Error when execute Load Plan

Dear all,
When I tried to execute the Load Plan , I get this error:
ODI-1551 the dbms_lock acquisition faild with sql exception
OR06550: ????1?????7.
PL00201: identifier 'DBMS_LOCK' must be declared.
OR06550: ????1?????7.
PL/SQL statement ignored.
Thank you,

The link as below maybe helpful
dbms lock must be declared

Similar Messages

Error when execute a planning function on selected line

Hello together,
we are using SAP BusinessObjects Analysis 1.4 SP9 (1.4.9.3241, Office 2013) and SAP BW 7.3 SP 11 (SAPKW73011).
When executing a planning function on an selected line in the crosstab, the following error appears:
The VBA Coding used is from HowTo Execute a Planning Function on Selected Lines in an Analysis for Office Workbook.
The Code worked fine with an older version of SAP BO Analysis and Excel 2007.
Going to debugging:
As you can see in the screenshot, the selected line (Dimension "0PRODUCT") is selected correctly.
The settings for the planning function are the following:
Thank you in advance for any advice.
Best regards
Alex

Hello together,
we are using SAP BusinessObjects Analysis 1.4 SP9 (1.4.9.3241, Office 2013) and SAP BW 7.3 SP 11 (SAPKW73011).
When executing a planning function on an selected line in the crosstab, the following error appears:
The VBA Coding used is from HowTo Execute a Planning Function on Selected Lines in an Analysis for Office Workbook.
The Code worked fine with an older version of SAP BO Analysis and Excel 2007.
Going to debugging:
As you can see in the screenshot, the selected line (Dimension "0PRODUCT") is selected correctly.
The settings for the planning function are the following:
Thank you in advance for any advice.
Best regards
Alex

[BIACM0085] Error executing load plan after reverting from LDAP to original security mechanism in BIA 11.1.1.7.1

We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
When we select (any) plan that was executed earlier, we get an error:
[BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
[BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
We already started a trace in WLS, but this does not help us further.
Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
Tx,
Luc

We have tried to change authenticaion of BI Apps 11.1.1.7.1 to LDAP, but reverted this due to some other issues. Now we are back with standard authentication, and all functionality seems to work fine, except execution of a load plan.
When we select (any) plan that was executed earlier, we get an error:
[BIACM0085] Error executing load plan. Action: Correct the properties selected or entered and retry.
[BIACM0080] Cause: Application error: MustUnderstand headers:[{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security] are not understood Action: Contact your help desk or system administrator.
According to one of our WLS gurus there is a mismatch between consumer and provider of a web service with a security policy, but we cannot find any difference between a working and this failing environment.
We already started a trace in WLS, but this does not help us further.
Any hints on troubleshooting steps or even better resolution are more than welcome, as this is blocking a new full load and further tests.
Tx,
Luc

