Error:The navigator cannot handle the following request containing constant

Hi,
When i try to call a evaluate function using the 3 presentation variables(x,y,z),the report is showing the error as below.but when i tried to call some other function with one parameter it is working.Can anyone help me..
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14027] The navigator cannot handle the following request containing constants only: Evaluate( P_INPUT_VALIDATION(%1,%2,%3) as varchar2,'8633-/shelf=1/slot=6/port=23', 'Port', 'UII') as c1. (HY000)
SQL Issued: SELECT EVALUATE('P_INPUT_VALIDATION(%1,%2,%3) as varchar2','8633-/shelf=1/slot=6/port=23','Port','UII') saw_0 FROM inventorybrowsing WHERE EVALUATE('P_INPUT_VALIDATION(%1,%2,%3)','8633-/shelf=1/slot=6/port=23','Port','UII') = 'Y' ORDER BY saw_0
And the Evaluate function is like this - EVALUATE('P_INPUT_VALIDATION(%1,%2,%3) as varchar2','@{x}{8633-/shelf=1/slot=6/port=23}','@{y}{Port}','@{z}')
Can anyone help me..
Edited by: 883410 on Oct 15, 2011 1:43 AM

Hi,
Ensure, you add atleast one presentation column in your request along with the column containing Evaluate function.
Refer the below thread:
Using Evaluate function as columns source in Presentation services.
Thanks

Similar Messages

  • While Browsing SSAS 2005 Cube Getting Error " The following system error occurred from a call to GetOverlappedResult for Physical file: Logical file: '' : Insufficient system resources exist to complete the requested service."

    Hi Guys,
    When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
    TITLE: Microsoft SQL Server 2005 Analysis Services
    Server: The operation has been cancelled.
    The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
    system resources exist to complete the requested service. .
    The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
    system resources exist to complete the requested service. .
    BUTTONS:
    OK
    and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
    TITLE: Microsoft SQL Server 2005 Analysis Services
    File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
    BUTTONS:
    OK
    I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
    But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
    Anyone had similar issue. Could you please share your experience and resolution if any.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi Shiven,
    In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
    allow for any expansion to the SSAS memory space.
    To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
    cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
    How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
    Regards,
    Charlie Liao
    TechNet Community Support

  • Error The following product(s) could not be activated

    Can somebody help me, I received this error while I'm trying to activate the said product.
    NI Product Activation 
    Step 2: Review Your Confirmation 
    Error The following product(s) could not be activated 
    National Instruments is unable to provide activation codes for the following items in your request. Possible causes could include: serial number was not found; serial number was found, but does not match feature/version; serial number is found, but is not yet active. 
    Serial Number Product Version   
    xxxxxxxxx Vision Acquisition 8.6   
    Serial number is not found, is found but does not match feature/version, or is found but not yet active   

    Time to talk to NI.
    Sometimes corporate firewalls can cause problems with activations.

  • When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    What version of iPhoto?
    What colour profile is the shot?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Error: The following required field is missing from the launch file: jnlp

