Error reading virtual cube using listcube t code

Hi ,
I an trying to execute listcube t-code and get the data of the virtual cube , but it is giving me an error message :
     1)Exception 'CX_RSDAI_ACCESS_ERROR' caught
                2)Error reading the data of InfoProvider XXXXXinfoprovider
Request your suggestions to resolve this issue.
Thanks in advance

Hi,
Just to share some thoughts on virtual provider (VP), sometimes there are selection criteria that are not set as a required field but the VP needs it to successfully pull data.
For example if in case this is a VP is a planning area, you would always need to include the planning version value even if its not set as a required field in the selection screen.
You need also to put a check mark in all of the output fields before getting the result of your listcube.
Now, looking at your error this seems more of a auth issue of your ID on your source system.
Can you try pulling the data again then after you encounter this error run SU53 to check for any auth issue?
Hope this helps.
- jeff

Similar Messages

  • Error msg Z1019 when using MIRO 'Tax Code V4 cannot be used for Co Code'

    When trying to post an Invoice for an EU Vendor using MIRO we are getting an error message 'Tax code V4 cannot be used for Company Code &'.  Tax Code V4 is set up via FTXP as an input Tax Code 'Services within the EU' with EU code '5 - Input tax for services - VAT 2010'.  Any ideas or thoughts as to why this Tax code is not working as it should be in this scenario?
    Many thanks in advance for your help & assistance.

    Hi,
    it seems there is a validation raising message Z1 019.
    Go to transaction OB28 and check the existence of the validation.
    Best regards.

  • Investment mgt:Error while distributing budgets using IM52 transaction code

    I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52  transaction code in Investment management.
    Can you please tell me why and how to solve it?
    Edited by: aravind  reddy on Aug 19, 2008 4:34 PM

    I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52  transaction code in Investment management.
    Can you please tell me why and how to solve it?
    Edited by: aravind  reddy on Aug 19, 2008 4:34 PM

  • Error in Account Clear using the T Code F-03

    Dear Friends,
    The users are trying to clear the open items in one of the GL Accounts with multiple currencies, using the T Code F-03. However, while clearing the matching items, the system gives the error - "Exchange Rate Diff Accts are incomplete for account --- currency USD"
    Could you plesae advise and help where the error could be and how to resolve the same.
    Regards

    Check this thread
    [Re: Ex.rate diff.accts are incomplete for account 0000171202 currency AUD|Ex.rate diff.accts are incomplete for account 0000171202 currency AUD;
    thanks
    G. Lakshmipathi

  • Error reading excel file using POI.

    Hi ,
    I am having some problem when reading the excel file.
    While reading excel file I am getting error-java.io.IOException: Unable to read entire block; 4 bytes read; expected 512 bytes.
    part of my code:-
    InputStream stream = objFormFile.getInputStream();
    POIFSFileSystem fs = new POIFSFileSystem(stream);//getting above error here.
    HSSFWorkbook wb = new HSSFWorkbook(fs);
    Case 1:
    I download the file on the system ,save it ,and then directly upload it to the system ,I get the above error .
    Case 2:
    It works fine if I download the excel and manually open and save it and then upload it .
    I am using JDK1.4.1 and poi-2.5.1-final-20040804.jar.
    Can any one please help me out for the above problem?
    Edited by: hruday on Jul 31, 2008 3:20 AM

    Instead of using POIFSFileSystem, try to directly create the HSSFWorkbook
    InputStream stream = objFormFile.getInputStream();
    //POIFSFileSystem fs = new POIFSFileSystem( stream );//getting above error here.
    HSSFWorkbook wb = new HSSFWorkbook( stream );

  • Error while building cube using Relational Access Manager - URGENT

    When we try to build the Express Hybrid database using Relational Access Manager, We got the following error in the Windows NT Event log.
    "[159] XCA Interface - Exception C0000005 occurred in the XTLLISTN:ClientThread() function in the XWCXCA.DLL module"
    We are using Oracle Express 6.3.2 and Windows NT 4.0 Enterprise and Oracle 8.1.7
    Kindly Help
    Thanks & Regards
    ashish

