Error upgrading repository V4.2.01.01 to repository V04.03.02.04 for ODI11g

I am following bellow link's step to upgrade my repository(MSSQL Server 2005):
[ http://odiexperts.com/tag/repository ]
After completing Work Repository credential I am getting following error:
[2011-03-22T14:45:55.219+05:30] [ODI] [ERROR] [UPGCMP-00303] [upgrade.ODI] Target Work Repository ODI_WREP is invalid.
[2011-03-22T14:45:55.219+05:30] [ODI] [ERROR] [upgrade.ODI] Cause: Target Work Repositority wasn't found in the given schema. Action: Define valid Target Work Repository credentials.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [UPGAST-01008] [upgrade.FrameworkMR] Schema examination failed for Oracle Data Integrator.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [upgrade.FrameworkMR] Cause: Repository upgrade framework determined that the examination phase of upgrade failed for the named component. This is often due to a failed prerequisite check. No schemas changes have been made to the component that failed. Action: Check the upgrade log files for the cause of the message. Correct the source of the problem if possible, and retry the examination. Do not go on to perform an actual upgrade in upgrade mode unless all components succeed during examination.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [NOTIFICATION] [upgrade.FrameworkMR] failure_total 1 m_upgradeMode N
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [NOTIFICATION] [upgrade.FrameworkMR] failure_total 1 m_upgradeMode N
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [UPGAST-01015] [upgrade.FrameworkMR] Some repository upgrade component-specific software modules report failure.
[2011-03-22T14:45:55.219+05:30] [FrameworkMR] [ERROR] [upgrade.FrameworkMR] Cause: One or more component-specific software modules returned an error status during repository upgrade. Some other components might have upgraded successfully. Action: Review the upgrade logs to determine which components have failed, and pinpoint the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to rerun the upgrade.
[2011-03-22T14:45:55.219+05:30] [Framework] [NOTIFICATION] [upgrade.Framework] Finished examining components.
[2011-03-22T14:45:55.422+05:30] [FrameworkMR] [NOTIFICATION] [upgrade.FrameworkMR] finalize() instance 1 of 1
Please help out to solve this problem.
Thanks in Advance
Biswajit

I believe you are getting the error in Step No 6 . For the corresponding already existing Work repository you would need to provide the new database so that UA can use that to copy the settings .

Similar Messages

  • Runtime error: Creating a simple resource in a CM repository

    Hi All,
         I am trying to create a simple Resource & a collection in a CM repository without properties.
         <b>The list of my imports is as follows:</b>
    import com.sapportals.htmlb.event.Event;
    import com.sapportals.htmlb.page.DynPage;
    import com.sapportals.htmlb.page.PageException;
    import com.sapportals.portal.htmlb.page.JSPDynPage;
    import com.sapportals.portal.htmlb.page.PageProcessorComponent;
    import com.sapportals.portal.prt.component.IPortalComponentProfile;
    import com.sapportals.portal.prt.component.IPortalComponentRequest;
    import com.sapportals.wcm.repository.ICollection;
    import com.sapportals.wcm.repository.IResource;
    import com.sapportals.wcm.repository.IResourceContext;
    import com.sapportals.wcm.repository.ResourceContext;
    import com.sapportals.wcm.repository.ResourceFactory;
    import com.sapportals.wcm.util.uri.RID;
         <b>I have written the following code:</b>
         IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
         com.sapportals.portal.security.usermanagement.IUser user =
                   (com.sapportals.portal.security.usermanagement.IUser) request.getUser().getUser();
                   <b>/* This is as per KM - Java iView - User Authentication */</b>
         try {
              IResourceContext context = new ResourceContext(user);
              RID rid = RID.getRID("/documents/test");
              ICollection parent = (ICollection) ResourceFactory.getInstance().getResource(rid, context);
              IResource resource = parent.createResource("file", null, null);
               } catch (Exception e1) {
              // problem while retrieving the resource
         <b>I am getting a portal Runtime error. The following is its error log:</b>
    Exception ID:07:49_28/06/05_0002_3055650
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
         at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:921)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:803)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    <i><b>Caused by: java.lang.NoClassDefFoundError: com/sapportals/wcm/repository/IResourceContext</b></i>
         at com.satyam.dynpage.MyDynpage.getPage(MyDynpage.java:23)
         at com.sapportals.portal.htmlb.page.PageProcessorComponent.getPage(PageProcessorComponent.java:193)
         at com.sapportals.portal.htmlb.page.PageProcessorComponent.doOnNodeReady(PageProcessorComponent.java:62)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
         at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
         at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
         at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
         ... 21 more
    I don't know why am i getting an exception.
    Please help me in this regard.
    Thanks in advance.
    <b>Regards,
    Sai Krishna.</b>