    PLEASE help me.
    I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I try to access www.bayphoto.com to download my application it says: (see below) (which I think is strange because it's all about Starbuck's and it should be my java code- I think...). Like I said - I have no idea what's going on or how to fix this. Please help me or at least tell me whom to call- I feel so stupid- I just need help- ATT? Starbuck's? Sun?
    Error: The following required field is missing from the launch file: <jnlp>
    Under the "exceptions" tab it says:
    MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
         at com.sun.javaws.jnl.XMLFormat.parse(XMLFormat.java:88)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:52)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:64)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:72)
         at com.sun.javaws.Launcher.updateFinalLaunchDesc(Launcher.java:214)
         at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:127)
         at com.sun.javaws.Launcher.launch(Launcher.java:95)
         at com.sun.javaws.Main.launchApp(Main.java:305)
         at com.sun.javaws.Main.continueInSecureThread(Main.java:213)
         at com.sun.javaws.Main$1.run(Main.java:108)
         at java.lang.Thread.run(Thread.java:613)
    Under the "launch file tab" it says:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
    <head>
    <title>AT&T Wi-Fi Service @ Starbucks</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="description" content="Starbucks Entertainment presented by AT&T Hotspot" />
    <meta name="keywords" content="AT&T, Starbucks, Wi-fi, Wifi, Hotspot, coffee, music, books, games, fresh sheet, third place, online" />
    <meta name="author" content="Starbucks Entertainment" />
    <link rel="shortcut icon" type="image/ico" href="/favicon.ico" />
    <script type="text/javascript" language="javascript" src="/dhtml/master.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_core.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_event.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_xhr.js"></script>
    <script type="text/javascript" src="/dhtml/att/dhtml.js"></script>
    <style type="text/css">
    copied from starbucks master.css
    body {
         background:#200D06 url("/graphics/att/themes/sbux/hotspot_bkgd.jpg") repeat-x scroll;
         color:#555555;
         font-family:Arial,Helvetica,sans-serif;
         font-size:small;
         line-height:1.5em;
         margin:0pt;
         padding:0pt;
         text-align:center;
    #wrap {
         font-size:95%;
         margin:0pt auto;
         text-align:left;
         width:980px;
    #starbucksframe {
         margin:15px 0pt 0pt;
         padding:0pt;
    /*our addendae*/
    div#header {
         height:95px;
         width:980px;
         background-image:url("/graphics/att/themes/sbux/header_bg.jpg");
         background-repeat:no-repeat;
         margin:0px;
         background-top:0px;
         background-left:0px;
         background-color:transparent;
    div#btn_ctti {
         position:absolute;
         top:10px;
         margin-left:388px;
    div#sbux_lfrm {
         display:inline;
         font-size:10px;
         color:#FFFFFF;
         margin-left:245px;
         top:49px;
         position:absolute;
         line-height:10px;
         font-family:verdana,arial,helvetica,sans-serif;
    div#sbux_lfrm form {
         margin:0px;
    div#sbux_lfrm a, div#sbux_lfrm a:link, div#sbux_lfrm a:hover, div#sbux_lfrm a:active, div#sbux_lfrm a:hover {
         color:#FFFFFF;
    div#sbux_lfrm form label {
         display:none;
         visibility:hidden;
    div#sbux_lfrm form input, div#sbux_lfrm form select {
         font-family:verdana,arial,helvetica,sans-serif;
         vertical-align:middle;
    div#sbux_lfrm input.example {
         color:#656565;
    #sbux_lfrm_row1, #sbux_lfrm_row2 {
         margin:0px;
    #sbux_lfrm input#username, #sbux_lfrm input#password, #sbux_lfrm input#password_pw {
         width:136px;
         margin-right:6px;
         font-size:10px;
    #sbux_lfrm select#roamRealm {
         width:130px;
         font-size:10px;
         color:#656565;
         margin-right:6px;
    #sbux_lfrm_row2 {
         position:absolute;
         top:21px;
         left:-4px;
    div#aupAgree_row {
         margin-top:4px;
         position:relative;
         left:-4px;
    div#aup_box {
         float:left;
         position:relative;
         top:-3px;
    div#aup_text {
         float:left;
         line-height:10px;
    div#tm_badge {
         width:115px;
         height:94px;
         float:right;
         margin-right:0px;
         margin-top:0px;
    div#password_value {
         display:inline;
    div#hidden_pw_field {
         display:none;
         visibility:hidden;
    div#sbux_lfrm.css_form {
         margin-top:0px;
    </style>
    <style>
    /* IE specs */
    body {
         font-size: x-small; /* IE5 Win */
         voice-family: "\"}\"";
         voice-family: inherit;
         font-size: small;
    html>body { /* be nice to Opera */
         font-size: small;
    /* self-clearing floats
    /* trigger hasLayout and target ie5+6/win only */
    *:first-child+html #header,
    *:first-child+html #login_wrapper {
         height:95px;
    #ny_legal {
         color:#CAC3BF;
         font-size:11px;
         font-weight:bold;
         padding:0;
    #ny_legal a:link {
         color:#CAC3BF;
         font-size:11px;
         font-weight:bold;
         padding:0;
    </style>
    </html>
    TOO LONG TO INCLUDE ALL CODE

    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp codebase="file:///C:\eclipse\workspace\studentconverter\webroot" href="studentconverter.jar" >two things wrong here -
    first codebase is not legal URL, File.separator (backslash on windows) needs to be converted to forward slash in URL's.
    second, the href is not to the jnlp file, it is to the jar !
    href="studentconverter.jar" - should this be href="studentconverter.jnlp" ?
    /Dietz

  • Teststand 3.5 deployment error: "Error: The following file(s) could not be copied:"

    I am trying to deploy a project in TestStand 3.5 and I am using LabVIEW 8.2.  When I build my project, I always get the following error message "Error: The following file(s) could not be copied:".  Then it lists about 20 VI's that it is apparently unable to copy.  The VI's listed appear to be randomly chosen from the 8 LabVIEW libraries I included in my TestStand workspace file.  What are the possible reasons that TestStand is unable to copy these VI's?
    As a side note, I have successfully mass compiled all the VI's without any errors.

    Hello Casey,
    I have created a new workspace from scratch with some simple VI's that demonstrate the issue.  Please look at the attached folder that includes the code and a text file of the build status log.  This log looks a little different from my original, but it still has the same error.  This code was generated in TestStand 3.5 and LabVIEW 8.2.1.
    It appears to give this error on (some) files that have a decimal point in the filename.  This error started occurring when I upgraded from LabVIEW 7.1 to 8.2.
    Thank you.
    Attachments:
    Test 1.zip ‏47 KB

  • Error "The propertyArray section contains a duplicate entry.."

