Error While Posting the Asset Down Payment

Dear Members,
When I am doing Asset down payment through F-48, I am getting the following error.
Before that I would like to inform you that I created 2 GL Accounts. i.e. Down Payments on Assets ( Recon A/c Assets )  and Second GL A/c is Asset Clearing A/c ( With out Recon A/c ).
Further I assigned in T. Code -   AO90, I assigned the Down Payments on Assets GL A/c and In Clearing column I assigned the Asset Clearing A/c.
Even though it is giving the following error.
Item category 07000 not allowed in accounting transaction 1000/0001
Message no. GLT2001
Diagnosis
The online document splitting is active in your system. Here, each document is assigned to a accounting transaction variant and each document row to an item category.
You determine for each business transaction variant which item categories can or must be posted here.
The following error occurred for the document you entered:
Item category 07000 in accounting transaction 1000, variant 0001 is not allowed.
System Response
The document cannot be posted.
Procedure
Check the document entered, the derivation of the business transaction variant, the derivation of the item category, and the assignment of the item categories to the business transaction variant.
do the needful at the earliest.
Thanking You
Regards
K. S. Kumar

Hi Sai Kumar,
Go to Document splitting node..
And check against the doc type that you are using in F-48, what business transaction variant is assigned in Classify document types for Document Splitting.
next go to the following node....
Doc Splitting->Extended Doc Splitting-> Define Business Transaction variants
and select your business transaction variant as defined above and copy that and give it a name Z001,
now select Z001 and double click on Assigned Item categories.., then select new entries and add 07000 Asset there and save.. it will give a warning message but just go on saving.
next go to the node Classify document types for Document Splitting again and enter this Business transaction variant againt the document type that u r using in F-48. AND it will work.
Regards,
SAPFICO

Similar Messages

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

  • While posting the Asset in f-90 the serives tax is not calculting

    hi experts,
    While posting the Asset in f-90 the serives tax is not calculating,even i entered in bussiness place?
    thanks in advance
    satya

    hi expert
    i didnot get the field to enter the tax code while postring the f-90 even i went through the related g/l account and tax code assigned in master data,i went through the field status varient and posting key.
    but i am unable to get serives tax field,i am entering the business place field also.
    thanks in advance
    satya

  • Error While doing the Asset Credit Memo -ABGL

    HI,
    While doing the Asset Credit Memo -ABGL,i am getting the below error.Kindly help me with your inputs.
    Balance for transaction type group 10 negative for the area 01
    Message no. AA629
    Asset affected: 406000000004-0000
    Diagnosis
    With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
    System response
    The system rejects this posting.
    Procedure
    Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
    Thanks
    Supriya

    Check your config in OABN / OADB
    The depriciation area 01 can allow you post values only postive .. in OADB
    it has maintained Acquisition values Postive or zero values and net book
    values has miantained Postive or 0 values. so based on this setting u cannt
    post any negative values for this asset.

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting the IDoc for Customer Invoice.

    hi,
    I m posting Customer Invoice through LSMW using IDocs.
    Basic type is FIDCCP02 and message is FIDCC2.
    While posting the Idoc I m getting error as:
    'Document or line item does not exist for invoice reference'.
    I m not getting the error why it is asking for invoice reference because
    in FB01 it is not asking for any reference or anything.
    Even in f-22 also it is not asking for the same.
    In Idoc all the item level values are coming prorperly.
    If anybody worked on such issues then please reply.
    -Thanx.
    -Umesh

    Hi,
    Where you able to resolve your issue, I would appreciate if you can share the solution.
    Thanks

  • Error while posting the CREMAS03 Idoc

    Hi
    I a getting the Error while posting CREMAS03 idoc from File
    The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
    but when i cheked with the functional guys , the comany code exits..
    Any one have any idea
    SV