    You need to put a sharing reference for "com.sap.km.application" in your portalapp.xml. Check out the following portalapp.xml. You can either put
    "com.sap.km.application" or "knowledgemanagement".
    <application>
      <application-config>
        <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.km.application"/>
      </application-config>
      <components>
        <component name="links_tree">
          <component-config>
            <property name="ClassName" value="com.ust.kmtree.display"/>
            <property name="SecurityZone" value="com.ust.kmtree/high_safety"/>
          </component-config>
          <component-profile>
            <property name="path" value="/documents/prakash"/>
            <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
          </component-profile>
        </component>
      </components>
      <services/>
    </application>

  • Error During Check In : Publish Course In Master Repository

    Hi Gurus,
    Here we are trying to publish one SCROM course through AE Tool,
    And while uploading course from local repository to master repository getting error 
    (A read/ write error occured when checking in object)
    As Master Repository we are using IIS WebDAV.
    Here, below is the error logs.
    ======================
    File does not exist: /SAP_REPORTING_COURSE/SAP Reporting Course/v1/Test_001.crs [rep=http://hostname.network.sbx:99/WBT/, type=7, props=null]
    java.io.FileNotFoundException: File does not exist: /SAP_REPORTING_COURSE/SAP Reporting Course/v1/Test_001.crs [rep=http://epasbx011.network.sbx:99/WBT/, type=7, props=null]
         at com.sap.hcm.ls.shared.repository.access.wdslide.WDRepository.readFile(WDRepository.java:707)
         at com.sap.hcm.ls.shared.repository.datautil.LinkControlManager.getObjectModel(LinkControlManager.java:185)
         at com.sap.hcm.ls.shared.repository.datautil.LinkControlManager.getObjectModel(LinkControlManager.java:168)
         at com.sap.hcm.ls.shared.repository.datautil.LinkControlManager.getObjectModel(LinkControlManager.java:147)
         at com.sap.hcm.ls.shared.repository.datautil.Depend.gatherContentDependencies(Depend.java:251)
         at com.sap.hcm.ls.shared.repository.datautil.Depend.getDependencies(Depend.java:185)
         at com.sap.hcm.ls.shared.repository.datautil.Depend.addDependingReuseObjects(Depend.java:552)
         at com.sap.hcm.ls.shared.repository.datautil.Depend.getDependingReuseObjects(Depend.java:541)
         at com.sap.hcm.ls.shared.repository.datautil.Depend.getDirectDependingReuseObjects(Depend.java:477)
         at com.sap.hcm.ls.shared.repository.exchange.PubData.generateDescription(PubData.java:129)
         at com.sap.hcm.ls.shared.repository.exchange.PubData.generateDescriptions(PubData.java:59)
         at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:239)
         at com.sap.hcm.ls.las.repository.explorer.checkin.ActionCheckIn$CheckInTask.<init>(ActionCheckIn.java:130)
         at com.sap.hcm.ls.las.repository.explorer.checkin.ActionCheckIn$1.construct(ActionCheckIn.java:85)
         at com.sap.hcm.ls.shared.util.swing.SwingWorker$2.run(SwingWorker.java:131)
         at java.lang.Thread.run(Thread.java:534)
    We do not have single sign on for CM.
    We are using different back-end user & cm user.
    Please suggest how to solve this issue.
    Thanks in advance.
    Sumanta

    Dear,
    we're pointing our content to an WebDAV-compliant server(IIS) instead of  KM of SAP Portal.  Authorization to that is working fine and when the check-in process start, it creating folders and we are getting the java errors, when AE is trying to check-in the actual content files. Error Screen shot below,
    Could you please let us know, what changes you have done from IIS side to successful check-in to the Master Repository and what is the system requirement to resolve this(I mean, version of AE and Java and IIS like that). it would be really appreciated, if you could share your views on this.
    Appreciate your kind response.
    Thanks and Regards
    Obli

  • REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.