    Hello,
    I'm trying to load a flat file into EPMA, but the system give me back the error:
    "The propertyArray section contains a duplicate entry;..."
    I correctly set the property IsPrimary...
    The error is only about shared elements.
    Could someone help me?
    Thanks
    Maurizio
    PS: I'm working on version 11.1.2 Planning

    Hi Jasmine and thank you for your answer...
    yes, I set the same alias for the primary member and for the shared member in the hierarchy section. I tried before, in other applications, to load metadata with shared members sharing the same alias with the primary member and it worked. Maybe this time i have made a mistake with the ADS file but i'm not able to find it out.
    The application is managed with Shared Library.When i load metadata in Shared Library, EPMA returns warnings, not error.
    Am i wrong or it is possibile to load shared member via ADS file with duplicated alias?
    I think these warnings don't allow me to deploy the application correctly.
    Thank you very much for your help.
    Maurizio

  • Getting error:the resource requested is nt available

    i m getting error :The requested resource is not available http 404
    i m calling a servlet from a form
    coding :
    <.... action="http://localhost:8084/WebApplication1/myServlet">
    servlet is running separately
    but nt invoked by html form
    please list out checklist
    netbeans 5.5.1 apache tomcat

    Vijay_Chaturvedi wrote:
    url pattern is
    <servlet-name>myservlet<\servletname>
    <urlpattern>/myservlet<\urlpattern>AFAIU, that leading '/' should have it resolve to the base of the site, so..
    http://localhost:8084/WebApplication1/myServlet..should be..
    http://localhost:8084/myservletWhy did you think it would accept the upper case 'S'?
    And while I'm here, shouldn't..
    <servlet-name>myservlet<\servletname>
    <urlpattern>/myservlet<\urlpattern>..be..
    <servlet-name>myservlet</servlet-name>
    <url-pattern>/myservlet</url-pattern>?
    It is no wonder it does not work as you expect. GI/GO. You might be well advised to run the rest of your XML through a [well formedness checker|http://pscode.org/xml/xmltools.html#xmlwfc], or better, an XML validation service - using a DTD or XSD.

  • Error: The following translators were not loaded due to errors: ASP.htm has information duplicated b

    Hi,
    Recently my computer had problems, I had to install Windows7 instead of Windows Vista. I made a clean installation of Dreamvers CS4. I was able to Export all the sites from my old computer. But whenever I try to open any file for editing I have this pop-up error message:
    The following translators were not loaded due to errors: ASP.htm has information duplicated by another translator.
    Same error for ASP.Net.htm, ColdFusion.htm, Date.htm, FlashObject.htm, ICERegions.htm, JSP.htm, PHP_MySQL.htm, Server Model SSH.htm, Spry.htm, SpryWidget.htm, XSLT.htm and XSLTransform.htm
    I saw several threads with similar error message, where the translators were invalid, while mine are duplicated by another translator. But I tried the fixes anyway.
    I tried removing Configure folder, and WinFileCache folder. Didn't help. I also tried to create a new site and get all the files from the remote. Same problem.
    Any help will be greatly appreciated.
    Valentina

    Sorry for the bump, but this post helped me solve a simmiliar issue: "The following translators were not loaded due to errors: ColdFusion.htm: has configuration information that is invalid" everytime I try open any document in dreamweaver. As I don't program in cold fusion, I renamed the file to ColdFusion.bck and everything works for me again. I'm not sure what caused the issue, but thanks for pointing out where I can find translator files.
    -Dreamweaver CS5.5, Windows7-64

  • I keep getting this error: "the following disk images couldn't be opened"?

    I just downloaded airparrot and keep getting this message everytime I try to open the .dmg file : the following disk images couldn't be opened.
    I have tried re-starting my computer and re-downloading the file several times. Airparrot has not gotten back to me despite several emails. I'm really frusterated and wondering if anyone has any suggestions?

    If itn won't open then it is a corrupted download.

  • ERROR: The Service Component Container is not running: Standalone Workflow

    We're trying to get the java notification mailer established through the OEM 10g Application Server Control. But the mail agent listener servlet container (WFALSNRSVC), and the mailer service servlet container (WFMLRSVC) are not running. Because of that, I cannot get any other parts of the mail configuration running. Note, I can successfully complete getting through the 8 steps of the "Workflow Notification Mailer" configuration (e.g. IMAP and SMTP mail accounts work fine and are accessible from the Workflow application server). What's the trick to getting the servlet containers running?? All I find in Oracle documentation is that these must be running before you can do anything, but I don't find anything on troubleshooting when they are not running.
    Thanks.