Error when executing interface which load data from csv file which has 320

Hi,
Can some one provide a resolution for below error:
I have created an interface which load data from csv file which has 320 columns, to a Synonym which has 320 columns in it
using LKM File to SQL, IKM Sql Control Append.
I am getting below error when executing the interface :
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation. Task: 6 java.lang.Exception: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location> BSF info: Create external table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
 at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
 at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
 at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
 at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
 at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Sourced file: inline evaluation of: ``out.print("The application script threw an exception: java.lang.StringIndexOutOf . . . '' Token Parsing Error: Lexical error at line 2, column 42. Encountered: "\\" (92), after : "": <at unknown location>
BSF info: Create external table at line: 0 column: columnNo
 at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
 at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
 at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)
 ... 11 more
Text: The application script threw an exception: java.lang.StringIndexOutOfBoundsException: String index out of range: 2 BSF info: Create external table at line: 0 column: columnNo
out.print("createTblCmd = r\"\"\"\ncreate table ") ;
out.print(odiRef.getTable("L", "COLL_NAME", "W")) ;
out.print("<?=(extTabColFormat.getUseView())?\"_ET\":\"\"?>\n(\n\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
 "<?=extTabColFormat.getExtTabDataType(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022[DEST_WRI_DT]\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
 , ",\\n\\t", "","")) ;
out.print("\n)\nORGANIZATION EXTERNAL\n(\n\tTYPE ORACLE_LOADER\n\tDEFAULT DIRECTORY dat_dir\n\tACCESS PARAMETERS\n\t(\n\t\tRECORDS DELIMITED BY 0x'") ;
out.print(odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")) ;
out.print("'\n\t\t") ;
out.print(odiRef.getUserExit("EXT_CHARACTERSET")) ;
out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_STRING_SIZE")) ;
out.print("\n\t\tBADFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.bad'\n\t\tLOGFILE\t\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.log'\n\t\tDISCARDFILE\t'") ;
out.print(odiRef.getSrcTablesList("", "[RES_NAME]", "", "")) ;
out.print("_%a.dsc'\n\t\tSKIP \t\t") ;
out.print(odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")) ;
out.print("\n") ;
if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {out.print("\n\t\tFIELDS\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\tPOSITION([FILE_POS]:[FILE_END_POS])\\t"+
 "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
 , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
} else {out.print("\n\t\tFIELDS TERMINATED BY x'") ;
out.print(odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")) ;
out.print("'\n\t\t") ;
if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){out.print("\n\t\t") ;
} else {out.print("OPTIONALLY ENCLOSED BY '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)) ;
out.print("' AND '") ;
out.print(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)) ;
out.print("' ") ;
}out.print("\n\t\t") ;
out.print(odiRef.getUserExit("EXT_MISSING_FIELD")) ;
out.print("\n\t\t(\n\t\t\t") ;
out.print(odiRef.getColList("", "[CX_COL_NAME]\\t"+
 "<?=extTabColFormat.getExtTabFormat(\\u0022[CX_COL_NAME]\\u0022,\\u0022[SOURCE_DT]\\u0022, \\u0022DEST_WRI_DT\\u0022, \\u0022[COL_FORMAT]\\u0022, \\u0022[BYTES]\\u0022, \\u0022[LONGC]\\u0022, \\u0022[SCALE]\\u0022)?>"
 , ",\\n\\t\\t\\t", "","")) ;
out.print("\t\t\n\t\t)\n\t)\n") ;
}out.print("\tLOCATION (") ;
out.print(odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")) ;
out.print(")\n)\n") ;
out.print(odiRef.getUserExit("EXT_PARALLEL")) ;
out.print("\nREJECT LIMIT ") ;
out.print(odiRef.getUserExit("EXT_REJECT_LIMIT")) ;
out.print("\n\"\"\"\n \n# Create the statement\nmyStmt = myCon.createStatement()\n \n# Execute the trigger creation\nmyStmt.execute(createTblCmd)\n \nmyStmt.close()\nmyStmt = None\n \n# Commit, just in case\nmyCon.commit()") ;
****** ORIGINAL TEXT ******
createTblCmd = r"""
create table <%=odiRef.getTable("L", "COLL_NAME", "W")%><?=(extTabColFormat.getUseView())?"_ET":""?>
 <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
 "<?=extTabColFormat.getExtTabDataType(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022[DEST_WRI_DT]\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
 , ",\n\t", "","")%>
ORGANIZATION EXTERNAL
 TYPE ORACLE_LOADER
 DEFAULT DIRECTORY dat_dir
 ACCESS PARAMETERS
 RECORDS DELIMITED BY 0x'<%=odiRef.getSrcTablesList("[XFILE_SEP_ROW]","")%>'
 <%=odiRef.getUserExit("EXT_CHARACTERSET")%>
 <%=odiRef.getUserExit("EXT_STRING_SIZE")%>
 BADFILE '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.bad'
 LOGFILE '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.log'
 DISCARDFILE '<%=odiRef.getSrcTablesList("", "[RES_NAME]", "", "")%>_%a.dsc'
 SKIP <%=odiRef.getSrcTablesList("", "[FILE_FIRST_ROW]", "", "")%>
<% if (odiRef.getSrcTablesList("", "[FILE_FORMAT]", "", "").equals("F")) {%>
 FIELDS
 <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
 <%=odiRef.getColList("", "[CX_COL_NAME]\tPOSITION([FILE_POS]:[FILE_END_POS])\t"+
 "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
 , ",\n\t\t\t", "","")%>
<%} else {%>
 FIELDS TERMINATED BY x'<%=odiRef.getSrcTablesList("", "[XFILE_SEP_FIELD]", "", "")%>'
 <% if(odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").equals("")){%>
 <%} else {%>OPTIONALLY ENCLOSED BY '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(0,1)%>' AND '<%=odiRef.getSrcTablesList("", "[FILE_ENC_FIELD]", "", "").substring(1,2)%>' <%}%>
 <%=odiRef.getUserExit("EXT_MISSING_FIELD")%>
 <%=odiRef.getColList("", "[CX_COL_NAME]\t"+
 "<?=extTabColFormat.getExtTabFormat(\u0022[CX_COL_NAME]\u0022,\u0022[SOURCE_DT]\u0022, \u0022DEST_WRI_DT\u0022, \u0022[COL_FORMAT]\u0022, \u0022[BYTES]\u0022, \u0022[LONGC]\u0022, \u0022[SCALE]\u0022)?>"
 , ",\n\t\t\t", "","")%>
<%}%> LOCATION (<%=odiRef.getSrcTablesList("", "'[RES_NAME]'", "", "")%>)
<%=odiRef.getUserExit("EXT_PARALLEL")%>
REJECT LIMIT <%=odiRef.getUserExit("EXT_REJECT_LIMIT")%>
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit().
 at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
 at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
 at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
 at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
 at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
 at java.lang.Thread.run(Thread.java:662)

