Error printing : Tree connect failed (NT_STATUS_DUPLICATE_NAME)
We have a Kyocera printer that uses a queue on Windows server of Equitrac.
To configure the printer perform the following configuration in system preferences:
Printer and fax
Add a printer "+"
Customize Toolbar
Add the Advanced Menu
Select Type: Windows
URL: smb: / / user: password @SECTORIALES/128.90.249/kyoceraMAC
Select your printer model
Macs are not in domain. Each time we need to change the password we have to delete the printer and recreate it.
But we fail message:
Tree connect failed (NT_STATUS_DUPLICATE_NAME)
I need help
Please.
Jorge
Your syntax looks incorrect. If you are using the IP address of the Windows print server (which also appears to be incorrect but I suspect that is just a typo) then you also don't need the domain name - which I assume is SECTORIALES. If this name is the computer name then you don't need the IP address and the computer name - just one of them is sufficient.
So the URL should be
smb://user:password@IP_address/share_name
Similar Messages
-
I've updated to FF26 and get the follow error message "Secure Connection Failed" why is that?
ever since I've updated to FF26 some of the sites won't come up and show the following error message:
Secure Connection Failed
An error occurred during a connection to www.facebook.com. SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
it does not happens all the time but most of the times.
this also occurs on google.com, twitter.com and many more.
what to do?Do you have the option to turn off the feature of Kaspersky scanning your SSL traffic? Usually that can be turned off (e.g., in ESET and BitDefender).
-
0n hp m276nw error printer cannot connect the server
i am trying to set up scan to email every time i go through the proses at the end i get this message on hp m276nw error (printer cannot connect the server) i put the out going email in then i put in the printer port and server number in when i do the test it says error printer cannot connect the server any help will be well come
Hello youssi,
Welcome to the HP Forums!
I understand when you scan to email you're receiving a message stating cannot connect to server. I will do my best to assist you! Please follow this entire HP document on How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) just to make sure everything is correct.
If this doesn't work, then please follow these steps to try setting an alternative DNS to see if that resolves the issue:
• Open the Embedded Web Sever on your computer.
• Click the Network tab.
• Under Wireless click on IPv4.
• Under DNS Address Configuration select Manual.
• Set the Preferred address as 8.8.8.8
• Set the Alternate address as 8.8.4.4
• Click Apply twice to confirm the change.
• Turn the printer Off and back On and see if the issue is resolved.
Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP. -
Remote Speaker (AirTunes) Error - "the network connection failed"
I am getting a strange error message when I try to stream music through an AirTunes remote speaker. iTunes tells me this:
*An error occurred while connecting to the remote speaker "NN". The network connection failed.*
I can't say what has changed for this error to occur. Last time I used the system it worked fine, now it doesn't. I do know I have upgraded iTunes a couple of times since, though.
I am connecting to an 802.11g AirPort Express running firmware version 6.3.
Both our computers (MacBook & MacBook Pro) run Mac OS version 10.5.8.
In my system, the AirPort Express functions solely as a wireless speaker client, as the WLAN network itself is based around an 802.11n AirPort Extreme.
The AP shows a green light, and reports no problems in AP Utility.
When I change the device's "iTunes Speaker Password" setting in AP Utility, iTunes in both our computers immediately reflect the change, so apparently the various parts in the system do speak to one another just fine. They just can't transmit music, for some reason...
Anyone have any idea what might be going on, here?I have a similar problem. I use AE(g) with a Powerbook G4 and always get this error, which kind of bugs me, since all the settings appear to be correct. Unlike you though, I didn't make it work, not a single time — closing lid, opening and closing iTunes, resetting AE, yet no luck. Tried it all only with current versions of software.
However, the AE does sense when I unplug the speakers, since it first says "no speakers found", and then "the network connection failed". Strange is that the error has no number, nor does Console provide any clues. Sometimes it is pretty annoying when OS X just says "error". What error, where, why... Feels like good ol' windows times.
Update: Whoa, looks like we're not alone here. http://discussions.apple.com/thread.jspa?threadID=2154052&start=0&tstart=0
http://www.ilounge.com/index.php/news/comments/itunes-9-causing-airtunes-connect ion-problems/
Message was edited by: tochka -
I have been a long time Firefox user and this is the first time I am truly baffled. Now if I try to log into gmail or any google account on my main PC I just get an error message as below.