    Hey,
        seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
    Steps for ALE settings:-
    Steps for XI
    Step 1)
         Goto SM59.
         Create new RFC destination of type 3(Abap connection).
         Give a suitable name and description.
         Give the Ip address of the R3 system.
         Give the system number.
         Give the gateway host name and gateway service (3300 + system number).
         Go to the logon security tab.
         Give the lang, client, username and password.
         Test connection and remote logon.
    Step 2)
         Goto IDX1.
         Create a new port.
         Give the port name.
         Give the client number for the R3 system.
         Select the created Rfc Destination.
    Step 3)
         Goto IDX2
         Create a new Meta data.
         Give the Idoc type.
         Select the created port.
    Steps for R3.
    Step 1)
         Goto SM59.
         Create new RFC destination of type 3(Abap connection).
         Give a suitable name and description.
         Give the Ip address of the XI system.
         Give the system number.
         Give the gateway host name and gateway service (3300 + system number).
         Go to the logon security tab.
         Give the lang, client, username and password.
         Test connection and remote logon.
    Step 2)
         Goto WE21.
         Create a port under transactional RFC.(R3->XI)
         Designate the RFC destination created in prev step.
    Step 3)
         Goto SALE.
         Basic settings->Logical Systems->Define logical system.
         Create two logical systems(one for XI and the other for R3)
         Basic settings->Logical Systems->Assign logical system.
         Assign the R3 logical system to respective client.
    Step 4)
         Goto WE20.
         Partner type LS.
         Create two partner profile(one for XI the other for R3).
         Give the outbound or inbound message type based on the direction.
    Step 5)
         Goto WE19
         Give the basic type and execute.
         fill in the required fields.
         Goto IDOC->edit control records.
         Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
         Click outbound processing.
    Step 6)
         Go to SM58
         if there are any messages then there is some error in execution.
         Goto WE02.
         Check the status of the IDOC.
         Goto WE47.
         TO decode the status code.
    Step 7)
         Not mandatory.
         Goto BD64.
         Click on Create model view.
         Add message type.
    BD87 to check the status of IDOC.
    In case if not authorized then go to the target system and check in SU53, see for the missing object
    and assign it to the user.

  • ERROR  WHILE POSTING  THE STOCK  OF MATERIAL

    Dear experts
    while  posting  the stock  of  material  iam  getting  the error  'number ranges for transevent type WA in year 2011 does not exist.
    what  transaction  should  be  used  .
    Thanks & Regards.
    Erfan.

    Dear,
    First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
    For Example there it is 01, then got to FBN1, enter company code and give  give 01 and against this maintain number.
    Hope this helps!!!
    Br,Vivek

  • Error while posting the payroll results to accounts

    Dear all,
    Im facing a issue while posting the payroll results to the accounts in T.code PC00_M99_CIPE,
    The error log says...
    Inconsistence in payroll results (tables V0/RT)
    Diagnosis:
    An inconsistency results has been found during the evaluation of the payroll results. No referenced entry has been found in table V0.
    Can anybody suggest me wat i hav to do...
    Thanks & regards
    Gopinath.Balakrishnan

    Hi
    Check whether the user is having the authorisation for the t.code PC_PAYRESULT or PC00_M40-PAYRESULT.
    Because some times HR user will run the payroll and FI user will do the postings. If FI user is doing the postings, in general he will not have the authorisation for HR T.codes, then system will give such kind of errors.
    If not check the paryoll results and control record.
    Thanks & Regards
    Bharathi

  • Error While posting the Budget Update(BPUP)

    We are getting an error message u201CError when saving the Budget Updateu201D while posting the Budget Update (BPUP). I have filed all mandatory requirements in the transaction.
    I couldnu2019t able to find out reason for this error message. Please help me on this.

    Hi,
    Where you able to resolve your issue, I would appreciate if you can share the solution.
    Thanks

  • Error while posting the Goods Receipt

    Hi Friends,
    I am having an issue while posting the Goods Receipt.
    I am getting the error "Balance not zero: 1.000,00- debit: 0,00 credit: 1.000,00". I am using the Purchase Order with Account Assignment category P and K. When ever I used the account assignment category, I am getting this type of error. I have checked the configuration and every thing is OK. System is not able to debit the G/L account which is mentioned in the Purchase Order, hence the problem. However, I think system is able to get the G/L account (to Credit the amount) from Automatic Account determination.
    Would like to know if any one come across similar type of problem and resolved it.
    We have recently upgraded the system from 4.7 to ECC 6.0.
    Apprciate the help.
    Thank you,
    Prakash

    Hi
    Thank you for the reply.
    I have checked what you have mentioned. While creating PO it is determining the G/L account automatically through the assignments in OBYC. Even then I am getting the error while doing the Goods Receipt.
    Any one is having any idea?
    Thank you,
    Prakash
    Edited by: Prakash KM on Dec 17, 2010 6:26 PM

  • Direct store Delivery : Error while posting the customer payment in FSR

    Dear Experts,
    We are in the process of DSD implementation at customer place. We are facing the following isuse , your help will be highly appriciated
    This is with respect to an error we are facing when the collection clearing
    process iin final settlement Run.
    The details of the same are as follows:
    Transaction code: /DSD/SL_COCKPIT
    Area: Payment Posting
    Error: Balancing field "Profit Center" in line item 001 not filled
    The customer line item of the invoice being cleared has been assigned
    the profit center as part of the document splitting at the stage of
    invoicing to the customer.
    The bank account/cash account to be posted at the time of clearing in
    DSD settlement process is not capable of being provided as input nor
    available for configuration in the DSD section in IMG.
    regards
    Neleesh