The issue is encountered because the text delimiter used in the source file did not consist of a pair of delimiters.
Please see support Note [ID 1469977.1] for details.

Error when executing planning application in Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Have you considered creating a characteristic relationship with an EXIT Class. In this way you are able to make the value whatever you want according to the rules you code.

Error when executing Planning function in BEx Web

Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.

Hi Geerts,
If i understood well, you have some problem with your query. Please check the query that you have on WAD and wich characteristics did you have on your level (the level on wich the query is based).
Pls, check the correct execution on that query on Query Designer too. That query is a plan query? it`s ready for input ?
Hope this help
Natalia.

FJS-00012 Error when executing script.

Folks, please i need help, i'm installing sap on oracle 9.2
SYSID CBT, this is SAP 4.71. It stops on the "creating or registering SAP Services (post processing)" phase, and inside the file SAPSTARTSRV.EXE.log it's just the word SERVICE NOT STARTED.
here is the error message
==========
Creating file K:\usr\sap\trans\bin\tpparam_instCBT.
PHASE 2011-03-14 18:41:36
Deal with services
PHASE 2011-03-14 18:41:36
Prepare dealing with SAP System services
INFO 2011-03-14 18:41:36
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:41:48
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:41:48
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:41:48
FJS-00012 Error when executing script.
INFO 2011-03-14 18:42:05
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:42:52
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:42:52
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:42:52
FJS-00012 Error when executing script.
INFO 2011-03-14 18:48:37
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:48:44
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:48:44
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:48:44
FJS-00012 Error when executing script.
=============
what can i do?
cheers.

Hi, i installed the vcredist_x86 patch but nothing happened. I'm running a windows 2000 advanced server on a virtual machine with 3 GB of RAM and a lot of space.
When i tried to start the services manually from service.exe it shows me the on windows eventviewer:
Initialization failed. Service not started. [ntservmain.cpp 1002]
and then
The dynamic link library librfc32.dll could not be loaded
And here is the message from the sapinst
***** Transaction begin ********************************************************
TRACE
Processing Row[0] WapsSystemName="CBT" WapsInstanceName="DVEBMGS00" WapsInstanceHost="SNGCBT1" Key="WAPS_SAPsidInstNum_Service" Program="K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE" ProgramArguments="-r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm" ArgumentSeparator=" " ProgramReturnCode="255"
TRACE
Copying file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log to: S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.12.log.
TRACE
Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.12.log.
TRACE
Removing file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log.
INFO 2011-03-15 14:47:21
Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-15 14:47:29
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2011-03-15 14:47:29
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
***** Transaction end **********************************************************
So Please can someone help me.
regards

Error when executing query without passing variable selection

Hi Gurus
I am getting an error while executing a query with out passing values for variables
When executing the query by passing the filter values report returns the data
When executing the query with out passing variable selections the error message is
Unknown error in SQL interface
Error reading the data of Info Provider ZCRM_O08
Error while reading data; navigation possible
System error in program SSAPLRS_EXCEPTION and form
RS_EXCEPTION_TO_MESSAGE
No Data Available
can any one please help me in resolving this
Thank you

Hi Srini
Thanks for your quick response
When i am executing the query with selection it is returning the data
giving error when executing with out passing the selection
is there any other cause for this problem
like any particular info object causes this sort of problem
Thank you

Webi report throwing error when executed

HI Experts,
While executing a Webi Report we are gettign following error when executing with more than one characteristics -
A Database error occured. The database eror text is : The MDX Query select { [Measures].[4225B1TBMEMOYKZGDKLVINMAW] } ON COLUMNS FROM [ZMEPSC01/ZMEPSC01_QRY_0001]
failed to execute with the error Unknown error.(WIS 10901).
We tried changing the Universe -> Parameter -> Control -> Limit size of result set to -> unchecked it.
But still the error remains. Can u put some light over it.
Thanks.