    Hi Experts,
    I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
    Please help me soon to resolve this issue.
    Thanks in advance.
    Shreyansh

    Hi
    Goto main function group include name attributes tab and double click.
    once the include is opened, try to activate it. if shows errors then fix.
    regards
    Shiva

  • Error upgrading Hyper-V Server 2008 R2 to 2012: 0x80070490

    Hi everyone!
    As it is release day for Hyper-V Server 2012, I decided to go ahead and upgrade from Hyper-V Server 2008 R2.  However, I keep getting this error: 
    "Windows Setup cannot find a location to store temporary installation files.  To install Windows, make sure that a partition on your boot disk has at least 1198 megabytes (MB) of free space.
    Error code 0x80070490"
    I have over 20 gigs free on the boot volume, and tons more on my VHD volume, so I don't know why it's doing this.  I have shut down all VMs, there are no snapshots, nothing cluttering up my C: drive, and yes I've rebooted it several times.  I have
    also tried copying the installation DVD to a local volume and installing that way, but I keep getting the same error.  I know the quick solution would be to just format, reinstall clean, and pray that my VMs import into 2012 (which are already safely
    on another volume), but there has to be a reason this is happening.
    Any ideas?  :)  Thanks!

    Hello Vincent,
    I get the same error trying to upgrade my 2008R2 server to 2012. Here's my diskpart output for the partition (it's a mirrored partition):
    DISKPART> detail volume
      Disk ###  Status         Size     Free     Dyn  Gpt
      Disk 2    Online          298 GB  1024 KB   *
      Disk 1    Online          298 GB  1024 KB   *
    Read-only              : No
    Hidden                 : No
    No Default Drive Letter: No
    Shadow Copy            : No
    Offline                : No
    BitLocker Encrypted    : No
    Installable            : Yes
    Volume Capacity        :  297 GB
    Volume Free Space      :  268 GB
    Any suggestions?

  • Error Upgrade BW 7.01 to 7.3 in Phase DEPLOY_ONLINE_SHD_DM

    Hello,
    i have a problem by upgrading BW 7.01 to 7.3 in Phase DEPLOY_ONLINE_SHD_DM
    An error has occurred during the execution of the DEPLOY_ONLINE_SHD_DM phase.
    Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action. Deployment error. See log /usr/sap/TTW/upg/java/log/deploy_api.2.log for details. com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException. Reason: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_xappsanalyticsdm_par] failed com.sap.engine.services.dc.cm.deploy.DeploymentException: ASJ.dpl_dc.001085 Operation [deploy] of [sap.com_xappsanalyticsdm_par] failed com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3298] Operation [deploy] of [sap.com_xappsanalyticsdm_par] failed com.sap.engine.services.deploy.server.utils.DSRemoteException: ASJ.dpl_ds.006193 Operation [deploy] of [/usr/sap/TTW/upg/java/TTW/JC05/j2ee/cluster/server0/./temp/tcbldeploy_controller/archives/38/OPMFNDUI10_0-20004035_SCA1317900827022/DEPLOYARCHIVES/xappsanalyticsdm_par.sda] failed com.sap.engine.services.deploy.container.DeploymentException: Exception during deploy: par files are no longer supported. Please use the migration tools for migrating your file. com.sap.portal.prt.sapj2ee.deployment.PortalDeploymentException: par files are no longer supported. Please use the migration tools for migrating your file. at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.deploy(PortalRuntimeContainer.java:244) at com.sap.engine.services.deploy.server.utils.container.ContainerWrapper.deploy(ContainerWrapper.java:309) at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:519) at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:182) at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:203) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:473) at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1828) at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:358) at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:311) at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.deploy(ApplicationDeployer.java:139) at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:138) at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:57) at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:213) at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:67) at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:282) at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:84) at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:100) at com.sap.engine.services.dc.cm.deploy.impl.DeployThread.run(DeployThread.java:39) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
    Thanks
    Steven