Secure Connection Failed
An error occurred during a connection to accounts.google.com. security library: improperly formatted DER-encoded message. (Error code: sec_error_bad_der)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
I have tried reinstalling, clearing cache, clearing cookies, and just about every other thing I can think of but to no avail. I can access through IE and also via firefox on my other PCs but no joy on my main PC. Please help as this one is stumping me.
Many thanks for your help.Sorry I forgot to add my system is Win 7 64 home premium
-
Discoverer Gatekeeper Error/Widearea network connection failed
Have installed vision (WINDOWS) and configured discoverer plus. It works fine from the local machine(server itself) and am able to run the reports.
When i try to connect to Discoverer plus remotely it comes to a point where it keeps loading the applet and finally throws error "gatekeeper connection failed"/"wide area network connection failed" falied to connect to locator.
I have opened the ports 10000/1538/1548/443.... along with the other ports where i am able to login into applications.
Please let me know what other ports need to be opened? How to fix this issue so that i can connect remotely and run the discoverer reports.
Thanks...Rajalso ran chkdiscoverer.bat here is what i see:
Looks like gatekeeper is not running. the registry variable is already set but gatekeeper is not running.
CheckDiscoverer: Version 4.1.48.00 on 5/27/08 7:47 PM
Initializing ORB...
ORB initialized successfully.
Checking for OSAgent...
Found OSAgent.
Checking for OAD...
OAD is running.
Checking for Discoverer Preferences component...
Discoverer Preferences component is registered with OAD.
Checking for Discoverer Server...
Discoverer Server is registered with OAD.
Binding to Discoverer Server...
Successfully bound to Discoverer Server.
Checking for Discoverer Locator...
4.1.20
Found Discoverer Locator.
Binding to Discoverer Server using Discoverer Locator...
Successfully bound to Discoverer Server.
Checking for Gatekeeper...
file:/C:\OracleApps\sionora\iAS\Apache\Apache\htdocs\discwb4\applet\gatekeeper.ior
WARNING: Attempting to use HTTP Firewall Proxy Server
due to security restrictions: org.omg.CORBA.INTERNAL[completed=MAYBE, reason=Can not find G
ateKeeper: org.omg.CORBA.NO_IMPLEMENT[completed=MAYBE]]
Error: Gatekeeper is not running. Clients outside the firewall will not be able to connect.
Hint: Open the HKEY_LOCAL_MACHINE/Software/Oracle Windows Registry key and make sure that the DCW4_S
TART_GATEKEEPER variable is set to 1, and then restart the Discoverer Services. -
Itunes unknown error 0x80090330 store connection failed
Everything else is fine except the secure connection to the store it says it's not enbled but it is and I am an administrator and I am running a anit virus software Kaspersky. This problem has been going on for months didn't care before but now I want this fixed. I really need help with this.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
LENOVO Lenovo IdeaPad N586
iTunes 11.1.4.62
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.0.32
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.4
iTunes Serial Number 0024BB4801177538
Current user is not an administrator.
The current local date and time is 2014-02-06 15:35:16.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD Radeon HD 7520G
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.4.62 (x64) is currently running.
iTunesHelper 11.1.4.62 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {CA5E1C16-48B1-4E5F-964A-ECE2AA1DE142}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {838962CE-19B3-446A-B518-94E7D62A402F}
Description: Broadcom 802.11n Network Adapter
IP Address: 10.0.0.4
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
DHCP Enabled: Yes
DHCP Server: 10.0.0.1
Lease Obtained: Thu Feb 06 14:39:16 2014
Lease Expires: Thu Feb 13 14:39:16 2014
DNS Servers: 75.75.75.75
75.75.76.76
Adapter Name: {5594B638-A907-44E5-B4D5-8280BFF4317D}
Description: Realtek PCIe GBE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
An unknown error occurred (0x80090330).
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-12 23:16:06.Hello DarkAzriel,
I found a few articles that might help with the issue you are experiencing with the iTunes Store.
If you are getting a white screen when accessing the iTunes Store, I recommend reviewing this article:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
If you are still not able to access the store or are getting a different error than just a white screen, I recommend the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Error Code (0012) connection failed R3trans
Hi Expertise,
I am getting error (0012) while executing command R3trans -d for connecting database to sap. Here, I am sharing db2daig.log. please advice me how could i resolve it. This is a new installation & no data is there. All the services are running & working. I can able to access only database thorough command level when executing command connect to database but sap instance stopped within 10 mint.
