", "mandatory" & "statistical" for the condition type "ZXED" at the same time that is why the system is giving you the error "Pricing error" Mandatory condition ZXED is missing."
2. Also you want the system to show you all threee condition types "ZXED', "ZXE1", "ZXE2" to choose manually as per your requirement. Do one thing go to transaction code "V/06" - select the required condition type say "ZXED" - double click on it - in the "changes which can be made" section you will see a field for "Manual entries" - in this select "no limitations" and save the condition type. Similarly do it for the other 2 condition types and save it.
I tell you you must have maintained there "D-not possible to process manually". If this is maintained then the system will never show you the condition type to choose from the condition type list in the sales order.
Note: You have maintained for "ZXED" manual/mandatory/statistical. Now as it is mandatory also you have to maintain the condition record for it in "VK11". Now if you change the rate of this condition type in the sales order then when you will create the invoice in "VF01" the system will show that value only which has been maintained using "VK11" because in billing also the system fetches the condition record from VK11 for the mandatory conditions.
Hope this clarifies and solves your doubt.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

While doing inter co. transfer-error tran type not possible(no affiliateed)

Hi sap Gurus,
When i am doing inter company transaction i am getting an error releated to transaction type.
the error is transaction type 7777not possible ( no affiliated co. specified)
this is the error i am getting
here 7777 is my co.code
please give me the best solutions for me
With best regards
Ravikanth

HI
Please post the complete error message number
and also please check transaction code OBYA
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jul 31, 2009 4:00 PM

When I attempt to open Photoshop CS5.5 I get an error message: "Could not initialize Photoshop because of program error", anyone seeing this?

After I upgraded to Mavaricks I get the above error message and Photoshop CS5.5 will not open.

i7 is quite fast. that's what i am on too. You may need to
It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
The order varies depending on your individual needs:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.

Error of type Not a known DirStatus - WGM throws error upon user creation

Similar Messages

Maybe you are looking for