    Steven Bier wrote:>
    >
    >H/38/OPMFNDUI10_0-20004035_SCA1317900827022/DEPLOYARCHIVES/xappsanalyticsdm_par.sda] failed >com.sap.engine.services.deploy.container.DeploymentException: Exception during deploy: par files are no longer supported. >Please use the migration tools for migrating your file. com.sap.portal.prt.sapj2ee.deployment.PortalDeploymentException: par >files are no longer supported. Please use the migration tools for migrating your file. at
    >
    >
    If you will check above logs then it is saying your parfile is not supported. Either you should migrate or un-deploy it and then upgrade.
    Thanks
    Sunny

  • Server 2012 In-place upgrade to 2012 R2 error. Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest updates

    Trying to upgrade server 2012 with RDS role on it, to server 2012 R2.
    It stays for a while on step "Collecting files, settings, and applications 0%"
    and then returns the error:
    Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest update
    Installed all the latest updates, rebooted, also tried to to run setup with local admin, still the same.
    Setup logs contain user profile related errors:
    [0x08039d] MIG    Cannot add mapping for user profile C:/Users/Administrator.001. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class
    UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]2014-08-17 03:30:13, Error      [0x080801] MIG    User profile loading error. Aborting
    due to external request.[gle=0x000000cb]

    I was able to get past "Collecting files, settings, and applications 0%" by disabling user profile disks, but then on reboot I got another error:
    Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
    Setuperr.log
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:34, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:37, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:40, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:01:44, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:11:43, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-08-17 04:11:46, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-08-17 04:15:12, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2014-08-17 04:15:23, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
    2014-08-17 04:15:23, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
    2014-08-17 08:52:44, Error                        Mig::CUpgradeTransportPlatform::SetUserContext: Offline platform failed to set the user context
    USER00000000[gle=0x000000cb]
    2014-08-17 08:52:44, Error                 MIG    Mig::CKnowledgeManager::BeginProcessingContext: Source platform failed to set the user context USER00000000[gle=0x000000cb]
    2014-08-17 08:52:44, Error                        MigApply caught exception: Win32Exception: Can't switch to requested user context: USER00000000.:
    A device attached to the system is not functioning. [0x0000001F] int __cdecl Mig::CKnowledgeManager::Apply(class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CUserMappingList *,class UnBCL::Hashtable<class UnBCL::String *,class
    UnBCL::String *> *,class Mig::CAgentManager *,struct IMigExecuteProgress *)[gle=0x000000cb]
    2014-08-17 08:52:44, Error                 MIG    pDoOnlineApply: Apply operation failed. Error: 0x00000004[gle=0x000000cb]
    2014-08-17 08:52:44, Error      [0x0802f5] MIG    CMediaManager::Close: m_pSelectedTransport->Close(1) failed with Exception Win32Exception: Device was open with readonly access.: Access is denied. [0x00000005] void
    __cdecl Mig::CMediaManager::CloseTransport(int)
    void __cdecl Mig::CUNCTransport::Close(int).[gle=0x000000cb]
    2014-08-17 08:52:44, Error                        MigCloseCurrentStore caught exception: Win32Exception: Device was open with readonly access.:
    Access is denied. [0x00000005] void __cdecl Mig::CMediaManager::CloseTransport(int)
    void __cdecl Mig::CUNCTransport::Close(int)[gle=0x000000cb]
    2014-08-17 08:52:47, Error                 MIG    Callback_ApplyNewSysMachineSpecific: Migration phase failed.

  • Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    This has been fixed.  Answer is that I needed to go to "Apple Software Update" and repair it.  (From my Control Panel).