SAP: ECC6
Database : DB2 9.7
Regards
AbhijitHi,
Thanks for giving quick response & shared trns.log and dev_w0 log.
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.03.2014 - 21:06:09
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Mar 24 21:06:12 2014 1001 0.001001
4 ETW000 [dev trc ,00000] db_con_init called 84 0.001085
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 235 0.001320
4 ETW000 [dev trc ,00000] Loading DB library 'dbdb6slib.dll' ... 68 0.001388
4 ETW000 [dev trc ,00000] load shared library (dbdb6slib.dll), hdl 0 74322 0.075710
4 ETW000 [dev trc ,00000] using "D:\usr\sap\SAN\SYS\exe\uc\NTAMD64\dbdb6slib.dll"
4 ETW000 24 0.075734
4 ETW000 [dev trc ,00000] Library 'dbdb6slib.dll' loaded 8 0.075742
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbdb6slib.dll
4 ETW000 19 0.075761
4 ETW000 [dev trc ,00000] Version of 'dbdb6slib.dll' is "700.08", patchlevel (0.52)
4 ETW000 296197 0.371958
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbdb6slib.dll
4 ETW000 36 0.371994
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbdb6slib.dll
4 ETW000 25 0.372019
4 ETW000 [dev trc ,00000] New connection 0 created 570 0.372589
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.372629
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 30 0.372659
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.372671
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.372685
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 22202 0.394887
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 13 0.394900
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 32 0.394932
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 7 0.394939
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 15 0.394954
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 9 0.394963
4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000 11 0.394974
4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000 78 0.395052
4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000 37 0.395089
4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000 15 0.395104
4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000 14 0.395118
4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 10 0.395128
4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 15 0.395143
4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000 14 0.395157
4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 886231)
4 ETW000 9 0.395166
4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000 10 0.395176
4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000 14 0.395190
4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000 13 0.395203
4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000 11 0.395214
4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000 14 0.395228
4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000 15 0.395243
4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000 14 0.395257
4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000 14 0.395271
4 ETW000 [dev trc ,00000] Supported features: 6 0.395277
4 ETW000 [dev trc ,00000] - CLI LOAD for INSERT ... FULLSELECT 7 0.395284
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 6 0.395290
4 ETW000 [dev trc ,00000] ..done 284 0.395574
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 7 0.395581
4 ETW000 [dev trc ,00000] Mon Mar 24 21:06:13 2014 1229962 1.625543
4 ETW000 [dev trc ,00000] DB2 client driver version '09.07.0009' 49 1.625592
4 ETW000 [dev trc ,00000] Connected to DB2 version '09.07.0009' 44 1.625636
4 ETW000 [dev trc ,00000] Code page check canceled on this server ( sqlfxdb: rc= -1013 ) -> to be ignored
4 ETW000 11924 1.637560
4 ETW000 [dev trc ,00000] *** ERROR in ExecuteDirect[dbdb6.c, 5148] (BEGIN)
4 ETW000 169670 1.807230
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLExecDirect ): [IBM][CLI Driver][LU62SPM] SQL30070N "Unsupported function for SPMDB connect" Co
4 ETW000 18 1.807248
4 ETW000 [dev trc ,00000] &+ mmand is not supported. SQLSTATE=58014
4 ETW000 14 1.807262
4 ETW000 [dev trc ,00000] &+
4 ETW000 13 1.807275
4 ETW000 [dev trc ,00000] &+ SET CURRENT SCHEMA 'SAPSAN' -- SYSTEM( SAN , SAPSAN )
4 ETW000 14 1.807289
4 ETW000 [dev trc ,00000] &+
4 ETW000 14 1.807303
4 ETW000 [dev trc ,00000] &+
