Error popups Item category to be assigned

Hello Sir/madam
"There is no item category assigned to account to the specified company code" , if a pop up , message comes like this , what the way to sortout, such error, have assigned in charted occount, in F-02 after updating, amount, once try to save, this type of error is given,
Been to spro and did document spliting,-activate document splitting, but, again error is coming, and the trasaction is not accepted.
thanking you,
warm regards

Hi
Please give in document splitting accounting which you are using in for posting in f-02 and give category save.  Then go to f-02 please check.
Regards
Ramesh

Similar Messages

  • Item category and Account assignment category field grayed out in PR/PO

    Hello all,
    While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
    Is there anyway the fields can be made modifiable in ME22N/ME52N ?
    Please help!
    regards,
    Soumyadeep.

    Hi,
    Well, actually you can control the Field settings in customization of Document Type. Check the following :
    Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
    Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
    Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
    Hope this helps,
    Best regards
    Amit Bakshi

  • Error in Item Category Determination

    Hai,
    When I am trying to define the Item category determination for the quotation type I get the following error message
    "only quotation items can be assigned to package transaction types"
    Can you please let me know the reason for the error
    Thanks,
    Vijay

    I was able to resolve it.

  • Item Category Vs Account Assignment

    Hi,
    Can any body help me in configuring the item category "L" and Account Assignment Category "K"
    Where i can configure?  So that while releasing purchase order, Whenever, item catgegory "L" is selected,  Account Assignment category "K" shall also be allowed. It must not be mandatory but it can be optional.
    With Regards
    MNV Ramana

    hi
    Definition: Account Assignment Category: - A key indicating whether an item is to be assigned to an auxiliary account (such as a cost center).
    The account assignment category determines which account assignment details are required for the item (for example, cost center or account number).
    you can assign the account assignment category K to item category L in
    SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories

  • ERROR : No item category exists (Table T184L LB VERP  )

    There is a error log "No item category exists (Table T184L LB VERP  ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
    I already add item category LB VERP via TCode 0184, but it still error.
    Could anyone help me please
    Thanks & Best Regards,
    Saiful arif

    Hi Arif,
    Did you define delivery item category for LB VERP record in transaction 0184?
    Regards,
    Csaba
    Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM

  • Exact difference between Item category and Account assignment category

    Can anyone plz give the exact difference between account assignment category and Item category
    Thanks inadvance

    Hi,
    Account Assignment Category: Key indicating whether an item is to be assigned to an auxiliary account (such as a cost center). The account assignment category determines which account assignment data (e.g. cost center, account number, etc.) is required for the item.
    Item category: Identifier indicating the characteristics of an item. The item category determines whether the following are necessary or allowed with regard to an item:
    Material number, Additional account assignment, Inventory management in the R/3 System, Goods receipt, Invoice receipt.
    Prase

  • Sales order BAPI giving error - No item category available (Table T184 ...

    I am trying to create a sales order from a portal application using BAPI_SALESORDER_CREATEFROMDAT2. For certain type of materials, an error message is coming like: 
    No item category available (Table T184 ZOR NORM PSA1 ZSME) ZOR
    Error
    in VBAPKOM 000020 VBAPKOM
    Item 000030 does not exist 000030
    Sales
    document was not changed
    I have checked in vov4 and consulted SD consultant. The vov4 settings are set as below and our SD consultant says they are ok and need not be changed, as when we are creating this order in SAP, it is a success.
    ZOR NORM PSA1 ZSME
    ZOR NORM PSA2 ZSME ZSHP
    ZOR NORM PSHP ZTAX
    Now, the standard code where this error is coming is calling a function module "RV_VBAP_PSTYV_DETERMINE" which checks for the higher level item category. The material at item 10 meets the criteria, but material at item 20 fails as PSA1 does not have any such row (above) indicating higher level iteam.
    Interesting thing is when I try to create the order in SAP with these materials, it creates the order. There is also a material substitution rule in place, which also seems to be working fine.
    Debugging the standard code has not yet given any result.

    Since you had indicated the VOV4 settings, I presume, the item category ZSME is maintained under the tab "DfItC".
    On your comments,
    For certain type of materials, an error message is coming like:
    I feel, the root cause of the issue is Item Category Group in material master.  Check for those which creates an issue with the one which is running successfully.
    thanks
    G. Lakshmipathi

  • Batch split error message: Item category not defined

    Hi gurus,
    I'm trying to use the batch split in an inbound delivery but I get the error message of the subject of this thread while saving.
    Could you bring some light here please?
    Many thanks,
    Marc

    Issue found.