  • Error upgrading company db from patch45 to 47

    Hello, Im having an error upgrading my company database to patch 47 from patch 45. while on the upgrade screen, I can see on the status bar that the upgrade process cannot find a "Department" object
    Ive done upgrades before with no problem, but this time I had to run it twice because the first time an error showed up that it couldnt upgrade the b1_share folder. 
    Here is the log file.
    UPG_DoObjectUpgradeInt 2, error in object index=124, object name=Departments, object ID=119
    STACK:
    Frame id=00: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02AD2460
    Frame id=01: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A1606
    Frame id=02: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A0322
    Frame id=03: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x028A029D
    Frame id=04: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x0289E2F4
    Frame id=05: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x02273CCA
    Frame id=06: "C:\Program Files\SAP\SAP Business One\SAP Business One.exe"; base=0x00400000, offset=0x029146C1
    Frame id=07: "C:\WINDOWS\system32\kernel32.dll"; base=0x7C800000, offset=0x7C80B50B
         C:\Program Files\SAP\SAP Business One\SAP Business One.exe     PID=3220     TID=256
    28/03/2009  13:10:19:443910        Upgrade            NoteLogAlways     FromVersion=800180     ToVersion=800181     Ending the company upgrade     C:\Program Files\SAP\SAP Business One\SAP Business One.exe     PID=3220     TID=1640

    Thank you for reply, I found out the reason, there was a record missing in the departments table (record num -2).... i dont know why... we added the record and then the upgrade proceeded as expected.
    Thank you.

  • Error upgrade Itunes for Ipod

    When I want to copy music files from my laptop to my IPod, I need to upgrade ITunes. When I want to upgrade ITunes I always get the error: Could not stop the IPod services (error 1603)
    I already tried to delete my ITunes version, but the same error massage appears.
    Can someone help me, cause right now I can't do anything with my IPod nano.
    Thx!!!

    +Could not stop the IPod services (error 1603)+
    1603 is an odd error message number to get with that message (usually it's a 1921 for could not stop, and a 1920 for could not start).
    Let's check to see if anything can stop the iPod service at the moment.
    Right-click "My Computer, and Select "Manage". Expand "Services and Applications" and click "Services". Maximise the window so you can see what's going on in there.
    Find the "iPod Service" entry, select it and click "Stop the Service" (up in the top left of the screen).
    Does the Service stop? If so, does an itunes install go through with it "pre-stopped" like that?
    If it doesn't stop, do you get an error message? If so, what does it say? (Include error message numbers if you're getting any.)

  • 10.1.4 Upgrade on an AMD Opteron 64bit metadata repository

    Hi,
    I have a Portal MDR on a 64bit AMD Opteron Linux RHEL 4 hardware. I would like to upgrade it to 10.1.4 from 10.1.2.0.2.
    The upgrade guide says the upgrade has to be run from the machine where the Portal repository is. But, I cant find a download for this hardware!
    Will the 64bit download for itanium work on my hardware?
    I have done a remote install of MRCA to load the repository from a 32bit machine
    Kindly help
    Thanks
    Vikas

    Hi,
    Just a few remarks about the versions which you are about to install :
    <li>Oracle Database (11.2.0.1) => should be at least 11.2.0.2 as 11.2.0.1 is not supported with RCU
    <li>Repository Creation Assistant (11.1.1.2.0) => take RCU version for 11.1.1.4 as it will create the 11.1.1.4 version of the repository for you
    <li>Weblogic (10.3.5) => you need 10.3.4 for IDM 11.1.1.4 andd PFRD 11.1.1.4
    <li>Identity Management (11.1.1.2.0) => if you are going to install WebLogic 10.3.5, you should install IDM 11.1.1.2 and patch it to 11.1.1.4 !
    <li>SSO metadata Repository Creator Assitant (10.1.4.3.1) => this is good, check Note 1069426.1 as it mentions some patches which need to be installed if you use a 11.2 database
    <li>Portal, Forms, Reports and Discoverer (11.1.1.2.0) => install patch set 11.1.1.4 on the software home before running the config !
    If you follow my recommendations, you will end up with the following software :
    <li>IDM 11.1.1.4 with SSO 10.1.4.3 associated with OID
    <li>PFRD 11.1.1.4
    You can use a single middleware home for all this software. Make sure to install Weblogic 10.3.4 as 10.3.5 is not supported with FMW 11.1.1.4 products. Also make sure to install the appropriate JDK before installing weblogic.
    Thanks,
    EJ

  • IPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 pr later for iTunes.

    iPad 3 and iPhone 4S won't synch with iTunes on Mac book pro. Error message says I need to have version 10.6.3 or later  for iTunes.  Mac iOS version 10.5.8 and iTunes on Mac is 10.6.1. iPad and iPhone version is 6.0(10A403). When I check for updates on the Mac book pro it says software versions are up to date.
    When I check for iTunes version  10.6.3 it looks like it is for snow leopard operating system which I am not on. How to I get my devices to sync with computer. Everything worked prior to iOS 6 upgrade on remote devices.

    I'm having the same problem.
    iPhone 4s won't sync with my Macbook Pro.
    I iust updated the iPhone to iOS6 (thought it wasn't syncing before the update either).
    Macbook Pro running Mac OS 10.5.8
    iTunes 10.6.3 (i.e. latest update - which hasn't had an issues apart from syncing).
    I tried 3 different USB sync cables. Still not syncing.
    Do I really have to update my Mac OS to 10.6.8 in order to sync my phone ? I thought as long as you have iTunes 10.6.3 you're ok...
    Is there a way to update to Mac OS 10.6.8 (or later) without wiping the hard drive and doing a new install?..
    thanks

  • I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

    I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

    Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
    That will take you to 10.6.3.
    If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
    SL system reqmts;

  • Repository Assistant fails: Unable to create repository

    Hi,
    I have a 10.2.0.4 database, OWB is installed in a separate Oracle Home (10.2.0.4). Both on the same server (RHEL).
    When trying to create the Repository using the Repository Assistant I receive the following error after ~5% of the installation:
    ORA-06575: Package or function SECURITY_PV_UTILITIES is in an invalid state. This happens during run of the secCreate.sql script. The installation aborts.
    I have seen other threads with the same problem but without any solution. (I cannot migrate to 11g)
    The installation is for a Runtime Repository.
    During the I selected
    - Advanced Setup
    - Creating the repository for a new user as repository owner
    One thing to mention is that during the setup the system does'nt find a 'compatible' Oracle Home. I entered the Oracle Home of the OWB installation which wasn't accepted. Therefore, I pressed the 'Skip'-option. I am not sure whether this is correct.
    Any suggestions?
    Thanks in advance.
    Reiner Kühl

    This is generally caused when something the package relies on is missing in the database.
    1. Drop cascade the following schemas :
    Repository Owner
    OWBRT_SYS user.
    2. Drop the following roles :
    OWBR_<repository owner>
    OWB_A_<repository owner>
    OWB_D_<repository owner>
    OWB_O_<repository owner>
    OWB_<repository owner>
    3. Restart the OWB Repository Assistant:
    a) Create a new Repository
    b) Create a new OWB Target Schema in your existing schema (or create a new target user)
    4. Connect in SQLPLUS as the repository owner and use the OWB_HOME/owb/rtp/sql/service_doctor.sql script to check the status of the Control Center Service.
    You can use "NOTE.340196.1 Data Collection Script for Oracle Warehouse Builder" to check the status of the OWB 10.2 environment. It will list invalid objects by schema and type. This script also has a use in your normal backup and recovery plans. It outputs the details of your locations. With that data and your MDL file, you can recreate a repository very quickly. The note is available on Metalink. There is also a note available for OWB 11.1, Note:454044.1

  • I can not upgrade S370 because RAID Firrmware update is necesary, but it is not for my RAID card