4 ETW000 13 1.807316
4 ETW000 [dev trc ,00000] *** ERROR in ExecuteDirect[dbdb6.c, 5148] (END) 8 1.807324
4 ETW000 [dev trc ,00000] Mon Mar 24 21:06:14 2014 155502 1.962826
4 ETW000 [dev trc ,00000] *** ERROR in prepareStatement[dbdb6.c, 10607] (BEGIN)
4 ETW000 22 1.962848
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLExtendedPrepare ): [IBM][CLI Driver][LU62SPM] SQL30070N "Unsupported function for SPMDB connec
4 ETW000 15 1.962863
4 ETW000 [dev trc ,00000] &+ t" Command is not supported. SQLSTATE=58014
4 ETW000 13 1.962876
4 ETW000 [dev trc ,00000] &+
4 ETW000 13 1.962889
4 ETW000 [dev trc ,00000] &+ SELECT COUNT(*) FROM TABLE( REG_LIST_VARIABLES() ) AS X WHERE REG_VAR_NAME = 'DB2_WORKLOAD' AND UPPER( REG_VAR_VA
4 ETW000 14 1.962903
4 ETW000 [dev trc ,00000] &+ LUE ) = 'SAP'
4 ETW000 13 1.962916
4 ETW000 [dev trc ,00000] &+ cursor type=NO_HOLD, isolation=UR, cc_release=NO, optlevel=5, degree=0, buffer_lobs=YES, op_type=40, reopt=0
4 ETW000 17 1.962933
4 ETW000 [dev trc ,00000] &+
4 ETW000 14 1.962947
4 ETW000 [dev trc ,00000] &+
4 ETW000 13 1.962960
4 ETW000 [dev trc ,00000] *** ERROR in prepareStatement[dbdb6.c, 10607] (END)
4 ETW000 55 1.963015
4 ETW000 [dev trc ,00000] Could not check DB2 registry settings. 22 1.963037
4 ETW000 [dev trc ,00000] disconnected from 'ECC', con_hdl=0 10358 1.973395
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'ECC'"
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Sun Mar 23 16:44:28 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\SAN\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'D:\usr\sap\SAN\DVEBMGS00\exe\dbdb6slib.dll' loaded
B
B Sun Mar 23 16:44:29 2014
B Version of 'D:\usr\sap\SAN\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.52)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid SAN
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2188
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2188) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 12816 (1424)
M DpShMCreate: sizeof(tm_adm) 5217968 (25960)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1760)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F150050, size: 5901456)
M DpShMCreate: allocated sys_adm at 000000000F150050
M DpShMCreate: allocated wp_adm at 000000000F151EE0
M DpShMCreate: allocated tm_adm_list at 000000000F1550F0
M DpShMCreate: allocated tm_adm at 000000000F155150
M DpShMCreate: allocated wp_ca_adm at 000000000F64F000
M DpShMCreate: allocated appc_ca_adm at 000000000F654DC0
M DpShMCreate: allocated comm_adm at 000000000F656D00
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F6DD990
M DpShMCreate: allocated gw_adm at 000000000F6DDA10
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F6DDA40
M DpShMCreate: allocated wall_adm at 000000000F6DDA50
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sun Mar 23 16:44:30 2014
M ThInit: running on host ecc
M calling db_connect ...
C Registering callback for dynamic profile parameters
C
C Sun Mar 23 16:44:31 2014
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C
C Supported features:
C - CLI LOAD for INSERT ... FULLSELECT
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Sun Mar 23 16:44:32 2014
C DB2 client driver version '09.07.0009'
C Connected to DB2 version '09.07.0009'
C Code page check canceled on this server ( sqlfxdb: rc= -1013 ) -> to be ignored
C *** ERROR in ExecuteDirect[dbdb6.c, 5148] (BEGIN)
C &+ DbSlConnectDB6( SQLExecDirect ): [IBM][CLI Driver][LU62SPM] SQL30070N "Unsupported function for SPMDB connect" Co
C &+ mmand is not supported. SQLSTATE=58014
C &+
C &+ SET CURRENT SCHEMA 'SAPSAN' -- SYSTEM( SAN , SAPSAN )
C &+
C *** ERROR in ExecuteDirect[dbdb6.c, 5148] (END)
C *** ERROR in prepareStatement[dbdb6.c, 10607] (BEGIN)
C &+ DbSlConnectDB6( SQLExtendedPrepare ): [IBM][CLI Driver][LU62SPM] SQL30070N "Unsupported function for SPMDB connec
C &+ t" Command is not supported. SQLSTATE=58014
C &+
C &+ SELECT COUNT(*) FROM TABLE( REG_LIST_VARIABLES() ) AS X WHERE REG_VAR_NAME = 'DB2_WORKLOAD' AND UPPER( REG_VAR_VA
C &+ LUE ) = 'SAP'
C &+ cursor type=NO_HOLD, isolation=UR, cc_release=NO, optlevel=5, degree=0, buffer_lobs=YES, op_type=40, reopt=0
C &+
C *** ERROR in prepareStatement[dbdb6.c, 10607] (END)
C Could not check DB2 registry settings.