    We are using Oracle Express 6.3.2 and Windows NT 4.0 Enterprise and Oracle 8.1.7
    -------------------------------------------------------------------------------- Unfortunately your configuration is not officially certified. You will want to upgrade to Express 6.3.2.1 in order to run against Oracle 8.1.7.
    Server Certifications for Windows NT 4.0:
    Express 6.3.2 with Oracle EE 8.1.6
    Express 6.3.2.1 with Oracle EE 8.1.7 & 9.0.1
    Express 6.3.4 with Oracle EE 8.1.7 & 9.0.1

  • Data source error  in r3 system using rsa1 t-code

    in quality  apo system we have qr3 Datasource when i check   i am getting this error ,The BW IDoc type ZSQD019 is not the same as the source system IDoc type ZSQD020     RSAR     371     
    and also i have  opend both the systems and try to restore data soure when i am doing restore i am getting Error in source system QP3400 Could you please suggest me how can i solve abouve error

    not answered but closing the thread.

  • Problems in Function Module of a Custom Virtual Cube

    Hi all,
    I have copied a Function Module-- RS_BCT_FIGL_DATA_GET_VC10 into a custom one ZRS_BCT_FIGL_DATA_GET_VC10. A custom Virtual Cube(ZFIGL_V10) was also created using this FM. The Function Module and Function Group are activated and there are no syntax errors in the custom FM.
    When I try to check data of this virtual cube using the T-CODE "listcube" it gives me the following errors.
    1. "An exception with the type CX_SY_DYN_CALL_ILLEGAL_FUNC occurred, but was neither handled locally, nor declared in a RAISING"
    2. "The function call failed; the function ZRS_BCT_FIGL_DATA_GET_V10 is either not activated or contains no code"
    Also some queries are not executing in this Virtual Cube.
    Could not figure out what the problem was.Can someone help me on this?
    Thanks
    Maddy

    HI,
    Can you check whether the FM is activated. Also check the function module group is activated or not. You can check the status of the same via SE80.
    Goto SE80 -> Select function grp -> give your function grp and press enter
    Double click on the below funtion grp to check status.
    Also expand FM and check whether it is activated.
    Also check the import and export parameters of the FM. Try to see whether there is any discrepancy.
    If any default values are specified, check whether they are correct.
    Also try to debug, put a breakpoint in your code and check whether it gets into the code or not.
    Regds,
    Shashank

  • Error reading data of virtual provider.

    Hi,
    I am receiving the below error message when reporting on a virtual provider/remote cube and unable to identify the root cause. Same error message is displayed when trying to view content of virtual provider/remote cube via listcube T-code or report created directly on remote cube or report created on a multiprovider which has this virtual provider.
    Error Message:
    An exception has occured
    Error in substep
    Error in substep
    Error reading the data of Infoprovider
    Thanks and Regards
    Vikram Reddy

    Hi Vishwa,
    The extraction checker on the data source in RSA3 in R3 is fine. Can you please ellobrate on how to check if the custom view on the table GLPCA is active or not.
    Just to clarify, below steps have a been successfully carried in R3 and BW:
    1. R3- Creation of view on table GLPCA
    2. R3- Creation of reconciliation direct access data source based on this view
    3. BW- Replication of this data source in BW and activation of data source.
    4. BW- Linked the virtual provider with the data source through transformation and created and activated a DTP process.
    5. BW- Context menu of the virtual provider and clicked on activate direct access and save the selection.
    After all these steps when i try reading data through the virtual provider, i the recieve the error msg.
    Thanks and Regards
    Vikram Reddy

  • Report issue on Virtual cube with services

    Hi,
    I'm following a how-to document to report on a virtual cube using a custom function module and everything seems to be OK except it is dumping at the following line which is included in the How To document "How Tou2026Implement a virtual InfoProvider with Services".
    Both <l_s_data> and E_T_DATA  are of same data types as discussed in the how-to document.
    append <l_s_data> to E_T_DATA
    These are the declarations which are same as HowTo document
    E_T_DATA TYPE  STANDARD TABLE
    FIELD-SYMBOLS: <l_s_data> TYPE ANY.
    Did any one face this issue. Greatly appreciate any insight into this issue. We are on BW 3.0B.
    the dump i'm getting is ...
    Data objects in a Unicode program are not convertible.
    Error analysis                                                                               
    The statement    "MOVE src TO dst"   requires the operands "dst" and "src" to be comvertible.                                                                             
    Since this statement occurs in a Unicode program, the special  convertibility rules for Unicode programs apply.
    Thanks,
    Hari Immadi
    http://immadi.com
    SEM BW Analyst