  • Item Category D and Account Assignment F error message in RFQ

    Hi gurus,
    Am experiencing a strange error message creating an RFQ from a Purchase requisition generated by a maintenance order : "Combination item category D/account assignment category not defined".
    The combination Service D/ Order F is actually defined in customizing step : "Define Combination of Item Categories/Account Assignment Categories": The Purchase requisition in indeed created without any problems with this combination of item category / account assignment which is pretty confusing, Is there an specific step for RFQ somewhere ?
    Thks for your feedback !
    Olivier

    Hi
    Check the configuration in the following menu path:
    IMG - MM - Purchasing - RFQ/Quotation - Define document types
    Check the item categories allowed & then select the item category D & check whether you have combination of PR with item category defined.
    Other than this I do not think there is any other specific combination.
    Remember that in RFQ you don't see the account assignment catgory.
    Regards
    Prasad

  • Error while posting GR- "Enter a material or an item category"

    Hi All,
    While posting GR for a HALB material, I am getting this error: " Enter a material or an item category"...I am not doing Inbound delivery ..please assist
    Surendra

    Dear Bhushan,
    Item category = blank means that you would like to purchase "normally" without any extra features (such as subcontracting).
    When you create the PO - SAP checks that the combination of item category and account-assignment-category exists. Could it be that from the time that you created the PO until you tried the MIGO - somebodey deleted the customizing for this item category - account assignment category ?
    If not, could you provide the table name that SAP sais the item category is not entered in ? ("item category is not entered in table *** " - what is *** ?)
    Best Regards,
    Isaac

  • There is no item category assigned to account 56010/ABC1(Chart of Accounts)

    Hi Gurus,
    I have activated the document splitting in the system and while posting a document the system showing the error No item Category could be determined for account 56010 in chart of accounts ABC1 and showing to assign item category
    what it mean exactly, where to assign item category
    what are the adavnatge by using this
    regards

    Please check in SM30 your implementing team must have created a Z Table to update the GL Account against Item Categor along with the material code.
    u have to maintain there.
    Regards,
    Alok

  • Service PO-Item category D and A/c assignment category K

    Hello all,
    I am novice in service procurement. Kindly help me understand this scenario.
    Client has created service PO with item category D and assignment category K.
    There is no service based IV or GR based IV clicked. If i see , services tab , in item details, it is totally blank. and in PO history, i can see all IR-L documents with 940 EUR as total, while the PO is for 1000 EUR.
    Limit shown in PO is 1000 EUR. Now if we go to MIRO screen, the system suggests remaining amount as 300 EUR instead of remaining 60 EUR.
    Kindly let me know your feedback on this.

    MIRO

  • CRM Service Ticket - Item Category error - IC Webclient

    Hi
    Once I confirm the customer account, I click on "Service Ticket".
    I'm getting the following error "No Item Category could be created". I've taken a look at a few of the Item Category Groups & Usages and none of them appear to be exactly related to a Service Ticket. I  believe this maybe the issue.
    Would anyone have some guidance on this.
    Points will be awarded for the right info.
    Many Thanks
    Arden

    Thanks Johnny
    Do you know if this resolves the issue with the creation of the Service Ticket or does it just make it easier to link the Header & Item Level attributes.
    Points awarded
    Regards
    Arden

  • Error :Inbound Delivery "No item category exists (Table T184L DIG NORM V )"

    Dear Guru's,
    When I try to create an inbound Delivery for an SA i am getting the following error "No item category exists (Table T184L DIG NORM V )" . My problem is, it suppose to look for Delivery Type: EL instead of DIG. I dont know why its look for DIG, can some one point where i am making the mistake?
    I am sure that i should be looking for Delivery Type : EL and Item Category : ELN (for Delivery)
    Please advice...
    Regards,
    Kumar

    Dear Kumar ,
    Please check the itemcategory determination for the delivery type DIG in 0184 transaction for combination.
    Delivert type+Norm -
    >Itemcategory
    For Example :- DIG + NORM---->DIGN
    I hope this will help you,
    Regards,
    Murali.

  • ITem category  error while creating sales order through

    Hi,
    I am trying to create a sales order through Bapi  and in between im getting the below error.
    ' Item category TAM is not defined for non material items'.
    Can anybody pls provide the solution for this.
    Thanks

    speak to your SD functional person.  The Error is pretty self explanatory; SAP is telling you that the item category for that order item is not permitted by your SD configuration.

Maybe you are looking for

  • Block access to Mail

    Hi, How block to access the Mail? In the restriction in the general settings don't block access to mail. tks

  • VPC Auto-recovery Feature

    Hi, all I understood vPC auto-recovery feature as the following but are they correct? vPC auto-recovery becomes effective command only when vPC role is secondary. In order to change to secondary state, a pair of vPC devices need synchronize. Even if

  • VPC Loses my pcs TWICE! Why? Unable to "migrate" pc (greyed out) How to?

    Using VPC 7.02. Installed WIN 2000 and crashed once for reasons unknown. Reinstalled WIN 2k and somehow the PC disappeared from the VPC list! (after running well for about 1 month.) Only thing I can think was that it may have happened when booting fr

  • Prefix for Hierarchies

    I cannot change prefix for hierarchies in dimension properties, when I select some Hierarchy, change prefix to some other letter(s), click update, and reselect Hierarchy to view it updated, i always get dimension prefix ! This happens also during cre

  • Tcodes that need to run in inbound

    hi ppl,         I have sent all the materials using bd10.after that i run we05/we02 and everything is in green signal ie no any error.So what all the things i need to do in the other end.i.e for inbound.Please provide me the  step by step tcodes with