C disconnected from 'ECC', con_hdl=0
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ecc_SAN_00 on host ecc (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sun Mar 23 16:44:32 2014
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2188) [dpnttool.c 327]
Regards
Abhijit -
File To Proxy Error ICM HTTP CONNECTION FAILED
Dear All ,
Iam Doing File to Proxy Scenario.
XML File is picked by XI Adapter is Properly and if i go and Check in SXMB_MONI,
It is Showing Status is Scheduled for outbound processing and if i see in Que Status is stop with red symbal .If I Click on QueueID it is opening the inbound qRFC Monitoring ,there if click on Queue Name it is showing Status :SYSFAIL,If I Click on SYSFAIL it is Showing the XI Error CLIENT_RECIVE_FAILED.INTERNAL:Que Stop, If I Click on QueueName it is showing while Executing the Functiomodule SXMS_ASYNC_EXE It is having prob i thik showin Error Text :CLIENT_RECIVE_FAILED.INTERNAL:Que Stop,If I Click on Quename it is showing a program RSXMB_SELECT_MESSSAGES is Similar to our SXMB_MONI ,here it is showing the Status Falg Red ,If I Click on that message it is opening the pipeline steps , here while calling Adapter Showing red symbal giving the Error Message ICM_HTTP_CONNECTION_FAILED
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please help me its urgent.
Regards
Kumarhi
This is the problem relleated to the HTTP connections, since using the proxy theXML travels to the destination, on your receiveing system make sure HTTP service are active.
in R/3 run this report :SPROX_CHECK_HTTP_COMMUNICATION you will get the error then proceed with the below steps to fix it.
YOur HTTP seriveces on the R/3 have some problem.....
Goto SMICM>goto>servicess you should see the HTTP service running with the ABAP port entry, if this is up then check
SICF--->press f2 you should not have any proxy check there.....
if these are fine then problem is with the Sproxy configuration........ -
Every then and now I get this error message while doing a research on google, or switching my search from web to search. Is the problem actually with google or firefox, because when this occurs I simply go to yahoo. It would actually be great if this error message quit showing up, either you guys call google and try to have this fixed or talk to your guys to fix this error. I don't understand why it's showing up when i'm already doing a search and write something else to research.
Thanks for reading this and understanding the frustration
-ChrisHello Chris,
This behaviour could be triggered by corrupt cookies and cache.
Follow the easy steps below to clear your browsing cookies and cache:
1. Tap the "menu" button and select "Settings"
2. Tap "Privacy" and choose "Clear private data"
3. Put a check mark next to the items you want to clear and then tap "Clear data"
Hope this helps! -
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
TP error: connect failed due to DbSL load lib failure
Hi All,
I have prepared Quality system from Production system as System copy.I have upgarded Kernel from 620 to 640 in Quality system.
After Kernel upgrade , Server details are as below
Operating System : windows 2003 IA 64
Database : SQL server 2000 IA 64
Kernel :640 and compiled for 64 bit non unicode system ,
patch number is 43.
SAP : SAP R/3 4.7
Before kernel upgrade , server details are as below
Operating System : windows 2000 server
Database : SQL server 2000
Kernel :620 and compiled for Non unicode system ,patch number
is 1363
SAP : SAP R/3 4.7
I am able to transport request from Development to Quality . But when I try to import request from Quality I am getting error message "Connect failed due to DBSL Load lib failure"
Error message is " connect failed due to DBSL load lib failure
cannot find the DLL dbmssslib.dll in path( K:\usr\sap\NBQ\SYS\exe\run)
problem when loading DB-dependent DLLs."
I have set Environmnet variable ( DBMS_TYPE value as mss) for nbqadm user.
I have seen that dbmssslib.dll file is exist in exe/run path.
Does anyone having an Idea , how to resolve this issue.Pls help me
Thanks in advance
Regards
VenuHi ,
Thanks for all
Issue is resolved by myself.
Instead of update Kernel to 640 , I have downloaded latest 620 kernel patch on IA 64 .
Since my production server is running on x86 and 620 kernel , i have downloaded 620 kernel for IA 64 .
That resolved my issue.
Regards
Sai -
Hello
I'm having troulbes accessing HP iLO with FF 36.0 on Ubuntu 14.04 LTS, getting the following error message:
====================================
Secure Connection Failed
An error occurred during a connection to 172.25.X.X. Issuer certificate is invalid. (Error code: sec_error_ca_cert_invalid)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
====================================
It seems to work with other browser such as Chromium, so the problem seems to be FF 36.0. Unfortunately, I don't have an "Add exception" button in FF that would allow me to bypass this warning.