    Hi
    Did you find the solution to this error. We are also facing the same issue while posting payment against the payment method 'Check'.
    Kindly help please.
    Regards
    Noman Rasheed

  • Error while creating the ASSET using LSMW BAPI method ( BUS1022 )

    Hello,
    Im creating assets using the below LSMW BAPI method
    Business Object      BUS1022     
    Method                     CREATEINCLVALUES
    Message Type         FIXEDASSET_CREATEINCLVALU
    Basic Type              FIXEDASSET_CREATEINCLVALU
    the following errors were triggered while populating the values to ACQ_VALUE and ORD_DEP value.
    Correction to ordinary dep. greater than acc. dep. in area 01
    Correction to ordinary dep. greater than acc. dep. in area 30
    Correction to ordinary dep. greater than acc. dep. in area 31
    Correction to ordinary dep. greater than acc. dep. in area 32
    if i pass only ACQ_VALUE, I am able to create the asset with out any issues.
    Can you guys plz guide me to fix this issue to create the asset with both ACQ_VALUE and ORD_DEP values??
    Cheers,
    Sriram.

    Hello,
    Review AO21.
    Regards
    Waza

  • Error while reversing the asset accounting document through t code AB08

    Hello All,
    i have one query where the user has scrapped the assets through T code ABAVN in the month Dec 2009 with doc date of Nov 30th 2009. Now he realised that the posting was wrong and he wants to reverse it in 1st of Jan 2010 with the t code AB08. when we click on the reverse button in t code AB08, system is by defaultly taking the fiscal year, posting date and period, only we need to give the reason code. here user is trying to give the reversal date manually and making the posting. Now system is giving an error "Reversal in different fiscal year is not possible" with the message AA487.
    we are using SAP ECC 5.0 and i got SAP 1393737 for this and it is mention that there is a program error and needs to implement the program corrections.
    Please can any one suggest me, is that correct approach or should i need to follow the another work around to resolve this issue.
    Thanks in advance.
    Regards,
    Venkat

    Reversal in different fiscal year is not possible in the Standard        
    system since it will affect your balance sheet and other accounting      
    legal report.                                                                               
    It is not possible in FI-AA to reverse       
    a document in this way,  "because of the calculation of depreciation"                                                                               
    The reasons are:                                                                               
    1. The reconciliation of FI and FI-AA must be ensured, and therefore     
       Posting and Asset Value Date must be in the same fiscal year.                                                                               
    2. Depreciation of aquisitions posted in the previous year, are          
      not automatically corrected, when you post a reversal.                                                                               
    One way is to open the previous period(previous fiscal year) and post    
    the reversal to the same fiscal year. PLEASE NOTE THIS IS ONLY IF YOU    
    HAVE NOT EXECUTED YEAR END CLOSING TRANSACTIONS.     
    Blaz

  • Error while posting the material

    Hi experts,
    While intially posting the material in Mb1c by movement type 561.
    while saving it show the below error
    "Account determination for entry GKR GBB ____ BSA 3000 not possible"
    pls help
    regards
    arun

    Have u checked this first
    go to OMWD and put the valution grouping code may be u r using 0001 for ur valuating area (plant) and company combination
    hear this is missing so u r having the error
    if yes
    then go to OBYC
    click on gbb give chart of account i think in ur case its GKR then find entry with
    0001 BSA 3000 GL or
    BSA 3000 GL
    if this entru is missing
    the ask ur fi person to creat gl account to initial balace upload in FS00
    may be copy of 399999 std sap have for copmpanyt code 1000
    and creat a entry
    0001 BSA 3000 GL
    BSA 3000 GL
    hope this will clear ur issue
    Reward if issue solved
    Message was edited by:
            Umakant Bhangale

Maybe you are looking for

  • Error 1401 when installing cs4 on windows 8

    I'm getting this error when installing Adobe Creative Suite 4 Error 1603. Error 1401.Could not create key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

  • Post-Upgrade Mail Problems

    After upgrading on both a Mac Pro and MacBook Pro I encountered several problems with Mail. On MacBook Pro: Unable to receive email for certain accounts Was able to delete the offending accounts and add them and this solved the problem. On Mac Pro: U

  • Switching from pc to mac mini

    im thinking of changng my pc to a mac mini to take up less space plus im sick of the noise from pc. it is a quadcore 2.5 with a 1gb graphics card. wat would be the best mini to go for im not really worried about performance or games anymore grown out

  • I need a ringtone to alert me when i have a missed call?  can someone help?

    i need a ringtone to alert me when i have a missed call?  can someone help?

  • How to set 2 standard calendars

    Hi all, is it possible to set 2 calendars as standard calendars? I want to create an event who then occures in my private and in a shared calendar. Is this possible? Regards Cassandra