    Hi,
    I'm having the same problem as you did.
    I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
    And it showed
    An error has occurred!
    The Service Component Container is not running.
    Should I uninstall my Oracle Workflow?
    And install a new installation of Oracle Workflow?
    What does it mean by the "wfinstall"?
    Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
    Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
    Or should I uninstall all of my Oracle installation and start installing from the beginning?
    BTW, what if I don't use (or have) OID?
    Is it required?
    Any clue would be grateful.
    Thanks.
    Buntoro

  • Failure of the transport request containing queries

    Hi *,
    There was a transport request which after transport to Qual from Dev, failed with error code 8.
    Going into the details, the errors were:
    The request contained near about 100 queries in which some minor changes were done.
    1. Element 476FLGE6HWFAKXETNDSFCL12X is missing in version M
    2. Error when activating element 
       440YW0X722R9IRNUSMULSJCZH
    I can't figure out exactly where the error is. What should be my approach ? Also, I came to know that in Qual, some changes were already done by this request.
    Points will be assigned.
    Regards,
    Srinivas

    Hi Srinivas,
    Did you check that error in the table mentioned by our friend in the above post?
    If you still didn't find anything, go to Tcode SE09. Check Released and Modifiable and click on display. It will display all the released and non-released requests on your id. Go to your request and check all the objects transported. Find out if you have missed anything. transport the object you want with a new request. Check whether all the queries are moved into QAS in your previous transport and if any thisng is missed transport the same. You also can retransport if you want from the scratch. It will replace all the exeisting queries in QAS.
    Regards,
    KK.

  • How to set the following workflow container element

    In the below example i have created the following  field chgdocdat fieldnam in the workflow container in the initial value it is showing as <notset>
    but i want the value for initial value for field chgdocdat as 00.00.0000
    fieldnam as
    can any body help me

    hi koto,
    when u create a work flow element container.
    u have tye option to give the data type.
    there u u choose from dictonary, ie some date field from the data dictonory.
    after that in the 3rd tab it is initial value.
    click it and give 00.00.0000
    since it is date type no problem here.
    save it.
    thats all
    clarifiactions are welcome.
    pls reward points, if this helped u.
    regards,
    anversha.
    [email protected]

  • Error : The input field contains prohibited characters (already deleted)

    Hi,
    While trying to generate depreciation (Tcode AFAB), after select the Time of Print (either spool or immediate printing) this error will be displayed - "The input field contains prohibited characters (already deleted)", no error number displayed and the character ### appear in Time of Print.  I m not using any special characters and i was able to generate it before. Also the test run is successful.
    Please guide why this error is appear and what is the resolution for it.
    Thank you,
    Amalina

    Hi Amalina,
    Please see note 382285 solution part.
    Regards Bernhard

  • I am getting the following error " The following requirements should be met for the RD Session Host Servers in the collection"

    Hello All,
    I have a windows server 2012 R2 build 9600, I have installed all the required Terminal Services and configured a Session based collection. I have verified that all services are running including the RD Session Host  and I am using an Administrator account
    for the set up. All the terminal services are installed on a single server, Domain Controller is installed on a separate one.  
    When I try to add RemoteApp Application to the collection i get the error bellow::
    Can any one help solve this problem, I tried to trouble shoot  this with out success.
    Thank you.
    Ron

    Hi,
    Thank you for posting in Windows Server Forum.
    Does the RD server joined to domain or in workgroup mode?
    Are you trying to use RemoteApp?
    What’s your client OS and RDP version used?
    From your description there is issue with the installation and configuration of RD server. You can check the configuration part and follow the below link for rechecking all the steps. In addition to the steps you have performed, please see whether the user
    is member of “Remote desktop Users” local group.  Try with enterprise version on client system. 
    Step by Step Windows 2012 R2 Remote Desktop Services – Part 1
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Can't scan from my computer anymore with my c7180 all in one printer.

    I cannot scan anymore from my computer. Its listed in my scanners on the computer but when I push the scan button on my printer it says no device found. II reinstalled from the HP website but no luck. Is it because this computer has Vista?

  • How do I fix screen resolution after I synced with IPhone?

    I just purchased an IPad and have synced my apps & such from my IPhone thru ITunes. But now, all videos and apps are small like they are being viewed on they IPhone and I have tohit the (x2) button to get them to expand on the screen. BUT....whe this

  • Substitution strings in chart sql query

    Hi Guys, I am creating line charts and bar charts based on a query in HTML DB 1.5. I am using substitution strings in the query. Though I can use substitution strings in the line chart, I cannot do it in the bar chart. I am using almost the same sql

  • Dreamweaver Forms Submit button

    I can not get the submit button to work on the Forms page I built. Is it true that some special code is needed from the website server to put this all together and make it work? If so, why doesn't it tell you that somewhere in the Dreamweaver tools.

  • Reporting using web analysis

    Steps to transfer data from done on Hyperion planning Application to web analysis .