I've already followed the following links:
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems
But I didn't managed to get it work. Any idea how to get it fixed?I have a better answer, upgrade to version 37 via bug 1138332
-
WM_User_Login_Event & Winsock connect () failed. errors
I am running zen 3 and up until the last week or so I have had no
problems registering my workstations in console one. But now I am
suddenly getting the following error message in the wsreg32.log file
when I try to register a new machine:
*****(1)***** 08/12/04 02:23:12 pm
WSREG-v3.0 This log file is reporting activity on a
WM_USER_LOGIN_EVENT event.
WSREG-v3.0 While contacting the Work Station Import Service, an error
-1 was encountered, and error description <Winsock connect() failed.>
was reported.
WSREG-v3.0 Registration will not occur for this event.
WSREG-v3.0 The program finished running.
When I look in console one the workstation is not registered.
I am using client 4.9 sp1a with the update on my workstations.
Any help will be appreciated.
Thanks,
SusanHi Susan,
- Have you checked if the Workstation Import service on the server is up
and running?
- Are you able to ping ZENWSIMPORT from the new machine? is it pointing to
the correct IP address (the import server)?
Hope this helps.
Andre
[email protected]
> I am running zen 3 and up until the last week or so I have had no
> problems registering my workstations in console one. But now I am
> suddenly getting the following error message in the wsreg32.log file
> when I try to register a new machine:
>
> *****(1)***** 08/12/04 02:23:12 pm
> WSREG-v3.0 This log file is reporting activity on a
> WM_USER_LOGIN_EVENT event.
> WSREG-v3.0 While contacting the Work Station Import Service, an error
> -1 was encountered, and error description <Winsock connect() failed.>
> was reported.
> WSREG-v3.0 Registration will not occur for this event.
> WSREG-v3.0 The program finished running.
>
> When I look in console one the workstation is not registered.
>
> I am using client 4.9 sp1a with the update on my workstations.
>
> Any help will be appreciated.
>
> Thanks,
> Susan -
Time Machine error: Connection Failed...
We just did a remodel that required me to take down all computers, internet, etc for a few days. Everything works (computers, internet, ooma, TV) now except Time Machine. This is the error I get: Connection Failed The server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again.
Time Machine Preferences shows accurate name, nothing (--) under Available, Oldest Backup and Latest Backup, but shows the time for Next Backup. The time changes after each non-backup but I never get the "Failed" designation under Latest Backup.
Any thoughts?
Much obliged!Go Mean Green wrote:
Much gracias, Pondini.
I am a neophyte, admittedly. Started looking for a Preferences section.
System Preferences > Time Machine; or click the TM icon in your menubar, or right-click the TM icon in your Dock, and select Open Time Machine Preferences.
The storage location for Time Machine backups can't be found.
That means Time Machine can't find your backups in the location where they used to be, probably as a result of re-configuring things. One of the things suggested earlier will probably fix that.
Very paranoid that I am even more stupid than already agreed upon.
Nope. Nobody was born knowing all this stuff!
Maybe you are looking for
-
10.4.5 Update Package fails to install
Hello, I've downloaded the 10.4.5 update (MacOSXUpdCombo10.4.5PPC.pkg) but it won't install. It gives errors during the process, then asks to try again. I had this problem with the 10.4.4 update as well. I'm still at 10.4.3. I have never had problems
-
Deltas do not get updated on R/3
Hi , We have R/3 4.6C here and recently it was observed that when the finance documents are posted they do not get updated either in SMQ1 or RSA7. I am a basis person and would like inputs from you on where to see why these are not getting updated
-
Do I use WebHelp to export my completed help files?
I have completed my new help files using roboHelp 7.0. They are ready to export. I have looked through the RoboHelp files, but am unclear what I need to do to export them. There is a file called WebHelp, but does it contain all of the help files I
-
I currently have a basic phone but I would like to switch to a smart phone. I don't have an upgrade right now and none of the other phones on the plan have an upgrade either (4 phones in total, 2 smart phones and 2 basic). Is it possible to get a pho
-
Bapi to create finance document for a customer
Hi , Can any one of you please tell me how to create a finance document of type(BLART ex: Z3) for a customer with the details customer number , invoice number, Billing date(baseline date) and a price value , G/L account number, Payment terms , Paym