    Hi,
    In the debugging this is what I found out.. Any further insight?
    Virtual cube has only 1 characteristic Z_CRNUM & only 1 keyfigure Z_SR
    Report has only Z_CRNUM & Z_SR
    <L_S_DATA> has following record & value
    component      type     length     contents
    K____504     P     9     1.000
    S____504     C     18     16EA4D-R
    K____504 is the technical name of Z_SR in virtual provider.
    S____504 is the technical name of Z_CRNUM in virtual provider.
    E_T_DATA (type standard table) has following structure with a total of 5 fields.
    S____504    K____504           &KEYEND 1ROWCOUNT   Z_SR
    Regards
    Hari Immadi
    http://immadi.com
    SEM BW Analyst

  • Query on virtual cube showing incorrect values

    Experts,
    I have create a virtual cube on a base cube using services (info-source). both virtual as well base cube are z-development and are in BI.
    Base cube has 6 records, now when I check data in virtual cube using display data it shows correct values based on routine written in virtual cube transformation.
    Problem is when I created query on this virtual cube it doesnt show correct data or sometime no applicable data. After debugging I found, in end routine itself result package contains records with blank values in it on which I have written routine. But it does this only while executing query not when I display data in cube.
    Regards,
    Akshay

    Hi!!!
    And how do you solved it?

  • Error after transport of Virtual Cube with Services

    Hi All,
    would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
    A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
    Points would be rewarded appropriately.
    Cheers
    Noor

    Hi Noor,
    Check this link, it may help you.
    Re: Transport issue - Source system does not exist
    Regards,
    Vijay G.

  • What are the query errors can be rectified using trns code rsrt?

    Hi all,
    Can anyone let me know the sigifiance of trns code rsrt? with examples. Nor can anyone send me a documentation about rsrt describing its functions and significance.
    What are all the errors will be rectified using rsrt ?
    regds
    hari

    hi,
    RSRT : Query monitor to debug and test the queries. U can test IGS(internet Graphical Service) also.RSRT is to scan the query as to how the query gets executed, whether it uses aggregates or cubes, full table scan or uses index, etc.
    You can also change the performance of a query under the 'Properties' tab.
    If you switch the Read Mode to 'A' - 'Query to Read All Data at Once', it can really kill the query performance. Instead of reading data with each navigation, it reads it all before it loads. It will speed up navigation after the report has rendered, but kill the load time.
    The 'Generate Report' button can be used with the report has become corrupt. It will regenerate the report. It hasn't happened many times, but I've had reports that just failed to run when no change has been made. Regenerating the report fixed it.
    Execute + Debug is a lifesaver when you need to trace user exits in your report. It has a lot of neat options
    chk this link..
    http://help.sap.com/saphelp_nw04/helpdata/en/a0/2a183d30805c59e10000000a114084/content.htm
    hope it helps..

  • What is the use of Data packet dim with Virtual cube with services

    Hi Friends,
    Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
    Message was edited by: Pradeep choudhari

    Hi Maik,
    Unit dimension will not be created automatically until and unless you have keyfigure referning units..
    But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say??

  • Virtual Cube with Services FM Error

    Hi All,
    Am using Virtual Cube for Reporting Inventory data.
    Am moving Inventory data from a Cube to a Virtual Cube.
    As the Calculations of Inventory is done mostly in Queries am downloading the data from Inventory Cube through Function Module and passing this output to Virtual Cube through services of Function module .
    when i pass the Values to the Function Module Output Table
    e_t_data following errors occur:
    ASystem error in program SAPLRRK0 and form HIERA_AGGRE_SPID-01.
    Please help me out in this issue.
    Thanks in Advance
    Arun

    Hi Arun,
    Do you have aggregates on the original cube from which yur are pulling the data.
    I think this issue is becasue of the aggregates.
    just check it and try tp find how to import the aggregates if any there are.
    Thanks

Maybe you are looking for