    Hi guys.
    When i trry to upgrade my Ironport S370 Web Security Appliance for AsyncOS 7.7.0 build 761 upgrade, by example, it said me thar Update RAID Firmware is necesary for it, but if i try to update this firmware, the system said me that it is not for my RAID card
    What can i do?
    This is the cli result for the upgrades:
    SFPPRXY1P.intranet.cajastur.es> upgrade 
    Upgrades available.
    1. AsyncOS 7.7.0 build 753 upgrade For Web, 2014-07-07
    2. AsyncOS 7.7.0 build 757 upgrade For Web, 2014-07-28
    3. AsyncOS 7.7.0 build 761 upgrade For Web, 2014-10-01
    4. AsyncOS 8.0.6 build 119 upgrade for Web, 2014-10-27,  is a release available for General Deployment
    5. Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)
    [5]> 5
    Performing an upgrade may require a reboot of the system after the upgrade is applied. You may log in again after this is done. Do
    you wish to proceed with the upgrade? [Y]> Y
    Upgrade not applicable to your RAID card
    Upgrade installation finished.
    SFPPRXY1P.intranet.cajastur.es> upgrade
    Upgrades available.
    1. AsyncOS 7.7.0 build 753 upgrade For Web, 2014-07-07
    2. AsyncOS 7.7.0 build 757 upgrade For Web, 2014-07-28
    3. AsyncOS 7.7.0 build 761 upgrade For Web, 2014-10-01
    4. AsyncOS 8.0.6 build 119 upgrade for Web, 2014-10-27,  is a release available for General Deployment
    5. Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)
    [5]> 4
    Performing an upgrade may require a reboot of the system after the upgrade is applied. You may log in again after this is done. Do
    you wish to proceed with the upgrade? [Y]> Y
    Removing stale lock file
    Note: A new firmware is required for your RAID controller before you can upgrade to the selected version of AsyncOS. This upgrade must be cancelled. Please first update the firmware by running a new upgrade and selecting 'Update for RAID controller firmware (For S360/S370/S660/S670 only, reboot required)'.
    Please refer to the release notes on http://www.cisco.com/en/US/products/ps10164/prod_release_notes_list.html for further details on the firmware update.
    The system upgrade failed. This could be the result of a network interruption or a more serious error.  If this problem persists,
    please contact customer support.
    SFPPRXY1P.intranet.cajastur.es> 
    Thanks

    Regarding 1st issue: it could be that new firmware is already installed.
    Look on page 3 of release notes (http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/RAID_controller_firmware_update/raid_firmware_upgrade_release_notes.pdf)
    After you run the firmware upgrade, the firmware upgrade package will display in the list of available upgrades even after a successful installation. The presence of this package does not indicate a failed upgrade.
    Step8
    To verify that the upgrade has run successfully, you can run the upgrade script again after the machine has rebooted. If the upgrade was successful, the upgrade script will indicate that the appliance does not require upgrading
    Regarding your second issue: upgrading software:
    - do you have internet connectivity to update servers (maybe check upstream proxy settings..)
    - what's your current software version running (did you check upgrade path)? maybe you need first to upgrade to 753 or some other version..
    - maybe reboot will solve the problem?

Maybe you are looking for

  • Apple tv screen saver

    Is there a way to play music through Apple Tv without a screen saver showing on the TV. I would like a perfectly blank TV screen while playing music.

  • Sample SD  reports in querry designer

    Hi, We want to see the sample SD report at queerry design.we mean that. We want to check out sd reports querry designer to see how it is creating? Any link ?we are really appretiated..

  • Change GL a/c assignment /4me,/4mh,/4mt & /4mein table

    Dear Experts, My clients want to change the GL a/c assignment of Technical WT /4me, /4mh, /4mt and /4me to another separate GL a/c. Is it possible to change the technical wage type GL a/c assignment? To defined GL a/c. Please kindly resolve my issue.

  • Content-Transfer-Encoding Header missing?

    Hello, our Exchange 2013 CU 6 won't send "Content-Transfer-Encoding" Header when sending Mails to external Domains. (This Header is present if Mail stays within our Org) Already tried to set different Encodings - but without luck ... Exchange just wo

  • Canon 50d

    I have a Canon 50d, I'm trying to find out hope to tell how many total shots or actuations my camera has taken?