Hello ,
Just Check with the BI the people they might change the the column name or some thing else in the bex Query that s way It is showing error.
Refresh the universe and generate the report then check it.
Thanks
Santhosh V

Error when executing a .irpt page

Hi,
I am getting the below error when executing a .irpt from the workbench. I am on MII 12.2.2 Build (235).
404 Not Found
SAP NetWeaver Application Server 7.20 / AS Java 7.30
Error: S:usrsapALXJ10j2eeclusterappssap.comxappsxmiiearservlet_jspXMII
oot/XMII/CM/<Project>/<File.irpt>
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jstsg/home
Details: No details available.
Please share your thoughts on this.
Regards,
Chanti.

Hi Chanti,
This sounds obvious, but check to make sure your irpt page has the extension .irpt in the workbench. Depending on how you saved it, it might have been dropped.
Also make sure the page is published by either saving it to web:// (not db://) or by right clicking and selecting Publish.
Regards,
Mike

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

Runtime error when executing ME2B/ME3B if condition recs 160

Dear all,
I have created a vendor rebate agreement and entered condition records for a vendor/material combination.
Since for this vendor there are 170 materials for which he provides rebate I have created 170 condition records.
When I am trying to change or display the rebate agreement by executing transaction codes ME2B and ME3B respectively the following run time error occurs (Runtime error when executing transaction codes ME2B/ME3B for condition recrds >160):
Runtime Errors: DBIF_RSQL_INVALID_RSQL
Except. CX_SY_OPEN_SQL_DB
The error is in function module SELECT_TEXT at line 120 "select * from stxh client specified into table stxh_buffer".
When I debug or test/execute the function module SELECT_TEXT, I find that there are no relevant entries in table STXH for the vendor rebate agreements.
Please note that if the condition records of the rebate agreement are 160 and less then there is no problem.
I would appreciate if I could have your expert oppinion on what is causing this runtime error and if it is possible on how to resolve it.
Thanks in advance.
Regards,
Mimis
Edited by: Mimis1973 on Jan 26, 2011 11:18 AM
Edited by: Mimis1973 on Jan 26, 2011 11:20 AM
Edited by: Mimis1973 on Jan 26, 2011 11:23 AM

There's something similar in OSS note 1002788. Is it relevant to your system?

Error processing request in sax parser: Error when executing statement...

Hello,
I want to INSERT data from R/3 System to AS400 via JDBC adapter into a DB2 database. The interfaces from R/3 are Ok. but i have some problems to use the JDBC in DB2 Systems. The message in comunitation channel is:
" Error processing request in sax parser: Error when executing statement for table/stored proc. 'SPE106TST' (structure 'STATEMENT'): java.sql.SQLException: SPE106TST de SADMT1 no válido para la operación."
in the SXMB_MONI -> Request Message Mapping payloads this:
The connection to the database is fine, Sender adapter with a SELECT * works perfect.
Please Can anyone help me solve this problem? I'm lost.
Best regards,
Edited by: Nicola Occhipinti on May 22, 2008 7:40 PM

Hi Nicola,
This error occurs when the receiver side structure is incorrect.
Your structure seems to be correct.
Please use lower case for action, access and table.
Please check whether the field names are exactly the same as in the actual Database table sadmt1.SPE106TST.
Check if the table has permissions to write.
You can try an alternate structure without using table tag.
<ns0:MT_XMLSQL_SPEC xmlns:ns0="urn:damm.com/pi/EmployeeMasterData">
<STATEMENT>
<sadmt1.SPE106TST action="INSERT">
<access>
<CODEMP>D</CODEMP>
<CODPRO>00202339</CODPRO>
<NOMPRO>ROSIQUE PERALSGENIS</NOMPRO>
<DIRPRO>GIRONA</DIRPRO>
<POBPRO>S. VICENS HORTS</POBPRO>
<RUTA>0</RUTA>
<ORDEN>0</ORDEN>
<NOMINA>S</NOMINA>
</access>
</sadmt1.SPE106TST>
</STATEMENT>
</ns0:MT_XMLSQL_SPEC>
Hope your problem gets solved.
-Shamly

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Error when executing DBMS_ERRLOG pkg through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
it throws the following error...
ORA-01031: insufficient privileges
Please let me know the solution at the earliest.
Thanks.
-Saravanan

duplicate post
Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

Error when execute Load Plan

Similar Messages

Maybe you are looking for